! Started logfile: J1302+5748_S_2015_01_23_pus_uvs.log on Mon Jan 2 19:25:43 2017 obs J1302+5748_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J1302+5748_S_2015_01_23_pus_uva.fits ! AN table 1: 14 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.863492 visibilities/baseline/integration-bin. ! Found source: J1302+5748 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 2176 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1302+5748_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.746034Jy sigma=0.008848 ! Fit after self-cal, rms=0.741103Jy sigma=0.008802 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.528 mas, bmaj=9.933 mas, bpa=-39.55 degrees ! Estimated noise=1859.15 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.200478 Jy ! Component: 100 - total flux cleaned = 0.244553 Jy ! Total flux subtracted in 100 components = 0.244553 Jy ! Clean residual min=-0.013946 max=0.018235 Jy/beam ! Clean residual mean=0.000030 rms=0.003726 Jy/beam ! Combined flux in latest and established models = 0.244553 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.244553 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107661Jy sigma=0.000992 ! Fit after self-cal, rms=0.107540Jy sigma=0.000992 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.393 mas, bmaj=9.918 mas, bpa=-39.8 degrees ! Estimated noise=1412.7 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0274409 Jy ! Component: 100 - total flux cleaned = 0.0418278 Jy ! Component: 150 - total flux cleaned = 0.050849 Jy ! Component: 200 - total flux cleaned = 0.0573515 Jy ! Total flux subtracted in 200 components = 0.0573515 Jy ! Clean residual min=-0.009768 max=0.009985 Jy/beam ! Clean residual mean=0.000028 rms=0.002706 Jy/beam ! Combined flux in latest and established models = 0.301904 Jy ! Performing phase self-cal ! Adding 70 model components to the UV plane model. ! The established model now contains 72 components and 0.301904 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101505Jy sigma=0.000877 ! Fit after self-cal, rms=0.101468Jy sigma=0.000876 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00* HN 0.98 KP 1.11 ! LA 0.98 MK 1.03 NL 1.00 OV 0.96 ! PT 1.04 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.00* HN 1.05 KP 1.00 ! LA 0.96 MK 0.99 NL 0.92 OV 1.00 ! PT 1.03 SC 1.08 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.00* HN 1.06 KP 0.86 ! LA 0.77 MK 1.04 NL 1.20 OV 0.93 ! PT 1.03 SC 1.05 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 2.01 HN 0.99 KP 0.82 ! LA 0.82 MK 1.01 NL 1.04 OV 0.99 ! PT 1.05 SC 1.02 ! ! ! Fit before self-cal, rms=0.101468Jy sigma=0.000876 ! Fit after self-cal, rms=0.132135Jy sigma=0.000773 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.433 mas, bmaj=9.973 mas, bpa=-39.91 degrees ! Estimated noise=1398.01 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000483037 Jy ! Component: 100 - total flux cleaned = 0.000732265 Jy ! Component: 150 - total flux cleaned = 0.00113868 Jy ! Component: 200 - total flux cleaned = 0.00146719 Jy ! Total flux subtracted in 200 components = 0.00146719 Jy ! Clean residual min=-0.003746 max=0.004675 Jy/beam ! Clean residual mean=-0.000000 rms=0.001069 Jy/beam ! Combined flux in latest and established models = 0.303371 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 86 components and 0.303371 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132048Jy sigma=0.000772 ! Fit after self-cal, rms=0.132242Jy sigma=0.000771 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132242Jy sigma=0.000771 ! Fit after self-cal, rms=0.132394Jy sigma=0.000771 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.434 mas, bmaj=9.969 mas, bpa=-39.91 degrees ! Estimated noise=1396.52 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.44791e-05 Jy ! Component: 100 - total flux cleaned = 0.000394719 Jy ! Component: 150 - total flux cleaned = 0.000664211 Jy ! Component: 200 - total flux cleaned = 0.000875451 Jy ! Total flux subtracted in 200 components = 0.000875451 Jy ! Clean residual min=-0.003577 max=0.004560 Jy/beam ! Clean residual mean=-0.000001 rms=0.001045 Jy/beam ! Combined flux in latest and established models = 0.304247 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 96 components and 0.304247 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132357Jy sigma=0.000771 ! Fit after self-cal, rms=0.132370Jy sigma=0.000771 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-39, 109). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00316212 Jy ! Component: 100 - total flux cleaned = 0.00358919 Jy ! Component: 150 - total flux cleaned = 0.00345878 Jy ! Component: 200 - total flux cleaned = 0.00345841 Jy ! Total flux subtracted in 200 components = 0.00345841 Jy ! Clean residual min=-0.003591 max=0.004442 Jy/beam ! Clean residual mean=-0.000001 rms=0.000961 Jy/beam ! Combined flux in latest and established models = 0.307705 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 118 components and 0.307705 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132099Jy sigma=0.000768 ! Fit after self-cal, rms=0.132093Jy sigma=0.000768 ! Inverting map ! Added new window around map position (-73.5, -48.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00376974 Jy ! Component: 100 - total flux cleaned = 0.00436967 Jy ! Component: 150 - total flux cleaned = 0.00468394 Jy ! Component: 200 - total flux cleaned = 0.00521634 Jy ! Total flux subtracted in 200 components = 0.00521634 Jy ! Clean residual min=-0.003404 max=0.003091 Jy/beam ! Clean residual mean=-0.000000 rms=0.000776 Jy/beam ! Combined flux in latest and established models = 0.312921 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 144 components and 0.312921 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131918Jy sigma=0.000765 ! Fit after self-cal, rms=0.131918Jy sigma=0.000765 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131918Jy sigma=0.000765 ! Fit after self-cal, rms=0.130503Jy sigma=0.000764 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.436 mas, bmaj=9.967 mas, bpa=-39.92 degrees ! Estimated noise=1390.88 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00104376 Jy ! Component: 100 - total flux cleaned = 0.00104606 Jy ! Component: 150 - total flux cleaned = 0.00110092 Jy ! Component: 200 - total flux cleaned = 0.00115309 Jy ! Total flux subtracted in 200 components = 0.00115309 Jy ! Clean residual min=-0.003208 max=0.002871 Jy/beam ! Clean residual mean=-0.000002 rms=0.000724 Jy/beam ! Combined flux in latest and established models = 0.314074 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 161 components and 0.314075 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130402Jy sigma=0.000763 ! Fit after self-cal, rms=0.130405Jy sigma=0.000763 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000406222 Jy ! Component: 100 - total flux cleaned = 0.000548979 Jy ! Component: 150 - total flux cleaned = 0.000640508 Jy ! Component: 200 - total flux cleaned = 0.00068401 Jy ! Total flux subtracted in 200 components = 0.00068401 Jy ! Clean residual min=-0.003193 max=0.002744 Jy/beam ! Clean residual mean=-0.000002 rms=0.000703 Jy/beam ! Combined flux in latest and established models = 0.314759 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 177 components and 0.314758 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130347Jy sigma=0.000763 ! Fit after self-cal, rms=0.130347Jy sigma=0.000763 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130347Jy sigma=0.000763 ! Fit after self-cal, rms=0.129838Jy sigma=0.000763 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.182 mas, bmaj=10.62 mas, bpa=-44.82 degrees ! Estimated noise=1660.39 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000949649 Jy ! Component: 100 - total flux cleaned = 0.00146699 Jy ! Component: 150 - total flux cleaned = 0.00180264 Jy ! Component: 200 - total flux cleaned = 0.00214349 Jy ! Total flux subtracted in 200 components = 0.00214349 Jy ! Clean residual min=-0.002365 max=0.002033 Jy/beam ! Clean residual mean=-0.000005 rms=0.000629 Jy/beam ! Combined flux in latest and established models = 0.316902 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 201 components and 0.316902 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129779Jy sigma=0.000762 ! Fit after self-cal, rms=0.129777Jy sigma=0.000762 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000245992 Jy ! Component: 100 - total flux cleaned = 0.000561057 Jy ! Component: 150 - total flux cleaned = 0.000736567 Jy ! Component: 200 - total flux cleaned = 0.000956747 Jy ! Total flux subtracted in 200 components = 0.000956747 Jy ! Clean residual min=-0.002291 max=0.002024 Jy/beam ! Clean residual mean=-0.000005 rms=0.000607 Jy/beam ! Combined flux in latest and established models = 0.317859 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 215 components and 0.317859 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129750Jy sigma=0.000762 ! Fit after self-cal, rms=0.129748Jy sigma=0.000762 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.437 mas, bmaj=9.964 mas, bpa=-39.93 degrees ! Estimated noise=1389.22 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.437 x 9.964 at -39.93 degrees (North through East) ! Clean map min=-0.0028984 max=0.26366 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.544 mas, bmaj=9.935 mas, bpa=-39.59 degrees ! Estimated noise=1863.02 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.200818 Jy ! Component: 100 - total flux cleaned = 0.244878 Jy ! Component: 150 - total flux cleaned = 0.260989 Jy ! Component: 200 - total flux cleaned = 0.27155 Jy ! Total flux subtracted in 200 components = 0.27155 Jy ! Clean residual min=-0.006415 max=0.007456 Jy/beam ! Clean residual mean=0.000014 rms=0.001822 Jy/beam ! Combined flux in latest and established models = 0.27155 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.27155 Jy ! Inverting map and beam ! Estimated beam: bmin=3.437 mas, bmaj=9.964 mas, bpa=-39.93 degrees ! Estimated noise=1389.22 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0100168 Jy ! Component: 100 - total flux cleaned = 0.0160578 Jy ! Component: 150 - total flux cleaned = 0.0207626 Jy ! Component: 200 - total flux cleaned = 0.023781 Jy ! Total flux subtracted in 200 components = 0.023781 Jy ! Clean residual min=-0.004213 max=0.004134 Jy/beam ! Clean residual mean=0.000017 rms=0.001131 Jy/beam ! Combined flux in latest and established models = 0.295331 Jy ! Adding 58 model components to the UV plane model. ! The established model now contains 67 components and 0.295331 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.182 mas, bmaj=10.62 mas, bpa=-44.82 degrees ! Estimated noise=1660.39 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00506324 Jy ! Component: 100 - total flux cleaned = 0.00800664 Jy ! Component: 150 - total flux cleaned = 0.0104198 Jy ! Component: 200 - total flux cleaned = 0.0122769 Jy ! Total flux subtracted in 200 components = 0.0122769 Jy ! Clean residual min=-0.003020 max=0.003049 Jy/beam ! Clean residual mean=0.000011 rms=0.000904 Jy/beam ! Combined flux in latest and established models = 0.307608 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00116121 Jy ! Component: 100 - total flux cleaned = 0.00203346 Jy ! Component: 150 - total flux cleaned = 0.00324941 Jy ! Component: 200 - total flux cleaned = 0.00409728 Jy ! Total flux subtracted in 200 components = 0.00409728 Jy ! Clean residual min=-0.002897 max=0.002491 Jy/beam ! Clean residual mean=0.000007 rms=0.000730 Jy/beam ! Combined flux in latest and established models = 0.311705 Jy ! Adding 92 model components to the UV plane model. ! The established model now contains 153 components and 0.311705 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.437 mas, bmaj=9.964 mas, bpa=-39.93 degrees ! Estimated noise=1389.22 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000888492 Jy ! Component: 100 - total flux cleaned = 0.000796093 Jy ! Component: 150 - total flux cleaned = 0.00107569 Jy ! Component: 200 - total flux cleaned = 0.00159729 Jy ! Total flux subtracted in 200 components = 0.00159729 Jy ! Clean residual min=-0.003163 max=0.002984 Jy/beam ! Clean residual mean=0.000002 rms=0.000731 Jy/beam ! Combined flux in latest and established models = 0.313303 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 175 components and 0.313303 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129934Jy sigma=0.000764 ! Fit after self-cal, rms=0.129921Jy sigma=0.000764 wmodel J1302+5748_S_2015_01_23_pus_map.mod ! Writing 175 model components to file: J1302+5748_S_2015_01_23_pus_map.mod wobs J1302+5748_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J1302+5748_S_2015_01_23_pus_uvs.fits wwins J1302+5748_S_2015_01_23_pus_map.win ! wwins: Wrote 3 windows to J1302+5748_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000187078 Jy ! Component: 100 - total flux cleaned = -0.000136115 Jy ! Component: 150 - total flux cleaned = -0.000279281 Jy ! Component: 200 - total flux cleaned = -0.000323204 Jy ! Component: 250 - total flux cleaned = -0.000195062 Jy ! Component: 300 - total flux cleaned = -0.00019502 Jy ! Component: 350 - total flux cleaned = -0.00019429 Jy ! Component: 400 - total flux cleaned = -0.000232328 Jy ! Component: 450 - total flux cleaned = -0.000156615 Jy ! Component: 500 - total flux cleaned = -0.000342261 Jy ! Component: 550 - total flux cleaned = -0.00063244 Jy ! Component: 600 - total flux cleaned = -0.000881382 Jy ! Component: 650 - total flux cleaned = -0.00123211 Jy ! Component: 700 - total flux cleaned = -0.00157527 Jy ! Component: 750 - total flux cleaned = -0.00177801 Jy ! Component: 800 - total flux cleaned = -0.00204465 Jy ! Component: 850 - total flux cleaned = -0.00237287 Jy ! Component: 900 - total flux cleaned = -0.0025989 Jy ! Component: 950 - total flux cleaned = -0.00285393 Jy ! Component: 1000 - total flux cleaned = -0.00307394 Jy ! Component: 1050 - total flux cleaned = -0.00332192 Jy ! Component: 1100 - total flux cleaned = -0.00350533 Jy ! Component: 1150 - total flux cleaned = -0.00374693 Jy ! Component: 1200 - total flux cleaned = -0.00392528 Jy ! Component: 1250 - total flux cleaned = -0.00407242 Jy ! Component: 1300 - total flux cleaned = -0.00424692 Jy ! Component: 1350 - total flux cleaned = -0.004447 Jy ! Component: 1400 - total flux cleaned = -0.00450339 Jy ! Component: 1450 - total flux cleaned = -0.00464333 Jy ! Component: 1500 - total flux cleaned = -0.00475395 Jy ! Component: 1550 - total flux cleaned = -0.00489034 Jy ! Component: 1600 - total flux cleaned = -0.00505183 Jy ! Component: 1650 - total flux cleaned = -0.00513193 Jy ! Component: 1700 - total flux cleaned = -0.00523743 Jy ! Component: 1750 - total flux cleaned = -0.00539327 Jy ! Component: 1800 - total flux cleaned = -0.00547024 Jy ! Component: 1850 - total flux cleaned = -0.00554634 Jy ! Component: 1900 - total flux cleaned = -0.00554628 Jy ! Component: 1950 - total flux cleaned = -0.00557184 Jy ! Component: 2000 - total flux cleaned = -0.0056214 Jy ! Component: 2050 - total flux cleaned = -0.00569501 Jy ! Component: 2100 - total flux cleaned = -0.00576759 Jy ! Component: 2150 - total flux cleaned = -0.00581528 Jy ! Component: 2200 - total flux cleaned = -0.00588634 Jy ! Component: 2250 - total flux cleaned = -0.00595679 Jy ! Component: 2300 - total flux cleaned = -0.00598004 Jy ! Component: 2350 - total flux cleaned = -0.00611841 Jy ! Component: 2400 - total flux cleaned = -0.00618693 Jy ! Component: 2450 - total flux cleaned = -0.0063456 Jy ! Component: 2500 - total flux cleaned = -0.00643545 Jy ! Component: 2550 - total flux cleaned = -0.00652456 Jy ! Component: 2600 - total flux cleaned = -0.00656871 Jy ! Component: 2650 - total flux cleaned = -0.00667859 Jy ! Component: 2700 - total flux cleaned = -0.00676568 Jy ! Component: 2750 - total flux cleaned = -0.0067874 Jy ! Component: 2800 - total flux cleaned = -0.00683033 Jy ! Component: 2850 - total flux cleaned = -0.00685181 Jy ! Component: 2900 - total flux cleaned = -0.00695728 Jy ! Component: 2950 - total flux cleaned = -0.00706181 Jy ! Component: 3000 - total flux cleaned = -0.0071656 Jy ! Component: 3050 - total flux cleaned = -0.00720681 Jy ! Component: 3100 - total flux cleaned = -0.00726811 Jy ! Component: 3150 - total flux cleaned = -0.00728844 Jy ! Component: 3200 - total flux cleaned = -0.00740983 Jy ! Component: 3250 - total flux cleaned = -0.00745008 Jy ! Component: 3300 - total flux cleaned = -0.00749007 Jy ! Component: 3350 - total flux cleaned = -0.00751015 Jy ! Component: 3400 - total flux cleaned = -0.007649 Jy ! Component: 3450 - total flux cleaned = -0.00768838 Jy ! Component: 3500 - total flux cleaned = -0.00772768 Jy ! Component: 3550 - total flux cleaned = -0.00778628 Jy ! Component: 3600 - total flux cleaned = -0.0079221 Jy ! Component: 3650 - total flux cleaned = -0.00799923 Jy ! Component: 3700 - total flux cleaned = -0.0080376 Jy ! Component: 3750 - total flux cleaned = -0.00809489 Jy ! Component: 3800 - total flux cleaned = -0.00807594 Jy ! Component: 3850 - total flux cleaned = -0.00815171 Jy ! Component: 3900 - total flux cleaned = -0.00822727 Jy ! Component: 3950 - total flux cleaned = -0.00833976 Jy ! Component: 4000 - total flux cleaned = -0.00839584 Jy ! Component: 4050 - total flux cleaned = -0.0083958 Jy ! Total flux subtracted in 4096 components = -0.00850713 Jy ! Clean residual min=-0.001042 max=0.001071 Jy/beam ! Clean residual mean=0.000002 rms=0.000343 Jy/beam ! Combined flux in latest and established models = 0.304795 Jy keep ! Adding 264 model components to the UV plane model. ! The established model now contains 439 components and 0.304795 Jy ![Exited script file: muppet] wmap "J1302+5748_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.437 x 9.964 at -39.93 degrees (North through East) ! Clean map min=-0.0024177 max=0.26297 Jy/beam ! Writing clean map to FITS file: J1302+5748_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.262968 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000338323 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.385968 0.385968 0.771935 1.54387 3.08774 6.17548 12.351 24.7019 49.4038 98.8077 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.262 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.437 x 9.964 at -39.93 degrees (North through East) ! Clean map min=-0.0024177 max=0.26297 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1302+5748_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 19:25:48 2017