! Started logfile: J1308-2458_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:27:49 2017 obs J1308-2458_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J1308-2458_S_2014_01_04_pus_uva.fits ! AN table 1: 118 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.777778 visibilities/baseline/integration-bin. ! Found source: J1308-2458 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 13216 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1308-2458_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 118 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 118 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 177 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 118 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.951435Jy sigma=0.011385 ! Fit after self-cal, rms=0.931849Jy sigma=0.011067 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.481 mas, bmaj=6.145 mas, bpa=-2.633 degrees ! Estimated noise=999.832 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0551092 Jy ! Component: 100 - total flux cleaned = 0.0671266 Jy ! Total flux subtracted in 100 components = 0.0671266 Jy ! Clean residual min=-0.004075 max=0.004251 Jy/beam ! Clean residual mean=-0.000024 rms=0.001066 Jy/beam ! Combined flux in latest and established models = 0.0671266 Jy ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 0.0671266 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087364Jy sigma=0.000879 ! Fit after self-cal, rms=0.087295Jy sigma=0.000877 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.164 mas, bmaj=7.419 mas, bpa=-2.602 degrees ! Estimated noise=567.548 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00337266 Jy ! Component: 100 - total flux cleaned = 0.0049734 Jy ! Component: 150 - total flux cleaned = 0.00581531 Jy ! Component: 200 - total flux cleaned = 0.00625304 Jy ! Total flux subtracted in 200 components = 0.00625304 Jy ! Clean residual min=-0.002833 max=0.003257 Jy/beam ! Clean residual mean=-0.000033 rms=0.000715 Jy/beam ! Combined flux in latest and established models = 0.0733797 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.0733797 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087115Jy sigma=0.000877 ! Fit after self-cal, rms=0.087149Jy sigma=0.000877 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 0.88 KP 1.00* LA 1.01 ! MK 0.99 NL 0.99 OV 0.98 PT 1.00 ! SC 0.92 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.01 KP 1.00* LA 0.93 ! MK 0.99 NL 1.03 OV 1.02 PT 0.98 ! SC 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.33 FD 1.21 KP 1.00* LA 0.86 ! MK 1.02 NL 1.06 OV 0.97 PT 0.96 ! SC 1.06 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.11 KP 1.00* LA 0.93 ! MK 1.01 NL 1.07 OV 0.94 PT 1.01 ! SC 0.95 ! ! ! Fit before self-cal, rms=0.087149Jy sigma=0.000877 ! Fit after self-cal, rms=0.086006Jy sigma=0.000869 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.144 mas, bmaj=7.38 mas, bpa=-2.09 degrees ! Estimated noise=574.233 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00107505 Jy ! Component: 100 - total flux cleaned = 0.0015116 Jy ! Component: 150 - total flux cleaned = 0.00152659 Jy ! Component: 200 - total flux cleaned = 0.00155364 Jy ! Total flux subtracted in 200 components = 0.00155364 Jy ! Clean residual min=-0.002613 max=0.002269 Jy/beam ! Clean residual mean=-0.000013 rms=0.000594 Jy/beam ! Combined flux in latest and established models = 0.0749333 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 22 components and 0.0749333 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085982Jy sigma=0.000869 ! Fit after self-cal, rms=0.085582Jy sigma=0.000868 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085582Jy sigma=0.000868 ! Fit after self-cal, rms=0.084610Jy sigma=0.000864 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.121 mas, bmaj=7.355 mas, bpa=-2.081 degrees ! Estimated noise=578.809 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00104942 Jy ! Component: 100 - total flux cleaned = 0.00154466 Jy ! Component: 150 - total flux cleaned = 0.00165322 Jy ! Component: 200 - total flux cleaned = 0.00169217 Jy ! Total flux subtracted in 200 components = 0.00169217 Jy ! Clean residual min=-0.002244 max=0.001961 Jy/beam ! Clean residual mean=-0.000011 rms=0.000536 Jy/beam ! Combined flux in latest and established models = 0.0766255 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 35 components and 0.0766255 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084593Jy sigma=0.000863 ! Fit after self-cal, rms=0.084445Jy sigma=0.000863 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.39965e-05 Jy ! Component: 100 - total flux cleaned = 0.000118285 Jy ! Component: 150 - total flux cleaned = 0.000118379 Jy ! Component: 200 - total flux cleaned = 0.000118224 Jy ! Total flux subtracted in 200 components = 0.000118224 Jy ! Clean residual min=-0.002337 max=0.002042 Jy/beam ! Clean residual mean=-0.000011 rms=0.000542 Jy/beam ! Combined flux in latest and established models = 0.0767437 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 36 components and 0.0767437 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084443Jy sigma=0.000863 ! Fit after self-cal, rms=0.084448Jy sigma=0.000863 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084448Jy sigma=0.000863 ! Fit after self-cal, rms=0.084320Jy sigma=0.000863 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.105 mas, bmaj=7.325 mas, bpa=-1.96 degrees ! Estimated noise=580.698 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000692669 Jy ! Component: 100 - total flux cleaned = 0.000981153 Jy ! Component: 150 - total flux cleaned = 0.000997793 Jy ! Component: 200 - total flux cleaned = 0.00100568 Jy ! Total flux subtracted in 200 components = 0.00100568 Jy ! Clean residual min=-0.002254 max=0.001927 Jy/beam ! Clean residual mean=-0.000012 rms=0.000525 Jy/beam ! Combined flux in latest and established models = 0.0777494 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 39 components and 0.0777494 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084311Jy sigma=0.000863 ! Fit after self-cal, rms=0.084316Jy sigma=0.000862 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.12609e-05 Jy ! Component: 100 - total flux cleaned = 1.09581e-05 Jy ! Component: 150 - total flux cleaned = 1.06827e-05 Jy ! Component: 200 - total flux cleaned = 1.72696e-05 Jy ! Total flux subtracted in 200 components = 1.72696e-05 Jy ! Clean residual min=-0.002288 max=0.001979 Jy/beam ! Clean residual mean=-0.000011 rms=0.000529 Jy/beam ! Combined flux in latest and established models = 0.0777667 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 42 components and 0.0777667 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084315Jy sigma=0.000862 ! Fit after self-cal, rms=0.084319Jy sigma=0.000862 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084319Jy sigma=0.000862 ! Fit after self-cal, rms=0.084473Jy sigma=0.000862 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.179 mas, bmaj=18.68 mas, bpa=8.856 degrees ! Estimated noise=722.953 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000831781 Jy ! Component: 100 - total flux cleaned = 0.00110202 Jy ! Component: 150 - total flux cleaned = 0.00113608 Jy ! Component: 200 - total flux cleaned = 0.00115862 Jy ! Total flux subtracted in 200 components = 0.00115862 Jy ! Clean residual min=-0.002690 max=0.002287 Jy/beam ! Clean residual mean=-0.000022 rms=0.000693 Jy/beam ! Combined flux in latest and established models = 0.0789253 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 49 components and 0.0789253 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084468Jy sigma=0.000862 ! Fit after self-cal, rms=0.084470Jy sigma=0.000862 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.72269e-05 Jy ! Component: 100 - total flux cleaned = 6.45892e-05 Jy ! Component: 150 - total flux cleaned = 8.42889e-05 Jy ! Component: 200 - total flux cleaned = 9.56774e-05 Jy ! Total flux subtracted in 200 components = 9.56774e-05 Jy ! Clean residual min=-0.002672 max=0.002266 Jy/beam ! Clean residual mean=-0.000022 rms=0.000692 Jy/beam ! Combined flux in latest and established models = 0.079021 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 50 components and 0.079021 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084472Jy sigma=0.000862 ! Fit after self-cal, rms=0.084469Jy sigma=0.000862 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.091 mas, bmaj=7.299 mas, bpa=-1.832 degrees ! Estimated noise=583.127 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.091 x 7.299 at -1.832 degrees (North through East) ! Clean map min=-0.0021537 max=0.070693 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.432 mas, bmaj=6.089 mas, bpa=-1.774 degrees ! Estimated noise=1010.84 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0561189 Jy ! Component: 100 - total flux cleaned = 0.0684796 Jy ! Component: 150 - total flux cleaned = 0.0722203 Jy ! Component: 200 - total flux cleaned = 0.0742239 Jy ! Total flux subtracted in 200 components = 0.0742239 Jy ! Clean residual min=-0.003819 max=0.003424 Jy/beam ! Clean residual mean=-0.000012 rms=0.000886 Jy/beam ! Combined flux in latest and established models = 0.0742239 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.0742239 Jy ! Inverting map and beam ! Estimated beam: bmin=3.091 mas, bmaj=7.299 mas, bpa=-1.832 degrees ! Estimated noise=583.127 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00244548 Jy ! Component: 100 - total flux cleaned = 0.00354036 Jy ! Component: 150 - total flux cleaned = 0.00378353 Jy ! Component: 200 - total flux cleaned = 0.0039148 Jy ! Total flux subtracted in 200 components = 0.0039148 Jy ! Clean residual min=-0.002308 max=0.001956 Jy/beam ! Clean residual mean=-0.000014 rms=0.000536 Jy/beam ! Combined flux in latest and established models = 0.0781387 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 26 components and 0.0781387 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.179 mas, bmaj=18.68 mas, bpa=8.856 degrees ! Estimated noise=722.953 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000452504 Jy ! Component: 100 - total flux cleaned = 0.000503204 Jy ! Component: 150 - total flux cleaned = 0.000546542 Jy ! Component: 200 - total flux cleaned = 0.000575076 Jy ! Total flux subtracted in 200 components = 0.000575076 Jy ! Clean residual min=-0.002704 max=0.002300 Jy/beam ! Clean residual mean=-0.000024 rms=0.000698 Jy/beam ! Combined flux in latest and established models = 0.0787138 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.34024e-05 Jy ! Component: 100 - total flux cleaned = 5.56456e-05 Jy ! Component: 150 - total flux cleaned = 8.19534e-05 Jy ! Component: 200 - total flux cleaned = 0.000100205 Jy ! Total flux subtracted in 200 components = 0.000100205 Jy ! Clean residual min=-0.002676 max=0.002273 Jy/beam ! Clean residual mean=-0.000023 rms=0.000695 Jy/beam ! Combined flux in latest and established models = 0.078814 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 34 components and 0.078814 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.091 mas, bmaj=7.299 mas, bpa=-1.832 degrees ! Estimated noise=583.127 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.02614e-05 Jy ! Component: 100 - total flux cleaned = -0.000130147 Jy ! Component: 150 - total flux cleaned = -0.000132224 Jy ! Component: 200 - total flux cleaned = -0.000119053 Jy ! Total flux subtracted in 200 components = -0.000119053 Jy ! Clean residual min=-0.002293 max=0.001979 Jy/beam ! Clean residual mean=-0.000012 rms=0.000531 Jy/beam ! Combined flux in latest and established models = 0.0786949 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 40 components and 0.0786949 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084472Jy sigma=0.000862 ! Fit after self-cal, rms=0.084467Jy sigma=0.000862 wmodel J1308-2458_S_2014_01_04_pus_map.mod ! Writing 40 model components to file: J1308-2458_S_2014_01_04_pus_map.mod wobs J1308-2458_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J1308-2458_S_2014_01_04_pus_uvs.fits wwins J1308-2458_S_2014_01_04_pus_map.win ! wwins: Wrote 1 windows to J1308-2458_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000775418 Jy ! Component: 100 - total flux cleaned = -0.00112885 Jy ! Component: 150 - total flux cleaned = -0.00138902 Jy ! Component: 200 - total flux cleaned = -0.00151101 Jy ! Component: 250 - total flux cleaned = -0.00159786 Jy ! Component: 300 - total flux cleaned = -0.00165364 Jy ! Component: 350 - total flux cleaned = -0.00168163 Jy ! Component: 400 - total flux cleaned = -0.00160372 Jy ! Component: 450 - total flux cleaned = -0.00150283 Jy ! Component: 500 - total flux cleaned = -0.00147851 Jy ! Component: 550 - total flux cleaned = -0.00152627 Jy ! Component: 600 - total flux cleaned = -0.00154911 Jy ! Component: 650 - total flux cleaned = -0.00154897 Jy ! Component: 700 - total flux cleaned = -0.0016155 Jy ! Component: 750 - total flux cleaned = -0.00159394 Jy ! Component: 800 - total flux cleaned = -0.001658 Jy ! Component: 850 - total flux cleaned = -0.00174161 Jy ! Component: 900 - total flux cleaned = -0.00178218 Jy ! Component: 950 - total flux cleaned = -0.00186201 Jy ! Component: 1000 - total flux cleaned = -0.00192043 Jy ! Component: 1050 - total flux cleaned = -0.00193945 Jy ! Component: 1100 - total flux cleaned = -0.0020152 Jy ! Component: 1150 - total flux cleaned = -0.00210789 Jy ! Component: 1200 - total flux cleaned = -0.00216234 Jy ! Component: 1250 - total flux cleaned = -0.0022157 Jy ! Component: 1300 - total flux cleaned = -0.00223384 Jy ! Component: 1350 - total flux cleaned = -0.00232058 Jy ! Component: 1400 - total flux cleaned = -0.00240549 Jy ! Component: 1450 - total flux cleaned = -0.0024385 Jy ! Component: 1500 - total flux cleaned = -0.0024877 Jy ! Component: 1550 - total flux cleaned = -0.00255208 Jy ! Component: 1600 - total flux cleaned = -0.0025679 Jy ! Component: 1650 - total flux cleaned = -0.00266206 Jy ! Component: 1700 - total flux cleaned = -0.00267742 Jy ! Component: 1750 - total flux cleaned = -0.00276906 Jy ! Component: 1800 - total flux cleaned = -0.00279915 Jy ! Component: 1850 - total flux cleaned = -0.00285878 Jy ! Component: 1900 - total flux cleaned = -0.00291733 Jy ! Component: 1950 - total flux cleaned = -0.00294615 Jy ! Component: 2000 - total flux cleaned = -0.00297466 Jy ! Component: 2050 - total flux cleaned = -0.00304506 Jy ! Component: 2100 - total flux cleaned = -0.00314224 Jy ! Component: 2150 - total flux cleaned = -0.00310109 Jy ! Component: 2200 - total flux cleaned = -0.00318256 Jy ! Component: 2250 - total flux cleaned = -0.00319603 Jy ! Component: 2300 - total flux cleaned = -0.00324908 Jy ! Component: 2350 - total flux cleaned = -0.00326204 Jy ! Component: 2400 - total flux cleaned = -0.00326209 Jy ! Component: 2450 - total flux cleaned = -0.00330031 Jy ! Component: 2500 - total flux cleaned = -0.00327478 Jy ! Component: 2550 - total flux cleaned = -0.00328715 Jy ! Component: 2600 - total flux cleaned = -0.00328715 Jy ! Component: 2650 - total flux cleaned = -0.00329924 Jy ! Component: 2700 - total flux cleaned = -0.00328713 Jy ! Component: 2750 - total flux cleaned = -0.0032992 Jy ! Component: 2800 - total flux cleaned = -0.0033111 Jy ! Component: 2850 - total flux cleaned = -0.00328755 Jy ! Component: 2900 - total flux cleaned = -0.00331074 Jy ! Component: 2950 - total flux cleaned = -0.0032761 Jy ! Component: 3000 - total flux cleaned = -0.00324186 Jy ! Component: 3050 - total flux cleaned = -0.00328726 Jy ! Component: 3100 - total flux cleaned = -0.00321994 Jy ! Component: 3150 - total flux cleaned = -0.00319788 Jy ! Component: 3200 - total flux cleaned = -0.0031979 Jy ! Component: 3250 - total flux cleaned = -0.0031541 Jy ! Component: 3300 - total flux cleaned = -0.0031325 Jy ! Component: 3350 - total flux cleaned = -0.00310029 Jy ! Component: 3400 - total flux cleaned = -0.003079 Jy ! Component: 3450 - total flux cleaned = -0.00307902 Jy ! Component: 3500 - total flux cleaned = -0.00307904 Jy ! Component: 3550 - total flux cleaned = -0.00303725 Jy ! Component: 3600 - total flux cleaned = -0.00304763 Jy ! Component: 3650 - total flux cleaned = -0.00303725 Jy ! Component: 3700 - total flux cleaned = -0.00299628 Jy ! Component: 3750 - total flux cleaned = -0.00296583 Jy ! Component: 3800 - total flux cleaned = -0.00296585 Jy ! Component: 3850 - total flux cleaned = -0.00293589 Jy ! Component: 3900 - total flux cleaned = -0.00294577 Jy ! Component: 3950 - total flux cleaned = -0.00290633 Jy ! Component: 4000 - total flux cleaned = -0.00291601 Jy ! Component: 4050 - total flux cleaned = -0.00287719 Jy ! Total flux subtracted in 4096 components = -0.00285796 Jy ! Clean residual min=-0.000613 max=0.000647 Jy/beam ! Clean residual mean=0.000000 rms=0.000169 Jy/beam ! Combined flux in latest and established models = 0.0758369 Jy keep ! Adding 286 model components to the UV plane model. ! The established model now contains 326 components and 0.0758369 Jy ![Exited script file: muppet] wmap "J1308-2458_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.091 x 7.299 at -1.832 degrees (North through East) ! Clean map min=-0.0011296 max=0.071066 Jy/beam ! Writing clean map to FITS file: J1308-2458_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0710658 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000169229 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.714391 0.714391 1.42878 2.85756 5.71513 11.4303 22.8605 45.721 91.442 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.071 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.091 x 7.299 at -1.832 degrees (North through East) ! Clean map min=-0.0011296 max=0.071066 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1308-2458_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:27:54 2017