! Started logfile: J1300+1206_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:27:28 2017 obs J1300+1206_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J1300+1206_S_2014_01_04_pus_uva.fits ! AN table 1: 97 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.595361 visibilities/baseline/integration-bin. ! Found source: J1300+1206 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 8316 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1300+1206_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 195 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 195 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 195 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 195 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.937679Jy sigma=0.012605 ! Fit after self-cal, rms=0.924371Jy sigma=0.012369 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.299 mas, bmaj=5.359 mas, bpa=5.95 degrees ! Estimated noise=998.752 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0562413 Jy ! Component: 100 - total flux cleaned = 0.0743456 Jy ! Total flux subtracted in 100 components = 0.0743456 Jy ! Clean residual min=-0.005928 max=0.008989 Jy/beam ! Clean residual mean=-0.000075 rms=0.001655 Jy/beam ! Combined flux in latest and established models = 0.0743456 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.0743456 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077582Jy sigma=0.000902 ! Fit after self-cal, rms=0.077622Jy sigma=0.000901 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.125 mas, bmaj=6.178 mas, bpa=2.516 degrees ! Estimated noise=615.271 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0135019 Jy ! Component: 100 - total flux cleaned = 0.0194976 Jy ! Component: 150 - total flux cleaned = 0.0229744 Jy ! Component: 200 - total flux cleaned = 0.02519 Jy ! Total flux subtracted in 200 components = 0.02519 Jy ! Clean residual min=-0.002618 max=0.003473 Jy/beam ! Clean residual mean=-0.000055 rms=0.000763 Jy/beam ! Combined flux in latest and established models = 0.0995356 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 47 components and 0.0995356 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075417Jy sigma=0.000870 ! Fit after self-cal, rms=0.075457Jy sigma=0.000870 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.83 KP 1.00* LA 1.02 ! MK 1.00 NL 0.99 OV 0.96 PT 0.98 ! SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.98 KP 1.00* LA 1.00 ! MK 1.01 NL 1.05 OV 1.01 PT 0.98 ! SC 1.11 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.08 KP 1.00* LA 0.78 ! MK 0.99 NL 1.02 OV 1.00 PT 0.92 ! SC 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.05 KP 1.00* LA 0.93 ! MK 1.05 NL 1.20 OV 0.99 PT 1.07 ! SC 0.87 ! ! ! Fit before self-cal, rms=0.075457Jy sigma=0.000870 ! Fit after self-cal, rms=0.074488Jy sigma=0.000863 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.125 mas, bmaj=6.227 mas, bpa=3.254 degrees ! Estimated noise=612.661 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00026115 Jy ! Component: 100 - total flux cleaned = 0.000463049 Jy ! Component: 150 - total flux cleaned = 0.000580437 Jy ! Component: 200 - total flux cleaned = 0.000661318 Jy ! Total flux subtracted in 200 components = 0.000661318 Jy ! Clean residual min=-0.002621 max=0.002833 Jy/beam ! Clean residual mean=-0.000020 rms=0.000602 Jy/beam ! Combined flux in latest and established models = 0.100197 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 51 components and 0.100197 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074456Jy sigma=0.000863 ! Fit after self-cal, rms=0.074387Jy sigma=0.000862 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074387Jy sigma=0.000862 ! Fit after self-cal, rms=0.074759Jy sigma=0.000861 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.136 mas, bmaj=6.202 mas, bpa=3.706 degrees ! Estimated noise=614.206 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000545581 Jy ! Component: 100 - total flux cleaned = 0.000613671 Jy ! Component: 150 - total flux cleaned = 0.000671963 Jy ! Component: 200 - total flux cleaned = 0.000710232 Jy ! Total flux subtracted in 200 components = 0.000710232 Jy ! Clean residual min=-0.002727 max=0.002664 Jy/beam ! Clean residual mean=-0.000014 rms=0.000562 Jy/beam ! Combined flux in latest and established models = 0.100907 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 55 components and 0.100907 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074737Jy sigma=0.000860 ! Fit after self-cal, rms=0.074799Jy sigma=0.000860 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-75, -38.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00135214 Jy ! Component: 100 - total flux cleaned = 0.00151576 Jy ! Component: 150 - total flux cleaned = 0.00155956 Jy ! Component: 200 - total flux cleaned = 0.00167198 Jy ! Total flux subtracted in 200 components = 0.00167198 Jy ! Clean residual min=-0.002473 max=0.002303 Jy/beam ! Clean residual mean=-0.000011 rms=0.000510 Jy/beam ! Combined flux in latest and established models = 0.102579 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 76 components and 0.102579 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074682Jy sigma=0.000859 ! Fit after self-cal, rms=0.074681Jy sigma=0.000859 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074681Jy sigma=0.000859 ! Fit after self-cal, rms=0.074796Jy sigma=0.000859 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.122 mas, bmaj=6.19 mas, bpa=4.357 degrees ! Estimated noise=612.398 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000350089 Jy ! Component: 100 - total flux cleaned = 0.000465605 Jy ! Component: 150 - total flux cleaned = 0.000598735 Jy ! Component: 200 - total flux cleaned = 0.000718521 Jy ! Total flux subtracted in 200 components = 0.000718521 Jy ! Clean residual min=-0.002255 max=0.002421 Jy/beam ! Clean residual mean=-0.000012 rms=0.000495 Jy/beam ! Combined flux in latest and established models = 0.103298 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 83 components and 0.103298 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074746Jy sigma=0.000858 ! Fit after self-cal, rms=0.074811Jy sigma=0.000858 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-29, 29). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00214765 Jy ! Component: 100 - total flux cleaned = 0.00228293 Jy ! Component: 150 - total flux cleaned = 0.00235987 Jy ! Component: 200 - total flux cleaned = 0.00235807 Jy ! Total flux subtracted in 200 components = 0.00235807 Jy ! Clean residual min=-0.002023 max=0.001971 Jy/beam ! Clean residual mean=-0.000009 rms=0.000444 Jy/beam ! Combined flux in latest and established models = 0.105656 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 97 components and 0.105656 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074713Jy sigma=0.000857 ! Fit after self-cal, rms=0.074733Jy sigma=0.000857 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074733Jy sigma=0.000857 ! Fit after self-cal, rms=0.075367Jy sigma=0.000857 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.909 mas, bmaj=9.751 mas, bpa=8.905 degrees ! Estimated noise=725.037 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000246659 Jy ! Component: 100 - total flux cleaned = 0.0003716 Jy ! Component: 150 - total flux cleaned = 0.000413056 Jy ! Component: 200 - total flux cleaned = 0.000431577 Jy ! Total flux subtracted in 200 components = 0.000431577 Jy ! Clean residual min=-0.001544 max=0.001575 Jy/beam ! Clean residual mean=-0.000012 rms=0.000441 Jy/beam ! Combined flux in latest and established models = 0.106087 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 109 components and 0.106087 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075356Jy sigma=0.000857 ! Fit after self-cal, rms=0.075427Jy sigma=0.000857 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000217516 Jy ! Component: 100 - total flux cleaned = -0.000184952 Jy ! Component: 150 - total flux cleaned = -0.000155549 Jy ! Component: 200 - total flux cleaned = -0.000128566 Jy ! Total flux subtracted in 200 components = -0.000128566 Jy ! Clean residual min=-0.001556 max=0.001530 Jy/beam ! Clean residual mean=-0.000011 rms=0.000425 Jy/beam ! Combined flux in latest and established models = 0.105959 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 121 components and 0.105959 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075422Jy sigma=0.000857 ! Fit after self-cal, rms=0.075425Jy sigma=0.000857 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.124 mas, bmaj=6.187 mas, bpa=4.881 degrees ! Estimated noise=613.518 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.124 x 6.187 at 4.881 degrees (North through East) ! Clean map min=-0.001892 max=0.076106 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.28 mas, bmaj=5.354 mas, bpa=8.749 degrees ! Estimated noise=995.388 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0556269 Jy ! Component: 100 - total flux cleaned = 0.0743421 Jy ! Component: 150 - total flux cleaned = 0.0840164 Jy ! Component: 200 - total flux cleaned = 0.0882809 Jy ! Total flux subtracted in 200 components = 0.0882809 Jy ! Clean residual min=-0.004507 max=0.005028 Jy/beam ! Clean residual mean=-0.000037 rms=0.001144 Jy/beam ! Combined flux in latest and established models = 0.0882809 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 34 model components to the UV plane model. ! The established model now contains 34 components and 0.0882809 Jy ! Inverting map and beam ! Estimated beam: bmin=4.124 mas, bmaj=6.187 mas, bpa=4.881 degrees ! Estimated noise=613.518 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.5, 0.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00683504 Jy ! Component: 100 - total flux cleaned = 0.010602 Jy ! Component: 150 - total flux cleaned = 0.0125825 Jy ! Component: 200 - total flux cleaned = 0.0139248 Jy ! Total flux subtracted in 200 components = 0.0139248 Jy ! Clean residual min=-0.002397 max=0.001965 Jy/beam ! Clean residual mean=-0.000023 rms=0.000525 Jy/beam ! Combined flux in latest and established models = 0.102206 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 56 components and 0.102206 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.909 mas, bmaj=9.751 mas, bpa=8.905 degrees ! Estimated noise=725.037 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00207006 Jy ! Component: 100 - total flux cleaned = 0.002391 Jy ! Component: 150 - total flux cleaned = 0.0027724 Jy ! Component: 200 - total flux cleaned = 0.00312765 Jy ! Total flux subtracted in 200 components = 0.00312765 Jy ! Clean residual min=-0.001887 max=0.001422 Jy/beam ! Clean residual mean=-0.000018 rms=0.000438 Jy/beam ! Combined flux in latest and established models = 0.105333 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000359892 Jy ! Component: 100 - total flux cleaned = 0.000595606 Jy ! Component: 150 - total flux cleaned = 0.000805305 Jy ! Component: 200 - total flux cleaned = 0.00095167 Jy ! Total flux subtracted in 200 components = 0.00095167 Jy ! Clean residual min=-0.001664 max=0.001387 Jy/beam ! Clean residual mean=-0.000011 rms=0.000402 Jy/beam ! Combined flux in latest and established models = 0.106285 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 102 components and 0.106285 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.124 mas, bmaj=6.187 mas, bpa=4.881 degrees ! Estimated noise=613.518 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.31246e-05 Jy ! Component: 100 - total flux cleaned = -0.000161372 Jy ! Component: 150 - total flux cleaned = -0.000207417 Jy ! Component: 200 - total flux cleaned = -9.12773e-05 Jy ! Total flux subtracted in 200 components = -9.12773e-05 Jy ! Clean residual min=-0.001815 max=0.001707 Jy/beam ! Clean residual mean=-0.000005 rms=0.000399 Jy/beam ! Combined flux in latest and established models = 0.106194 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 120 components and 0.106194 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075351Jy sigma=0.000857 ! Fit after self-cal, rms=0.075258Jy sigma=0.000857 wmodel J1300+1206_S_2014_01_04_pus_map.mod ! Writing 120 model components to file: J1300+1206_S_2014_01_04_pus_map.mod wobs J1300+1206_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J1300+1206_S_2014_01_04_pus_uvs.fits wwins J1300+1206_S_2014_01_04_pus_map.win ! wwins: Wrote 4 windows to J1300+1206_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -5.76288e-05 Jy ! Component: 100 - total flux cleaned = -8.5782e-05 Jy ! Component: 150 - total flux cleaned = -6.10757e-05 Jy ! Component: 200 - total flux cleaned = -3.75799e-05 Jy ! Component: 250 - total flux cleaned = -3.79204e-05 Jy ! Component: 300 - total flux cleaned = -1.63685e-05 Jy ! Component: 350 - total flux cleaned = 4.83851e-06 Jy ! Component: 400 - total flux cleaned = 2.53955e-05 Jy ! Component: 450 - total flux cleaned = 8.56951e-05 Jy ! Component: 500 - total flux cleaned = 0.000144245 Jy ! Component: 550 - total flux cleaned = 0.000201157 Jy ! Component: 600 - total flux cleaned = 0.000200947 Jy ! Component: 650 - total flux cleaned = 0.000255512 Jy ! Component: 700 - total flux cleaned = 0.000273345 Jy ! Component: 750 - total flux cleaned = 0.000308484 Jy ! Component: 800 - total flux cleaned = 0.000377613 Jy ! Component: 850 - total flux cleaned = 0.000394555 Jy ! Component: 900 - total flux cleaned = 0.000428146 Jy ! Component: 950 - total flux cleaned = 0.000477408 Jy ! Component: 1000 - total flux cleaned = 0.000493336 Jy ! Component: 1050 - total flux cleaned = 0.000461646 Jy ! Component: 1100 - total flux cleaned = 0.000524715 Jy ! Component: 1150 - total flux cleaned = 0.000509349 Jy ! Component: 1200 - total flux cleaned = 0.000494371 Jy ! Component: 1250 - total flux cleaned = 0.000464529 Jy ! Component: 1300 - total flux cleaned = 0.000494185 Jy ! Component: 1350 - total flux cleaned = 0.000450405 Jy ! Component: 1400 - total flux cleaned = 0.000421481 Jy ! Component: 1450 - total flux cleaned = 0.000350118 Jy ! Component: 1500 - total flux cleaned = 0.00035021 Jy ! Component: 1550 - total flux cleaned = 0.000280355 Jy ! Component: 1600 - total flux cleaned = 0.000225219 Jy ! Component: 1650 - total flux cleaned = 0.000157095 Jy ! Component: 1700 - total flux cleaned = 0.000103367 Jy ! Component: 1750 - total flux cleaned = 7.67867e-05 Jy ! Component: 1800 - total flux cleaned = 3.72917e-05 Jy ! Component: 1850 - total flux cleaned = 1.14323e-05 Jy ! Component: 1900 - total flux cleaned = 1.13535e-05 Jy ! Component: 1950 - total flux cleaned = -2.69121e-05 Jy ! Component: 2000 - total flux cleaned = -1.43367e-05 Jy ! Component: 2050 - total flux cleaned = -6.4352e-05 Jy ! Component: 2100 - total flux cleaned = -6.42571e-05 Jy ! Component: 2150 - total flux cleaned = -8.87087e-05 Jy ! Component: 2200 - total flux cleaned = -0.000112916 Jy ! Component: 2250 - total flux cleaned = -0.000124862 Jy ! Component: 2300 - total flux cleaned = -0.000148689 Jy ! Component: 2350 - total flux cleaned = -0.000160451 Jy ! Component: 2400 - total flux cleaned = -0.000207223 Jy ! Component: 2450 - total flux cleaned = -0.000172416 Jy ! Component: 2500 - total flux cleaned = -0.000264633 Jy ! Component: 2550 - total flux cleaned = -0.000287432 Jy ! Component: 2600 - total flux cleaned = -0.000287435 Jy ! Component: 2650 - total flux cleaned = -0.000309939 Jy ! Component: 2700 - total flux cleaned = -0.000321122 Jy ! Component: 2750 - total flux cleaned = -0.000354357 Jy ! Component: 2800 - total flux cleaned = -0.000409203 Jy ! Component: 2850 - total flux cleaned = -0.000419926 Jy ! Component: 2900 - total flux cleaned = -0.000441505 Jy ! Component: 2950 - total flux cleaned = -0.000473594 Jy ! Component: 3000 - total flux cleaned = -0.000484193 Jy ! Component: 3050 - total flux cleaned = -0.000494777 Jy ! Component: 3100 - total flux cleaned = -0.000526245 Jy ! Component: 3150 - total flux cleaned = -0.000557451 Jy ! Component: 3200 - total flux cleaned = -0.000567713 Jy ! Component: 3250 - total flux cleaned = -0.000578083 Jy ! Component: 3300 - total flux cleaned = -0.000598573 Jy ! Component: 3350 - total flux cleaned = -0.000649398 Jy ! Component: 3400 - total flux cleaned = -0.000659593 Jy ! Component: 3450 - total flux cleaned = -0.000699706 Jy ! Component: 3500 - total flux cleaned = -0.000739652 Jy ! Component: 3550 - total flux cleaned = -0.000769284 Jy ! Component: 3600 - total flux cleaned = -0.00075948 Jy ! Component: 3650 - total flux cleaned = -0.000779149 Jy ! Component: 3700 - total flux cleaned = -0.00079862 Jy ! Component: 3750 - total flux cleaned = -0.00080828 Jy ! Component: 3800 - total flux cleaned = -0.00079866 Jy ! Component: 3850 - total flux cleaned = -0.00081788 Jy ! Component: 3900 - total flux cleaned = -0.000817851 Jy ! Component: 3950 - total flux cleaned = -0.000817878 Jy ! Component: 4000 - total flux cleaned = -0.000846251 Jy ! Component: 4050 - total flux cleaned = -0.000846253 Jy ! Total flux subtracted in 4096 components = -0.000874391 Jy ! Clean residual min=-0.000620 max=0.000566 Jy/beam ! Clean residual mean=-0.000002 rms=0.000157 Jy/beam ! Combined flux in latest and established models = 0.105319 Jy keep ! Adding 244 model components to the UV plane model. ! The established model now contains 364 components and 0.105319 Jy ![Exited script file: muppet] wmap "J1300+1206_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.124 x 6.187 at 4.881 degrees (North through East) ! Clean map min=-0.0014054 max=0.076602 Jy/beam ! Writing clean map to FITS file: J1300+1206_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0766024 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000151923 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.594981 0.594981 1.18996 2.37993 4.75985 9.5197 19.0394 38.0788 76.1576 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.076 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.124 x 6.187 at 4.881 degrees (North through East) ! Clean map min=-0.0014054 max=0.076602 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1300+1206_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:27:33 2017