! Started logfile: J1316-3338_S_2015_01_23_pus_uvs.log on Mon Jan 2 19:25:48 2017 obs J1316-3338_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J1316-3338_S_2015_01_23_pus_uva.fits ! AN table 1: 70 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.405079 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1316-3338 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 5104 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1316-3338_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 353 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 349 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 366 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 352 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.669174Jy sigma=0.005058 ! Fit after self-cal, rms=0.659232Jy sigma=0.005009 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.448 mas, bmaj=6.193 mas, bpa=-4.232 degrees ! Estimated noise=1896.93 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.269694 Jy ! Component: 100 - total flux cleaned = 0.367707 Jy ! Total flux subtracted in 100 components = 0.367707 Jy ! Clean residual min=-0.021637 max=0.047131 Jy/beam ! Clean residual mean=0.000476 rms=0.006687 Jy/beam ! Combined flux in latest and established models = 0.367707 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.367707 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.315079Jy sigma=0.001435 ! Fit after self-cal, rms=0.314742Jy sigma=0.001434 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0545057 Jy ! Component: 100 - total flux cleaned = 0.0868715 Jy ! Total flux subtracted in 100 components = 0.0868715 Jy ! Clean residual min=-0.018441 max=0.036381 Jy/beam ! Clean residual mean=0.000344 rms=0.005090 Jy/beam ! Combined flux in latest and established models = 0.454579 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 25 components and 0.454579 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.292693Jy sigma=0.001184 ! Fit after self-cal, rms=0.292518Jy sigma=0.001184 ! Inverting map ! Added new window around map position (-5.5, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0350869 Jy ! Component: 100 - total flux cleaned = 0.058101 Jy ! Total flux subtracted in 100 components = 0.058101 Jy ! Clean residual min=-0.017065 max=0.031466 Jy/beam ! Clean residual mean=0.000261 rms=0.004254 Jy/beam ! Combined flux in latest and established models = 0.51268 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 54 components and 0.51268 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.282163Jy sigma=0.001060 ! Fit after self-cal, rms=0.281694Jy sigma=0.001050 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.972 mas, bmaj=7.611 mas, bpa=-4.156 degrees ! Estimated noise=1390.85 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0412162 Jy ! Component: 100 - total flux cleaned = 0.0667391 Jy ! Component: 150 - total flux cleaned = 0.0839664 Jy ! Component: 200 - total flux cleaned = 0.0956857 Jy ! Total flux subtracted in 200 components = 0.0956857 Jy ! Clean residual min=-0.015057 max=0.026288 Jy/beam ! Clean residual mean=0.000303 rms=0.004156 Jy/beam ! Combined flux in latest and established models = 0.608366 Jy ! Performing phase self-cal ! Adding 55 model components to the UV plane model. ! The established model now contains 94 components and 0.608365 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.271686Jy sigma=0.000952 ! Fit after self-cal, rms=0.271174Jy sigma=0.000942 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 24 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.12 HN 1.28 KP 1.08 ! LA 0.99 MK 0.99 NL 1.22 OV 0.97 ! PT 1.02 SC 0.96 ! ! ! Correcting IF 2. ! A total of 27 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.73 HN 1.30 KP 1.02 ! LA 0.96 MK 0.97 NL 1.36 OV 1.03 ! PT 1.00 SC 1.00 ! ! ! Correcting IF 3. ! A total of 24 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.94 HN 1.26 KP 0.88 ! LA 0.76 MK 1.01 NL 1.22 OV 0.94 ! PT 0.99 SC 0.98 ! ! ! Correcting IF 4. ! A total of 24 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 0.80 HN 1.27 KP 0.82 ! LA 0.80 MK 1.01 NL 1.08 OV 0.99 ! PT 1.02 SC 0.98 ! ! ! Fit before self-cal, rms=0.271174Jy sigma=0.000942 ! Fit after self-cal, rms=0.227751Jy sigma=0.000788 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.024 mas, bmaj=7.65 mas, bpa=-3.034 degrees ! Estimated noise=1418.46 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0003618 Jy ! Component: 100 - total flux cleaned = 0.000831335 Jy ! Component: 150 - total flux cleaned = 0.00119273 Jy ! Component: 200 - total flux cleaned = 0.00132032 Jy ! Total flux subtracted in 200 components = 0.00132032 Jy ! Clean residual min=-0.006908 max=0.008578 Jy/beam ! Clean residual mean=0.000039 rms=0.001868 Jy/beam ! Combined flux in latest and established models = 0.609686 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 102 components and 0.609686 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.227665Jy sigma=0.000787 ! Fit after self-cal, rms=0.227877Jy sigma=0.000787 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.227877Jy sigma=0.000787 ! Fit after self-cal, rms=0.225655Jy sigma=0.000760 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.02 mas, bmaj=7.624 mas, bpa=-2.951 degrees ! Estimated noise=1417.49 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.76352e-05 Jy ! Component: 100 - total flux cleaned = 0.000103049 Jy ! Component: 150 - total flux cleaned = 0.000102523 Jy ! Component: 200 - total flux cleaned = 0.000222649 Jy ! Total flux subtracted in 200 components = 0.000222649 Jy ! Clean residual min=-0.005298 max=0.007427 Jy/beam ! Clean residual mean=-0.000004 rms=0.001291 Jy/beam ! Combined flux in latest and established models = 0.609908 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 108 components and 0.609908 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.225585Jy sigma=0.000760 ! Fit after self-cal, rms=0.225710Jy sigma=0.000760 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-12.5, 10). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00643343 Jy ! Component: 100 - total flux cleaned = 0.0084792 Jy ! Component: 150 - total flux cleaned = 0.00865851 Jy ! Component: 200 - total flux cleaned = 0.00865706 Jy ! Total flux subtracted in 200 components = 0.00865706 Jy ! Clean residual min=-0.004564 max=0.004719 Jy/beam ! Clean residual mean=-0.000034 rms=0.001142 Jy/beam ! Combined flux in latest and established models = 0.618565 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 138 components and 0.618565 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.225432Jy sigma=0.000757 ! Fit after self-cal, rms=0.225399Jy sigma=0.000757 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.225399Jy sigma=0.000757 ! Fit after self-cal, rms=0.204143Jy sigma=0.000755 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.015 mas, bmaj=7.599 mas, bpa=-2.919 degrees ! Estimated noise=1410.57 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00219539 Jy ! Component: 100 - total flux cleaned = 0.00262809 Jy ! Component: 150 - total flux cleaned = 0.0025628 Jy ! Component: 200 - total flux cleaned = 0.00262537 Jy ! Total flux subtracted in 200 components = 0.00262537 Jy ! Clean residual min=-0.004602 max=0.004234 Jy/beam ! Clean residual mean=-0.000031 rms=0.001025 Jy/beam ! Combined flux in latest and established models = 0.621191 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 151 components and 0.621191 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.204026Jy sigma=0.000754 ! Fit after self-cal, rms=0.204021Jy sigma=0.000754 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000552013 Jy ! Component: 100 - total flux cleaned = 0.000670756 Jy ! Component: 150 - total flux cleaned = 0.000615611 Jy ! Component: 200 - total flux cleaned = 0.00056335 Jy ! Total flux subtracted in 200 components = 0.00056335 Jy ! Clean residual min=-0.004565 max=0.004223 Jy/beam ! Clean residual mean=-0.000033 rms=0.001010 Jy/beam ! Combined flux in latest and established models = 0.621754 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 162 components and 0.621754 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.203956Jy sigma=0.000753 ! Fit after self-cal, rms=0.203964Jy sigma=0.000753 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.203964Jy sigma=0.000753 ! Fit after self-cal, rms=0.203482Jy sigma=0.000753 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.966 mas, bmaj=20.12 mas, bpa=1.685 degrees ! Estimated noise=1873.23 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000347797 Jy ! Component: 100 - total flux cleaned = 0.000412737 Jy ! Component: 150 - total flux cleaned = 0.00036012 Jy ! Component: 200 - total flux cleaned = 0.000263055 Jy ! Total flux subtracted in 200 components = 0.000263055 Jy ! Clean residual min=-0.004259 max=0.004372 Jy/beam ! Clean residual mean=-0.000061 rms=0.001236 Jy/beam ! Combined flux in latest and established models = 0.622017 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 169 components and 0.622017 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.203419Jy sigma=0.000753 ! Fit after self-cal, rms=0.203419Jy sigma=0.000753 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000239939 Jy ! Component: 100 - total flux cleaned = 0.000196625 Jy ! Component: 150 - total flux cleaned = 0.000198177 Jy ! Component: 200 - total flux cleaned = 0.000158494 Jy ! Total flux subtracted in 200 components = 0.000158494 Jy ! Clean residual min=-0.004287 max=0.004341 Jy/beam ! Clean residual mean=-0.000061 rms=0.001209 Jy/beam ! Combined flux in latest and established models = 0.622176 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 175 components and 0.622176 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.203380Jy sigma=0.000753 ! Fit after self-cal, rms=0.203387Jy sigma=0.000753 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.014 mas, bmaj=7.587 mas, bpa=-2.887 degrees ! Estimated noise=1407.44 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.014 x 7.587 at -2.887 degrees (North through East) ! Clean map min=-0.0044137 max=0.36496 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.486 mas, bmaj=6.154 mas, bpa=-2.132 degrees ! Estimated noise=1924.94 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.275153 Jy ! Component: 100 - total flux cleaned = 0.376005 Jy ! Component: 150 - total flux cleaned = 0.434925 Jy ! Component: 200 - total flux cleaned = 0.473955 Jy ! Total flux subtracted in 200 components = 0.473955 Jy ! Clean residual min=-0.010045 max=0.023139 Jy/beam ! Clean residual mean=0.000238 rms=0.003442 Jy/beam ! Combined flux in latest and established models = 0.473955 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 32 model components to the UV plane model. ! The established model now contains 32 components and 0.473955 Jy ! Inverting map and beam ! Estimated beam: bmin=3.014 mas, bmaj=7.587 mas, bpa=-2.887 degrees ! Estimated noise=1407.44 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0485351 Jy ! Component: 100 - total flux cleaned = 0.0779895 Jy ! Component: 150 - total flux cleaned = 0.0974366 Jy ! Component: 200 - total flux cleaned = 0.111071 Jy ! Total flux subtracted in 200 components = 0.111071 Jy ! Clean residual min=-0.005950 max=0.009735 Jy/beam ! Clean residual mean=0.000116 rms=0.001816 Jy/beam ! Combined flux in latest and established models = 0.585027 Jy ! Adding 83 model components to the UV plane model. ! The established model now contains 104 components and 0.585027 Jy ! Inverting map ! Added new window around map position (-9.5, -5.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0102919 Jy ! Component: 100 - total flux cleaned = 0.0174136 Jy ! Component: 150 - total flux cleaned = 0.0226447 Jy ! Component: 200 - total flux cleaned = 0.0265087 Jy ! Total flux subtracted in 200 components = 0.0265087 Jy ! Clean residual min=-0.004942 max=0.004293 Jy/beam ! Clean residual mean=0.000014 rms=0.001079 Jy/beam ! Combined flux in latest and established models = 0.611535 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 130 components and 0.611535 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.966 mas, bmaj=20.12 mas, bpa=1.685 degrees ! Estimated noise=1873.23 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00494112 Jy ! Component: 100 - total flux cleaned = 0.00769866 Jy ! Component: 150 - total flux cleaned = 0.00927074 Jy ! Component: 200 - total flux cleaned = 0.00961463 Jy ! Total flux subtracted in 200 components = 0.00961463 Jy ! Clean residual min=-0.004363 max=0.004366 Jy/beam ! Clean residual mean=-0.000048 rms=0.001208 Jy/beam ! Combined flux in latest and established models = 0.62115 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000111128 Jy ! Component: 100 - total flux cleaned = 0.000177607 Jy ! Component: 150 - total flux cleaned = 0.000241031 Jy ! Component: 200 - total flux cleaned = 0.000269865 Jy ! Total flux subtracted in 200 components = 0.000269865 Jy ! Clean residual min=-0.004218 max=0.004364 Jy/beam ! Clean residual mean=-0.000051 rms=0.001196 Jy/beam ! Combined flux in latest and established models = 0.62142 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 161 components and 0.62142 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.014 mas, bmaj=7.587 mas, bpa=-2.887 degrees ! Estimated noise=1407.44 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000891001 Jy ! Component: 100 - total flux cleaned = -0.00102239 Jy ! Component: 150 - total flux cleaned = -0.000966336 Jy ! Component: 200 - total flux cleaned = -0.000864762 Jy ! Total flux subtracted in 200 components = -0.000864762 Jy ! Clean residual min=-0.004646 max=0.003966 Jy/beam ! Clean residual mean=-0.000021 rms=0.000979 Jy/beam ! Combined flux in latest and established models = 0.620555 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 178 components and 0.620555 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.203277Jy sigma=0.000753 ! Fit after self-cal, rms=0.203323Jy sigma=0.000753 wmodel J1316-3338_S_2015_01_23_pus_map.mod ! Writing 178 model components to file: J1316-3338_S_2015_01_23_pus_map.mod wobs J1316-3338_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J1316-3338_S_2015_01_23_pus_uvs.fits wwins J1316-3338_S_2015_01_23_pus_map.win ! wwins: Wrote 4 windows to J1316-3338_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00107801 Jy ! Component: 100 - total flux cleaned = -0.00128867 Jy ! Component: 150 - total flux cleaned = -0.0014838 Jy ! Component: 200 - total flux cleaned = -0.00179778 Jy ! Component: 250 - total flux cleaned = -0.00210086 Jy ! Component: 300 - total flux cleaned = -0.00233616 Jy ! Component: 350 - total flux cleaned = -0.00250566 Jy ! Component: 400 - total flux cleaned = -0.00256012 Jy ! Component: 450 - total flux cleaned = -0.00239863 Jy ! Component: 500 - total flux cleaned = -0.00234636 Jy ! Component: 550 - total flux cleaned = -0.0021914 Jy ! Component: 600 - total flux cleaned = -0.00219226 Jy ! Component: 650 - total flux cleaned = -0.00209236 Jy ! Component: 700 - total flux cleaned = -0.00199488 Jy ! Component: 750 - total flux cleaned = -0.00189845 Jy ! Component: 800 - total flux cleaned = -0.00189805 Jy ! Component: 850 - total flux cleaned = -0.00166483 Jy ! Component: 900 - total flux cleaned = -0.001665 Jy ! Component: 950 - total flux cleaned = -0.00157424 Jy ! Component: 1000 - total flux cleaned = -0.00152966 Jy ! Component: 1050 - total flux cleaned = -0.00152929 Jy ! Component: 1100 - total flux cleaned = -0.00152954 Jy ! Component: 1150 - total flux cleaned = -0.00148651 Jy ! Component: 1200 - total flux cleaned = -0.00144388 Jy ! Component: 1250 - total flux cleaned = -0.0014443 Jy ! Component: 1300 - total flux cleaned = -0.00148616 Jy ! Component: 1350 - total flux cleaned = -0.00144398 Jy ! Component: 1400 - total flux cleaned = -0.00128069 Jy ! Component: 1450 - total flux cleaned = -0.00128145 Jy ! Component: 1500 - total flux cleaned = -0.00140224 Jy ! Component: 1550 - total flux cleaned = -0.00144166 Jy ! Component: 1600 - total flux cleaned = -0.00136366 Jy ! Component: 1650 - total flux cleaned = -0.00132476 Jy ! Component: 1700 - total flux cleaned = -0.00136353 Jy ! Component: 1750 - total flux cleaned = -0.00121066 Jy ! Component: 1800 - total flux cleaned = -0.00140006 Jy ! Component: 1850 - total flux cleaned = -0.00128745 Jy ! Component: 1900 - total flux cleaned = -0.0011758 Jy ! Component: 1950 - total flux cleaned = -0.00121304 Jy ! Component: 2000 - total flux cleaned = -0.00113985 Jy ! Component: 2050 - total flux cleaned = -0.000994992 Jy ! Component: 2100 - total flux cleaned = -0.00103115 Jy ! Component: 2150 - total flux cleaned = -0.000888651 Jy ! Component: 2200 - total flux cleaned = -0.000888836 Jy ! Component: 2250 - total flux cleaned = -0.000853618 Jy ! Component: 2300 - total flux cleaned = -0.000854218 Jy ! Component: 2350 - total flux cleaned = -0.000923567 Jy ! Component: 2400 - total flux cleaned = -0.00099283 Jy ! Component: 2450 - total flux cleaned = -0.0010954 Jy ! Component: 2500 - total flux cleaned = -0.00106094 Jy ! Component: 2550 - total flux cleaned = -0.00102765 Jy ! Component: 2600 - total flux cleaned = -0.00106187 Jy ! Component: 2650 - total flux cleaned = -0.00109549 Jy ! Component: 2700 - total flux cleaned = -0.00116161 Jy ! Component: 2750 - total flux cleaned = -0.0012602 Jy ! Component: 2800 - total flux cleaned = -0.00142314 Jy ! Component: 2850 - total flux cleaned = -0.00132663 Jy ! Component: 2900 - total flux cleaned = -0.00151967 Jy ! Component: 2950 - total flux cleaned = -0.00158337 Jy ! Component: 3000 - total flux cleaned = -0.00164673 Jy ! Component: 3050 - total flux cleaned = -0.00158357 Jy ! Component: 3100 - total flux cleaned = -0.0016466 Jy ! Component: 3150 - total flux cleaned = -0.00180228 Jy ! Component: 3200 - total flux cleaned = -0.00183341 Jy ! Component: 3250 - total flux cleaned = -0.00192551 Jy ! Component: 3300 - total flux cleaned = -0.00192553 Jy ! Component: 3350 - total flux cleaned = -0.00198661 Jy ! Component: 3400 - total flux cleaned = -0.00198628 Jy ! Component: 3450 - total flux cleaned = -0.00204654 Jy ! Component: 3500 - total flux cleaned = -0.00207642 Jy ! Component: 3550 - total flux cleaned = -0.00201685 Jy ! Component: 3600 - total flux cleaned = -0.00210568 Jy ! Component: 3650 - total flux cleaned = -0.00219422 Jy ! Component: 3700 - total flux cleaned = -0.00222373 Jy ! Component: 3750 - total flux cleaned = -0.0023113 Jy ! Component: 3800 - total flux cleaned = -0.00231123 Jy ! Component: 3850 - total flux cleaned = -0.00225349 Jy ! Component: 3900 - total flux cleaned = -0.00242582 Jy ! Component: 3950 - total flux cleaned = -0.00248291 Jy ! Component: 4000 - total flux cleaned = -0.00242621 Jy ! Component: 4050 - total flux cleaned = -0.00242631 Jy ! Total flux subtracted in 4096 components = -0.00248248 Jy ! Clean residual min=-0.001714 max=0.001618 Jy/beam ! Clean residual mean=0.000002 rms=0.000515 Jy/beam ! Combined flux in latest and established models = 0.618073 Jy keep ! Adding 295 model components to the UV plane model. ! The established model now contains 473 components and 0.618072 Jy ![Exited script file: muppet] wmap "J1316-3338_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.014 x 7.587 at -2.887 degrees (North through East) ! Clean map min=-0.0038396 max=0.36726 Jy/beam ! Writing clean map to FITS file: J1316-3338_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.367259 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000508823 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.415639 0.415639 0.831277 1.66255 3.32511 6.65022 13.3004 26.6009 53.2017 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0015 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.367 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.014 x 7.587 at -2.887 degrees (North through East) ! Clean map min=-0.0038396 max=0.36726 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1316-3338_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 19:25:53 2017