! Started logfile: J1313-2722_S_2015_01_22_pus_uvs.log on Tue Jan 3 22:53:28 2017 obs J1313-2722_S_2015_01_22_pus_uva.fits ! Reading UV FITS file: J1313-2722_S_2015_01_22_pus_uva.fits ! AN table 1: 59 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.8 visibilities/baseline/integration-bin. ! Found source: J1313-2722 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 281 lines of history. ! ! Reading 8496 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1313-2722_S_2015_01_22_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 88 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 59 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 59 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 59 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.896244Jy sigma=0.008364 ! Fit after self-cal, rms=0.878807Jy sigma=0.008239 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.343 mas, bmaj=6.25 mas, bpa=6.628 degrees ! Estimated noise=1706.52 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0927159 Jy ! Component: 100 - total flux cleaned = 0.117573 Jy ! Total flux subtracted in 100 components = 0.117573 Jy ! Clean residual min=-0.012631 max=0.020202 Jy/beam ! Clean residual mean=-0.000058 rms=0.003517 Jy/beam ! Combined flux in latest and established models = 0.117573 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.117573 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105043Jy sigma=0.000861 ! Fit after self-cal, rms=0.105012Jy sigma=0.000860 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.844 mas, bmaj=7.591 mas, bpa=3.783 degrees ! Estimated noise=856.823 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-17, 57). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0254462 Jy ! Component: 100 - total flux cleaned = 0.039087 Jy ! Component: 150 - total flux cleaned = 0.0478351 Jy ! Component: 200 - total flux cleaned = 0.0537834 Jy ! Total flux subtracted in 200 components = 0.0537834 Jy ! Clean residual min=-0.005998 max=0.007721 Jy/beam ! Clean residual mean=-0.000022 rms=0.001763 Jy/beam ! Combined flux in latest and established models = 0.171357 Jy ! Performing phase self-cal ! Adding 54 model components to the UV plane model. ! The established model now contains 63 components and 0.171357 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098970Jy sigma=0.000789 ! Fit after self-cal, rms=0.098694Jy sigma=0.000787 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.00* HN 1.26 KP 1.06 ! LA 1.09 MK 1.04 NL 1.53 OV 0.95 ! PT 1.02 SC 1.06 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00* HN 1.20 KP 0.97 ! LA 1.03 MK 1.02 NL 1.22 OV 0.98 ! PT 1.03 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.00* HN 1.38 KP 0.85 ! LA 0.83 MK 1.05 NL 0.98 OV 0.90 ! PT 0.97 SC 1.05 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.00* HN 1.17 KP 0.79 ! LA 0.89 MK 1.05 NL 0.75 OV 0.95 ! PT 0.99 SC 1.01 ! ! ! Fit before self-cal, rms=0.098694Jy sigma=0.000787 ! Fit after self-cal, rms=0.101878Jy sigma=0.000759 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.899 mas, bmaj=7.641 mas, bpa=4.122 degrees ! Estimated noise=868.816 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00119387 Jy ! Component: 100 - total flux cleaned = -0.00171094 Jy ! Component: 150 - total flux cleaned = -0.00194306 Jy ! Component: 200 - total flux cleaned = -0.0020253 Jy ! Total flux subtracted in 200 components = -0.0020253 Jy ! Clean residual min=-0.003131 max=0.003875 Jy/beam ! Clean residual mean=-0.000016 rms=0.000805 Jy/beam ! Combined flux in latest and established models = 0.169331 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 86 components and 0.169331 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101805Jy sigma=0.000758 ! Fit after self-cal, rms=0.101953Jy sigma=0.000758 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101953Jy sigma=0.000758 ! Fit after self-cal, rms=0.103185Jy sigma=0.000758 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.906 mas, bmaj=7.649 mas, bpa=4.145 degrees ! Estimated noise=872.889 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000903925 Jy ! Component: 100 - total flux cleaned = -0.0013157 Jy ! Component: 150 - total flux cleaned = -0.00147339 Jy ! Component: 200 - total flux cleaned = -0.0015787 Jy ! Total flux subtracted in 200 components = -0.0015787 Jy ! Clean residual min=-0.003079 max=0.003720 Jy/beam ! Clean residual mean=-0.000017 rms=0.000785 Jy/beam ! Combined flux in latest and established models = 0.167753 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 92 components and 0.167753 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103145Jy sigma=0.000757 ! Fit after self-cal, rms=0.103151Jy sigma=0.000757 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-56, 58). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00317596 Jy ! Component: 100 - total flux cleaned = 0.00466789 Jy ! Component: 150 - total flux cleaned = 0.00536414 Jy ! Component: 200 - total flux cleaned = 0.00561544 Jy ! Total flux subtracted in 200 components = 0.00561544 Jy ! Clean residual min=-0.003035 max=0.002892 Jy/beam ! Clean residual mean=-0.000007 rms=0.000684 Jy/beam ! Combined flux in latest and established models = 0.173368 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 111 components and 0.173368 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103038Jy sigma=0.000756 ! Fit after self-cal, rms=0.103029Jy sigma=0.000756 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103029Jy sigma=0.000756 ! Fit after self-cal, rms=0.103835Jy sigma=0.000756 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.91 mas, bmaj=7.659 mas, bpa=4.132 degrees ! Estimated noise=874.682 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000290038 Jy ! Component: 100 - total flux cleaned = 0.000175053 Jy ! Component: 150 - total flux cleaned = 0.000177939 Jy ! Component: 200 - total flux cleaned = 0.000207486 Jy ! Total flux subtracted in 200 components = 0.000207486 Jy ! Clean residual min=-0.002997 max=0.002762 Jy/beam ! Clean residual mean=0.000004 rms=0.000654 Jy/beam ! Combined flux in latest and established models = 0.173576 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 119 components and 0.173576 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103802Jy sigma=0.000756 ! Fit after self-cal, rms=0.103810Jy sigma=0.000756 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.13906e-05 Jy ! Component: 100 - total flux cleaned = -4.93792e-05 Jy ! Component: 150 - total flux cleaned = -4.868e-05 Jy ! Component: 200 - total flux cleaned = -7.35054e-05 Jy ! Total flux subtracted in 200 components = -7.35054e-05 Jy ! Clean residual min=-0.002989 max=0.002742 Jy/beam ! Clean residual mean=0.000003 rms=0.000647 Jy/beam ! Combined flux in latest and established models = 0.173502 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 122 components and 0.173502 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103795Jy sigma=0.000756 ! Fit after self-cal, rms=0.103795Jy sigma=0.000756 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103795Jy sigma=0.000756 ! Fit after self-cal, rms=0.104433Jy sigma=0.000756 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.418 mas, bmaj=20.52 mas, bpa=9.253 degrees ! Estimated noise=1091.02 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000194672 Jy ! Component: 100 - total flux cleaned = -0.000195646 Jy ! Component: 150 - total flux cleaned = -0.000147426 Jy ! Component: 200 - total flux cleaned = -0.000106631 Jy ! Total flux subtracted in 200 components = -0.000106631 Jy ! Clean residual min=-0.002356 max=0.002705 Jy/beam ! Clean residual mean=0.000020 rms=0.000744 Jy/beam ! Combined flux in latest and established models = 0.173395 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 125 components and 0.173395 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104427Jy sigma=0.000756 ! Fit after self-cal, rms=0.104433Jy sigma=0.000755 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000104902 Jy ! Component: 100 - total flux cleaned = -6.69139e-05 Jy ! Component: 150 - total flux cleaned = -1.76675e-05 Jy ! Component: 200 - total flux cleaned = 4.21803e-05 Jy ! Total flux subtracted in 200 components = 4.21803e-05 Jy ! Clean residual min=-0.002304 max=0.002720 Jy/beam ! Clean residual mean=0.000021 rms=0.000728 Jy/beam ! Combined flux in latest and established models = 0.173438 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 127 components and 0.173438 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104432Jy sigma=0.000755 ! Fit after self-cal, rms=0.104434Jy sigma=0.000755 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.913 mas, bmaj=7.664 mas, bpa=4.128 degrees ! Estimated noise=875.942 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.913 x 7.664 at 4.128 degrees (North through East) ! Clean map min=-0.002685 max=0.11311 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.378 mas, bmaj=6.264 mas, bpa=7.531 degrees ! Estimated noise=1793.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0969875 Jy ! Component: 100 - total flux cleaned = 0.124296 Jy ! Component: 150 - total flux cleaned = 0.139243 Jy ! Component: 200 - total flux cleaned = 0.148458 Jy ! Total flux subtracted in 200 components = 0.148458 Jy ! Clean residual min=-0.006715 max=0.008355 Jy/beam ! Clean residual mean=-0.000025 rms=0.001751 Jy/beam ! Combined flux in latest and established models = 0.148458 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.148458 Jy ! Inverting map and beam ! Estimated beam: bmin=2.913 mas, bmaj=7.664 mas, bpa=4.128 degrees ! Estimated noise=875.942 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (21, -50). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00784765 Jy ! Component: 100 - total flux cleaned = 0.0125084 Jy ! Component: 150 - total flux cleaned = 0.0159482 Jy ! Component: 200 - total flux cleaned = 0.0185664 Jy ! Total flux subtracted in 200 components = 0.0185664 Jy ! Clean residual min=-0.003285 max=0.003269 Jy/beam ! Clean residual mean=-0.000008 rms=0.000782 Jy/beam ! Combined flux in latest and established models = 0.167025 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 55 components and 0.167025 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.418 mas, bmaj=20.52 mas, bpa=9.253 degrees ! Estimated noise=1091.02 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00251908 Jy ! Component: 100 - total flux cleaned = 0.00414483 Jy ! Component: 150 - total flux cleaned = 0.00497649 Jy ! Component: 200 - total flux cleaned = 0.00513223 Jy ! Total flux subtracted in 200 components = 0.00513223 Jy ! Clean residual min=-0.002733 max=0.002933 Jy/beam ! Clean residual mean=0.000014 rms=0.000802 Jy/beam ! Combined flux in latest and established models = 0.172157 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000144712 Jy ! Component: 100 - total flux cleaned = 0.000280646 Jy ! Component: 150 - total flux cleaned = 0.000406558 Jy ! Component: 200 - total flux cleaned = 0.00052365 Jy ! Total flux subtracted in 200 components = 0.00052365 Jy ! Clean residual min=-0.002506 max=0.002898 Jy/beam ! Clean residual mean=0.000017 rms=0.000757 Jy/beam ! Combined flux in latest and established models = 0.172681 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 71 components and 0.172681 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.913 mas, bmaj=7.664 mas, bpa=4.128 degrees ! Estimated noise=875.942 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00020562 Jy ! Component: 100 - total flux cleaned = -0.000148514 Jy ! Component: 150 - total flux cleaned = -0.000149342 Jy ! Component: 200 - total flux cleaned = -0.000149598 Jy ! Total flux subtracted in 200 components = -0.000149598 Jy ! Clean residual min=-0.002837 max=0.002547 Jy/beam ! Clean residual mean=0.000007 rms=0.000667 Jy/beam ! Combined flux in latest and established models = 0.172531 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 93 components and 0.172531 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104525Jy sigma=0.000756 ! Fit after self-cal, rms=0.104491Jy sigma=0.000756 wmodel J1313-2722_S_2015_01_22_pus_map.mod ! Writing 93 model components to file: J1313-2722_S_2015_01_22_pus_map.mod wobs J1313-2722_S_2015_01_22_pus_uvs.fits ! Writing UV FITS file: J1313-2722_S_2015_01_22_pus_uvs.fits wwins J1313-2722_S_2015_01_22_pus_map.win ! wwins: Wrote 4 windows to J1313-2722_S_2015_01_22_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000930187 Jy ! Component: 100 - total flux cleaned = -0.00114981 Jy ! Component: 150 - total flux cleaned = -0.00142652 Jy ! Component: 200 - total flux cleaned = -0.00183972 Jy ! Component: 250 - total flux cleaned = -0.00219774 Jy ! Component: 300 - total flux cleaned = -0.00240418 Jy ! Component: 350 - total flux cleaned = -0.0027012 Jy ! Component: 400 - total flux cleaned = -0.00295648 Jy ! Component: 450 - total flux cleaned = -0.00320391 Jy ! Component: 500 - total flux cleaned = -0.00350433 Jy ! Component: 550 - total flux cleaned = -0.00367921 Jy ! Component: 600 - total flux cleaned = -0.00376437 Jy ! Component: 650 - total flux cleaned = -0.00384704 Jy ! Component: 700 - total flux cleaned = -0.00398178 Jy ! Component: 750 - total flux cleaned = -0.00416534 Jy ! Component: 800 - total flux cleaned = -0.0042424 Jy ! Component: 850 - total flux cleaned = -0.00441819 Jy ! Component: 900 - total flux cleaned = -0.00449245 Jy ! Component: 950 - total flux cleaned = -0.00461316 Jy ! Component: 1000 - total flux cleaned = -0.00468425 Jy ! Component: 1050 - total flux cleaned = -0.00475428 Jy ! Component: 1100 - total flux cleaned = -0.00484571 Jy ! Component: 1150 - total flux cleaned = -0.00491303 Jy ! Component: 1200 - total flux cleaned = -0.0050236 Jy ! Component: 1250 - total flux cleaned = -0.00504533 Jy ! Component: 1300 - total flux cleaned = -0.00506635 Jy ! Component: 1350 - total flux cleaned = -0.00512958 Jy ! Component: 1400 - total flux cleaned = -0.00521285 Jy ! Component: 1450 - total flux cleaned = -0.00533613 Jy ! Component: 1500 - total flux cleaned = -0.00541697 Jy ! Component: 1550 - total flux cleaned = -0.0054966 Jy ! Component: 1600 - total flux cleaned = -0.00553596 Jy ! Component: 1650 - total flux cleaned = -0.00563347 Jy ! Component: 1700 - total flux cleaned = -0.00567189 Jy ! Component: 1750 - total flux cleaned = -0.00574833 Jy ! Component: 1800 - total flux cleaned = -0.00576698 Jy ! Component: 1850 - total flux cleaned = -0.00586029 Jy ! Component: 1900 - total flux cleaned = -0.00589708 Jy ! Component: 1950 - total flux cleaned = -0.00597025 Jy ! Component: 2000 - total flux cleaned = -0.00606113 Jy ! Component: 2050 - total flux cleaned = -0.0060974 Jy ! Component: 2100 - total flux cleaned = -0.00624052 Jy ! Component: 2150 - total flux cleaned = -0.00625828 Jy ! Component: 2200 - total flux cleaned = -0.00632876 Jy ! Component: 2250 - total flux cleaned = -0.00641623 Jy ! Component: 2300 - total flux cleaned = -0.00646839 Jy ! Component: 2350 - total flux cleaned = -0.00652033 Jy ! Component: 2400 - total flux cleaned = -0.00658911 Jy ! Component: 2450 - total flux cleaned = -0.00667475 Jy ! Component: 2500 - total flux cleaned = -0.00670879 Jy ! Component: 2550 - total flux cleaned = -0.00674267 Jy ! Component: 2600 - total flux cleaned = -0.00681021 Jy ! Component: 2650 - total flux cleaned = -0.00686081 Jy ! Component: 2700 - total flux cleaned = -0.00692813 Jy ! Component: 2750 - total flux cleaned = -0.00692809 Jy ! Component: 2800 - total flux cleaned = -0.00697852 Jy ! Component: 2850 - total flux cleaned = -0.00697863 Jy ! Component: 2900 - total flux cleaned = -0.00706238 Jy ! Component: 2950 - total flux cleaned = -0.00712958 Jy ! Component: 3000 - total flux cleaned = -0.00719686 Jy ! Component: 3050 - total flux cleaned = -0.00726432 Jy ! Component: 3100 - total flux cleaned = -0.00731482 Jy ! Component: 3150 - total flux cleaned = -0.00741651 Jy ! Component: 3200 - total flux cleaned = -0.00750163 Jy ! Component: 3250 - total flux cleaned = -0.00755283 Jy ! Component: 3300 - total flux cleaned = -0.00765571 Jy ! Component: 3350 - total flux cleaned = -0.00774179 Jy ! Component: 3400 - total flux cleaned = -0.00781107 Jy ! Component: 3450 - total flux cleaned = -0.0079328 Jy ! Component: 3500 - total flux cleaned = -0.0080377 Jy ! Component: 3550 - total flux cleaned = -0.00814303 Jy ! Component: 3600 - total flux cleaned = -0.00826662 Jy ! Component: 3650 - total flux cleaned = -0.0083555 Jy ! Component: 3700 - total flux cleaned = -0.00846267 Jy ! Component: 3750 - total flux cleaned = -0.00858847 Jy ! Component: 3800 - total flux cleaned = -0.00869703 Jy ! Component: 3850 - total flux cleaned = -0.00878796 Jy ! Component: 3900 - total flux cleaned = -0.0088795 Jy ! Component: 3950 - total flux cleaned = -0.00895339 Jy ! Component: 4000 - total flux cleaned = -0.00904668 Jy ! Component: 4050 - total flux cleaned = -0.00910311 Jy ! Total flux subtracted in 4096 components = -0.00917896 Jy ! Clean residual min=-0.001065 max=0.001067 Jy/beam ! Clean residual mean=0.000000 rms=0.000298 Jy/beam ! Combined flux in latest and established models = 0.163352 Jy keep ! Adding 241 model components to the UV plane model. ! The established model now contains 334 components and 0.163352 Jy ![Exited script file: muppet] wmap "J1313-2722_S_2015_01_22_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.913 x 7.664 at 4.128 degrees (North through East) ! Clean map min=-0.0022448 max=0.1173 Jy/beam ! Writing clean map to FITS file: J1313-2722_S_2015_01_22_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.117296 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000284317 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.727182 0.727182 1.45436 2.90873 5.81746 11.6349 23.2698 46.5397 93.0794 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.117 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.913 x 7.664 at 4.128 degrees (North through East) ! Clean map min=-0.0022448 max=0.1173 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1313-2722_S_2015_01_22_pus_uvs.log closed on Tue Jan 3 22:53:35 2017