! Started logfile: J1322+3912_S_2014_08_05_pus_uvs.log on Sun Nov 13 17:28:34 2016 obs J1322+3912_S_2014_08_05_pus_uva.fits ! Reading UV FITS file: J1322+3912_S_2014_08_05_pus_uva.fits ! AN table 1: 91 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.690354 visibilities/baseline/integration-bin. ! Found source: J1322+3912 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 360 lines of history. ! ! Reading 11308 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1322+3912_S_2014_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 149 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 149 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 149 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 149 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.888058Jy sigma=0.010469 ! Fit after self-cal, rms=0.855080Jy sigma=0.010049 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.647 mas, bmaj=7.424 mas, bpa=24.04 degrees ! Estimated noise=895.063 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.113763 Jy ! Component: 100 - total flux cleaned = 0.138628 Jy ! Total flux subtracted in 100 components = 0.138628 Jy ! Clean residual min=-0.005186 max=0.007028 Jy/beam ! Clean residual mean=0.000005 rms=0.001338 Jy/beam ! Combined flux in latest and established models = 0.138628 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.138628 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080089Jy sigma=0.000805 ! Fit after self-cal, rms=0.080079Jy sigma=0.000805 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.608 mas, bmaj=8.143 mas, bpa=24.31 degrees ! Estimated noise=582.169 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00753691 Jy ! Component: 100 - total flux cleaned = 0.0113215 Jy ! Component: 150 - total flux cleaned = 0.0135624 Jy ! Component: 200 - total flux cleaned = 0.0149587 Jy ! Total flux subtracted in 200 components = 0.0149587 Jy ! Clean residual min=-0.002900 max=0.002748 Jy/beam ! Clean residual mean=0.000004 rms=0.000701 Jy/beam ! Combined flux in latest and established models = 0.153587 Jy ! Performing phase self-cal ! Adding 57 model components to the UV plane model. ! The established model now contains 59 components and 0.153587 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079132Jy sigma=0.000798 ! Fit after self-cal, rms=0.079135Jy sigma=0.000798 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.87 HN 0.97 KP 1.06 ! LA 1.12 MK 1.00* NL 0.98 OV 0.97 ! PT 1.04 SC 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.05 HN 1.05 KP 1.04 ! LA 1.06 MK 1.00* NL 1.04 OV 1.00 ! PT 1.02 SC 1.07 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.17 HN 1.03 KP 0.91 ! LA 0.82 MK 1.00* NL 0.99 OV 0.93 ! PT 1.00 SC 1.03 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.00 HN 1.05 KP 0.89 ! LA 0.80 MK 1.00* NL 1.07 OV 1.00 ! PT 1.03 SC 0.95 ! ! ! Fit before self-cal, rms=0.079135Jy sigma=0.000798 ! Fit after self-cal, rms=0.076019Jy sigma=0.000778 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.609 mas, bmaj=8.193 mas, bpa=24.3 degrees ! Estimated noise=581.461 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000560072 Jy ! Component: 100 - total flux cleaned = -0.000651465 Jy ! Component: 150 - total flux cleaned = -0.000691519 Jy ! Component: 200 - total flux cleaned = -0.000736532 Jy ! Total flux subtracted in 200 components = -0.000736532 Jy ! Clean residual min=-0.001778 max=0.001883 Jy/beam ! Clean residual mean=-0.000006 rms=0.000462 Jy/beam ! Combined flux in latest and established models = 0.152851 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 73 components and 0.152851 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076013Jy sigma=0.000778 ! Fit after self-cal, rms=0.076002Jy sigma=0.000777 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076002Jy sigma=0.000777 ! Fit after self-cal, rms=0.074843Jy sigma=0.000776 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.605 mas, bmaj=8.223 mas, bpa=24.21 degrees ! Estimated noise=581.158 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000786931 Jy ! Component: 100 - total flux cleaned = -0.00104699 Jy ! Component: 150 - total flux cleaned = -0.00110442 Jy ! Component: 200 - total flux cleaned = -0.0011392 Jy ! Total flux subtracted in 200 components = -0.0011392 Jy ! Clean residual min=-0.001481 max=0.001482 Jy/beam ! Clean residual mean=-0.000004 rms=0.000404 Jy/beam ! Combined flux in latest and established models = 0.151711 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 86 components and 0.151711 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074835Jy sigma=0.000776 ! Fit after self-cal, rms=0.074822Jy sigma=0.000776 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.39955e-05 Jy ! Component: 100 - total flux cleaned = -4.92844e-05 Jy ! Component: 150 - total flux cleaned = -4.29231e-05 Jy ! Component: 200 - total flux cleaned = -3.67608e-05 Jy ! Total flux subtracted in 200 components = -3.67608e-05 Jy ! Clean residual min=-0.001454 max=0.001468 Jy/beam ! Clean residual mean=-0.000004 rms=0.000403 Jy/beam ! Combined flux in latest and established models = 0.151675 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 91 components and 0.151675 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074821Jy sigma=0.000776 ! Fit after self-cal, rms=0.074821Jy sigma=0.000776 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074821Jy sigma=0.000776 ! Fit after self-cal, rms=0.074851Jy sigma=0.000776 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.604 mas, bmaj=8.24 mas, bpa=24.19 degrees ! Estimated noise=580.993 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000510498 Jy ! Component: 100 - total flux cleaned = -0.000706022 Jy ! Component: 150 - total flux cleaned = -0.000742962 Jy ! Component: 200 - total flux cleaned = -0.000773242 Jy ! Total flux subtracted in 200 components = -0.000773242 Jy ! Clean residual min=-0.001488 max=0.001481 Jy/beam ! Clean residual mean=-0.000004 rms=0.000396 Jy/beam ! Combined flux in latest and established models = 0.150901 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 94 components and 0.150901 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074848Jy sigma=0.000776 ! Fit after self-cal, rms=0.074849Jy sigma=0.000776 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.80024e-05 Jy ! Component: 100 - total flux cleaned = -3.72775e-05 Jy ! Component: 150 - total flux cleaned = -2.75624e-05 Jy ! Component: 200 - total flux cleaned = -1.85204e-05 Jy ! Total flux subtracted in 200 components = -1.85204e-05 Jy ! Clean residual min=-0.001476 max=0.001470 Jy/beam ! Clean residual mean=-0.000004 rms=0.000395 Jy/beam ! Combined flux in latest and established models = 0.150883 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 102 components and 0.150883 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074849Jy sigma=0.000776 ! Fit after self-cal, rms=0.074848Jy sigma=0.000776 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074848Jy sigma=0.000776 ! Fit after self-cal, rms=0.074873Jy sigma=0.000776 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.812 mas, bmaj=10.45 mas, bpa=44.14 degrees ! Estimated noise=665.494 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000380522 Jy ! Component: 100 - total flux cleaned = -0.0005423 Jy ! Component: 150 - total flux cleaned = -0.000581236 Jy ! Component: 200 - total flux cleaned = -0.000608473 Jy ! Total flux subtracted in 200 components = -0.000608473 Jy ! Clean residual min=-0.001575 max=0.001410 Jy/beam ! Clean residual mean=-0.000007 rms=0.000440 Jy/beam ! Combined flux in latest and established models = 0.150274 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 105 components and 0.150274 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074872Jy sigma=0.000776 ! Fit after self-cal, rms=0.074873Jy sigma=0.000776 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.43589e-05 Jy ! Component: 100 - total flux cleaned = -2.40053e-05 Jy ! Component: 150 - total flux cleaned = -2.76988e-05 Jy ! Component: 200 - total flux cleaned = -3.08548e-05 Jy ! Total flux subtracted in 200 components = -3.08548e-05 Jy ! Clean residual min=-0.001576 max=0.001405 Jy/beam ! Clean residual mean=-0.000007 rms=0.000440 Jy/beam ! Combined flux in latest and established models = 0.150244 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 108 components and 0.150244 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074873Jy sigma=0.000776 ! Fit after self-cal, rms=0.074873Jy sigma=0.000776 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.604 mas, bmaj=8.251 mas, bpa=24.17 degrees ! Estimated noise=580.859 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.604 x 8.251 at 24.17 degrees (North through East) ! Clean map min=-0.0014863 max=0.14518 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.627 mas, bmaj=7.506 mas, bpa=23.9 degrees ! Estimated noise=896.992 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.113953 Jy ! Component: 100 - total flux cleaned = 0.138928 Jy ! Component: 150 - total flux cleaned = 0.145909 Jy ! Component: 200 - total flux cleaned = 0.148807 Jy ! Total flux subtracted in 200 components = 0.148807 Jy ! Clean residual min=-0.003419 max=0.003346 Jy/beam ! Clean residual mean=-0.000002 rms=0.000837 Jy/beam ! Combined flux in latest and established models = 0.148807 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.148807 Jy ! Inverting map and beam ! Estimated beam: bmin=4.604 mas, bmaj=8.251 mas, bpa=24.17 degrees ! Estimated noise=580.859 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00124318 Jy ! Component: 100 - total flux cleaned = 0.00137968 Jy ! Component: 150 - total flux cleaned = 0.00144694 Jy ! Component: 200 - total flux cleaned = 0.00151995 Jy ! Total flux subtracted in 200 components = 0.00151995 Jy ! Clean residual min=-0.001477 max=0.001642 Jy/beam ! Clean residual mean=-0.000004 rms=0.000400 Jy/beam ! Combined flux in latest and established models = 0.150327 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 28 components and 0.150327 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.812 mas, bmaj=10.45 mas, bpa=44.14 degrees ! Estimated noise=665.494 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.57589e-05 Jy ! Component: 100 - total flux cleaned = 2.82897e-05 Jy ! Component: 150 - total flux cleaned = 2.3847e-05 Jy ! Component: 200 - total flux cleaned = 1.95853e-05 Jy ! Total flux subtracted in 200 components = 1.95853e-05 Jy ! Clean residual min=-0.001583 max=0.001419 Jy/beam ! Clean residual mean=-0.000007 rms=0.000439 Jy/beam ! Combined flux in latest and established models = 0.150346 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.00481e-06 Jy ! Component: 100 - total flux cleaned = -7.52158e-06 Jy ! Component: 150 - total flux cleaned = -1.07053e-05 Jy ! Component: 200 - total flux cleaned = -1.36997e-05 Jy ! Total flux subtracted in 200 components = -1.36997e-05 Jy ! Clean residual min=-0.001584 max=0.001412 Jy/beam ! Clean residual mean=-0.000007 rms=0.000439 Jy/beam ! Combined flux in latest and established models = 0.150333 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 38 components and 0.150333 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.604 mas, bmaj=8.251 mas, bpa=24.17 degrees ! Estimated noise=580.859 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.74842e-05 Jy ! Component: 100 - total flux cleaned = -5.76956e-05 Jy ! Component: 150 - total flux cleaned = -1.80389e-05 Jy ! Component: 200 - total flux cleaned = 1.78313e-05 Jy ! Total flux subtracted in 200 components = 1.78313e-05 Jy ! Clean residual min=-0.001489 max=0.001601 Jy/beam ! Clean residual mean=-0.000004 rms=0.000397 Jy/beam ! Combined flux in latest and established models = 0.150351 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 46 components and 0.150351 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074885Jy sigma=0.000776 ! Fit after self-cal, rms=0.074885Jy sigma=0.000776 wmodel J1322+3912_S_2014_08_05_pus_map.mod ! Writing 46 model components to file: J1322+3912_S_2014_08_05_pus_map.mod wobs J1322+3912_S_2014_08_05_pus_uvs.fits ! Writing UV FITS file: J1322+3912_S_2014_08_05_pus_uvs.fits wwins J1322+3912_S_2014_08_05_pus_map.win ! wwins: Wrote 1 windows to J1322+3912_S_2014_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 4.97846e-05 Jy ! Component: 100 - total flux cleaned = -8.18874e-07 Jy ! Component: 150 - total flux cleaned = -7.29959e-05 Jy ! Component: 200 - total flux cleaned = -0.000142575 Jy ! Component: 250 - total flux cleaned = -0.000120063 Jy ! Component: 300 - total flux cleaned = -0.000185856 Jy ! Component: 350 - total flux cleaned = -0.000186098 Jy ! Component: 400 - total flux cleaned = -0.000227645 Jy ! Component: 450 - total flux cleaned = -0.000227472 Jy ! Component: 500 - total flux cleaned = -0.000266824 Jy ! Component: 550 - total flux cleaned = -0.000266768 Jy ! Component: 600 - total flux cleaned = -0.00024786 Jy ! Component: 650 - total flux cleaned = -0.00019224 Jy ! Component: 700 - total flux cleaned = -0.000174171 Jy ! Component: 750 - total flux cleaned = -0.000102779 Jy ! Component: 800 - total flux cleaned = -5.02305e-05 Jy ! Component: 850 - total flux cleaned = -3.32464e-05 Jy ! Component: 900 - total flux cleaned = 4.87318e-07 Jy ! Component: 950 - total flux cleaned = 3.35829e-05 Jy ! Component: 1000 - total flux cleaned = 3.34325e-05 Jy ! Component: 1050 - total flux cleaned = 3.33938e-05 Jy ! Component: 1100 - total flux cleaned = 8.03882e-05 Jy ! Component: 1150 - total flux cleaned = 0.000111316 Jy ! Component: 1200 - total flux cleaned = 8.08779e-05 Jy ! Component: 1250 - total flux cleaned = 0.00011127 Jy ! Component: 1300 - total flux cleaned = 0.000111479 Jy ! Component: 1350 - total flux cleaned = 0.000111384 Jy ! Component: 1400 - total flux cleaned = 9.6959e-05 Jy ! Component: 1450 - total flux cleaned = 0.000111177 Jy ! Component: 1500 - total flux cleaned = 0.000139194 Jy ! Component: 1550 - total flux cleaned = 0.000166975 Jy ! Component: 1600 - total flux cleaned = 0.000207465 Jy ! Component: 1650 - total flux cleaned = 0.000167031 Jy ! Component: 1700 - total flux cleaned = 0.000154104 Jy ! Component: 1750 - total flux cleaned = 0.00016724 Jy ! Component: 1800 - total flux cleaned = 0.000218585 Jy ! Component: 1850 - total flux cleaned = 0.000243859 Jy ! Component: 1900 - total flux cleaned = 0.000243727 Jy ! Component: 1950 - total flux cleaned = 0.000231378 Jy ! Component: 2000 - total flux cleaned = 0.00024361 Jy ! Component: 2050 - total flux cleaned = 0.000267746 Jy ! Component: 2100 - total flux cleaned = 0.000208069 Jy ! Component: 2150 - total flux cleaned = 0.000243519 Jy ! Component: 2200 - total flux cleaned = 0.000243452 Jy ! Component: 2250 - total flux cleaned = 0.000243443 Jy ! Component: 2300 - total flux cleaned = 0.000243511 Jy ! Component: 2350 - total flux cleaned = 0.00026616 Jy ! Component: 2400 - total flux cleaned = 0.0002438 Jy ! Component: 2450 - total flux cleaned = 0.00023293 Jy ! Component: 2500 - total flux cleaned = 0.000243846 Jy ! Component: 2550 - total flux cleaned = 0.000222187 Jy ! Component: 2600 - total flux cleaned = 0.000211248 Jy ! Component: 2650 - total flux cleaned = 0.000232323 Jy ! Component: 2700 - total flux cleaned = 0.000169115 Jy ! Component: 2750 - total flux cleaned = 0.000169092 Jy ! Component: 2800 - total flux cleaned = 0.000158658 Jy ! Component: 2850 - total flux cleaned = 0.000168997 Jy ! Component: 2900 - total flux cleaned = 0.000118293 Jy ! Component: 2950 - total flux cleaned = 0.000128444 Jy ! Component: 3000 - total flux cleaned = 0.000118449 Jy ! Component: 3050 - total flux cleaned = 9.8634e-05 Jy ! Component: 3100 - total flux cleaned = 6.92375e-05 Jy ! Component: 3150 - total flux cleaned = 7.8932e-05 Jy ! Component: 3200 - total flux cleaned = 7.88643e-05 Jy ! Component: 3250 - total flux cleaned = 5.0189e-05 Jy ! Component: 3300 - total flux cleaned = 5.02153e-05 Jy ! Component: 3350 - total flux cleaned = 4.07946e-05 Jy ! Component: 3400 - total flux cleaned = 4.07524e-05 Jy ! Component: 3450 - total flux cleaned = 2.22078e-05 Jy ! Component: 3500 - total flux cleaned = -5.36386e-06 Jy ! Component: 3550 - total flux cleaned = 3.78957e-06 Jy ! Component: 3600 - total flux cleaned = -1.43697e-05 Jy ! Component: 3650 - total flux cleaned = -3.24513e-05 Jy ! Component: 3700 - total flux cleaned = -5.02424e-05 Jy ! Component: 3750 - total flux cleaned = -5.90906e-05 Jy ! Component: 3800 - total flux cleaned = -3.2717e-05 Jy ! Component: 3850 - total flux cleaned = -9.40212e-05 Jy ! Component: 3900 - total flux cleaned = -0.00011135 Jy ! Component: 3950 - total flux cleaned = -0.000128509 Jy ! Component: 4000 - total flux cleaned = -0.000154105 Jy ! Component: 4050 - total flux cleaned = -0.000188053 Jy ! Total flux subtracted in 4096 components = -0.000179554 Jy ! Clean residual min=-0.000507 max=0.000457 Jy/beam ! Clean residual mean=-0.000002 rms=0.000157 Jy/beam ! Combined flux in latest and established models = 0.150171 Jy keep ! Adding 267 model components to the UV plane model. ! The established model now contains 313 components and 0.150171 Jy ![Exited script file: muppet] wmap "J1322+3912_S_2014_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.604 x 8.251 at 24.17 degrees (North through East) ! Clean map min=-0.001326 max=0.14532 Jy/beam ! Writing clean map to FITS file: J1322+3912_S_2014_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.14532 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000154449 device "J1322+3912_S_2014_08_05_pus\_map.eps/VPS" ! Attempting to open device: 'J1322+3912_S_2014_08_05_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.318845 0.318845 0.63769 1.27538 2.55076 5.10152 10.203 20.4061 40.8121 81.6243 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.145 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.604 x 8.251 at 24.17 degrees (North through East) ! Clean map min=-0.001326 max=0.14532 Jy/beam quit ! Quitting program ! Log file J1322+3912_S_2014_08_05_pus_uvs.log closed on Sun Nov 13 17:28:39 2016