! Started logfile: J1318-0607_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:28:09 2017 obs J1318-0607_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J1318-0607_S_2014_01_04_pus_uva.fits ! AN table 1: 97 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.681558 visibilities/baseline/integration-bin. ! Found source: J1318-0607 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 9520 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1318-0607_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 145 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 145 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 145 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 145 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.895837Jy sigma=0.010296 ! Fit after self-cal, rms=0.868080Jy sigma=0.009993 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.75 mas, bmaj=5.818 mas, bpa=1.127 degrees ! Estimated noise=1006.53 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.112197 Jy ! Component: 100 - total flux cleaned = 0.136668 Jy ! Total flux subtracted in 100 components = 0.136668 Jy ! Clean residual min=-0.006432 max=0.009678 Jy/beam ! Clean residual mean=0.000008 rms=0.001877 Jy/beam ! Combined flux in latest and established models = 0.136668 Jy ! Performing phase self-cal ! Adding 2 model components to the UV plane model. ! The established model now contains 2 components and 0.136668 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.208531Jy sigma=0.000969 ! Fit after self-cal, rms=0.208383Jy sigma=0.000969 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.249 mas, bmaj=6.677 mas, bpa=-0.1183 degrees ! Estimated noise=693.519 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00661837 Jy ! Component: 100 - total flux cleaned = 0.00909599 Jy ! Component: 150 - total flux cleaned = 0.00975563 Jy ! Component: 200 - total flux cleaned = 0.010042 Jy ! Total flux subtracted in 200 components = 0.010042 Jy ! Clean residual min=-0.005713 max=0.007844 Jy/beam ! Clean residual mean=0.000013 rms=0.001674 Jy/beam ! Combined flux in latest and established models = 0.14671 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 16 components and 0.14671 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.207685Jy sigma=0.000970 ! Fit after self-cal, rms=0.207652Jy sigma=0.000970 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 0.83 KP 1.00* LA 1.05 ! MK 1.00 NL 0.99 OV 0.99 PT 1.05 ! SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.36 FD 1.02 KP 1.00* LA 1.03 ! MK 0.95 NL 1.05 OV 1.00 PT 0.99 ! SC 0.96 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.04 KP 1.00* LA 0.82 ! MK 1.00 NL 1.00 OV 0.82 PT 0.98 ! SC 0.94 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.99 KP 1.00* LA 0.82 ! MK 1.02 NL 1.11 OV 0.99 PT 0.99 ! SC 0.92 ! ! ! Fit before self-cal, rms=0.207652Jy sigma=0.000970 ! Fit after self-cal, rms=0.194330Jy sigma=0.000937 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.199 mas, bmaj=6.729 mas, bpa=0.1826 degrees ! Estimated noise=704.04 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00243813 Jy ! Component: 100 - total flux cleaned = 0.00346458 Jy ! Component: 150 - total flux cleaned = 0.00365749 Jy ! Component: 200 - total flux cleaned = 0.00374847 Jy ! Total flux subtracted in 200 components = 0.00374847 Jy ! Clean residual min=-0.003846 max=0.004195 Jy/beam ! Clean residual mean=0.000000 rms=0.001039 Jy/beam ! Combined flux in latest and established models = 0.150458 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 32 components and 0.150458 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.194164Jy sigma=0.000937 ! Fit after self-cal, rms=0.193877Jy sigma=0.000936 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.193877Jy sigma=0.000936 ! Fit after self-cal, rms=0.120428Jy sigma=0.000927 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.196 mas, bmaj=6.727 mas, bpa=0.249 degrees ! Estimated noise=706.962 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000898114 Jy ! Component: 100 - total flux cleaned = 0.00119626 Jy ! Component: 150 - total flux cleaned = 0.00126603 Jy ! Component: 200 - total flux cleaned = 0.00131326 Jy ! Total flux subtracted in 200 components = 0.00131326 Jy ! Clean residual min=-0.002572 max=0.002814 Jy/beam ! Clean residual mean=0.000001 rms=0.000625 Jy/beam ! Combined flux in latest and established models = 0.151771 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 48 components and 0.151772 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120408Jy sigma=0.000927 ! Fit after self-cal, rms=0.120507Jy sigma=0.000926 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (120, -26.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00246169 Jy ! Component: 100 - total flux cleaned = 0.00241767 Jy ! Component: 150 - total flux cleaned = 0.00233533 Jy ! Component: 200 - total flux cleaned = 0.00222368 Jy ! Total flux subtracted in 200 components = 0.00222368 Jy ! Clean residual min=-0.002451 max=0.002821 Jy/beam ! Clean residual mean=0.000004 rms=0.000614 Jy/beam ! Combined flux in latest and established models = 0.153995 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 67 components and 0.153995 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120392Jy sigma=0.000926 ! Fit after self-cal, rms=0.120405Jy sigma=0.000925 ! Inverting map ! Added new window around map position (-42, -109.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00185689 Jy ! Component: 100 - total flux cleaned = 0.00213304 Jy ! Component: 150 - total flux cleaned = 0.00239941 Jy ! Component: 200 - total flux cleaned = 0.00259793 Jy ! Total flux subtracted in 200 components = 0.00259793 Jy ! Clean residual min=-0.002441 max=0.002293 Jy/beam ! Clean residual mean=0.000003 rms=0.000590 Jy/beam ! Combined flux in latest and established models = 0.156593 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 84 components and 0.156593 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120295Jy sigma=0.000925 ! Fit after self-cal, rms=0.120295Jy sigma=0.000925 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120295Jy sigma=0.000925 ! Fit after self-cal, rms=0.118035Jy sigma=0.000924 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.196 mas, bmaj=6.72 mas, bpa=0.3799 degrees ! Estimated noise=710.027 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00113881 Jy ! Component: 100 - total flux cleaned = 0.00141608 Jy ! Component: 150 - total flux cleaned = 0.00141673 Jy ! Component: 200 - total flux cleaned = 0.00130874 Jy ! Total flux subtracted in 200 components = 0.00130874 Jy ! Clean residual min=-0.002244 max=0.002590 Jy/beam ! Clean residual mean=0.000002 rms=0.000582 Jy/beam ! Combined flux in latest and established models = 0.157902 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 94 components and 0.157902 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117964Jy sigma=0.000924 ! Fit after self-cal, rms=0.118194Jy sigma=0.000924 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (101.5, 109). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000834713 Jy ! Component: 100 - total flux cleaned = 0.000910267 Jy ! Component: 150 - total flux cleaned = 0.0011628 Jy ! Component: 200 - total flux cleaned = 0.00127695 Jy ! Total flux subtracted in 200 components = 0.00127695 Jy ! Clean residual min=-0.002265 max=0.002341 Jy/beam ! Clean residual mean=0.000002 rms=0.000559 Jy/beam ! Combined flux in latest and established models = 0.159179 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 114 components and 0.159179 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118095Jy sigma=0.000924 ! Fit after self-cal, rms=0.118093Jy sigma=0.000923 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118093Jy sigma=0.000923 ! Fit after self-cal, rms=0.118065Jy sigma=0.000923 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.901 mas, bmaj=12.39 mas, bpa=9.044 degrees ! Estimated noise=904.981 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000585202 Jy ! Component: 100 - total flux cleaned = 0.000907656 Jy ! Component: 150 - total flux cleaned = 0.00115466 Jy ! Component: 200 - total flux cleaned = 0.00126748 Jy ! Total flux subtracted in 200 components = 0.00126748 Jy ! Clean residual min=-0.002381 max=0.002357 Jy/beam ! Clean residual mean=0.000004 rms=0.000722 Jy/beam ! Combined flux in latest and established models = 0.160446 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 137 components and 0.160446 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118024Jy sigma=0.000923 ! Fit after self-cal, rms=0.118190Jy sigma=0.000923 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000119979 Jy ! Component: 100 - total flux cleaned = 0.000195184 Jy ! Component: 150 - total flux cleaned = 0.000329941 Jy ! Component: 200 - total flux cleaned = 0.000362186 Jy ! Total flux subtracted in 200 components = 0.000362186 Jy ! Clean residual min=-0.002341 max=0.002291 Jy/beam ! Clean residual mean=0.000003 rms=0.000713 Jy/beam ! Combined flux in latest and established models = 0.160808 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 155 components and 0.160808 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118169Jy sigma=0.000923 ! Fit after self-cal, rms=0.118178Jy sigma=0.000923 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.196 mas, bmaj=6.713 mas, bpa=0.3857 degrees ! Estimated noise=712.256 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.196 x 6.713 at 0.3857 degrees (North through East) ! Clean map min=-0.0023371 max=0.14622 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.708 mas, bmaj=5.85 mas, bpa=1.627 degrees ! Estimated noise=1028.89 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.114458 Jy ! Component: 100 - total flux cleaned = 0.139441 Jy ! Component: 150 - total flux cleaned = 0.146912 Jy ! Component: 200 - total flux cleaned = 0.151748 Jy ! Total flux subtracted in 200 components = 0.151748 Jy ! Clean residual min=-0.004218 max=0.004373 Jy/beam ! Clean residual mean=0.000004 rms=0.001162 Jy/beam ! Combined flux in latest and established models = 0.151748 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.151748 Jy ! Inverting map and beam ! Estimated beam: bmin=3.196 mas, bmaj=6.713 mas, bpa=0.3857 degrees ! Estimated noise=712.256 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00466589 Jy ! Component: 100 - total flux cleaned = 0.00671605 Jy ! Component: 150 - total flux cleaned = 0.0077544 Jy ! Component: 200 - total flux cleaned = 0.00857703 Jy ! Total flux subtracted in 200 components = 0.00857703 Jy ! Clean residual min=-0.002622 max=0.003109 Jy/beam ! Clean residual mean=0.000003 rms=0.000660 Jy/beam ! Combined flux in latest and established models = 0.160325 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 43 components and 0.160325 Jy ! Inverting map ! Added new window around map position (122, 9). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00219209 Jy ! Component: 100 - total flux cleaned = 0.00289225 Jy ! Component: 150 - total flux cleaned = 0.00344809 Jy ! Component: 200 - total flux cleaned = 0.00384275 Jy ! Total flux subtracted in 200 components = 0.00384275 Jy ! Clean residual min=-0.002255 max=0.002411 Jy/beam ! Clean residual mean=0.000002 rms=0.000590 Jy/beam ! Combined flux in latest and established models = 0.164168 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 55 components and 0.164168 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.901 mas, bmaj=12.39 mas, bpa=9.044 degrees ! Estimated noise=904.981 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.19406e-06 Jy ! Component: 100 - total flux cleaned = -0.000494226 Jy ! Component: 150 - total flux cleaned = -0.00068823 Jy ! Component: 200 - total flux cleaned = -0.000734117 Jy ! Total flux subtracted in 200 components = -0.000734117 Jy ! Clean residual min=-0.002783 max=0.002436 Jy/beam ! Clean residual mean=0.000001 rms=0.000742 Jy/beam ! Combined flux in latest and established models = 0.163434 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.06973e-05 Jy ! Component: 100 - total flux cleaned = 3.32743e-05 Jy ! Component: 150 - total flux cleaned = 0.000170702 Jy ! Component: 200 - total flux cleaned = 0.000267012 Jy ! Total flux subtracted in 200 components = 0.000267012 Jy ! Clean residual min=-0.002598 max=0.002450 Jy/beam ! Clean residual mean=0.000001 rms=0.000717 Jy/beam ! Combined flux in latest and established models = 0.163701 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 95 components and 0.163701 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.196 mas, bmaj=6.713 mas, bpa=0.3857 degrees ! Estimated noise=712.256 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000631391 Jy ! Component: 100 - total flux cleaned = 0.000673958 Jy ! Component: 150 - total flux cleaned = 0.000758374 Jy ! Component: 200 - total flux cleaned = 0.000837531 Jy ! Total flux subtracted in 200 components = 0.000837531 Jy ! Clean residual min=-0.002406 max=0.002360 Jy/beam ! Clean residual mean=0.000001 rms=0.000546 Jy/beam ! Combined flux in latest and established models = 0.164538 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 115 components and 0.164538 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118085Jy sigma=0.000923 ! Fit after self-cal, rms=0.118115Jy sigma=0.000923 wmodel J1318-0607_S_2014_01_04_pus_map.mod ! Writing 115 model components to file: J1318-0607_S_2014_01_04_pus_map.mod wobs J1318-0607_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J1318-0607_S_2014_01_04_pus_uvs.fits wwins J1318-0607_S_2014_01_04_pus_map.win ! wwins: Wrote 5 windows to J1318-0607_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000249493 Jy ! Component: 100 - total flux cleaned = 0.00076683 Jy ! Component: 150 - total flux cleaned = 0.0012874 Jy ! Component: 200 - total flux cleaned = 0.00185343 Jy ! Component: 250 - total flux cleaned = 0.00236275 Jy ! Component: 300 - total flux cleaned = 0.00285434 Jy ! Component: 350 - total flux cleaned = 0.00320385 Jy ! Component: 400 - total flux cleaned = 0.00354389 Jy ! Component: 450 - total flux cleaned = 0.00390424 Jy ! Component: 500 - total flux cleaned = 0.00422595 Jy ! Component: 550 - total flux cleaned = 0.00456896 Jy ! Component: 600 - total flux cleaned = 0.00487653 Jy ! Component: 650 - total flux cleaned = 0.00514992 Jy ! Component: 700 - total flux cleaned = 0.00547182 Jy ! Component: 750 - total flux cleaned = 0.00581409 Jy ! Component: 800 - total flux cleaned = 0.00620089 Jy ! Component: 850 - total flux cleaned = 0.00655529 Jy ! Component: 900 - total flux cleaned = 0.00682908 Jy ! Component: 950 - total flux cleaned = 0.00707413 Jy ! Component: 1000 - total flux cleaned = 0.00741157 Jy ! Component: 1050 - total flux cleaned = 0.00774364 Jy ! Component: 1100 - total flux cleaned = 0.00802456 Jy ! Component: 1150 - total flux cleaned = 0.00825578 Jy ! Component: 1200 - total flux cleaned = 0.00857486 Jy ! Component: 1250 - total flux cleaned = 0.00884499 Jy ! Component: 1300 - total flux cleaned = 0.00911156 Jy ! Component: 1350 - total flux cleaned = 0.00935324 Jy ! Component: 1400 - total flux cleaned = 0.00954871 Jy ! Component: 1450 - total flux cleaned = 0.00982798 Jy ! Component: 1500 - total flux cleaned = 0.0100192 Jy ! Component: 1550 - total flux cleaned = 0.0102295 Jy ! Component: 1600 - total flux cleaned = 0.0104377 Jy ! Component: 1650 - total flux cleaned = 0.0106434 Jy ! Component: 1700 - total flux cleaned = 0.0108266 Jy ! Component: 1750 - total flux cleaned = 0.0109879 Jy ! Component: 1800 - total flux cleaned = 0.0111278 Jy ! Component: 1850 - total flux cleaned = 0.0113655 Jy ! Component: 1900 - total flux cleaned = 0.0114834 Jy ! Component: 1950 - total flux cleaned = 0.0117166 Jy ! Component: 2000 - total flux cleaned = 0.0118514 Jy ! Component: 2050 - total flux cleaned = 0.0120038 Jy ! Component: 2100 - total flux cleaned = 0.0121362 Jy ! Component: 2150 - total flux cleaned = 0.0123046 Jy ! Component: 2200 - total flux cleaned = 0.0123977 Jy ! Component: 2250 - total flux cleaned = 0.0125083 Jy ! Component: 2300 - total flux cleaned = 0.0126362 Jy ! Component: 2350 - total flux cleaned = 0.0127452 Jy ! Component: 2400 - total flux cleaned = 0.0128351 Jy ! Component: 2450 - total flux cleaned = 0.0129066 Jy ! Component: 2500 - total flux cleaned = 0.0130483 Jy ! Component: 2550 - total flux cleaned = 0.0131362 Jy ! Component: 2600 - total flux cleaned = 0.013241 Jy ! Component: 2650 - total flux cleaned = 0.0133967 Jy ! Component: 2700 - total flux cleaned = 0.0134483 Jy ! Component: 2750 - total flux cleaned = 0.0135508 Jy ! Component: 2800 - total flux cleaned = 0.0136358 Jy ! Component: 2850 - total flux cleaned = 0.0138214 Jy ! Component: 2900 - total flux cleaned = 0.0139386 Jy ! Component: 2950 - total flux cleaned = 0.0141052 Jy ! Component: 3000 - total flux cleaned = 0.0141549 Jy ! Component: 3050 - total flux cleaned = 0.0143196 Jy ! Component: 3100 - total flux cleaned = 0.0144505 Jy ! Component: 3150 - total flux cleaned = 0.014548 Jy ! Component: 3200 - total flux cleaned = 0.0146936 Jy ! Component: 3250 - total flux cleaned = 0.0147578 Jy ! Component: 3300 - total flux cleaned = 0.014854 Jy ! Component: 3350 - total flux cleaned = 0.014902 Jy ! Component: 3400 - total flux cleaned = 0.0150448 Jy ! Component: 3450 - total flux cleaned = 0.0151709 Jy ! Component: 3500 - total flux cleaned = 0.0152807 Jy ! Component: 3550 - total flux cleaned = 0.0153899 Jy ! Component: 3600 - total flux cleaned = 0.0154677 Jy ! Component: 3650 - total flux cleaned = 0.0155758 Jy ! Component: 3700 - total flux cleaned = 0.0156682 Jy ! Component: 3750 - total flux cleaned = 0.0157447 Jy ! Component: 3800 - total flux cleaned = 0.0158515 Jy ! Component: 3850 - total flux cleaned = 0.0159577 Jy ! Component: 3900 - total flux cleaned = 0.0159879 Jy ! Component: 3950 - total flux cleaned = 0.0160783 Jy ! Component: 4000 - total flux cleaned = 0.0161982 Jy ! Component: 4050 - total flux cleaned = 0.0162877 Jy ! Total flux subtracted in 4096 components = 0.0164214 Jy ! Clean residual min=-0.000923 max=0.000882 Jy/beam ! Clean residual mean=-0.000001 rms=0.000262 Jy/beam ! Combined flux in latest and established models = 0.18096 Jy keep ! Adding 238 model components to the UV plane model. ! The established model now contains 353 components and 0.18096 Jy ![Exited script file: muppet] wmap "J1318-0607_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.196 x 6.713 at 0.3857 degrees (North through East) ! Clean map min=-0.00232 max=0.14629 Jy/beam ! Writing clean map to FITS file: J1318-0607_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.146294 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00025329 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.519411 0.519411 1.03882 2.07764 4.15529 8.31058 16.6212 33.2423 66.4846 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.146 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.196 x 6.713 at 0.3857 degrees (North through East) ! Clean map min=-0.00232 max=0.14629 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1318-0607_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:28:14 2017