! Started logfile: J1254-4424_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:27:14 2017 obs J1254-4424_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J1254-4424_S_2014_01_04_pus_uva.fits ! AN table 1: 125 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.347778 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1254-4424 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 6260 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1254-4424_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 437 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 437 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 437 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 437 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.911539Jy sigma=0.006298 ! Fit after self-cal, rms=0.838318Jy sigma=0.005815 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.35 mas, bmaj=7.781 mas, bpa=2.664 degrees ! Estimated noise=1797.69 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.129564 Jy ! Component: 100 - total flux cleaned = 0.165118 Jy ! Total flux subtracted in 100 components = 0.165118 Jy ! Clean residual min=-0.014071 max=0.021206 Jy/beam ! Clean residual mean=0.000011 rms=0.004616 Jy/beam ! Combined flux in latest and established models = 0.165118 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.165118 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125836Jy sigma=0.000817 ! Fit after self-cal, rms=0.125597Jy sigma=0.000816 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.835 mas, bmaj=8.982 mas, bpa=0.6487 degrees ! Estimated noise=1296.78 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0249207 Jy ! Component: 100 - total flux cleaned = 0.0377557 Jy ! Component: 150 - total flux cleaned = 0.0444329 Jy ! Component: 200 - total flux cleaned = 0.0467972 Jy ! Total flux subtracted in 200 components = 0.0467972 Jy ! Clean residual min=-0.009868 max=0.018200 Jy/beam ! Clean residual mean=-0.000066 rms=0.003815 Jy/beam ! Combined flux in latest and established models = 0.211915 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 21 components and 0.211915 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121716Jy sigma=0.000776 ! Fit after self-cal, rms=0.121593Jy sigma=0.000775 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.85 KP 1.00* LA 1.00 ! MK 0.96 NL 1.55 OV 1.01 PT 0.99 ! SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 KP 1.00* LA 0.94 ! MK 0.99 NL 1.50 OV 1.03 PT 0.97 ! SC 0.96 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.17 KP 1.00* LA 0.78 ! MK 1.05 NL 1.70 OV 0.91 PT 0.96 ! SC 1.29 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 KP 1.00* LA 0.87 ! MK 1.00 NL 1.75 OV 1.01 PT 0.95 ! SC 0.99 ! ! ! Fit before self-cal, rms=0.121593Jy sigma=0.000775 ! Fit after self-cal, rms=0.137811Jy sigma=0.000747 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.837 mas, bmaj=8.94 mas, bpa=0.3807 degrees ! Estimated noise=1302.39 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (9, -0.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00790448 Jy ! Component: 100 - total flux cleaned = 0.00793311 Jy ! Component: 150 - total flux cleaned = 0.00735969 Jy ! Component: 200 - total flux cleaned = 0.00697681 Jy ! Total flux subtracted in 200 components = 0.00697681 Jy ! Clean residual min=-0.004807 max=0.005010 Jy/beam ! Clean residual mean=-0.000012 rms=0.001137 Jy/beam ! Combined flux in latest and established models = 0.218892 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 41 components and 0.218892 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137340Jy sigma=0.000742 ! Fit after self-cal, rms=0.138593Jy sigma=0.000740 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.138593Jy sigma=0.000740 ! Fit after self-cal, rms=0.141792Jy sigma=0.000738 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.808 mas, bmaj=8.851 mas, bpa=0.4142 degrees ! Estimated noise=1290.01 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00208331 Jy ! Component: 100 - total flux cleaned = 0.00195295 Jy ! Component: 150 - total flux cleaned = 0.00169767 Jy ! Component: 200 - total flux cleaned = 0.0014928 Jy ! Total flux subtracted in 200 components = 0.0014928 Jy ! Clean residual min=-0.003538 max=0.003401 Jy/beam ! Clean residual mean=-0.000043 rms=0.000827 Jy/beam ! Combined flux in latest and established models = 0.220385 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 59 components and 0.220385 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141721Jy sigma=0.000737 ! Fit after self-cal, rms=0.141917Jy sigma=0.000737 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000189307 Jy ! Component: 100 - total flux cleaned = -3.08353e-05 Jy ! Component: 150 - total flux cleaned = -0.0001868 Jy ! Component: 200 - total flux cleaned = -0.000269913 Jy ! Total flux subtracted in 200 components = -0.000269913 Jy ! Clean residual min=-0.003560 max=0.003389 Jy/beam ! Clean residual mean=-0.000041 rms=0.000800 Jy/beam ! Combined flux in latest and established models = 0.220115 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 69 components and 0.220115 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141896Jy sigma=0.000737 ! Fit after self-cal, rms=0.141915Jy sigma=0.000737 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141915Jy sigma=0.000737 ! Fit after self-cal, rms=0.142002Jy sigma=0.000737 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.799 mas, bmaj=8.82 mas, bpa=0.4643 degrees ! Estimated noise=1284.93 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000543371 Jy ! Component: 100 - total flux cleaned = 0.000625694 Jy ! Component: 150 - total flux cleaned = 0.000624976 Jy ! Component: 200 - total flux cleaned = 0.00058318 Jy ! Total flux subtracted in 200 components = 0.00058318 Jy ! Clean residual min=-0.003435 max=0.003308 Jy/beam ! Clean residual mean=-0.000024 rms=0.000770 Jy/beam ! Combined flux in latest and established models = 0.220698 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 80 components and 0.220698 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141987Jy sigma=0.000737 ! Fit after self-cal, rms=0.142008Jy sigma=0.000737 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000148726 Jy ! Component: 100 - total flux cleaned = 0.000125782 Jy ! Component: 150 - total flux cleaned = 0.000104252 Jy ! Component: 200 - total flux cleaned = 6.43599e-05 Jy ! Total flux subtracted in 200 components = 6.43599e-05 Jy ! Clean residual min=-0.003414 max=0.003271 Jy/beam ! Clean residual mean=-0.000024 rms=0.000766 Jy/beam ! Combined flux in latest and established models = 0.220762 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 81 components and 0.220762 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141997Jy sigma=0.000737 ! Fit after self-cal, rms=0.142007Jy sigma=0.000737 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.142007Jy sigma=0.000737 ! Fit after self-cal, rms=0.141519Jy sigma=0.000737 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.775 mas, bmaj=29.8 mas, bpa=-0.08198 degrees ! Estimated noise=1699.66 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000195254 Jy ! Component: 100 - total flux cleaned = 0.000230461 Jy ! Component: 150 - total flux cleaned = 0.000246567 Jy ! Component: 200 - total flux cleaned = 0.000246722 Jy ! Total flux subtracted in 200 components = 0.000246722 Jy ! Clean residual min=-0.002877 max=0.002940 Jy/beam ! Clean residual mean=-0.000040 rms=0.000876 Jy/beam ! Combined flux in latest and established models = 0.221009 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 91 components and 0.221009 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141512Jy sigma=0.000737 ! Fit after self-cal, rms=0.141513Jy sigma=0.000737 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.45987e-05 Jy ! Component: 100 - total flux cleaned = -1.5687e-05 Jy ! Component: 150 - total flux cleaned = -5.52629e-07 Jy ! Component: 200 - total flux cleaned = 1.32305e-05 Jy ! Total flux subtracted in 200 components = 1.32305e-05 Jy ! Clean residual min=-0.002844 max=0.002908 Jy/beam ! Clean residual mean=-0.000040 rms=0.000873 Jy/beam ! Combined flux in latest and established models = 0.221022 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 94 components and 0.221022 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141508Jy sigma=0.000737 ! Fit after self-cal, rms=0.141523Jy sigma=0.000737 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.796 mas, bmaj=8.809 mas, bpa=0.5019 degrees ! Estimated noise=1283.25 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.796 x 8.809 at 0.5019 degrees (North through East) ! Clean map min=-0.0032659 max=0.15623 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.317 mas, bmaj=7.613 mas, bpa=2.631 degrees ! Estimated noise=1765.26 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.126776 Jy ! Component: 100 - total flux cleaned = 0.164068 Jy ! Component: 150 - total flux cleaned = 0.182353 Jy ! Component: 200 - total flux cleaned = 0.193703 Jy ! Total flux subtracted in 200 components = 0.193703 Jy ! Clean residual min=-0.007487 max=0.007492 Jy/beam ! Clean residual mean=-0.000007 rms=0.002130 Jy/beam ! Combined flux in latest and established models = 0.193703 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 31 model components to the UV plane model. ! The established model now contains 31 components and 0.193703 Jy ! Inverting map and beam ! Estimated beam: bmin=2.796 mas, bmaj=8.809 mas, bpa=0.5019 degrees ! Estimated noise=1283.25 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0114447 Jy ! Component: 100 - total flux cleaned = 0.0180775 Jy ! Component: 150 - total flux cleaned = 0.0220965 Jy ! Component: 200 - total flux cleaned = 0.0244018 Jy ! Total flux subtracted in 200 components = 0.0244018 Jy ! Clean residual min=-0.003593 max=0.003055 Jy/beam ! Clean residual mean=-0.000008 rms=0.000857 Jy/beam ! Combined flux in latest and established models = 0.218105 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 56 components and 0.218105 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.775 mas, bmaj=29.8 mas, bpa=-0.08198 degrees ! Estimated noise=1699.66 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00184996 Jy ! Component: 100 - total flux cleaned = 0.00197806 Jy ! Component: 150 - total flux cleaned = 0.00211979 Jy ! Component: 200 - total flux cleaned = 0.00220969 Jy ! Total flux subtracted in 200 components = 0.00220969 Jy ! Clean residual min=-0.002947 max=0.002836 Jy/beam ! Clean residual mean=-0.000036 rms=0.000898 Jy/beam ! Combined flux in latest and established models = 0.220315 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000101906 Jy ! Component: 100 - total flux cleaned = 0.000148378 Jy ! Component: 150 - total flux cleaned = 0.000191309 Jy ! Component: 200 - total flux cleaned = 0.000230379 Jy ! Total flux subtracted in 200 components = 0.000230379 Jy ! Clean residual min=-0.002791 max=0.002855 Jy/beam ! Clean residual mean=-0.000038 rms=0.000885 Jy/beam ! Combined flux in latest and established models = 0.220545 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 70 components and 0.220545 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.796 mas, bmaj=8.809 mas, bpa=0.5019 degrees ! Estimated noise=1283.25 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.9878e-05 Jy ! Component: 100 - total flux cleaned = 2.99028e-05 Jy ! Component: 150 - total flux cleaned = 6.2983e-05 Jy ! Component: 200 - total flux cleaned = 6.2337e-05 Jy ! Total flux subtracted in 200 components = 6.2337e-05 Jy ! Clean residual min=-0.003150 max=0.003097 Jy/beam ! Clean residual mean=-0.000018 rms=0.000752 Jy/beam ! Combined flux in latest and established models = 0.220608 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 83 components and 0.220608 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141504Jy sigma=0.000737 ! Fit after self-cal, rms=0.141551Jy sigma=0.000737 wmodel J1254-4424_S_2014_01_04_pus_map.mod ! Writing 83 model components to file: J1254-4424_S_2014_01_04_pus_map.mod wobs J1254-4424_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J1254-4424_S_2014_01_04_pus_uvs.fits wwins J1254-4424_S_2014_01_04_pus_map.win ! wwins: Wrote 2 windows to J1254-4424_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000607191 Jy ! Component: 100 - total flux cleaned = -0.000407785 Jy ! Component: 150 - total flux cleaned = -0.000174126 Jy ! Component: 200 - total flux cleaned = -8.9261e-05 Jy ! Component: 250 - total flux cleaned = -8.9204e-05 Jy ! Component: 300 - total flux cleaned = -0.000200453 Jy ! Component: 350 - total flux cleaned = -0.000271696 Jy ! Component: 400 - total flux cleaned = -0.000510934 Jy ! Component: 450 - total flux cleaned = -0.000771626 Jy ! Component: 500 - total flux cleaned = -0.000991855 Jy ! Component: 550 - total flux cleaned = -0.00123677 Jy ! Component: 600 - total flux cleaned = -0.00147418 Jy ! Component: 650 - total flux cleaned = -0.0016465 Jy ! Component: 700 - total flux cleaned = -0.00178638 Jy ! Component: 750 - total flux cleaned = -0.00192352 Jy ! Component: 800 - total flux cleaned = -0.00213764 Jy ! Component: 850 - total flux cleaned = -0.00226842 Jy ! Component: 900 - total flux cleaned = -0.00234502 Jy ! Component: 950 - total flux cleaned = -0.00239591 Jy ! Component: 1000 - total flux cleaned = -0.0023709 Jy ! Component: 1050 - total flux cleaned = -0.00232213 Jy ! Component: 1100 - total flux cleaned = -0.00232191 Jy ! Component: 1150 - total flux cleaned = -0.0022038 Jy ! Component: 1200 - total flux cleaned = -0.00215759 Jy ! Component: 1250 - total flux cleaned = -0.00211177 Jy ! Component: 1300 - total flux cleaned = -0.00197675 Jy ! Component: 1350 - total flux cleaned = -0.00188819 Jy ! Component: 1400 - total flux cleaned = -0.00182241 Jy ! Component: 1450 - total flux cleaned = -0.00173639 Jy ! Component: 1500 - total flux cleaned = -0.00160892 Jy ! Component: 1550 - total flux cleaned = -0.00154603 Jy ! Component: 1600 - total flux cleaned = -0.0014634 Jy ! Component: 1650 - total flux cleaned = -0.00138153 Jy ! Component: 1700 - total flux cleaned = -0.0013208 Jy ! Component: 1750 - total flux cleaned = -0.00124049 Jy ! Component: 1800 - total flux cleaned = -0.00114154 Jy ! Component: 1850 - total flux cleaned = -0.0010829 Jy ! Component: 1900 - total flux cleaned = -0.000986036 Jy ! Component: 1950 - total flux cleaned = -0.000928496 Jy ! Component: 2000 - total flux cleaned = -0.000833471 Jy ! Component: 2050 - total flux cleaned = -0.000758294 Jy ! Component: 2100 - total flux cleaned = -0.000758368 Jy ! Component: 2150 - total flux cleaned = -0.00072105 Jy ! Component: 2200 - total flux cleaned = -0.000646994 Jy ! Component: 2250 - total flux cleaned = -0.000555085 Jy ! Component: 2300 - total flux cleaned = -0.000481885 Jy ! Component: 2350 - total flux cleaned = -0.000427331 Jy ! Component: 2400 - total flux cleaned = -0.000373057 Jy ! Component: 2450 - total flux cleaned = -0.000318974 Jy ! Component: 2500 - total flux cleaned = -0.000283021 Jy ! Component: 2550 - total flux cleaned = -0.000247116 Jy ! Component: 2600 - total flux cleaned = -0.000193601 Jy ! Component: 2650 - total flux cleaned = -0.000104787 Jy ! Component: 2700 - total flux cleaned = -8.70889e-05 Jy ! Component: 2750 - total flux cleaned = -3.39962e-05 Jy ! Component: 2800 - total flux cleaned = 3.6473e-05 Jy ! Component: 2850 - total flux cleaned = 5.40568e-05 Jy ! Component: 2900 - total flux cleaned = 0.00014152 Jy ! Component: 2950 - total flux cleaned = 0.000176427 Jy ! Component: 3000 - total flux cleaned = 0.000245984 Jy ! Component: 3050 - total flux cleaned = 0.00024598 Jy ! Component: 3100 - total flux cleaned = 0.000280574 Jy ! Component: 3150 - total flux cleaned = 0.000263287 Jy ! Component: 3200 - total flux cleaned = 0.00028054 Jy ! Component: 3250 - total flux cleaned = 0.000332433 Jy ! Component: 3300 - total flux cleaned = 0.000349615 Jy ! Component: 3350 - total flux cleaned = 0.000349622 Jy ! Component: 3400 - total flux cleaned = 0.000401414 Jy ! Component: 3450 - total flux cleaned = 0.00041868 Jy ! Component: 3500 - total flux cleaned = 0.000401436 Jy ! Component: 3550 - total flux cleaned = 0.000453156 Jy ! Component: 3600 - total flux cleaned = 0.00045322 Jy ! Component: 3650 - total flux cleaned = 0.000505094 Jy ! Component: 3700 - total flux cleaned = 0.000539761 Jy ! Component: 3750 - total flux cleaned = 0.000557094 Jy ! Component: 3800 - total flux cleaned = 0.000626467 Jy ! Component: 3850 - total flux cleaned = 0.000661186 Jy ! Component: 3900 - total flux cleaned = 0.000713351 Jy ! Component: 3950 - total flux cleaned = 0.000695942 Jy ! Component: 4000 - total flux cleaned = 0.000730815 Jy ! Component: 4050 - total flux cleaned = 0.000713367 Jy ! Total flux subtracted in 4096 components = 0.000713401 Jy ! Clean residual min=-0.000966 max=0.001024 Jy/beam ! Clean residual mean=0.000014 rms=0.000280 Jy/beam ! Combined flux in latest and established models = 0.221321 Jy keep ! Adding 211 model components to the UV plane model. ! The established model now contains 294 components and 0.221321 Jy ![Exited script file: muppet] wmap "J1254-4424_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.796 x 8.809 at 0.5019 degrees (North through East) ! Clean map min=-0.0030647 max=0.16204 Jy/beam ! Writing clean map to FITS file: J1254-4424_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.162037 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00027501 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.50916 0.50916 1.01832 2.03664 4.07328 8.14655 16.2931 32.5862 65.1724 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.162 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.796 x 8.809 at 0.5019 degrees (North through East) ! Clean map min=-0.0030647 max=0.16204 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1254-4424_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:27:19 2017