! Started logfile: J1305-3132_S_2015_01_22_pus_uvs.log on Tue Jan 3 22:53:21 2017 obs J1305-3132_S_2015_01_22_pus_uva.fits ! Reading UV FITS file: J1305-3132_S_2015_01_22_pus_uva.fits ! AN table 1: 63 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.791534 visibilities/baseline/integration-bin. ! Found source: J1305-3132 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 281 lines of history. ! ! Reading 8976 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1305-3132_S_2015_01_22_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 66 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 66 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 66 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 66 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.972853Jy sigma=0.008254 ! Fit after self-cal, rms=0.926897Jy sigma=0.007913 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.164 mas, bmaj=6.445 mas, bpa=-2.37 degrees ! Estimated noise=1582.22 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0596149 Jy ! Component: 100 - total flux cleaned = 0.0729151 Jy ! Total flux subtracted in 100 components = 0.0729151 Jy ! Clean residual min=-0.006014 max=0.005724 Jy/beam ! Clean residual mean=-0.000002 rms=0.001717 Jy/beam ! Combined flux in latest and established models = 0.0729151 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0729151 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099891Jy sigma=0.000775 ! Fit after self-cal, rms=0.099605Jy sigma=0.000773 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.744 mas, bmaj=7.673 mas, bpa=-3.251 degrees ! Estimated noise=892.499 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00623516 Jy ! Component: 100 - total flux cleaned = 0.00900101 Jy ! Component: 150 - total flux cleaned = 0.0103394 Jy ! Component: 200 - total flux cleaned = 0.0105479 Jy ! Total flux subtracted in 200 components = 0.0105479 Jy ! Clean residual min=-0.003308 max=0.004692 Jy/beam ! Clean residual mean=-0.000018 rms=0.001016 Jy/beam ! Combined flux in latest and established models = 0.083463 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 29 components and 0.083463 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099238Jy sigma=0.000770 ! Fit after self-cal, rms=0.099212Jy sigma=0.000770 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.00* HN 1.07 KP 1.09 ! LA 1.08 MK 0.95 NL 1.09 OV 0.96 ! PT 1.04 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00* HN 1.22 KP 0.96 ! LA 1.00 MK 1.02 NL 1.13 OV 0.96 ! PT 1.01 SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.00* HN 1.13 KP 0.88 ! LA 0.75 MK 1.01 NL 1.27 OV 0.94 ! PT 1.00 SC 0.97 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.00* HN 1.19 KP 0.81 ! LA 0.81 MK 1.00 NL 1.05 OV 0.95 ! PT 1.03 SC 0.98 ! ! ! Fit before self-cal, rms=0.099212Jy sigma=0.000770 ! Fit after self-cal, rms=0.101176Jy sigma=0.000765 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.762 mas, bmaj=7.647 mas, bpa=-2.959 degrees ! Estimated noise=889.227 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.0876e-05 Jy ! Component: 100 - total flux cleaned = 5.92434e-05 Jy ! Component: 150 - total flux cleaned = 7.20709e-05 Jy ! Component: 200 - total flux cleaned = 8.45522e-05 Jy ! Total flux subtracted in 200 components = 8.45522e-05 Jy ! Clean residual min=-0.002284 max=0.003211 Jy/beam ! Clean residual mean=-0.000018 rms=0.000670 Jy/beam ! Combined flux in latest and established models = 0.0835475 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 35 components and 0.0835475 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101170Jy sigma=0.000765 ! Fit after self-cal, rms=0.101365Jy sigma=0.000764 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101365Jy sigma=0.000764 ! Fit after self-cal, rms=0.102449Jy sigma=0.000764 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.764 mas, bmaj=7.647 mas, bpa=-2.908 degrees ! Estimated noise=892.819 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000268555 Jy ! Component: 100 - total flux cleaned = 0.000289495 Jy ! Component: 150 - total flux cleaned = 0.000308477 Jy ! Component: 200 - total flux cleaned = 0.000317687 Jy ! Total flux subtracted in 200 components = 0.000317687 Jy ! Clean residual min=-0.002359 max=0.003017 Jy/beam ! Clean residual mean=-0.000018 rms=0.000665 Jy/beam ! Combined flux in latest and established models = 0.0838652 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 38 components and 0.0838652 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102446Jy sigma=0.000764 ! Fit after self-cal, rms=0.102473Jy sigma=0.000764 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.5, -111.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00211971 Jy ! Component: 100 - total flux cleaned = 0.00232903 Jy ! Component: 150 - total flux cleaned = 0.00236478 Jy ! Component: 200 - total flux cleaned = 0.0024234 Jy ! Total flux subtracted in 200 components = 0.0024234 Jy ! Clean residual min=-0.002083 max=0.002443 Jy/beam ! Clean residual mean=-0.000017 rms=0.000580 Jy/beam ! Combined flux in latest and established models = 0.0862886 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 54 components and 0.0862886 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102414Jy sigma=0.000763 ! Fit after self-cal, rms=0.102398Jy sigma=0.000763 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102398Jy sigma=0.000763 ! Fit after self-cal, rms=0.102410Jy sigma=0.000763 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.761 mas, bmaj=7.638 mas, bpa=-2.856 degrees ! Estimated noise=891.18 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00046542 Jy ! Component: 100 - total flux cleaned = 0.000521702 Jy ! Component: 150 - total flux cleaned = 0.000546889 Jy ! Component: 200 - total flux cleaned = 0.000570093 Jy ! Total flux subtracted in 200 components = 0.000570093 Jy ! Clean residual min=-0.002080 max=0.002463 Jy/beam ! Clean residual mean=-0.000018 rms=0.000568 Jy/beam ! Combined flux in latest and established models = 0.0868587 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 60 components and 0.0868587 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102391Jy sigma=0.000763 ! Fit after self-cal, rms=0.102396Jy sigma=0.000763 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (68.5, -118.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00153159 Jy ! Component: 100 - total flux cleaned = 0.0018937 Jy ! Component: 150 - total flux cleaned = 0.00207765 Jy ! Component: 200 - total flux cleaned = 0.0023025 Jy ! Total flux subtracted in 200 components = 0.0023025 Jy ! Clean residual min=-0.002035 max=0.002094 Jy/beam ! Clean residual mean=-0.000013 rms=0.000522 Jy/beam ! Combined flux in latest and established models = 0.0891612 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 79 components and 0.0891612 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102344Jy sigma=0.000763 ! Fit after self-cal, rms=0.102335Jy sigma=0.000763 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102335Jy sigma=0.000763 ! Fit after self-cal, rms=0.102131Jy sigma=0.000763 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.506 mas, bmaj=20.64 mas, bpa=1.898 degrees ! Estimated noise=1165.61 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000922138 Jy ! Component: 100 - total flux cleaned = 0.00122413 Jy ! Component: 150 - total flux cleaned = 0.00133304 Jy ! Component: 200 - total flux cleaned = 0.00144529 Jy ! Total flux subtracted in 200 components = 0.00144529 Jy ! Clean residual min=-0.001559 max=0.002290 Jy/beam ! Clean residual mean=-0.000022 rms=0.000523 Jy/beam ! Combined flux in latest and established models = 0.0906065 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 91 components and 0.0906065 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102125Jy sigma=0.000763 ! Fit after self-cal, rms=0.102121Jy sigma=0.000763 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-115, 0.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00126185 Jy ! Component: 100 - total flux cleaned = 0.00114183 Jy ! Component: 150 - total flux cleaned = 0.00107575 Jy ! Component: 200 - total flux cleaned = 0.00101667 Jy ! Total flux subtracted in 200 components = 0.00101667 Jy ! Clean residual min=-0.001452 max=0.001668 Jy/beam ! Clean residual mean=-0.000022 rms=0.000410 Jy/beam ! Combined flux in latest and established models = 0.0916232 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 110 components and 0.0916232 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102081Jy sigma=0.000762 ! Fit after self-cal, rms=0.102052Jy sigma=0.000762 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.763 mas, bmaj=7.641 mas, bpa=-2.783 degrees ! Estimated noise=889.05 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.763 x 7.641 at -2.783 degrees (North through East) ! Clean map min=-0.0020226 max=0.077682 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.163 mas, bmaj=6.388 mas, bpa=-1.86 degrees ! Estimated noise=1580.47 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0594835 Jy ! Component: 100 - total flux cleaned = 0.0733281 Jy ! Component: 150 - total flux cleaned = 0.0779212 Jy ! Component: 200 - total flux cleaned = 0.0798816 Jy ! Total flux subtracted in 200 components = 0.0798816 Jy ! Clean residual min=-0.004290 max=0.004533 Jy/beam ! Clean residual mean=-0.000006 rms=0.001324 Jy/beam ! Combined flux in latest and established models = 0.0798816 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.0798816 Jy ! Inverting map and beam ! Estimated beam: bmin=2.763 mas, bmaj=7.641 mas, bpa=-2.783 degrees ! Estimated noise=889.05 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2, 4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0044129 Jy ! Component: 100 - total flux cleaned = 0.00599694 Jy ! Component: 150 - total flux cleaned = 0.00746511 Jy ! Component: 200 - total flux cleaned = 0.00857181 Jy ! Total flux subtracted in 200 components = 0.00857181 Jy ! Clean residual min=-0.002229 max=0.002190 Jy/beam ! Clean residual mean=-0.000015 rms=0.000583 Jy/beam ! Combined flux in latest and established models = 0.0884534 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 60 components and 0.0884534 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.506 mas, bmaj=20.64 mas, bpa=1.898 degrees ! Estimated noise=1165.61 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00216956 Jy ! Component: 100 - total flux cleaned = 0.00294514 Jy ! Component: 150 - total flux cleaned = 0.00362872 Jy ! Component: 200 - total flux cleaned = 0.00403457 Jy ! Total flux subtracted in 200 components = 0.00403457 Jy ! Clean residual min=-0.001682 max=0.001784 Jy/beam ! Clean residual mean=-0.000023 rms=0.000504 Jy/beam ! Combined flux in latest and established models = 0.092488 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000118987 Jy ! Component: 100 - total flux cleaned = 0.000189156 Jy ! Component: 150 - total flux cleaned = 0.000220739 Jy ! Component: 200 - total flux cleaned = 0.000135203 Jy ! Total flux subtracted in 200 components = 0.000135203 Jy ! Clean residual min=-0.001519 max=0.001630 Jy/beam ! Clean residual mean=-0.000016 rms=0.000443 Jy/beam ! Combined flux in latest and established models = 0.0926232 Jy ! Adding 57 model components to the UV plane model. ! The established model now contains 113 components and 0.0926232 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.763 mas, bmaj=7.641 mas, bpa=-2.783 degrees ! Estimated noise=889.05 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000449633 Jy ! Component: 100 - total flux cleaned = -0.000400491 Jy ! Component: 150 - total flux cleaned = -0.000211455 Jy ! Component: 200 - total flux cleaned = -0.000125141 Jy ! Total flux subtracted in 200 components = -0.000125141 Jy ! Clean residual min=-0.001644 max=0.001909 Jy/beam ! Clean residual mean=-0.000006 rms=0.000455 Jy/beam ! Combined flux in latest and established models = 0.092498 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 147 components and 0.092498 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102004Jy sigma=0.000762 ! Fit after self-cal, rms=0.101992Jy sigma=0.000762 wmodel J1305-3132_S_2015_01_22_pus_map.mod ! Writing 147 model components to file: J1305-3132_S_2015_01_22_pus_map.mod wobs J1305-3132_S_2015_01_22_pus_uvs.fits ! Writing UV FITS file: J1305-3132_S_2015_01_22_pus_uvs.fits wwins J1305-3132_S_2015_01_22_pus_map.win ! wwins: Wrote 5 windows to J1305-3132_S_2015_01_22_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000634369 Jy ! Component: 100 - total flux cleaned = 0.000547094 Jy ! Component: 150 - total flux cleaned = 0.000376497 Jy ! Component: 200 - total flux cleaned = 0.000293874 Jy ! Component: 250 - total flux cleaned = 0.000240931 Jy ! Component: 300 - total flux cleaned = 0.000164229 Jy ! Component: 350 - total flux cleaned = 1.66809e-05 Jy ! Component: 400 - total flux cleaned = -0.000174375 Jy ! Component: 450 - total flux cleaned = -0.000337327 Jy ! Component: 500 - total flux cleaned = -0.000474588 Jy ! Component: 550 - total flux cleaned = -0.000741449 Jy ! Component: 600 - total flux cleaned = -0.000893397 Jy ! Component: 650 - total flux cleaned = -0.00116981 Jy ! Component: 700 - total flux cleaned = -0.00137854 Jy ! Component: 750 - total flux cleaned = -0.0016243 Jy ! Component: 800 - total flux cleaned = -0.00188521 Jy ! Component: 850 - total flux cleaned = -0.00210166 Jy ! Component: 900 - total flux cleaned = -0.00233349 Jy ! Component: 950 - total flux cleaned = -0.00248537 Jy ! Component: 1000 - total flux cleaned = -0.00265303 Jy ! Component: 1050 - total flux cleaned = -0.00283637 Jy ! Component: 1100 - total flux cleaned = -0.00299859 Jy ! Component: 1150 - total flux cleaned = -0.00299887 Jy ! Component: 1200 - total flux cleaned = -0.00308651 Jy ! Component: 1250 - total flux cleaned = -0.00313808 Jy ! Component: 1300 - total flux cleaned = -0.00315484 Jy ! Component: 1350 - total flux cleaned = -0.00317168 Jy ! Component: 1400 - total flux cleaned = -0.00320481 Jy ! Component: 1450 - total flux cleaned = -0.00325374 Jy ! Component: 1500 - total flux cleaned = -0.00330227 Jy ! Component: 1550 - total flux cleaned = -0.00333412 Jy ! Component: 1600 - total flux cleaned = -0.00338132 Jy ! Component: 1650 - total flux cleaned = -0.0034591 Jy ! Component: 1700 - total flux cleaned = -0.00348984 Jy ! Component: 1750 - total flux cleaned = -0.00348992 Jy ! Component: 1800 - total flux cleaned = -0.00356522 Jy ! Component: 1850 - total flux cleaned = -0.00363931 Jy ! Component: 1900 - total flux cleaned = -0.00365386 Jy ! Component: 1950 - total flux cleaned = -0.00371167 Jy ! Component: 2000 - total flux cleaned = -0.00371148 Jy ! Component: 2050 - total flux cleaned = -0.0037398 Jy ! Component: 2100 - total flux cleaned = -0.00378178 Jy ! Component: 2150 - total flux cleaned = -0.00376786 Jy ! Component: 2200 - total flux cleaned = -0.003864 Jy ! Component: 2250 - total flux cleaned = -0.00389098 Jy ! Component: 2300 - total flux cleaned = -0.00394481 Jy ! Component: 2350 - total flux cleaned = -0.00403822 Jy ! Component: 2400 - total flux cleaned = -0.00407798 Jy ! Component: 2450 - total flux cleaned = -0.0041436 Jy ! Component: 2500 - total flux cleaned = -0.00424768 Jy ! Component: 2550 - total flux cleaned = -0.00428636 Jy ! Component: 2600 - total flux cleaned = -0.00437581 Jy ! Component: 2650 - total flux cleaned = -0.00443933 Jy ! Component: 2700 - total flux cleaned = -0.00448971 Jy ! Component: 2750 - total flux cleaned = -0.00452726 Jy ! Component: 2800 - total flux cleaned = -0.0046266 Jy ! Component: 2850 - total flux cleaned = -0.00470054 Jy ! Component: 2900 - total flux cleaned = -0.0047251 Jy ! Component: 2950 - total flux cleaned = -0.00473729 Jy ! Component: 3000 - total flux cleaned = -0.00479761 Jy ! Component: 3050 - total flux cleaned = -0.00485758 Jy ! Component: 3100 - total flux cleaned = -0.00490518 Jy ! Component: 3150 - total flux cleaned = -0.00495253 Jy ! Component: 3200 - total flux cleaned = -0.0049879 Jy ! Component: 3250 - total flux cleaned = -0.0050697 Jy ! Component: 3300 - total flux cleaned = -0.00512763 Jy ! Component: 3350 - total flux cleaned = -0.00512752 Jy ! Component: 3400 - total flux cleaned = -0.00520785 Jy ! Component: 3450 - total flux cleaned = -0.00526482 Jy ! Component: 3500 - total flux cleaned = -0.0053442 Jy ! Component: 3550 - total flux cleaned = -0.00540067 Jy ! Component: 3600 - total flux cleaned = -0.00547906 Jy ! Component: 3650 - total flux cleaned = -0.00550149 Jy ! Component: 3700 - total flux cleaned = -0.00556814 Jy ! Component: 3750 - total flux cleaned = -0.0056566 Jy ! Component: 3800 - total flux cleaned = -0.00568963 Jy ! Component: 3850 - total flux cleaned = -0.00575543 Jy ! Component: 3900 - total flux cleaned = -0.00582097 Jy ! Component: 3950 - total flux cleaned = -0.00585362 Jy ! Component: 4000 - total flux cleaned = -0.00592951 Jy ! Component: 4050 - total flux cleaned = -0.0059944 Jy ! Total flux subtracted in 4096 components = -0.00602675 Jy ! Clean residual min=-0.000677 max=0.000770 Jy/beam ! Clean residual mean=-0.000001 rms=0.000186 Jy/beam ! Combined flux in latest and established models = 0.0864713 Jy keep ! Adding 257 model components to the UV plane model. ! The established model now contains 404 components and 0.0864713 Jy ![Exited script file: muppet] wmap "J1305-3132_S_2015_01_22_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.763 x 7.641 at -2.783 degrees (North through East) ! Clean map min=-0.0016008 max=0.077577 Jy/beam ! Writing clean map to FITS file: J1305-3132_S_2015_01_22_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0775775 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000183685 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.710331 0.710331 1.42066 2.84132 5.68264 11.3653 22.7306 45.4612 90.9223 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.077 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.763 x 7.641 at -2.783 degrees (North through East) ! Clean map min=-0.0016008 max=0.077577 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1305-3132_S_2015_01_22_pus_uvs.log closed on Tue Jan 3 22:53:28 2017