! Started logfile: J1258+0038_S_2014_08_05_pus_uvs.log on Sun Nov 13 17:27:54 2016
obs J1258+0038_S_2014_08_05_pus_uva.fits
! Reading UV FITS file: J1258+0038_S_2014_08_05_pus_uva.fits
! AN table 1: 122 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.69326 visibilities/baseline/integration-bin.
! Found source: J1258+0038
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23588e+09      3.2e+07          1      3.2e+07
!  02        2  2.26788e+09      3.2e+07          1      3.2e+07
!  03        3  2.29988e+09      3.2e+07          1      3.2e+07
!  04        4  2.36388e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 360 lines of history.
! 
! Reading 15224 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@muppet J1258+0038_S_2014_08_05_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 202 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 202 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 202 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 202 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.956940Jy  sigma=0.009915
! Fit after  self-cal, rms=0.928267Jy  sigma=0.009624
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.808 mas, bmaj=9.372 mas, bpa=15.46 degrees
! Estimated noise=740.66 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0581125 Jy
! Component: 100  -  total flux cleaned = 0.0708325 Jy
! Total flux subtracted in 100 components = 0.0708325 Jy
! Clean residual min=-0.003289 max=0.003790 Jy/beam
! Clean residual mean=-0.000011 rms=0.000846 Jy/beam
! Combined flux in latest and established models = 0.0708325 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.0708325 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082264Jy  sigma=0.000781
! Fit after  self-cal, rms=0.082215Jy  sigma=0.000781
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.69 mas, bmaj=10.73 mas, bpa=13.87 degrees
! Estimated noise=562.872 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00385288 Jy
! Component: 100  -  total flux cleaned = 0.00557066 Jy
! Component: 150  -  total flux cleaned = 0.00656996 Jy
! Component: 200  -  total flux cleaned = 0.00720964 Jy
! Total flux subtracted in 200 components = 0.00720964 Jy
! Clean residual min=-0.001996 max=0.001938 Jy/beam
! Clean residual mean=-0.000012 rms=0.000537 Jy/beam
! Combined flux in latest and established models = 0.0780422 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 18 components and 0.0780422 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082022Jy  sigma=0.000779
! Fit after  self-cal, rms=0.082022Jy  sigma=0.000779
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.88     HN        1.04     KP        1.06     
!   LA        1.09     MK        1.00*    NL        0.96     OV        1.00     
!   PT        1.04     SC        0.99     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.97     HN        1.04     KP        1.00     
!   LA        1.06     MK        1.00*    NL        1.04     OV        1.01     
!   PT        1.02     SC        0.97     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.89     FD        1.12     HN        1.05     KP        0.92     
!   LA        0.85     MK        1.00*    NL        0.99     OV        0.95     
!   PT        0.96     SC        1.07     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        1.09     HN        0.97     KP        0.91     
!   LA        0.80     MK        1.00*    NL        1.07     OV        1.00     
!   PT        1.00     SC        1.05     
! 
! 
! Fit before self-cal, rms=0.082022Jy  sigma=0.000779
! Fit after  self-cal, rms=0.079918Jy  sigma=0.000776
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.721 mas, bmaj=10.8 mas, bpa=13.86 degrees
! Estimated noise=560.701 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000943161 Jy
! Component: 100  -  total flux cleaned = -0.00119865 Jy
! Component: 150  -  total flux cleaned = -0.00127104 Jy
! Component: 200  -  total flux cleaned = -0.00130388 Jy
! Total flux subtracted in 200 components = -0.00130388 Jy
! Clean residual min=-0.001648 max=0.001870 Jy/beam
! Clean residual mean=-0.000007 rms=0.000453 Jy/beam
! Combined flux in latest and established models = 0.0767383 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 24 components and 0.0767383 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.079904Jy  sigma=0.000775
! Fit after  self-cal, rms=0.079894Jy  sigma=0.000775
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.079894Jy  sigma=0.000775
! Fit after  self-cal, rms=0.081218Jy  sigma=0.000774
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.712 mas, bmaj=10.79 mas, bpa=13.64 degrees
! Estimated noise=559.287 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000131515 Jy
! Component: 100  -  total flux cleaned = -0.00020662 Jy
! Component: 150  -  total flux cleaned = -0.000250962 Jy
! Component: 200  -  total flux cleaned = -0.000250966 Jy
! Total flux subtracted in 200 components = -0.000250966 Jy
! Clean residual min=-0.001376 max=0.001751 Jy/beam
! Clean residual mean=-0.000008 rms=0.000402 Jy/beam
! Combined flux in latest and established models = 0.0764873 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 31 components and 0.0764873 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081214Jy  sigma=0.000774
! Fit after  self-cal, rms=0.081272Jy  sigma=0.000774
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (9.5, -31).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00159764 Jy
! Component: 100  -  total flux cleaned = 0.0021276 Jy
! Component: 150  -  total flux cleaned = 0.0022253 Jy
! Component: 200  -  total flux cleaned = 0.00232657 Jy
! Total flux subtracted in 200 components = 0.00232657 Jy
! Clean residual min=-0.001206 max=0.001647 Jy/beam
! Clean residual mean=-0.000007 rms=0.000363 Jy/beam
! Combined flux in latest and established models = 0.0788139 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 49 components and 0.0788139 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081239Jy  sigma=0.000774
! Fit after  self-cal, rms=0.081232Jy  sigma=0.000774
! Inverting map 
! Added new window around map position (-127, -1).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00130997 Jy
! Component: 100  -  total flux cleaned = 0.00182938 Jy
! Component: 150  -  total flux cleaned = 0.00209255 Jy
! Component: 200  -  total flux cleaned = 0.00224415 Jy
! Total flux subtracted in 200 components = 0.00224415 Jy
! Clean residual min=-0.001191 max=0.001573 Jy/beam
! Clean residual mean=-0.000008 rms=0.000342 Jy/beam
! Combined flux in latest and established models = 0.081058 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 67 components and 0.081058 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081209Jy  sigma=0.000773
! Fit after  self-cal, rms=0.081207Jy  sigma=0.000773
! Inverting map 
! Added new window around map position (-126, 33.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00112017 Jy
! Component: 100  -  total flux cleaned = 0.00145864 Jy
! Component: 150  -  total flux cleaned = 0.00182792 Jy
! Component: 200  -  total flux cleaned = 0.00207659 Jy
! Total flux subtracted in 200 components = 0.00207659 Jy
! Clean residual min=-0.001170 max=0.001334 Jy/beam
! Clean residual mean=-0.000006 rms=0.000319 Jy/beam
! Combined flux in latest and established models = 0.0831346 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 89 components and 0.0831346 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081183Jy  sigma=0.000773
! Fit after  self-cal, rms=0.081175Jy  sigma=0.000773
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081175Jy  sigma=0.000773
! Fit after  self-cal, rms=0.081161Jy  sigma=0.000773
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.717 mas, bmaj=10.8 mas, bpa=13.67 degrees
! Estimated noise=557.285 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000622156 Jy
! Component: 100  -  total flux cleaned = 0.000829723 Jy
! Component: 150  -  total flux cleaned = 0.000921339 Jy
! Component: 200  -  total flux cleaned = 0.00100579 Jy
! Total flux subtracted in 200 components = 0.00100579 Jy
! Clean residual min=-0.001096 max=0.001236 Jy/beam
! Clean residual mean=-0.000005 rms=0.000304 Jy/beam
! Combined flux in latest and established models = 0.0841404 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 102 components and 0.0841404 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081152Jy  sigma=0.000773
! Fit after  self-cal, rms=0.081153Jy  sigma=0.000773
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000233788 Jy
! Component: 100  -  total flux cleaned = 0.000281987 Jy
! Component: 150  -  total flux cleaned = 0.000312071 Jy
! Component: 200  -  total flux cleaned = 0.00034046 Jy
! Total flux subtracted in 200 components = 0.00034046 Jy
! Clean residual min=-0.001077 max=0.001236 Jy/beam
! Clean residual mean=-0.000005 rms=0.000300 Jy/beam
! Combined flux in latest and established models = 0.0844809 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 112 components and 0.0844809 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081148Jy  sigma=0.000773
! Fit after  self-cal, rms=0.081147Jy  sigma=0.000773
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081147Jy  sigma=0.000773
! Fit after  self-cal, rms=0.081163Jy  sigma=0.000773
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.825 mas, bmaj=13.23 mas, bpa=6.808 degrees
! Estimated noise=622.037 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000164176 Jy
! Component: 100  -  total flux cleaned = 0.000253852 Jy
! Component: 150  -  total flux cleaned = 0.00033073 Jy
! Component: 200  -  total flux cleaned = 0.000365876 Jy
! Total flux subtracted in 200 components = 0.000365876 Jy
! Clean residual min=-0.001172 max=0.001231 Jy/beam
! Clean residual mean=-0.000008 rms=0.000325 Jy/beam
! Combined flux in latest and established models = 0.0848468 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 137 components and 0.0848467 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081159Jy  sigma=0.000773
! Fit after  self-cal, rms=0.081157Jy  sigma=0.000773
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000110801 Jy
! Component: 100  -  total flux cleaned = 0.000122001 Jy
! Component: 150  -  total flux cleaned = 0.000101327 Jy
! Component: 200  -  total flux cleaned = 8.19195e-05 Jy
! Total flux subtracted in 200 components = 8.19195e-05 Jy
! Clean residual min=-0.001165 max=0.001231 Jy/beam
! Clean residual mean=-0.000008 rms=0.000323 Jy/beam
! Combined flux in latest and established models = 0.0849287 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 149 components and 0.0849287 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081155Jy  sigma=0.000773
! Fit after  self-cal, rms=0.081153Jy  sigma=0.000773
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.718 mas, bmaj=10.81 mas, bpa=13.68 degrees
! Estimated noise=557.058 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.718 x 10.81 at 13.68 degrees (North through East)
! Clean map  min=-0.0010179  max=0.073874 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.805 mas, bmaj=9.378 mas, bpa=15.1 degrees
! Estimated noise=742.268 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0581248 Jy
! Component: 100  -  total flux cleaned = 0.0708811 Jy
! Component: 150  -  total flux cleaned = 0.0746902 Jy
! Component: 200  -  total flux cleaned = 0.0765596 Jy
! Total flux subtracted in 200 components = 0.0765596 Jy
! Clean residual min=-0.002529 max=0.002471 Jy/beam
! Clean residual mean=-0.000005 rms=0.000689 Jy/beam
! Combined flux in latest and established models = 0.0765596 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 20 model components to the UV plane model.
! The established model now contains 20 components and 0.0765596 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.718 mas, bmaj=10.81 mas, bpa=13.68 degrees
! Estimated noise=557.058 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00210112 Jy
! Component: 100  -  total flux cleaned = 0.00356035 Jy
! Component: 150  -  total flux cleaned = 0.00463924 Jy
! Component: 200  -  total flux cleaned = 0.00548177 Jy
! Total flux subtracted in 200 components = 0.00548177 Jy
! Clean residual min=-0.001266 max=0.001229 Jy/beam
! Clean residual mean=-0.000007 rms=0.000357 Jy/beam
! Combined flux in latest and established models = 0.0820414 Jy
! Adding 23 model components to the UV plane model.
! The established model now contains 42 components and 0.0820414 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.825 mas, bmaj=13.23 mas, bpa=6.808 degrees
! Estimated noise=622.037 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0010054 Jy
! Component: 100  -  total flux cleaned = 0.00156664 Jy
! Component: 150  -  total flux cleaned = 0.00196156 Jy
! Component: 200  -  total flux cleaned = 0.00217229 Jy
! Total flux subtracted in 200 components = 0.00217229 Jy
! Clean residual min=-0.001292 max=0.001347 Jy/beam
! Clean residual mean=-0.000009 rms=0.000362 Jy/beam
! Combined flux in latest and established models = 0.0842136 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.68067e-05 Jy
! Component: 100  -  total flux cleaned = 0.000167019 Jy
! Component: 150  -  total flux cleaned = 0.000185707 Jy
! Component: 200  -  total flux cleaned = 0.000202913 Jy
! Total flux subtracted in 200 components = 0.000202913 Jy
! Clean residual min=-0.001247 max=0.001314 Jy/beam
! Clean residual mean=-0.000009 rms=0.000350 Jy/beam
! Combined flux in latest and established models = 0.0844166 Jy
! Adding 53 model components to the UV plane model.
! The established model now contains 88 components and 0.0844166 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.718 mas, bmaj=10.81 mas, bpa=13.68 degrees
! Estimated noise=557.058 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.58283e-05 Jy
! Component: 100  -  total flux cleaned = -1.06723e-06 Jy
! Component: 150  -  total flux cleaned = -2.15576e-05 Jy
! Component: 200  -  total flux cleaned = -3.06677e-06 Jy
! Total flux subtracted in 200 components = -3.06677e-06 Jy
! Clean residual min=-0.001086 max=0.001228 Jy/beam
! Clean residual mean=-0.000005 rms=0.000312 Jy/beam
! Combined flux in latest and established models = 0.0844135 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 111 components and 0.0844135 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081168Jy  sigma=0.000773
! Fit after  self-cal, rms=0.081166Jy  sigma=0.000773
wmodel J1258+0038_S_2014_08_05_pus_map.mod
! Writing 111 model components to file: J1258+0038_S_2014_08_05_pus_map.mod
wobs J1258+0038_S_2014_08_05_pus_uvs.fits
! Writing UV FITS file: J1258+0038_S_2014_08_05_pus_uvs.fits
wwins J1258+0038_S_2014_08_05_pus_map.win
! wwins: Wrote 4 windows to J1258+0038_S_2014_08_05_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000178275 Jy
! Component: 100  -  total flux cleaned = 0.000141137 Jy
! Component: 150  -  total flux cleaned = -2.88745e-06 Jy
! Component: 200  -  total flux cleaned = -8.99935e-05 Jy
! Component: 250  -  total flux cleaned = -0.00017493 Jy
! Component: 300  -  total flux cleaned = -0.000256848 Jy
! Component: 350  -  total flux cleaned = -0.000336516 Jy
! Component: 400  -  total flux cleaned = -0.000352005 Jy
! Component: 450  -  total flux cleaned = -0.000412608 Jy
! Component: 500  -  total flux cleaned = -0.000456667 Jy
! Component: 550  -  total flux cleaned = -0.00047074 Jy
! Component: 600  -  total flux cleaned = -0.000470521 Jy
! Component: 650  -  total flux cleaned = -0.000456351 Jy
! Component: 700  -  total flux cleaned = -0.000442412 Jy
! Component: 750  -  total flux cleaned = -0.000402585 Jy
! Component: 800  -  total flux cleaned = -0.000415516 Jy
! Component: 850  -  total flux cleaned = -0.000415201 Jy
! Component: 900  -  total flux cleaned = -0.000402519 Jy
! Component: 950  -  total flux cleaned = -0.000426924 Jy
! Component: 1000  -  total flux cleaned = -0.000438925 Jy
! Component: 1050  -  total flux cleaned = -0.0004626 Jy
! Component: 1100  -  total flux cleaned = -0.000473962 Jy
! Component: 1150  -  total flux cleaned = -0.000462514 Jy
! Component: 1200  -  total flux cleaned = -0.000473847 Jy
! Component: 1250  -  total flux cleaned = -0.000484863 Jy
! Component: 1300  -  total flux cleaned = -0.000463139 Jy
! Component: 1350  -  total flux cleaned = -0.000495429 Jy
! Component: 1400  -  total flux cleaned = -0.0005165 Jy
! Component: 1450  -  total flux cleaned = -0.000474624 Jy
! Component: 1500  -  total flux cleaned = -0.000433161 Jy
! Component: 1550  -  total flux cleaned = -0.000392463 Jy
! Component: 1600  -  total flux cleaned = -0.000321785 Jy
! Component: 1650  -  total flux cleaned = -0.000272206 Jy
! Component: 1700  -  total flux cleaned = -0.000213469 Jy
! Component: 1750  -  total flux cleaned = -0.000223184 Jy
! Component: 1800  -  total flux cleaned = -0.000155864 Jy
! Component: 1850  -  total flux cleaned = -9.89902e-05 Jy
! Component: 1900  -  total flux cleaned = -6.14905e-05 Jy
! Component: 1950  -  total flux cleaned = -3.3801e-05 Jy
! Component: 2000  -  total flux cleaned = 3.02884e-05 Jy
! Component: 2050  -  total flux cleaned = 4.82129e-05 Jy
! Component: 2100  -  total flux cleaned = 7.51793e-05 Jy
! Component: 2150  -  total flux cleaned = 0.000128393 Jy
! Component: 2200  -  total flux cleaned = 0.000163532 Jy
! Component: 2250  -  total flux cleaned = 0.000180981 Jy
! Component: 2300  -  total flux cleaned = 0.00023286 Jy
! Component: 2350  -  total flux cleaned = 0.00028413 Jy
! Component: 2400  -  total flux cleaned = 0.00034326 Jy
! Component: 2450  -  total flux cleaned = 0.000368453 Jy
! Component: 2500  -  total flux cleaned = 0.000409947 Jy
! Component: 2550  -  total flux cleaned = 0.000451053 Jy
! Component: 2600  -  total flux cleaned = 0.000459238 Jy
! Component: 2650  -  total flux cleaned = 0.00048345 Jy
! Component: 2700  -  total flux cleaned = 0.000499411 Jy
! Component: 2750  -  total flux cleaned = 0.000515265 Jy
! Component: 2800  -  total flux cleaned = 0.000530996 Jy
! Component: 2850  -  total flux cleaned = 0.000538702 Jy
! Component: 2900  -  total flux cleaned = 0.000531 Jy
! Component: 2950  -  total flux cleaned = 0.000523373 Jy
! Component: 3000  -  total flux cleaned = 0.000523476 Jy
! Component: 3050  -  total flux cleaned = 0.000546102 Jy
! Component: 3100  -  total flux cleaned = 0.000560955 Jy
! Component: 3150  -  total flux cleaned = 0.000568286 Jy
! Component: 3200  -  total flux cleaned = 0.000575684 Jy
! Component: 3250  -  total flux cleaned = 0.000597535 Jy
! Component: 3300  -  total flux cleaned = 0.000612119 Jy
! Component: 3350  -  total flux cleaned = 0.000619369 Jy
! Component: 3400  -  total flux cleaned = 0.000676429 Jy
! Component: 3450  -  total flux cleaned = 0.000676382 Jy
! Component: 3500  -  total flux cleaned = 0.000669311 Jy
! Component: 3550  -  total flux cleaned = 0.000690294 Jy
! Component: 3600  -  total flux cleaned = 0.000724998 Jy
! Component: 3650  -  total flux cleaned = 0.000711224 Jy
! Component: 3700  -  total flux cleaned = 0.000724929 Jy
! Component: 3750  -  total flux cleaned = 0.000724993 Jy
! Component: 3800  -  total flux cleaned = 0.000745338 Jy
! Component: 3850  -  total flux cleaned = 0.000752098 Jy
! Component: 3900  -  total flux cleaned = 0.000758813 Jy
! Component: 3950  -  total flux cleaned = 0.000765379 Jy
! Component: 4000  -  total flux cleaned = 0.000758752 Jy
! Component: 4050  -  total flux cleaned = 0.000765324 Jy
! Total flux subtracted in 4096 components = 0.000752265 Jy
! Clean residual min=-0.000491 max=0.000354 Jy/beam
! Clean residual mean=-0.000002 rms=0.000124 Jy/beam
! Combined flux in latest and established models = 0.0851657 Jy
keep
! Adding 298 model components to the UV plane model.
! The established model now contains 409 components and 0.0851657 Jy
![Exited script file: muppet]
wmap "J1258+0038_S_2014_08_05_pus\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.718 x 10.81 at 13.68 degrees (North through East)
! Clean map  min=-0.0010048  max=0.073763 Jy/beam
! Writing clean map to FITS file: J1258+0038_S_2014_08_05_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0737633 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000120834 
device "J1258+0038_S_2014_08_05_pus\_map.eps/VPS"
! Attempting to open device: 'J1258+0038_S_2014_08_05_pus_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.491441 0.491441 0.982883 1.96577 3.93153 7.86306 15.7261 31.4522 62.9045
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0003 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.073 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.718 x 10.81 at 13.68 degrees (North through East)
! Clean map  min=-0.0010048  max=0.073763 Jy/beam
quit
! Quitting program
! Log file J1258+0038_S_2014_08_05_pus_uvs.log closed on Sun Nov 13 17:28:00 2016