! Started logfile: J1322-0937_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:28:19 2017 obs J1322-0937_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J1322-0937_S_2014_01_04_pus_uva.fits ! AN table 1: 76 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.597222 visibilities/baseline/integration-bin. ! Found source: J1322-0937 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 6536 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1322-0937_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 152 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 152 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 152 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 152 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.920863Jy sigma=0.007171 ! Fit after self-cal, rms=0.889621Jy sigma=0.006865 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.64 mas, bmaj=5.729 mas, bpa=-0.2927 degrees ! Estimated noise=1395.55 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.296906 Jy ! Component: 100 - total flux cleaned = 0.363449 Jy ! Total flux subtracted in 100 components = 0.363449 Jy ! Clean residual min=-0.017726 max=0.024226 Jy/beam ! Clean residual mean=0.000033 rms=0.005218 Jy/beam ! Combined flux in latest and established models = 0.363449 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.363449 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.770006Jy sigma=0.001479 ! Fit after self-cal, rms=0.770009Jy sigma=0.001479 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.093 mas, bmaj=6.542 mas, bpa=-0.8639 degrees ! Estimated noise=901.968 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0307948 Jy ! Component: 100 - total flux cleaned = 0.0441121 Jy ! Component: 150 - total flux cleaned = 0.0513354 Jy ! Component: 200 - total flux cleaned = 0.0559237 Jy ! Total flux subtracted in 200 components = 0.0559237 Jy ! Clean residual min=-0.015436 max=0.017043 Jy/beam ! Clean residual mean=0.000028 rms=0.004384 Jy/beam ! Combined flux in latest and established models = 0.419373 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 40 components and 0.419373 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.762068Jy sigma=0.001503 ! Fit after self-cal, rms=0.762075Jy sigma=0.001502 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.85 KP 1.00* LA 1.05 ! MK 1.00 NL 1.03 OV 0.96 PT 1.05 ! SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.34 FD 1.09 KP 1.00* LA 0.99 ! MK 0.97 NL 1.05 OV 1.04 PT 1.00 ! SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.17 KP 1.00* LA 0.82 ! MK 1.02 NL 1.05 OV 0.94 PT 0.98 ! SC 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.29 FD 1.04 KP 1.00* LA 0.89 ! MK 0.99 NL 1.07 OV 1.04 PT 0.98 ! SC 0.95 ! ! ! Fit before self-cal, rms=0.762075Jy sigma=0.001502 ! Fit after self-cal, rms=0.751305Jy sigma=0.001356 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.05 mas, bmaj=6.594 mas, bpa=-0.9716 degrees ! Estimated noise=943.69 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0174286 Jy ! Component: 100 - total flux cleaned = 0.0250261 Jy ! Component: 150 - total flux cleaned = 0.0263329 Jy ! Component: 200 - total flux cleaned = 0.0264794 Jy ! Total flux subtracted in 200 components = 0.0264794 Jy ! Clean residual min=-0.025024 max=0.015578 Jy/beam ! Clean residual mean=0.000004 rms=0.005140 Jy/beam ! Combined flux in latest and established models = 0.445852 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 49 components and 0.445852 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.747051Jy sigma=0.001371 ! Fit after self-cal, rms=0.747039Jy sigma=0.001370 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.747039Jy sigma=0.001370 ! Fit after self-cal, rms=0.109362Jy sigma=0.000903 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.06 mas, bmaj=6.558 mas, bpa=-0.8986 degrees ! Estimated noise=938.666 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000322165 Jy ! Component: 100 - total flux cleaned = 0.000286563 Jy ! Component: 150 - total flux cleaned = 0.000253345 Jy ! Component: 200 - total flux cleaned = 0.000281436 Jy ! Total flux subtracted in 200 components = 0.000281436 Jy ! Clean residual min=-0.003406 max=0.003796 Jy/beam ! Clean residual mean=0.000005 rms=0.000884 Jy/beam ! Combined flux in latest and established models = 0.446133 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 54 components and 0.446133 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109337Jy sigma=0.000903 ! Fit after self-cal, rms=0.109247Jy sigma=0.000899 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (22.5, -20.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00235178 Jy ! Component: 100 - total flux cleaned = 0.00244923 Jy ! Component: 150 - total flux cleaned = 0.00227123 Jy ! Component: 200 - total flux cleaned = 0.00227292 Jy ! Total flux subtracted in 200 components = 0.00227292 Jy ! Clean residual min=-0.002998 max=0.003379 Jy/beam ! Clean residual mean=0.000005 rms=0.000783 Jy/beam ! Combined flux in latest and established models = 0.448406 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 72 components and 0.448406 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109118Jy sigma=0.000898 ! Fit after self-cal, rms=0.109107Jy sigma=0.000898 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109107Jy sigma=0.000898 ! Fit after self-cal, rms=0.109052Jy sigma=0.000898 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.059 mas, bmaj=6.557 mas, bpa=-0.8749 degrees ! Estimated noise=938.297 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000788252 Jy ! Component: 100 - total flux cleaned = 0.00101412 Jy ! Component: 150 - total flux cleaned = 0.000937211 Jy ! Component: 200 - total flux cleaned = 0.000937091 Jy ! Total flux subtracted in 200 components = 0.000937091 Jy ! Clean residual min=-0.002794 max=0.003067 Jy/beam ! Clean residual mean=0.000004 rms=0.000743 Jy/beam ! Combined flux in latest and established models = 0.449344 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 79 components and 0.449344 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109016Jy sigma=0.000897 ! Fit after self-cal, rms=0.109017Jy sigma=0.000897 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000385541 Jy ! Component: 100 - total flux cleaned = 0.000415196 Jy ! Component: 150 - total flux cleaned = 0.000356908 Jy ! Component: 200 - total flux cleaned = 0.000329103 Jy ! Total flux subtracted in 200 components = 0.000329103 Jy ! Clean residual min=-0.002796 max=0.002943 Jy/beam ! Clean residual mean=0.000004 rms=0.000729 Jy/beam ! Combined flux in latest and established models = 0.449673 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 87 components and 0.449673 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108999Jy sigma=0.000897 ! Fit after self-cal, rms=0.109000Jy sigma=0.000897 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109000Jy sigma=0.000897 ! Fit after self-cal, rms=0.109044Jy sigma=0.000897 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.84 mas, bmaj=12.43 mas, bpa=6.461 degrees ! Estimated noise=1237.32 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000292359 Jy ! Component: 100 - total flux cleaned = 0.000480205 Jy ! Component: 150 - total flux cleaned = 0.000530697 Jy ! Component: 200 - total flux cleaned = 0.000530452 Jy ! Total flux subtracted in 200 components = 0.000530452 Jy ! Clean residual min=-0.003620 max=0.003633 Jy/beam ! Clean residual mean=0.000009 rms=0.001110 Jy/beam ! Combined flux in latest and established models = 0.450203 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 94 components and 0.450203 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109043Jy sigma=0.000897 ! Fit after self-cal, rms=0.109045Jy sigma=0.000897 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000108727 Jy ! Component: 100 - total flux cleaned = 0.00017978 Jy ! Component: 150 - total flux cleaned = 0.000179252 Jy ! Component: 200 - total flux cleaned = 0.000179805 Jy ! Total flux subtracted in 200 components = 0.000179805 Jy ! Clean residual min=-0.003580 max=0.003582 Jy/beam ! Clean residual mean=0.000008 rms=0.001097 Jy/beam ! Combined flux in latest and established models = 0.450383 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 99 components and 0.450383 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109045Jy sigma=0.000897 ! Fit after self-cal, rms=0.109046Jy sigma=0.000897 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.059 mas, bmaj=6.557 mas, bpa=-0.8541 degrees ! Estimated noise=938.696 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.059 x 6.557 at -0.8541 degrees (North through East) ! Clean map min=-0.0026049 max=0.39995 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.604 mas, bmaj=5.731 mas, bpa=-0.2105 degrees ! Estimated noise=1451.7 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.308862 Jy ! Component: 100 - total flux cleaned = 0.379684 Jy ! Component: 150 - total flux cleaned = 0.407146 Jy ! Component: 200 - total flux cleaned = 0.420555 Jy ! Total flux subtracted in 200 components = 0.420555 Jy ! Clean residual min=-0.007408 max=0.007086 Jy/beam ! Clean residual mean=0.000009 rms=0.001673 Jy/beam ! Combined flux in latest and established models = 0.420555 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.420555 Jy ! Inverting map and beam ! Estimated beam: bmin=3.059 mas, bmaj=6.557 mas, bpa=-0.8541 degrees ! Estimated noise=938.696 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0112069 Jy ! Component: 100 - total flux cleaned = 0.0175161 Jy ! Component: 150 - total flux cleaned = 0.0217101 Jy ! Component: 200 - total flux cleaned = 0.0237591 Jy ! Total flux subtracted in 200 components = 0.0237591 Jy ! Clean residual min=-0.003705 max=0.003624 Jy/beam ! Clean residual mean=0.000007 rms=0.000878 Jy/beam ! Combined flux in latest and established models = 0.444314 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 63 components and 0.444314 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.84 mas, bmaj=12.43 mas, bpa=6.461 degrees ! Estimated noise=1237.32 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00273079 Jy ! Component: 100 - total flux cleaned = 0.00375024 Jy ! Component: 150 - total flux cleaned = 0.00447144 Jy ! Component: 200 - total flux cleaned = 0.0048578 Jy ! Total flux subtracted in 200 components = 0.0048578 Jy ! Clean residual min=-0.003798 max=0.003711 Jy/beam ! Clean residual mean=0.000010 rms=0.001158 Jy/beam ! Combined flux in latest and established models = 0.449172 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00018704 Jy ! Component: 100 - total flux cleaned = 0.000312285 Jy ! Component: 150 - total flux cleaned = 0.000366328 Jy ! Component: 200 - total flux cleaned = 0.000389735 Jy ! Total flux subtracted in 200 components = 0.000389735 Jy ! Clean residual min=-0.003636 max=0.003629 Jy/beam ! Clean residual mean=0.000009 rms=0.001123 Jy/beam ! Combined flux in latest and established models = 0.449562 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 90 components and 0.449562 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.059 mas, bmaj=6.557 mas, bpa=-0.8541 degrees ! Estimated noise=938.696 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.85945e-06 Jy ! Component: 100 - total flux cleaned = 0.000121183 Jy ! Component: 150 - total flux cleaned = 0.000126208 Jy ! Component: 200 - total flux cleaned = 8.62756e-05 Jy ! Total flux subtracted in 200 components = 8.62756e-05 Jy ! Clean residual min=-0.002781 max=0.002767 Jy/beam ! Clean residual mean=0.000004 rms=0.000728 Jy/beam ! Combined flux in latest and established models = 0.449648 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 113 components and 0.449648 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109065Jy sigma=0.000897 ! Fit after self-cal, rms=0.109064Jy sigma=0.000897 wmodel J1322-0937_S_2014_01_04_pus_map.mod ! Writing 113 model components to file: J1322-0937_S_2014_01_04_pus_map.mod wobs J1322-0937_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J1322-0937_S_2014_01_04_pus_uvs.fits wwins J1322-0937_S_2014_01_04_pus_map.win ! wwins: Wrote 2 windows to J1322-0937_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000367874 Jy ! Component: 100 - total flux cleaned = 0.0005153 Jy ! Component: 150 - total flux cleaned = 0.000605951 Jy ! Component: 200 - total flux cleaned = 0.000560147 Jy ! Component: 250 - total flux cleaned = 0.000643505 Jy ! Component: 300 - total flux cleaned = 0.000562799 Jy ! Component: 350 - total flux cleaned = 0.000602059 Jy ! Component: 400 - total flux cleaned = 0.000676796 Jy ! Component: 450 - total flux cleaned = 0.000641085 Jy ! Component: 500 - total flux cleaned = 0.000571243 Jy ! Component: 550 - total flux cleaned = 0.000536745 Jy ! Component: 600 - total flux cleaned = 0.000405106 Jy ! Component: 650 - total flux cleaned = 0.000373104 Jy ! Component: 700 - total flux cleaned = 0.000280142 Jy ! Component: 750 - total flux cleaned = 0.000219487 Jy ! Component: 800 - total flux cleaned = 7.11561e-05 Jy ! Component: 850 - total flux cleaned = -4.49467e-05 Jy ! Component: 900 - total flux cleaned = -0.000130396 Jy ! Component: 950 - total flux cleaned = -0.000241743 Jy ! Component: 1000 - total flux cleaned = -0.000296316 Jy ! Component: 1050 - total flux cleaned = -0.000350259 Jy ! Component: 1100 - total flux cleaned = -0.000507784 Jy ! Component: 1150 - total flux cleaned = -0.000661838 Jy ! Component: 1200 - total flux cleaned = -0.000813744 Jy ! Component: 1250 - total flux cleaned = -0.000963466 Jy ! Component: 1300 - total flux cleaned = -0.00115975 Jy ! Component: 1350 - total flux cleaned = -0.0013048 Jy ! Component: 1400 - total flux cleaned = -0.00149583 Jy ! Component: 1450 - total flux cleaned = -0.00170793 Jy ! Component: 1500 - total flux cleaned = -0.00191713 Jy ! Component: 1550 - total flux cleaned = -0.00210089 Jy ! Component: 1600 - total flux cleaned = -0.00228229 Jy ! Component: 1650 - total flux cleaned = -0.0024395 Jy ! Component: 1700 - total flux cleaned = -0.00261669 Jy ! Component: 1750 - total flux cleaned = -0.00277011 Jy ! Component: 1800 - total flux cleaned = -0.00287839 Jy ! Component: 1850 - total flux cleaned = -0.00307138 Jy ! Component: 1900 - total flux cleaned = -0.00319851 Jy ! Component: 1950 - total flux cleaned = -0.00338696 Jy ! Component: 2000 - total flux cleaned = -0.00349057 Jy ! Component: 2050 - total flux cleaned = -0.00363469 Jy ! Component: 2100 - total flux cleaned = -0.00385875 Jy ! Component: 2150 - total flux cleaned = -0.00401995 Jy ! Component: 2200 - total flux cleaned = -0.00419997 Jy ! Component: 2250 - total flux cleaned = -0.0043386 Jy ! Component: 2300 - total flux cleaned = -0.00451529 Jy ! Component: 2350 - total flux cleaned = -0.00463216 Jy ! Component: 2400 - total flux cleaned = -0.00476721 Jy ! Component: 2450 - total flux cleaned = -0.00493926 Jy ! Component: 2500 - total flux cleaned = -0.00507196 Jy ! Component: 2550 - total flux cleaned = -0.00520378 Jy ! Component: 2600 - total flux cleaned = -0.00531566 Jy ! Component: 2650 - total flux cleaned = -0.00538984 Jy ! Component: 2700 - total flux cleaned = -0.00550018 Jy ! Component: 2750 - total flux cleaned = -0.00559146 Jy ! Component: 2800 - total flux cleaned = -0.00571814 Jy ! Component: 2850 - total flux cleaned = -0.00580793 Jy ! Component: 2900 - total flux cleaned = -0.00591499 Jy ! Component: 2950 - total flux cleaned = -0.00596802 Jy ! Component: 3000 - total flux cleaned = -0.00610901 Jy ! Component: 3050 - total flux cleaned = -0.00619653 Jy ! Component: 3100 - total flux cleaned = -0.00626593 Jy ! Component: 3150 - total flux cleaned = -0.00635225 Jy ! Component: 3200 - total flux cleaned = -0.00643809 Jy ! Component: 3250 - total flux cleaned = -0.00650643 Jy ! Component: 3300 - total flux cleaned = -0.00652358 Jy ! Component: 3350 - total flux cleaned = -0.00664185 Jy ! Component: 3400 - total flux cleaned = -0.00672586 Jy ! Component: 3450 - total flux cleaned = -0.00677598 Jy ! Component: 3500 - total flux cleaned = -0.00682583 Jy ! Component: 3550 - total flux cleaned = -0.00692498 Jy ! Component: 3600 - total flux cleaned = -0.00702366 Jy ! Component: 3650 - total flux cleaned = -0.00705634 Jy ! Component: 3700 - total flux cleaned = -0.00717021 Jy ! Component: 3750 - total flux cleaned = -0.00720252 Jy ! Component: 3800 - total flux cleaned = -0.00726694 Jy ! Component: 3850 - total flux cleaned = -0.00734699 Jy ! Component: 3900 - total flux cleaned = -0.00739479 Jy ! Component: 3950 - total flux cleaned = -0.00742656 Jy ! Component: 4000 - total flux cleaned = -0.00744241 Jy ! Component: 4050 - total flux cleaned = -0.007537 Jy ! Total flux subtracted in 4096 components = -0.00753701 Jy ! Clean residual min=-0.001033 max=0.000906 Jy/beam ! Clean residual mean=0.000000 rms=0.000265 Jy/beam ! Combined flux in latest and established models = 0.442111 Jy keep ! Adding 253 model components to the UV plane model. ! The established model now contains 366 components and 0.442111 Jy ![Exited script file: muppet] wmap "J1322-0937_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.059 x 6.557 at -0.8541 degrees (North through East) ! Clean map min=-0.0027958 max=0.40064 Jy/beam ! Writing clean map to FITS file: J1322-0937_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.40064 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000251724 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.188492 0.188492 0.376984 0.753967 1.50793 3.01587 6.03174 12.0635 24.127 48.2539 96.5078 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.4 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.059 x 6.557 at -0.8541 degrees (North through East) ! Clean map min=-0.0027958 max=0.40064 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1322-0937_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:28:23 2017