! Started logfile: J1309-0415_S_2014_08_09_pus_uvs.log on Tue Nov 29 23:05:49 2016 obs J1309-0415_S_2014_08_09_pus_uva.fits ! Reading UV FITS file: J1309-0415_S_2014_08_09_pus_uva.fits ! AN table 1: 124 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.86828 visibilities/baseline/integration-bin. ! Found source: J1309-0415 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 342 lines of history. ! ! Reading 19380 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1309-0415_S_2014_08_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 90 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 90 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 90 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 90 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.959784Jy sigma=0.009633 ! Fit after self-cal, rms=0.932739Jy sigma=0.009400 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.887 mas, bmaj=7.041 mas, bpa=4.451 degrees ! Estimated noise=758.419 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0535598 Jy ! Component: 100 - total flux cleaned = 0.0662792 Jy ! Total flux subtracted in 100 components = 0.0662792 Jy ! Clean residual min=-0.003375 max=0.005120 Jy/beam ! Clean residual mean=-0.000001 rms=0.000969 Jy/beam ! Combined flux in latest and established models = 0.0662792 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.0662792 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093855Jy sigma=0.000828 ! Fit after self-cal, rms=0.093764Jy sigma=0.000828 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.644 mas, bmaj=8.119 mas, bpa=5.267 degrees ! Estimated noise=513.38 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00718423 Jy ! Component: 100 - total flux cleaned = 0.0105393 Jy ! Component: 150 - total flux cleaned = 0.012183 Jy ! Component: 200 - total flux cleaned = 0.0130075 Jy ! Total flux subtracted in 200 components = 0.0130075 Jy ! Clean residual min=-0.002205 max=0.002245 Jy/beam ! Clean residual mean=0.000002 rms=0.000597 Jy/beam ! Combined flux in latest and established models = 0.0792867 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 40 components and 0.0792867 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093182Jy sigma=0.000823 ! Fit after self-cal, rms=0.093186Jy sigma=0.000823 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.90 HN 1.05 KP 1.03 ! LA 1.08 MK 0.99 NL 0.92 OV 1.02 ! PT 1.07 SC 1.01 ! ! ! Correcting IF 2. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.05 HN 1.04 KP 1.01 ! LA 1.04 MK 1.08 NL 1.00 OV 1.04 ! PT 1.03 SC 1.02 ! ! ! Correcting IF 3. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.14 HN 1.14 KP 0.92 ! LA 0.86 MK 1.10 NL 1.00 OV 0.97 ! PT 1.01 SC 1.02 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.05 HN 0.85 KP 0.85 ! LA 0.83 MK 1.11 NL 1.14 OV 0.92 ! PT 1.08 SC 1.03 ! ! ! Fit before self-cal, rms=0.093186Jy sigma=0.000823 ! Fit after self-cal, rms=0.088879Jy sigma=0.000819 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.682 mas, bmaj=8.205 mas, bpa=5.809 degrees ! Estimated noise=517.697 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000320011 Jy ! Component: 100 - total flux cleaned = 0.00030569 Jy ! Component: 150 - total flux cleaned = 0.000271152 Jy ! Component: 200 - total flux cleaned = 0.00024154 Jy ! Total flux subtracted in 200 components = 0.00024154 Jy ! Clean residual min=-0.001942 max=0.002026 Jy/beam ! Clean residual mean=-0.000000 rms=0.000510 Jy/beam ! Combined flux in latest and established models = 0.0795282 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 51 components and 0.0795283 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088874Jy sigma=0.000819 ! Fit after self-cal, rms=0.088872Jy sigma=0.000819 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088872Jy sigma=0.000819 ! Fit after self-cal, rms=0.086084Jy sigma=0.000816 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.688 mas, bmaj=8.215 mas, bpa=5.811 degrees ! Estimated noise=517.514 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000106221 Jy ! Component: 100 - total flux cleaned = 0.000122344 Jy ! Component: 150 - total flux cleaned = 0.000112509 Jy ! Component: 200 - total flux cleaned = 0.00010278 Jy ! Total flux subtracted in 200 components = 0.00010278 Jy ! Clean residual min=-0.001490 max=0.001868 Jy/beam ! Clean residual mean=0.000001 rms=0.000424 Jy/beam ! Combined flux in latest and established models = 0.079631 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 59 components and 0.079631 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086080Jy sigma=0.000816 ! Fit after self-cal, rms=0.086309Jy sigma=0.000815 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000119136 Jy ! Component: 100 - total flux cleaned = -0.000146132 Jy ! Component: 150 - total flux cleaned = -0.000154258 Jy ! Component: 200 - total flux cleaned = -0.000161631 Jy ! Total flux subtracted in 200 components = -0.000161631 Jy ! Clean residual min=-0.001480 max=0.001770 Jy/beam ! Clean residual mean=0.000000 rms=0.000435 Jy/beam ! Combined flux in latest and established models = 0.0794694 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 61 components and 0.0794694 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086307Jy sigma=0.000815 ! Fit after self-cal, rms=0.086313Jy sigma=0.000815 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086313Jy sigma=0.000815 ! Fit after self-cal, rms=0.088975Jy sigma=0.000814 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.696 mas, bmaj=8.241 mas, bpa=5.843 degrees ! Estimated noise=522.027 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000550742 Jy ! Component: 100 - total flux cleaned = 0.000607164 Jy ! Component: 150 - total flux cleaned = 0.000595929 Jy ! Component: 200 - total flux cleaned = 0.000585482 Jy ! Total flux subtracted in 200 components = 0.000585482 Jy ! Clean residual min=-0.001425 max=0.001756 Jy/beam ! Clean residual mean=0.000001 rms=0.000426 Jy/beam ! Combined flux in latest and established models = 0.0800549 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 64 components and 0.0800549 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088967Jy sigma=0.000814 ! Fit after self-cal, rms=0.089140Jy sigma=0.000814 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.41964e-05 Jy ! Component: 100 - total flux cleaned = -4.47295e-05 Jy ! Component: 150 - total flux cleaned = -4.49286e-05 Jy ! Component: 200 - total flux cleaned = -4.51255e-05 Jy ! Total flux subtracted in 200 components = -4.51255e-05 Jy ! Clean residual min=-0.001484 max=0.001689 Jy/beam ! Clean residual mean=0.000001 rms=0.000427 Jy/beam ! Combined flux in latest and established models = 0.0800098 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 66 components and 0.0800098 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089138Jy sigma=0.000814 ! Fit after self-cal, rms=0.089141Jy sigma=0.000814 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089141Jy sigma=0.000814 ! Fit after self-cal, rms=0.090908Jy sigma=0.000814 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.668 mas, bmaj=13 mas, bpa=3.48 degrees ! Estimated noise=621.109 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00070588 Jy ! Component: 100 - total flux cleaned = 0.000939743 Jy ! Component: 150 - total flux cleaned = 0.000964906 Jy ! Component: 200 - total flux cleaned = 0.000969255 Jy ! Total flux subtracted in 200 components = 0.000969255 Jy ! Clean residual min=-0.001413 max=0.001839 Jy/beam ! Clean residual mean=0.000002 rms=0.000459 Jy/beam ! Combined flux in latest and established models = 0.080979 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 73 components and 0.080979 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090906Jy sigma=0.000814 ! Fit after self-cal, rms=0.090976Jy sigma=0.000814 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.22439e-06 Jy ! Component: 100 - total flux cleaned = 1.23185e-05 Jy ! Component: 150 - total flux cleaned = 1.25872e-05 Jy ! Component: 200 - total flux cleaned = 1.30913e-05 Jy ! Total flux subtracted in 200 components = 1.30913e-05 Jy ! Clean residual min=-0.001408 max=0.001849 Jy/beam ! Clean residual mean=0.000002 rms=0.000458 Jy/beam ! Combined flux in latest and established models = 0.0809921 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 77 components and 0.0809921 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090976Jy sigma=0.000814 ! Fit after self-cal, rms=0.090976Jy sigma=0.000814 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.7 mas, bmaj=8.255 mas, bpa=5.805 degrees ! Estimated noise=526.372 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.7 x 8.255 at 5.805 degrees (North through East) ! Clean map min=-0.0014292 max=0.071692 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.969 mas, bmaj=7.171 mas, bpa=5.129 degrees ! Estimated noise=781.049 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0547678 Jy ! Component: 100 - total flux cleaned = 0.067892 Jy ! Component: 150 - total flux cleaned = 0.0734619 Jy ! Component: 200 - total flux cleaned = 0.076372 Jy ! Total flux subtracted in 200 components = 0.076372 Jy ! Clean residual min=-0.002721 max=0.002744 Jy/beam ! Clean residual mean=0.000001 rms=0.000720 Jy/beam ! Combined flux in latest and established models = 0.076372 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.076372 Jy ! Inverting map and beam ! Estimated beam: bmin=3.7 mas, bmaj=8.255 mas, bpa=5.805 degrees ! Estimated noise=526.372 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00240071 Jy ! Component: 100 - total flux cleaned = 0.00360961 Jy ! Component: 150 - total flux cleaned = 0.00399539 Jy ! Component: 200 - total flux cleaned = 0.00414278 Jy ! Total flux subtracted in 200 components = 0.00414278 Jy ! Clean residual min=-0.001584 max=0.001769 Jy/beam ! Clean residual mean=0.000001 rms=0.000431 Jy/beam ! Combined flux in latest and established models = 0.0805148 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 39 components and 0.0805148 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.668 mas, bmaj=13 mas, bpa=3.48 degrees ! Estimated noise=621.109 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000456731 Jy ! Component: 100 - total flux cleaned = 0.000521263 Jy ! Component: 150 - total flux cleaned = 0.000527175 Jy ! Component: 200 - total flux cleaned = 0.000532206 Jy ! Total flux subtracted in 200 components = 0.000532206 Jy ! Clean residual min=-0.001420 max=0.001839 Jy/beam ! Clean residual mean=0.000002 rms=0.000457 Jy/beam ! Combined flux in latest and established models = 0.081047 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.41286e-06 Jy ! Component: 100 - total flux cleaned = 7.45375e-06 Jy ! Component: 150 - total flux cleaned = 1.01089e-05 Jy ! Component: 200 - total flux cleaned = 9.82251e-06 Jy ! Total flux subtracted in 200 components = 9.82251e-06 Jy ! Clean residual min=-0.001423 max=0.001837 Jy/beam ! Clean residual mean=0.000002 rms=0.000456 Jy/beam ! Combined flux in latest and established models = 0.0810568 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 55 components and 0.0810568 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.7 mas, bmaj=8.255 mas, bpa=5.805 degrees ! Estimated noise=526.372 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00021266 Jy ! Component: 100 - total flux cleaned = -0.000240336 Jy ! Component: 150 - total flux cleaned = -0.0002771 Jy ! Component: 200 - total flux cleaned = -0.000298311 Jy ! Total flux subtracted in 200 components = -0.000298311 Jy ! Clean residual min=-0.001541 max=0.001745 Jy/beam ! Clean residual mean=0.000001 rms=0.000429 Jy/beam ! Combined flux in latest and established models = 0.0807585 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 60 components and 0.0807585 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090970Jy sigma=0.000814 ! Fit after self-cal, rms=0.090959Jy sigma=0.000814 wmodel J1309-0415_S_2014_08_09_pus_map.mod ! Writing 60 model components to file: J1309-0415_S_2014_08_09_pus_map.mod wobs J1309-0415_S_2014_08_09_pus_uvs.fits ! Writing UV FITS file: J1309-0415_S_2014_08_09_pus_uvs.fits wwins J1309-0415_S_2014_08_09_pus_map.win ! wwins: Wrote 1 windows to J1309-0415_S_2014_08_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000805491 Jy ! Component: 100 - total flux cleaned = 0.00139778 Jy ! Component: 150 - total flux cleaned = 0.00189978 Jy ! Component: 200 - total flux cleaned = 0.00232488 Jy ! Component: 250 - total flux cleaned = 0.00252963 Jy ! Component: 300 - total flux cleaned = 0.00257879 Jy ! Component: 350 - total flux cleaned = 0.00262689 Jy ! Component: 400 - total flux cleaned = 0.00257978 Jy ! Component: 450 - total flux cleaned = 0.00260297 Jy ! Component: 500 - total flux cleaned = 0.00262564 Jy ! Component: 550 - total flux cleaned = 0.00258139 Jy ! Component: 600 - total flux cleaned = 0.00253845 Jy ! Component: 650 - total flux cleaned = 0.00251761 Jy ! Component: 700 - total flux cleaned = 0.00253867 Jy ! Component: 750 - total flux cleaned = 0.00247694 Jy ! Component: 800 - total flux cleaned = 0.00251698 Jy ! Component: 850 - total flux cleaned = 0.00251703 Jy ! Component: 900 - total flux cleaned = 0.00263433 Jy ! Component: 950 - total flux cleaned = 0.00269226 Jy ! Component: 1000 - total flux cleaned = 0.00280629 Jy ! Component: 1050 - total flux cleaned = 0.00291881 Jy ! Component: 1100 - total flux cleaned = 0.00301123 Jy ! Component: 1150 - total flux cleaned = 0.00310226 Jy ! Component: 1200 - total flux cleaned = 0.0031924 Jy ! Component: 1250 - total flux cleaned = 0.00328169 Jy ! Component: 1300 - total flux cleaned = 0.00331704 Jy ! Component: 1350 - total flux cleaned = 0.0034388 Jy ! Component: 1400 - total flux cleaned = 0.00347335 Jy ! Component: 1450 - total flux cleaned = 0.00355809 Jy ! Component: 1500 - total flux cleaned = 0.00359175 Jy ! Component: 1550 - total flux cleaned = 0.00375747 Jy ! Component: 1600 - total flux cleaned = 0.00375719 Jy ! Component: 1650 - total flux cleaned = 0.00391917 Jy ! Component: 1700 - total flux cleaned = 0.00401533 Jy ! Component: 1750 - total flux cleaned = 0.00407883 Jy ! Component: 1800 - total flux cleaned = 0.00415739 Jy ! Component: 1850 - total flux cleaned = 0.00420398 Jy ! Component: 1900 - total flux cleaned = 0.00426576 Jy ! Component: 1950 - total flux cleaned = 0.00432689 Jy ! Component: 2000 - total flux cleaned = 0.00431165 Jy ! Component: 2050 - total flux cleaned = 0.00435667 Jy ! Component: 2100 - total flux cleaned = 0.00437169 Jy ! Component: 2150 - total flux cleaned = 0.00440129 Jy ! Component: 2200 - total flux cleaned = 0.00444509 Jy ! Component: 2250 - total flux cleaned = 0.00443066 Jy ! Component: 2300 - total flux cleaned = 0.00448807 Jy ! Component: 2350 - total flux cleaned = 0.00448817 Jy ! Component: 2400 - total flux cleaned = 0.00455862 Jy ! Component: 2450 - total flux cleaned = 0.00455872 Jy ! Component: 2500 - total flux cleaned = 0.00454484 Jy ! Component: 2550 - total flux cleaned = 0.00459983 Jy ! Component: 2600 - total flux cleaned = 0.00457267 Jy ! Component: 2650 - total flux cleaned = 0.00462682 Jy ! Component: 2700 - total flux cleaned = 0.00461355 Jy ! Component: 2750 - total flux cleaned = 0.00462697 Jy ! Component: 2800 - total flux cleaned = 0.00461381 Jy ! Component: 2850 - total flux cleaned = 0.00461388 Jy ! Component: 2900 - total flux cleaned = 0.00463998 Jy ! Component: 2950 - total flux cleaned = 0.00458827 Jy ! Component: 3000 - total flux cleaned = 0.00461411 Jy ! Component: 3050 - total flux cleaned = 0.00457606 Jy ! Component: 3100 - total flux cleaned = 0.00462661 Jy ! Component: 3150 - total flux cleaned = 0.00456367 Jy ! Component: 3200 - total flux cleaned = 0.0045886 Jy ! Component: 3250 - total flux cleaned = 0.00457622 Jy ! Component: 3300 - total flux cleaned = 0.00458847 Jy ! Component: 3350 - total flux cleaned = 0.00461277 Jy ! Component: 3400 - total flux cleaned = 0.00460061 Jy ! Component: 3450 - total flux cleaned = 0.00458841 Jy ! Component: 3500 - total flux cleaned = 0.00463635 Jy ! Component: 3550 - total flux cleaned = 0.00467215 Jy ! Component: 3600 - total flux cleaned = 0.00464853 Jy ! Component: 3650 - total flux cleaned = 0.00466027 Jy ! Component: 3700 - total flux cleaned = 0.0046603 Jy ! Component: 3750 - total flux cleaned = 0.00468351 Jy ! Component: 3800 - total flux cleaned = 0.00470653 Jy ! Component: 3850 - total flux cleaned = 0.00467212 Jy ! Component: 3900 - total flux cleaned = 0.00471787 Jy ! Component: 3950 - total flux cleaned = 0.00475187 Jy ! Component: 4000 - total flux cleaned = 0.00474043 Jy ! Component: 4050 - total flux cleaned = 0.00474039 Jy ! Total flux subtracted in 4096 components = 0.00475151 Jy ! Clean residual min=-0.000656 max=0.000763 Jy/beam ! Clean residual mean=0.000001 rms=0.000205 Jy/beam ! Combined flux in latest and established models = 0.08551 Jy keep ! Adding 296 model components to the UV plane model. ! The established model now contains 356 components and 0.08551 Jy ![Exited script file: muppet] wmap "J1309-0415_S_2014_08_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.7 x 8.255 at 5.805 degrees (North through East) ! Clean map min=-0.0014299 max=0.07188 Jy/beam ! Writing clean map to FITS file: J1309-0415_S_2014_08_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0718805 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000204224 device "J1309-0415_S_2014_08_09_pus\_map.eps/VPS" ! Attempting to open device: 'J1309-0415_S_2014_08_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.852349 0.852349 1.7047 3.4094 6.8188 13.6376 27.2752 54.5504 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.071 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.7 x 8.255 at 5.805 degrees (North through East) ! Clean map min=-0.0014299 max=0.07188 Jy/beam quit ! Quitting program ! Log file J1309-0415_S_2014_08_09_pus_uvs.log closed on Tue Nov 29 23:05:54 2016