! Started logfile: J1322+2645_S_2014_06_09_pus_uvs.log on Wed Nov 16 19:54:38 2016 obs J1322+2645_S_2014_06_09_pus_uva.fits ! Reading UV FITS file: J1322+2645_S_2014_06_09_pus_uva.fits ! AN table 1: 122 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.791803 visibilities/baseline/integration-bin. ! Found source: J1322+2645 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 336 lines of history. ! ! Reading 17388 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1322+2645_S_2014_06_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 128 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 128 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 128 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 128 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.954733Jy sigma=0.011339 ! Fit after self-cal, rms=0.924990Jy sigma=0.011007 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.01 mas, bmaj=5.309 mas, bpa=-4.989 degrees ! Estimated noise=743.114 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0488129 Jy ! Component: 100 - total flux cleaned = 0.0741389 Jy ! Total flux subtracted in 100 components = 0.0741389 Jy ! Clean residual min=-0.010696 max=0.017061 Jy/beam ! Clean residual mean=-0.000033 rms=0.003770 Jy/beam ! Combined flux in latest and established models = 0.0741389 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 43 components and 0.0741389 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121233Jy sigma=0.001522 ! Fit after self-cal, rms=0.120950Jy sigma=0.001518 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.722 mas, bmaj=6.699 mas, bpa=-8.6 degrees ! Estimated noise=454.15 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0423124 Jy ! Component: 100 - total flux cleaned = 0.067752 Jy ! Component: 150 - total flux cleaned = 0.0833834 Jy ! Component: 200 - total flux cleaned = 0.0929869 Jy ! Total flux subtracted in 200 components = 0.0929869 Jy ! Clean residual min=-0.016138 max=0.034157 Jy/beam ! Clean residual mean=-0.000003 rms=0.006840 Jy/beam ! Combined flux in latest and established models = 0.167126 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 66 components and 0.167126 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106726Jy sigma=0.001301 ! Fit after self-cal, rms=0.106036Jy sigma=0.001294 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.48 HN 1.18 KP 0.74 ! LA 0.83 MK 2.15 NL 1.36 OV 2.56 ! PT 0.63 SC 1.50 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.78 HN 1.22 KP 0.72 ! LA 0.80 MK 2.22 NL 1.38 OV 2.59 ! PT 0.62 SC 1.57 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 2.16 HN 1.18 KP 0.65 ! LA 0.63 MK 2.14 NL 1.39 OV 2.57 ! PT 0.62 SC 1.44 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 2.10 HN 1.07 KP 0.66 ! LA 0.61 MK 2.03 NL 1.55 OV 2.53 ! PT 0.66 SC 1.38 ! ! ! Fit before self-cal, rms=0.106036Jy sigma=0.001294 ! Fit after self-cal, rms=0.190250Jy sigma=0.000932 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.474 mas, bmaj=7.745 mas, bpa=-6.924 degrees ! Estimated noise=554.885 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00339163 Jy ! Component: 100 - total flux cleaned = 0.0039396 Jy ! Component: 150 - total flux cleaned = 0.0041602 Jy ! Component: 200 - total flux cleaned = 0.00433206 Jy ! Total flux subtracted in 200 components = 0.00433206 Jy ! Clean residual min=-0.013656 max=0.013599 Jy/beam ! Clean residual mean=-0.000005 rms=0.003902 Jy/beam ! Combined flux in latest and established models = 0.171458 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 68 components and 0.171458 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.189779Jy sigma=0.000930 ! Fit after self-cal, rms=0.194200Jy sigma=0.000919 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.194200Jy sigma=0.000919 ! Fit after self-cal, rms=0.218106Jy sigma=0.000854 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.181 mas, bmaj=7.846 mas, bpa=-16.38 degrees ! Estimated noise=541.769 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00134556 Jy ! Component: 100 - total flux cleaned = 0.00188584 Jy ! Component: 150 - total flux cleaned = 0.00227997 Jy ! Component: 200 - total flux cleaned = 0.00234474 Jy ! Total flux subtracted in 200 components = 0.00234474 Jy ! Clean residual min=-0.008191 max=0.009735 Jy/beam ! Clean residual mean=-0.000005 rms=0.002606 Jy/beam ! Combined flux in latest and established models = 0.173803 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 74 components and 0.173803 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.217746Jy sigma=0.000853 ! Fit after self-cal, rms=0.218071Jy sigma=0.000852 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.38087e-05 Jy ! Component: 100 - total flux cleaned = 0.000268673 Jy ! Component: 150 - total flux cleaned = 0.000326933 Jy ! Component: 200 - total flux cleaned = 0.000420297 Jy ! Total flux subtracted in 200 components = 0.000420297 Jy ! Clean residual min=-0.007997 max=0.009477 Jy/beam ! Clean residual mean=-0.000005 rms=0.002592 Jy/beam ! Combined flux in latest and established models = 0.174223 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 76 components and 0.174223 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.217845Jy sigma=0.000852 ! Fit after self-cal, rms=0.217952Jy sigma=0.000851 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.217952Jy sigma=0.000851 ! Fit after self-cal, rms=0.234385Jy sigma=0.000850 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.106 mas, bmaj=8.107 mas, bpa=-19.66 degrees ! Estimated noise=537.569 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000570948 Jy ! Component: 100 - total flux cleaned = 0.000987097 Jy ! Component: 150 - total flux cleaned = 0.00128635 Jy ! Component: 200 - total flux cleaned = 0.00133527 Jy ! Total flux subtracted in 200 components = 0.00133527 Jy ! Clean residual min=-0.007850 max=0.009345 Jy/beam ! Clean residual mean=-0.000007 rms=0.002537 Jy/beam ! Combined flux in latest and established models = 0.175558 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 78 components and 0.175558 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.234130Jy sigma=0.000850 ! Fit after self-cal, rms=0.234280Jy sigma=0.000849 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.50771e-05 Jy ! Component: 100 - total flux cleaned = 0.000126459 Jy ! Component: 150 - total flux cleaned = 0.000252551 Jy ! Component: 200 - total flux cleaned = 0.000286424 Jy ! Total flux subtracted in 200 components = 0.000286424 Jy ! Clean residual min=-0.007729 max=0.009416 Jy/beam ! Clean residual mean=-0.000007 rms=0.002539 Jy/beam ! Combined flux in latest and established models = 0.175845 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 79 components and 0.175845 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.234125Jy sigma=0.000850 ! Fit after self-cal, rms=0.234226Jy sigma=0.000850 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.234226Jy sigma=0.000850 ! Fit after self-cal, rms=0.249685Jy sigma=0.000849 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.814 mas, bmaj=13.29 mas, bpa=-26.59 degrees ! Estimated noise=549.238 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000495911 Jy ! Component: 100 - total flux cleaned = 0.000631282 Jy ! Component: 150 - total flux cleaned = 0.000745854 Jy ! Component: 200 - total flux cleaned = 0.000843405 Jy ! Total flux subtracted in 200 components = 0.000843405 Jy ! Clean residual min=-0.010297 max=0.012857 Jy/beam ! Clean residual mean=-0.000013 rms=0.003610 Jy/beam ! Combined flux in latest and established models = 0.176688 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 81 components and 0.176688 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.249540Jy sigma=0.000850 ! Fit after self-cal, rms=0.249713Jy sigma=0.000850 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000167489 Jy ! Component: 100 - total flux cleaned = -4.63871e-05 Jy ! Component: 150 - total flux cleaned = 5.90789e-06 Jy ! Component: 200 - total flux cleaned = 9.39613e-05 Jy ! Total flux subtracted in 200 components = 9.39613e-05 Jy ! Clean residual min=-0.010268 max=0.012951 Jy/beam ! Clean residual mean=-0.000013 rms=0.003614 Jy/beam ! Combined flux in latest and established models = 0.176782 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 83 components and 0.176782 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.249610Jy sigma=0.000851 ! Fit after self-cal, rms=0.249745Jy sigma=0.000850 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.106 mas, bmaj=8.299 mas, bpa=-21.01 degrees ! Estimated noise=542.47 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.106 x 8.299 at -21.01 degrees (North through East) ! Clean map min=-0.0077002 max=0.07406 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.219 mas, bmaj=6.412 mas, bpa=-19.91 degrees ! Estimated noise=1008.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0626432 Jy ! Component: 100 - total flux cleaned = 0.0966112 Jy ! Component: 150 - total flux cleaned = 0.119077 Jy ! Component: 200 - total flux cleaned = 0.134449 Jy ! Total flux subtracted in 200 components = 0.134449 Jy ! Clean residual min=-0.009413 max=0.012129 Jy/beam ! Clean residual mean=-0.000019 rms=0.002702 Jy/beam ! Combined flux in latest and established models = 0.134449 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 38 model components to the UV plane model. ! The established model now contains 38 components and 0.134449 Jy ! Inverting map and beam ! Estimated beam: bmin=4.106 mas, bmaj=8.299 mas, bpa=-21.01 degrees ! Estimated noise=542.47 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4.5, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0196996 Jy ! Component: 100 - total flux cleaned = 0.0307227 Jy ! Component: 150 - total flux cleaned = 0.037125 Jy ! Component: 200 - total flux cleaned = 0.0380305 Jy ! Total flux subtracted in 200 components = 0.0380305 Jy ! Clean residual min=-0.008451 max=0.011012 Jy/beam ! Clean residual mean=-0.000013 rms=0.002578 Jy/beam ! Combined flux in latest and established models = 0.17248 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 86 components and 0.17248 Jy ! Inverting map ! Added new window around map position (-14.5, 6.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00727451 Jy ! Component: 100 - total flux cleaned = 0.00842114 Jy ! Component: 150 - total flux cleaned = 0.00819739 Jy ! Component: 200 - total flux cleaned = 0.00838536 Jy ! Total flux subtracted in 200 components = 0.00838536 Jy ! Clean residual min=-0.008020 max=0.008648 Jy/beam ! Clean residual mean=-0.000001 rms=0.002383 Jy/beam ! Combined flux in latest and established models = 0.180865 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 122 components and 0.180865 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.814 mas, bmaj=13.29 mas, bpa=-26.59 degrees ! Estimated noise=549.238 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000739705 Jy ! Component: 100 - total flux cleaned = -0.000522557 Jy ! Component: 150 - total flux cleaned = -0.000526083 Jy ! Component: 200 - total flux cleaned = -0.000329615 Jy ! Total flux subtracted in 200 components = -0.000329615 Jy ! Clean residual min=-0.010510 max=0.011411 Jy/beam ! Clean residual mean=0.000008 rms=0.003254 Jy/beam ! Combined flux in latest and established models = 0.180535 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.27332e-07 Jy ! Component: 100 - total flux cleaned = 1.81299e-06 Jy ! Component: 150 - total flux cleaned = -1.09612e-07 Jy ! Component: 200 - total flux cleaned = -8.21686e-06 Jy ! Total flux subtracted in 200 components = -8.21686e-06 Jy ! Clean residual min=-0.010477 max=0.011335 Jy/beam ! Clean residual mean=0.000011 rms=0.003199 Jy/beam ! Combined flux in latest and established models = 0.180527 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 159 components and 0.180527 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.106 mas, bmaj=8.299 mas, bpa=-21.01 degrees ! Estimated noise=542.47 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000998298 Jy ! Component: 100 - total flux cleaned = 0.000997851 Jy ! Component: 150 - total flux cleaned = 0.000852966 Jy ! Component: 200 - total flux cleaned = 0.000850634 Jy ! Total flux subtracted in 200 components = 0.000850634 Jy ! Clean residual min=-0.008175 max=0.008170 Jy/beam ! Clean residual mean=0.000008 rms=0.002257 Jy/beam ! Combined flux in latest and established models = 0.181378 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 181 components and 0.181378 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.245871Jy sigma=0.000836 ! Fit after self-cal, rms=0.244137Jy sigma=0.000832 wmodel J1322+2645_S_2014_06_09_pus_map.mod ! Writing 181 model components to file: J1322+2645_S_2014_06_09_pus_map.mod wobs J1322+2645_S_2014_06_09_pus_uvs.fits ! Writing UV FITS file: J1322+2645_S_2014_06_09_pus_uvs.fits wwins J1322+2645_S_2014_06_09_pus_map.win ! wwins: Wrote 3 windows to J1322+2645_S_2014_06_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00183405 Jy ! Component: 100 - total flux cleaned = 0.00264404 Jy ! Component: 150 - total flux cleaned = 0.00379623 Jy ! Component: 200 - total flux cleaned = 0.00428556 Jy ! Component: 250 - total flux cleaned = 0.0044027 Jy ! Component: 300 - total flux cleaned = 0.00451624 Jy ! Component: 350 - total flux cleaned = 0.00440314 Jy ! Component: 400 - total flux cleaned = 0.00451257 Jy ! Component: 450 - total flux cleaned = 0.00408162 Jy ! Component: 500 - total flux cleaned = 0.00429415 Jy ! Component: 550 - total flux cleaned = 0.00439646 Jy ! Component: 600 - total flux cleaned = 0.00419157 Jy ! Component: 650 - total flux cleaned = 0.00429173 Jy ! Component: 700 - total flux cleaned = 0.00419295 Jy ! Component: 750 - total flux cleaned = 0.00419416 Jy ! Component: 800 - total flux cleaned = 0.00438706 Jy ! Component: 850 - total flux cleaned = 0.00429093 Jy ! Component: 900 - total flux cleaned = 0.00410329 Jy ! Component: 950 - total flux cleaned = 0.00382765 Jy ! Component: 1000 - total flux cleaned = 0.0039192 Jy ! Component: 1050 - total flux cleaned = 0.00356106 Jy ! Component: 1100 - total flux cleaned = 0.00356101 Jy ! Component: 1150 - total flux cleaned = 0.00356075 Jy ! Component: 1200 - total flux cleaned = 0.00356029 Jy ! Component: 1250 - total flux cleaned = 0.00338893 Jy ! Component: 1300 - total flux cleaned = 0.00338805 Jy ! Component: 1350 - total flux cleaned = 0.00305354 Jy ! Component: 1400 - total flux cleaned = 0.00288871 Jy ! Component: 1450 - total flux cleaned = 0.00280687 Jy ! Component: 1500 - total flux cleaned = 0.00256376 Jy ! Component: 1550 - total flux cleaned = 0.00240385 Jy ! Component: 1600 - total flux cleaned = 0.00216732 Jy ! Component: 1650 - total flux cleaned = 0.00193387 Jy ! Component: 1700 - total flux cleaned = 0.00208926 Jy ! Component: 1750 - total flux cleaned = 0.00185929 Jy ! Component: 1800 - total flux cleaned = 0.00163166 Jy ! Component: 1850 - total flux cleaned = 0.00125647 Jy ! Component: 1900 - total flux cleaned = 0.00140485 Jy ! Component: 1950 - total flux cleaned = 0.00147812 Jy ! Component: 2000 - total flux cleaned = 0.00133086 Jy ! Component: 2050 - total flux cleaned = 0.000969372 Jy ! Component: 2100 - total flux cleaned = 0.000827128 Jy ! Component: 2150 - total flux cleaned = 0.000685634 Jy ! Component: 2200 - total flux cleaned = 0.000755367 Jy ! Component: 2250 - total flux cleaned = 0.000684573 Jy ! Component: 2300 - total flux cleaned = 0.000477489 Jy ! Component: 2350 - total flux cleaned = 0.000135076 Jy ! Component: 2400 - total flux cleaned = 6.77662e-05 Jy ! Component: 2450 - total flux cleaned = -0.000134196 Jy ! Component: 2500 - total flux cleaned = -0.000334275 Jy ! Component: 2550 - total flux cleaned = -0.000532191 Jy ! Component: 2600 - total flux cleaned = -0.000795072 Jy ! Component: 2650 - total flux cleaned = -0.000925771 Jy ! Component: 2700 - total flux cleaned = -0.00124847 Jy ! Component: 2750 - total flux cleaned = -0.00137701 Jy ! Component: 2800 - total flux cleaned = -0.00169543 Jy ! Component: 2850 - total flux cleaned = -0.00194704 Jy ! Component: 2900 - total flux cleaned = -0.00213443 Jy ! Component: 2950 - total flux cleaned = -0.00232063 Jy ! Component: 3000 - total flux cleaned = -0.0026889 Jy ! Component: 3050 - total flux cleaned = -0.00281099 Jy ! Component: 3100 - total flux cleaned = -0.00323485 Jy ! Component: 3150 - total flux cleaned = -0.00341495 Jy ! Component: 3200 - total flux cleaned = -0.00377254 Jy ! Component: 3250 - total flux cleaned = -0.00389091 Jy ! Component: 3300 - total flux cleaned = -0.00400868 Jy ! Component: 3350 - total flux cleaned = -0.00435844 Jy ! Component: 3400 - total flux cleaned = -0.00459001 Jy ! Component: 3450 - total flux cleaned = -0.00476277 Jy ! Component: 3500 - total flux cleaned = -0.00487693 Jy ! Component: 3550 - total flux cleaned = -0.0051039 Jy ! Component: 3600 - total flux cleaned = -0.00521626 Jy ! Component: 3650 - total flux cleaned = -0.00544022 Jy ! Component: 3700 - total flux cleaned = -0.00571757 Jy ! Component: 3750 - total flux cleaned = -0.00593792 Jy ! Component: 3800 - total flux cleaned = -0.00599272 Jy ! Component: 3850 - total flux cleaned = -0.00621025 Jy ! Component: 3900 - total flux cleaned = -0.00642602 Jy ! Component: 3950 - total flux cleaned = -0.00637232 Jy ! Component: 4000 - total flux cleaned = -0.00674475 Jy ! Component: 4050 - total flux cleaned = -0.00669189 Jy ! Total flux subtracted in 4096 components = -0.00711224 Jy ! Clean residual min=-0.002959 max=0.002879 Jy/beam ! Clean residual mean=-0.000001 rms=0.001079 Jy/beam ! Combined flux in latest and established models = 0.174266 Jy keep ! Adding 385 model components to the UV plane model. ! The established model now contains 566 components and 0.174266 Jy ![Exited script file: muppet] wmap "J1322+2645_S_2014_06_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.106 x 8.299 at -21.01 degrees (North through East) ! Clean map min=-0.014699 max=0.073587 Jy/beam ! Writing clean map to FITS file: J1322+2645_S_2014_06_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0735869 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00107774 device "J1322+2645_S_2014_06_09_pus\_map.eps/VPS" ! Attempting to open device: 'J1322+2645_S_2014_06_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -4.39374 4.39374 8.78747 17.5749 35.1499 70.2998 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0032 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.073 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.106 x 8.299 at -21.01 degrees (North through East) ! Clean map min=-0.014699 max=0.073587 Jy/beam quit ! Quitting program ! Log file J1322+2645_S_2014_06_09_pus_uvs.log closed on Wed Nov 16 19:54:44 2016