! Started logfile: J1259-2436_S_2015_01_22_pus_uvs.log on Tue Jan 3 22:53:14 2017 obs J1259-2436_S_2015_01_22_pus_uva.fits ! Reading UV FITS file: J1259-2436_S_2015_01_22_pus_uva.fits ! AN table 1: 30 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.8 visibilities/baseline/integration-bin. ! Found source: J1259-2436 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 281 lines of history. ! ! Reading 4320 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1259-2436_S_2015_01_22_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.905240Jy sigma=0.008836 ! Fit after self-cal, rms=0.879619Jy sigma=0.008660 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.304 mas, bmaj=6.462 mas, bpa=3.545 degrees ! Estimated noise=2175.62 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0859976 Jy ! Component: 100 - total flux cleaned = 0.114637 Jy ! Total flux subtracted in 100 components = 0.114637 Jy ! Clean residual min=-0.012457 max=0.019484 Jy/beam ! Clean residual mean=-0.000151 rms=0.003915 Jy/beam ! Combined flux in latest and established models = 0.114637 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.114637 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112870Jy sigma=0.000965 ! Fit after self-cal, rms=0.112748Jy sigma=0.000965 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.893 mas, bmaj=7.584 mas, bpa=4.198 degrees ! Estimated noise=1135.33 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.029541 Jy ! Component: 100 - total flux cleaned = 0.0454097 Jy ! Component: 150 - total flux cleaned = 0.0548474 Jy ! Component: 200 - total flux cleaned = 0.0605164 Jy ! Total flux subtracted in 200 components = 0.0605164 Jy ! Clean residual min=-0.011228 max=0.021995 Jy/beam ! Clean residual mean=-0.000186 rms=0.004434 Jy/beam ! Combined flux in latest and established models = 0.175153 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 39 components and 0.175153 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104421Jy sigma=0.000886 ! Fit after self-cal, rms=0.104344Jy sigma=0.000885 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 1.00* HN 1.43 KP 0.97 ! LA 0.97 MK 1.03 NL 1.75 OV 0.93 ! PT 0.90 SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.00* HN 1.71 KP 0.90 ! LA 0.97 MK 1.02 NL 1.92 OV 0.95 ! PT 0.85 SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.82 FD 1.00* HN 1.54 KP 0.77 ! LA 0.71 MK 1.12 NL 1.62 OV 0.89 ! PT 0.88 SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00* HN 1.38 KP 0.73 ! LA 0.77 MK 1.08 NL 1.13 OV 0.98 ! PT 0.92 SC 1.04 ! ! ! Fit before self-cal, rms=0.104344Jy sigma=0.000885 ! Fit after self-cal, rms=0.114928Jy sigma=0.000782 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.975 mas, bmaj=7.598 mas, bpa=5.759 degrees ! Estimated noise=1165.59 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (5.5, -5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00823433 Jy ! Component: 100 - total flux cleaned = 0.00859509 Jy ! Component: 150 - total flux cleaned = 0.00884921 Jy ! Component: 200 - total flux cleaned = 0.0090749 Jy ! Total flux subtracted in 200 components = 0.0090749 Jy ! Clean residual min=-0.005411 max=0.006344 Jy/beam ! Clean residual mean=-0.000027 rms=0.001444 Jy/beam ! Combined flux in latest and established models = 0.184228 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 52 components and 0.184228 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114067Jy sigma=0.000775 ! Fit after self-cal, rms=0.114541Jy sigma=0.000771 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114541Jy sigma=0.000771 ! Fit after self-cal, rms=0.109493Jy sigma=0.000771 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.954 mas, bmaj=7.563 mas, bpa=5.533 degrees ! Estimated noise=1153.49 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00399671 Jy ! Component: 100 - total flux cleaned = 0.00419202 Jy ! Component: 150 - total flux cleaned = 0.00419674 Jy ! Component: 200 - total flux cleaned = 0.00426192 Jy ! Total flux subtracted in 200 components = 0.00426192 Jy ! Clean residual min=-0.005095 max=0.005697 Jy/beam ! Clean residual mean=-0.000030 rms=0.001216 Jy/beam ! Combined flux in latest and established models = 0.18849 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 66 components and 0.18849 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109264Jy sigma=0.000769 ! Fit after self-cal, rms=0.109162Jy sigma=0.000768 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (17.5, 6.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00508068 Jy ! Component: 100 - total flux cleaned = 0.00762494 Jy ! Component: 150 - total flux cleaned = 0.00880287 Jy ! Component: 200 - total flux cleaned = 0.00910015 Jy ! Total flux subtracted in 200 components = 0.00910015 Jy ! Clean residual min=-0.004255 max=0.003723 Jy/beam ! Clean residual mean=-0.000005 rms=0.000926 Jy/beam ! Combined flux in latest and established models = 0.19759 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 87 components and 0.19759 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108921Jy sigma=0.000765 ! Fit after self-cal, rms=0.108884Jy sigma=0.000765 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108884Jy sigma=0.000765 ! Fit after self-cal, rms=0.105547Jy sigma=0.000764 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.945 mas, bmaj=7.555 mas, bpa=5.253 degrees ! Estimated noise=1143.1 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00198233 Jy ! Component: 100 - total flux cleaned = 0.00293292 Jy ! Component: 150 - total flux cleaned = 0.00317844 Jy ! Component: 200 - total flux cleaned = 0.00326646 Jy ! Total flux subtracted in 200 components = 0.00326646 Jy ! Clean residual min=-0.004061 max=0.003184 Jy/beam ! Clean residual mean=-0.000007 rms=0.000828 Jy/beam ! Combined flux in latest and established models = 0.200857 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 106 components and 0.200857 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105469Jy sigma=0.000764 ! Fit after self-cal, rms=0.105428Jy sigma=0.000764 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000435878 Jy ! Component: 100 - total flux cleaned = 0.000515618 Jy ! Component: 150 - total flux cleaned = 0.000627309 Jy ! Component: 200 - total flux cleaned = 0.000661686 Jy ! Total flux subtracted in 200 components = 0.000661686 Jy ! Clean residual min=-0.003919 max=0.003153 Jy/beam ! Clean residual mean=-0.000005 rms=0.000813 Jy/beam ! Combined flux in latest and established models = 0.201519 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 118 components and 0.201519 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105389Jy sigma=0.000763 ! Fit after self-cal, rms=0.105381Jy sigma=0.000763 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105381Jy sigma=0.000763 ! Fit after self-cal, rms=0.104180Jy sigma=0.000763 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.491 mas, bmaj=19.27 mas, bpa=11.18 degrees ! Estimated noise=1413.68 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000852454 Jy ! Component: 100 - total flux cleaned = 0.00126874 Jy ! Component: 150 - total flux cleaned = 0.00162909 Jy ! Component: 200 - total flux cleaned = 0.00189105 Jy ! Total flux subtracted in 200 components = 0.00189105 Jy ! Clean residual min=-0.003683 max=0.002781 Jy/beam ! Clean residual mean=-0.000020 rms=0.000979 Jy/beam ! Combined flux in latest and established models = 0.20341 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 123 components and 0.20341 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104157Jy sigma=0.000763 ! Fit after self-cal, rms=0.104125Jy sigma=0.000763 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000127182 Jy ! Component: 100 - total flux cleaned = 0.000414279 Jy ! Component: 150 - total flux cleaned = 0.000558313 Jy ! Component: 200 - total flux cleaned = 0.000578805 Jy ! Total flux subtracted in 200 components = 0.000578805 Jy ! Clean residual min=-0.003584 max=0.002668 Jy/beam ! Clean residual mean=-0.000017 rms=0.000955 Jy/beam ! Combined flux in latest and established models = 0.203988 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 133 components and 0.203988 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104118Jy sigma=0.000763 ! Fit after self-cal, rms=0.104107Jy sigma=0.000763 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.94 mas, bmaj=7.551 mas, bpa=5.106 degrees ! Estimated noise=1141.84 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.94 x 7.551 at 5.106 degrees (North through East) ! Clean map min=-0.0047973 max=0.11782 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.328 mas, bmaj=6.368 mas, bpa=4.56 degrees ! Estimated noise=2225.15 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0874189 Jy ! Component: 100 - total flux cleaned = 0.117033 Jy ! Component: 150 - total flux cleaned = 0.135237 Jy ! Component: 200 - total flux cleaned = 0.148299 Jy ! Total flux subtracted in 200 components = 0.148299 Jy ! Clean residual min=-0.008318 max=0.009715 Jy/beam ! Clean residual mean=-0.000080 rms=0.002286 Jy/beam ! Combined flux in latest and established models = 0.148299 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 34 model components to the UV plane model. ! The established model now contains 34 components and 0.148299 Jy ! Inverting map and beam ! Estimated beam: bmin=2.94 mas, bmaj=7.551 mas, bpa=5.106 degrees ! Estimated noise=1141.84 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0159542 Jy ! Component: 100 - total flux cleaned = 0.0253773 Jy ! Component: 150 - total flux cleaned = 0.0323654 Jy ! Component: 200 - total flux cleaned = 0.0377728 Jy ! Total flux subtracted in 200 components = 0.0377728 Jy ! Clean residual min=-0.004624 max=0.004330 Jy/beam ! Clean residual mean=-0.000062 rms=0.001175 Jy/beam ! Combined flux in latest and established models = 0.186072 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 75 components and 0.186072 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.491 mas, bmaj=19.27 mas, bpa=11.18 degrees ! Estimated noise=1413.68 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00641371 Jy ! Component: 100 - total flux cleaned = 0.0104022 Jy ! Component: 150 - total flux cleaned = 0.0128625 Jy ! Component: 200 - total flux cleaned = 0.0138357 Jy ! Total flux subtracted in 200 components = 0.0138357 Jy ! Clean residual min=-0.003959 max=0.002903 Jy/beam ! Clean residual mean=-0.000045 rms=0.001036 Jy/beam ! Combined flux in latest and established models = 0.199908 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000807295 Jy ! Component: 100 - total flux cleaned = 0.00147681 Jy ! Component: 150 - total flux cleaned = 0.0020343 Jy ! Component: 200 - total flux cleaned = 0.00246258 Jy ! Total flux subtracted in 200 components = 0.00246258 Jy ! Clean residual min=-0.003693 max=0.002729 Jy/beam ! Clean residual mean=-0.000029 rms=0.000944 Jy/beam ! Combined flux in latest and established models = 0.20237 Jy ! Adding 60 model components to the UV plane model. ! The established model now contains 133 components and 0.20237 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.94 mas, bmaj=7.551 mas, bpa=5.106 degrees ! Estimated noise=1141.84 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000372677 Jy ! Component: 100 - total flux cleaned = -0.00013808 Jy ! Component: 150 - total flux cleaned = 5.40223e-05 Jy ! Component: 200 - total flux cleaned = 0.000136903 Jy ! Total flux subtracted in 200 components = 0.000136903 Jy ! Clean residual min=-0.003567 max=0.003424 Jy/beam ! Clean residual mean=-0.000011 rms=0.000801 Jy/beam ! Combined flux in latest and established models = 0.202507 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 154 components and 0.202507 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104164Jy sigma=0.000764 ! Fit after self-cal, rms=0.104136Jy sigma=0.000763 wmodel J1259-2436_S_2015_01_22_pus_map.mod ! Writing 154 model components to file: J1259-2436_S_2015_01_22_pus_map.mod wobs J1259-2436_S_2015_01_22_pus_uvs.fits ! Writing UV FITS file: J1259-2436_S_2015_01_22_pus_uvs.fits wwins J1259-2436_S_2015_01_22_pus_map.win ! wwins: Wrote 3 windows to J1259-2436_S_2015_01_22_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000697419 Jy ! Component: 100 - total flux cleaned = -0.000910631 Jy ! Component: 150 - total flux cleaned = -0.00110368 Jy ! Component: 200 - total flux cleaned = -0.0013785 Jy ! Component: 250 - total flux cleaned = -0.00159781 Jy ! Component: 300 - total flux cleaned = -0.00180624 Jy ! Component: 350 - total flux cleaned = -0.00192618 Jy ! Component: 400 - total flux cleaned = -0.00200339 Jy ! Component: 450 - total flux cleaned = -0.00207821 Jy ! Component: 500 - total flux cleaned = -0.0021861 Jy ! Component: 550 - total flux cleaned = -0.00218564 Jy ! Component: 600 - total flux cleaned = -0.00232237 Jy ! Component: 650 - total flux cleaned = -0.00242192 Jy ! Component: 700 - total flux cleaned = -0.00255078 Jy ! Component: 750 - total flux cleaned = -0.0026758 Jy ! Component: 800 - total flux cleaned = -0.00282898 Jy ! Component: 850 - total flux cleaned = -0.00294796 Jy ! Component: 900 - total flux cleaned = -0.00306453 Jy ! Component: 950 - total flux cleaned = -0.00317849 Jy ! Component: 1000 - total flux cleaned = -0.00320577 Jy ! Component: 1050 - total flux cleaned = -0.0032329 Jy ! Component: 1100 - total flux cleaned = -0.00331328 Jy ! Component: 1150 - total flux cleaned = -0.00333935 Jy ! Component: 1200 - total flux cleaned = -0.00339058 Jy ! Component: 1250 - total flux cleaned = -0.00344118 Jy ! Component: 1300 - total flux cleaned = -0.00356479 Jy ! Component: 1350 - total flux cleaned = -0.00361301 Jy ! Component: 1400 - total flux cleaned = -0.00368408 Jy ! Component: 1450 - total flux cleaned = -0.00366079 Jy ! Component: 1500 - total flux cleaned = -0.00373065 Jy ! Component: 1550 - total flux cleaned = -0.00379955 Jy ! Component: 1600 - total flux cleaned = -0.00386663 Jy ! Component: 1650 - total flux cleaned = -0.00393255 Jy ! Component: 1700 - total flux cleaned = -0.00399751 Jy ! Component: 1750 - total flux cleaned = -0.00397626 Jy ! Component: 1800 - total flux cleaned = -0.00408149 Jy ! Component: 1850 - total flux cleaned = -0.004123 Jy ! Component: 1900 - total flux cleaned = -0.0041639 Jy ! Component: 1950 - total flux cleaned = -0.00416362 Jy ! Component: 2000 - total flux cleaned = -0.00414371 Jy ! Component: 2050 - total flux cleaned = -0.00412441 Jy ! Component: 2100 - total flux cleaned = -0.00414385 Jy ! Component: 2150 - total flux cleaned = -0.00414408 Jy ! Component: 2200 - total flux cleaned = -0.00416315 Jy ! Component: 2250 - total flux cleaned = -0.00414449 Jy ! Component: 2300 - total flux cleaned = -0.00410781 Jy ! Component: 2350 - total flux cleaned = -0.00407172 Jy ! Component: 2400 - total flux cleaned = -0.00407174 Jy ! Component: 2450 - total flux cleaned = -0.00410684 Jy ! Component: 2500 - total flux cleaned = -0.0040719 Jy ! Component: 2550 - total flux cleaned = -0.00407186 Jy ! Component: 2600 - total flux cleaned = -0.00400408 Jy ! Component: 2650 - total flux cleaned = -0.00392046 Jy ! Component: 2700 - total flux cleaned = -0.0039037 Jy ! Component: 2750 - total flux cleaned = -0.00387085 Jy ! Component: 2800 - total flux cleaned = -0.00380612 Jy ! Component: 2850 - total flux cleaned = -0.00378994 Jy ! Component: 2900 - total flux cleaned = -0.00372672 Jy ! Component: 2950 - total flux cleaned = -0.0037109 Jy ! Component: 3000 - total flux cleaned = -0.00366461 Jy ! Component: 3050 - total flux cleaned = -0.00368002 Jy ! Component: 3100 - total flux cleaned = -0.00374074 Jy ! Component: 3150 - total flux cleaned = -0.00375579 Jy ! Component: 3200 - total flux cleaned = -0.00381575 Jy ! Component: 3250 - total flux cleaned = -0.00387527 Jy ! Component: 3300 - total flux cleaned = -0.00387541 Jy ! Component: 3350 - total flux cleaned = -0.00393393 Jy ! Component: 3400 - total flux cleaned = -0.00397733 Jy ! Component: 3450 - total flux cleaned = -0.00399159 Jy ! Component: 3500 - total flux cleaned = -0.00402015 Jy ! Component: 3550 - total flux cleaned = -0.00403423 Jy ! Component: 3600 - total flux cleaned = -0.00402008 Jy ! Component: 3650 - total flux cleaned = -0.00407628 Jy ! Component: 3700 - total flux cleaned = -0.00409026 Jy ! Component: 3750 - total flux cleaned = -0.00409025 Jy ! Component: 3800 - total flux cleaned = -0.00411794 Jy ! Component: 3850 - total flux cleaned = -0.0040905 Jy ! Component: 3900 - total flux cleaned = -0.00409053 Jy ! Component: 3950 - total flux cleaned = -0.00411782 Jy ! Component: 4000 - total flux cleaned = -0.00415841 Jy ! Component: 4050 - total flux cleaned = -0.0041044 Jy ! Total flux subtracted in 4096 components = -0.00414465 Jy ! Clean residual min=-0.000792 max=0.000810 Jy/beam ! Clean residual mean=-0.000001 rms=0.000242 Jy/beam ! Combined flux in latest and established models = 0.198363 Jy keep ! Adding 272 model components to the UV plane model. ! The established model now contains 426 components and 0.198363 Jy ![Exited script file: muppet] wmap "J1259-2436_S_2015_01_22_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.94 x 7.551 at 5.106 degrees (North through East) ! Clean map min=-0.0032738 max=0.12093 Jy/beam ! Writing clean map to FITS file: J1259-2436_S_2015_01_22_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.120935 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000241718 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.599625 0.599625 1.19925 2.3985 4.797 9.594 19.188 38.376 76.752 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.12 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.94 x 7.551 at 5.106 degrees (North through East) ! Clean map min=-0.0032738 max=0.12093 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1259-2436_S_2015_01_22_pus_uvs.log closed on Tue Jan 3 22:53:21 2017