! Started logfile: J1302+5748_S_2015_03_17_pus_uvs.log on Fri Dec 30 22:59:05 2016 obs J1302+5748_S_2015_03_17_pus_uva.fits ! Reading UV FITS file: J1302+5748_S_2015_03_17_pus_uva.fits ! AN table 1: 15 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.903704 visibilities/baseline/integration-bin. ! Found source: J1302+5748 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 330 lines of history. ! ! Reading 2440 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1302+5748_S_2015_03_17_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.704205Jy sigma=0.008355 ! Fit after self-cal, rms=0.698985Jy sigma=0.008295 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.663 mas, bmaj=9.475 mas, bpa=37.31 degrees ! Estimated noise=1567.26 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.22977 Jy ! Component: 100 - total flux cleaned = 0.283955 Jy ! Total flux subtracted in 100 components = 0.283955 Jy ! Clean residual min=-0.013641 max=0.021496 Jy/beam ! Clean residual mean=-0.000099 rms=0.004234 Jy/beam ! Combined flux in latest and established models = 0.283955 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.283955 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094066Jy sigma=0.000995 ! Fit after self-cal, rms=0.094040Jy sigma=0.000995 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.137 mas, bmaj=9.74 mas, bpa=37.39 degrees ! Estimated noise=1239.47 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0277178 Jy ! Component: 100 - total flux cleaned = 0.0424255 Jy ! Component: 150 - total flux cleaned = 0.0524234 Jy ! Component: 200 - total flux cleaned = 0.0593717 Jy ! Total flux subtracted in 200 components = 0.0593717 Jy ! Clean residual min=-0.012713 max=0.013119 Jy/beam ! Clean residual mean=-0.000045 rms=0.002962 Jy/beam ! Combined flux in latest and established models = 0.343327 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 33 components and 0.343327 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083416Jy sigma=0.000904 ! Fit after self-cal, rms=0.083370Jy sigma=0.000903 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.86 HN 0.94 KP 1.13 ! LA 0.94 MK 1.10 NL 0.86 OV 0.97 ! PT 1.11 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.88 HN 1.01 KP 1.07 ! LA 0.94 MK 1.09 NL 1.00 OV 1.00 ! PT 1.15 SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.90 HN 1.02 KP 0.96 ! LA 0.78 MK 1.16 NL 1.13 OV 0.92 ! PT 1.09 SC 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 0.91 HN 0.96 KP 0.93 ! LA 0.83 MK 1.15 NL 1.00 OV 0.99 ! PT 1.13 SC 0.93 ! ! ! Fit before self-cal, rms=0.083370Jy sigma=0.000903 ! Fit after self-cal, rms=0.069506Jy sigma=0.000783 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.183 mas, bmaj=9.699 mas, bpa=37.34 degrees ! Estimated noise=1230.23 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000978699 Jy ! Component: 100 - total flux cleaned = 0.00124453 Jy ! Component: 150 - total flux cleaned = 0.00137739 Jy ! Component: 200 - total flux cleaned = 0.00137302 Jy ! Total flux subtracted in 200 components = 0.00137302 Jy ! Clean residual min=-0.003553 max=0.003876 Jy/beam ! Clean residual mean=0.000004 rms=0.001006 Jy/beam ! Combined flux in latest and established models = 0.3447 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 65 components and 0.3447 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069315Jy sigma=0.000781 ! Fit after self-cal, rms=0.069298Jy sigma=0.000780 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069298Jy sigma=0.000780 ! Fit after self-cal, rms=0.069393Jy sigma=0.000780 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.192 mas, bmaj=9.681 mas, bpa=37.3 degrees ! Estimated noise=1230.57 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000365426 Jy ! Component: 100 - total flux cleaned = -0.000427644 Jy ! Component: 150 - total flux cleaned = -0.000523269 Jy ! Component: 200 - total flux cleaned = -0.000609978 Jy ! Total flux subtracted in 200 components = -0.000609978 Jy ! Clean residual min=-0.003591 max=0.003586 Jy/beam ! Clean residual mean=0.000002 rms=0.000958 Jy/beam ! Combined flux in latest and established models = 0.34409 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 75 components and 0.34409 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069306Jy sigma=0.000779 ! Fit after self-cal, rms=0.069306Jy sigma=0.000779 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.87459e-05 Jy ! Component: 100 - total flux cleaned = -0.000189796 Jy ! Component: 150 - total flux cleaned = -0.000291361 Jy ! Component: 200 - total flux cleaned = -0.000354905 Jy ! Total flux subtracted in 200 components = -0.000354905 Jy ! Clean residual min=-0.003692 max=0.003574 Jy/beam ! Clean residual mean=0.000001 rms=0.000944 Jy/beam ! Combined flux in latest and established models = 0.343735 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 84 components and 0.343735 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069270Jy sigma=0.000779 ! Fit after self-cal, rms=0.069270Jy sigma=0.000779 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069270Jy sigma=0.000779 ! Fit after self-cal, rms=0.069360Jy sigma=0.000778 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.202 mas, bmaj=9.67 mas, bpa=37.27 degrees ! Estimated noise=1231.08 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00095985 Jy ! Component: 100 - total flux cleaned = -0.00115353 Jy ! Component: 150 - total flux cleaned = -0.00132284 Jy ! Component: 200 - total flux cleaned = -0.0014147 Jy ! Total flux subtracted in 200 components = -0.0014147 Jy ! Clean residual min=-0.003667 max=0.003405 Jy/beam ! Clean residual mean=0.000000 rms=0.000917 Jy/beam ! Combined flux in latest and established models = 0.34232 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 94 components and 0.34232 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069315Jy sigma=0.000778 ! Fit after self-cal, rms=0.069317Jy sigma=0.000778 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.48117e-05 Jy ! Component: 100 - total flux cleaned = -7.94262e-05 Jy ! Component: 150 - total flux cleaned = -0.000104535 Jy ! Component: 200 - total flux cleaned = -7.9893e-05 Jy ! Total flux subtracted in 200 components = -7.9893e-05 Jy ! Clean residual min=-0.003718 max=0.003399 Jy/beam ! Clean residual mean=0.000000 rms=0.000911 Jy/beam ! Combined flux in latest and established models = 0.34224 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 102 components and 0.34224 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069297Jy sigma=0.000778 ! Fit after self-cal, rms=0.069298Jy sigma=0.000778 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069298Jy sigma=0.000778 ! Fit after self-cal, rms=0.069356Jy sigma=0.000778 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.733 mas, bmaj=10.54 mas, bpa=35.57 degrees ! Estimated noise=1583.57 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00127143 Jy ! Component: 100 - total flux cleaned = -0.0017849 Jy ! Component: 150 - total flux cleaned = -0.00215811 Jy ! Component: 200 - total flux cleaned = -0.00248889 Jy ! Total flux subtracted in 200 components = -0.00248889 Jy ! Clean residual min=-0.003201 max=0.003955 Jy/beam ! Clean residual mean=-0.000005 rms=0.001000 Jy/beam ! Combined flux in latest and established models = 0.339751 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 106 components and 0.339751 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069340Jy sigma=0.000778 ! Fit after self-cal, rms=0.069341Jy sigma=0.000778 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.23206e-05 Jy ! Component: 100 - total flux cleaned = -0.000260283 Jy ! Component: 150 - total flux cleaned = -0.000351968 Jy ! Component: 200 - total flux cleaned = -0.000432538 Jy ! Total flux subtracted in 200 components = -0.000432538 Jy ! Clean residual min=-0.003296 max=0.003808 Jy/beam ! Clean residual mean=-0.000008 rms=0.000988 Jy/beam ! Combined flux in latest and established models = 0.339319 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 108 components and 0.339319 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069342Jy sigma=0.000778 ! Fit after self-cal, rms=0.069341Jy sigma=0.000778 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.21 mas, bmaj=9.665 mas, bpa=37.24 degrees ! Estimated noise=1231.43 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.21 x 9.665 at 37.24 degrees (North through East) ! Clean map min=-0.0033701 max=0.29693 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.718 mas, bmaj=9.381 mas, bpa=37.22 degrees ! Estimated noise=1565.54 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.229497 Jy ! Component: 100 - total flux cleaned = 0.281437 Jy ! Component: 150 - total flux cleaned = 0.301519 Jy ! Component: 200 - total flux cleaned = 0.311345 Jy ! Total flux subtracted in 200 components = 0.311345 Jy ! Clean residual min=-0.005349 max=0.005876 Jy/beam ! Clean residual mean=-0.000038 rms=0.001483 Jy/beam ! Combined flux in latest and established models = 0.311345 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.311345 Jy ! Inverting map and beam ! Estimated beam: bmin=3.21 mas, bmaj=9.665 mas, bpa=37.24 degrees ! Estimated noise=1231.43 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00784872 Jy ! Component: 100 - total flux cleaned = 0.0130914 Jy ! Component: 150 - total flux cleaned = 0.0169703 Jy ! Component: 200 - total flux cleaned = 0.0198954 Jy ! Total flux subtracted in 200 components = 0.0198954 Jy ! Clean residual min=-0.003707 max=0.003771 Jy/beam ! Clean residual mean=-0.000027 rms=0.000976 Jy/beam ! Combined flux in latest and established models = 0.331241 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 60 components and 0.331241 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.733 mas, bmaj=10.54 mas, bpa=35.57 degrees ! Estimated noise=1583.57 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00405128 Jy ! Component: 100 - total flux cleaned = 0.0061975 Jy ! Component: 150 - total flux cleaned = 0.00666911 Jy ! Component: 200 - total flux cleaned = 0.00708202 Jy ! Total flux subtracted in 200 components = 0.00708202 Jy ! Clean residual min=-0.003439 max=0.003932 Jy/beam ! Clean residual mean=-0.000014 rms=0.001028 Jy/beam ! Combined flux in latest and established models = 0.338323 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000289587 Jy ! Component: 100 - total flux cleaned = 0.000382682 Jy ! Component: 150 - total flux cleaned = 0.000465722 Jy ! Component: 200 - total flux cleaned = 0.000515963 Jy ! Total flux subtracted in 200 components = 0.000515963 Jy ! Clean residual min=-0.003398 max=0.003880 Jy/beam ! Clean residual mean=-0.000011 rms=0.001009 Jy/beam ! Combined flux in latest and established models = 0.338839 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 99 components and 0.338839 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.21 mas, bmaj=9.665 mas, bpa=37.24 degrees ! Estimated noise=1231.43 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.22107e-05 Jy ! Component: 100 - total flux cleaned = 0.000174604 Jy ! Component: 150 - total flux cleaned = 0.000284771 Jy ! Component: 200 - total flux cleaned = 0.000412196 Jy ! Total flux subtracted in 200 components = 0.000412196 Jy ! Clean residual min=-0.003792 max=0.003342 Jy/beam ! Clean residual mean=-0.000004 rms=0.000886 Jy/beam ! Combined flux in latest and established models = 0.339251 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 112 components and 0.339251 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069313Jy sigma=0.000777 ! Fit after self-cal, rms=0.069309Jy sigma=0.000777 wmodel J1302+5748_S_2015_03_17_pus_map.mod ! Writing 112 model components to file: J1302+5748_S_2015_03_17_pus_map.mod wobs J1302+5748_S_2015_03_17_pus_uvs.fits ! Writing UV FITS file: J1302+5748_S_2015_03_17_pus_uvs.fits wwins J1302+5748_S_2015_03_17_pus_map.win ! wwins: Wrote 1 windows to J1302+5748_S_2015_03_17_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000126085 Jy ! Component: 100 - total flux cleaned = 0.000108245 Jy ! Component: 150 - total flux cleaned = 0.00027338 Jy ! Component: 200 - total flux cleaned = 0.000274792 Jy ! Component: 250 - total flux cleaned = 0.00032521 Jy ! Component: 300 - total flux cleaned = 0.000324757 Jy ! Component: 350 - total flux cleaned = 0.000370032 Jy ! Component: 400 - total flux cleaned = 0.000503402 Jy ! Component: 450 - total flux cleaned = 0.000545891 Jy ! Component: 500 - total flux cleaned = 0.000588141 Jy ! Component: 550 - total flux cleaned = 0.000671046 Jy ! Component: 600 - total flux cleaned = 0.000751037 Jy ! Component: 650 - total flux cleaned = 0.000750645 Jy ! Component: 700 - total flux cleaned = 0.000674565 Jy ! Component: 750 - total flux cleaned = 0.000712115 Jy ! Component: 800 - total flux cleaned = 0.000712236 Jy ! Component: 850 - total flux cleaned = 0.000747423 Jy ! Component: 900 - total flux cleaned = 0.000643493 Jy ! Component: 950 - total flux cleaned = 0.000745409 Jy ! Component: 1000 - total flux cleaned = 0.00067863 Jy ! Component: 1050 - total flux cleaned = 0.000744962 Jy ! Component: 1100 - total flux cleaned = 0.000809209 Jy ! Component: 1150 - total flux cleaned = 0.000966826 Jy ! Component: 1200 - total flux cleaned = 0.00102813 Jy ! Component: 1250 - total flux cleaned = 0.00102808 Jy ! Component: 1300 - total flux cleaned = 0.00108803 Jy ! Component: 1350 - total flux cleaned = 0.00114705 Jy ! Component: 1400 - total flux cleaned = 0.00123364 Jy ! Component: 1450 - total flux cleaned = 0.0012621 Jy ! Component: 1500 - total flux cleaned = 0.00131804 Jy ! Component: 1550 - total flux cleaned = 0.00140049 Jy ! Component: 1600 - total flux cleaned = 0.00145457 Jy ! Component: 1650 - total flux cleaned = 0.00145451 Jy ! Component: 1700 - total flux cleaned = 0.00142848 Jy ! Component: 1750 - total flux cleaned = 0.00148064 Jy ! Component: 1800 - total flux cleaned = 0.00158284 Jy ! Component: 1850 - total flux cleaned = 0.00155745 Jy ! Component: 1900 - total flux cleaned = 0.00160712 Jy ! Component: 1950 - total flux cleaned = 0.00155818 Jy ! Component: 2000 - total flux cleaned = 0.00163094 Jy ! Component: 2050 - total flux cleaned = 0.00163108 Jy ! Component: 2100 - total flux cleaned = 0.00167836 Jy ! Component: 2150 - total flux cleaned = 0.0016323 Jy ! Component: 2200 - total flux cleaned = 0.00163287 Jy ! Component: 2250 - total flux cleaned = 0.00167826 Jy ! Component: 2300 - total flux cleaned = 0.00161119 Jy ! Component: 2350 - total flux cleaned = 0.00172231 Jy ! Component: 2400 - total flux cleaned = 0.00170037 Jy ! Component: 2450 - total flux cleaned = 0.00176525 Jy ! Component: 2500 - total flux cleaned = 0.00176516 Jy ! Component: 2550 - total flux cleaned = 0.00182841 Jy ! Component: 2600 - total flux cleaned = 0.00184911 Jy ! Component: 2650 - total flux cleaned = 0.00180796 Jy ! Component: 2700 - total flux cleaned = 0.00186982 Jy ! Component: 2750 - total flux cleaned = 0.00193083 Jy ! Component: 2800 - total flux cleaned = 0.00197115 Jy ! Component: 2850 - total flux cleaned = 0.00201047 Jy ! Component: 2900 - total flux cleaned = 0.00202994 Jy ! Component: 2950 - total flux cleaned = 0.00202988 Jy ! Component: 3000 - total flux cleaned = 0.00212559 Jy ! Component: 3050 - total flux cleaned = 0.0021063 Jy ! Component: 3100 - total flux cleaned = 0.00214388 Jy ! Component: 3150 - total flux cleaned = 0.00216276 Jy ! Component: 3200 - total flux cleaned = 0.00221831 Jy ! Component: 3250 - total flux cleaned = 0.00227316 Jy ! Component: 3300 - total flux cleaned = 0.00230943 Jy ! Component: 3350 - total flux cleaned = 0.00234551 Jy ! Component: 3400 - total flux cleaned = 0.00238123 Jy ! Component: 3450 - total flux cleaned = 0.00248755 Jy ! Component: 3500 - total flux cleaned = 0.00250499 Jy ! Component: 3550 - total flux cleaned = 0.00255734 Jy ! Component: 3600 - total flux cleaned = 0.00259211 Jy ! Component: 3650 - total flux cleaned = 0.00264375 Jy ! Component: 3700 - total flux cleaned = 0.00264385 Jy ! Component: 3750 - total flux cleaned = 0.00274512 Jy ! Component: 3800 - total flux cleaned = 0.00281194 Jy ! Component: 3850 - total flux cleaned = 0.00284477 Jy ! Component: 3900 - total flux cleaned = 0.00281194 Jy ! Component: 3950 - total flux cleaned = 0.00287723 Jy ! Component: 4000 - total flux cleaned = 0.00290952 Jy ! Component: 4050 - total flux cleaned = 0.00297376 Jy ! Total flux subtracted in 4096 components = 0.00302159 Jy ! Clean residual min=-0.000859 max=0.001025 Jy/beam ! Clean residual mean=0.000002 rms=0.000296 Jy/beam ! Combined flux in latest and established models = 0.342273 Jy keep ! Adding 296 model components to the UV plane model. ! The established model now contains 408 components and 0.342273 Jy ![Exited script file: muppet] wmap "J1302+5748_S_2015_03_17_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.21 x 9.665 at 37.24 degrees (North through East) ! Clean map min=-0.0022644 max=0.29758 Jy/beam ! Writing clean map to FITS file: J1302+5748_S_2015_03_17_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.297577 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00029281 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.295193 0.295193 0.590387 1.18077 2.36155 4.7231 9.44619 18.8924 37.7848 75.5695 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.297 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.21 x 9.665 at 37.24 degrees (North through East) ! Clean map min=-0.0022644 max=0.29758 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1302+5748_S_2015_03_17_pus_uvs.log closed on Fri Dec 30 22:59:09 2016