! Started logfile: J1254-2000_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:27:09 2017 obs J1254-2000_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J1254-2000_S_2014_01_04_pus_uva.fits ! AN table 1: 85 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.777778 visibilities/baseline/integration-bin. ! Found source: J1254-2000 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 9520 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1254-2000_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 85 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 85 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 85 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 85 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.971185Jy sigma=0.011147 ! Fit after self-cal, rms=0.941221Jy sigma=0.010799 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.443 mas, bmaj=5.765 mas, bpa=-1.276 degrees ! Estimated noise=1056.66 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0467872 Jy ! Component: 100 - total flux cleaned = 0.0582472 Jy ! Total flux subtracted in 100 components = 0.0582472 Jy ! Clean residual min=-0.005189 max=0.004842 Jy/beam ! Clean residual mean=-0.000015 rms=0.001050 Jy/beam ! Combined flux in latest and established models = 0.0582472 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0582472 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084641Jy sigma=0.000863 ! Fit after self-cal, rms=0.084502Jy sigma=0.000861 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.08 mas, bmaj=7.065 mas, bpa=-0.2759 degrees ! Estimated noise=664.298 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00748756 Jy ! Component: 100 - total flux cleaned = 0.0110022 Jy ! Component: 150 - total flux cleaned = 0.0128313 Jy ! Component: 200 - total flux cleaned = 0.013823 Jy ! Total flux subtracted in 200 components = 0.013823 Jy ! Clean residual min=-0.003205 max=0.002814 Jy/beam ! Clean residual mean=-0.000009 rms=0.000680 Jy/beam ! Combined flux in latest and established models = 0.0720701 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 32 components and 0.0720702 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083945Jy sigma=0.000853 ! Fit after self-cal, rms=0.084045Jy sigma=0.000853 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.85 KP 1.00* LA 1.13 ! MK 1.08 NL 0.96 OV 1.01 PT 1.02 ! SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.95 KP 1.00* LA 1.05 ! MK 0.96 NL 1.09 OV 0.99 PT 1.03 ! SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 1.20 KP 1.00* LA 0.86 ! MK 0.98 NL 0.98 OV 0.96 PT 1.01 ! SC 1.03 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.07 KP 1.00* LA 0.89 ! MK 1.08 NL 1.21 OV 1.04 PT 1.09 ! SC 1.04 ! ! ! Fit before self-cal, rms=0.084045Jy sigma=0.000853 ! Fit after self-cal, rms=0.085263Jy sigma=0.000849 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.101 mas, bmaj=7.053 mas, bpa=0.1322 degrees ! Estimated noise=665.344 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000849032 Jy ! Component: 100 - total flux cleaned = 0.000989247 Jy ! Component: 150 - total flux cleaned = 0.0011384 Jy ! Component: 200 - total flux cleaned = 0.00124951 Jy ! Total flux subtracted in 200 components = 0.00124951 Jy ! Clean residual min=-0.002576 max=0.002570 Jy/beam ! Clean residual mean=-0.000008 rms=0.000634 Jy/beam ! Combined flux in latest and established models = 0.0733197 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 40 components and 0.0733197 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085231Jy sigma=0.000849 ! Fit after self-cal, rms=0.085703Jy sigma=0.000848 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085703Jy sigma=0.000848 ! Fit after self-cal, rms=0.088037Jy sigma=0.000846 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.093 mas, bmaj=7.041 mas, bpa=0.4676 degrees ! Estimated noise=671.058 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00136707 Jy ! Component: 100 - total flux cleaned = 0.00153038 Jy ! Component: 150 - total flux cleaned = 0.00166883 Jy ! Component: 200 - total flux cleaned = 0.00179415 Jy ! Total flux subtracted in 200 components = 0.00179415 Jy ! Clean residual min=-0.002166 max=0.002282 Jy/beam ! Clean residual mean=-0.000010 rms=0.000545 Jy/beam ! Combined flux in latest and established models = 0.0751138 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 44 components and 0.0751138 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087991Jy sigma=0.000845 ! Fit after self-cal, rms=0.088314Jy sigma=0.000845 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.69808e-05 Jy ! Component: 100 - total flux cleaned = 0.000110415 Jy ! Component: 150 - total flux cleaned = 0.000178411 Jy ! Component: 200 - total flux cleaned = 0.000262104 Jy ! Total flux subtracted in 200 components = 0.000262104 Jy ! Clean residual min=-0.002449 max=0.002246 Jy/beam ! Clean residual mean=-0.000009 rms=0.000549 Jy/beam ! Combined flux in latest and established models = 0.0753759 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 51 components and 0.0753759 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088294Jy sigma=0.000845 ! Fit after self-cal, rms=0.088314Jy sigma=0.000845 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088314Jy sigma=0.000845 ! Fit after self-cal, rms=0.089897Jy sigma=0.000845 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.077 mas, bmaj=7.011 mas, bpa=0.7834 degrees ! Estimated noise=672.834 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00126219 Jy ! Component: 100 - total flux cleaned = 0.00141442 Jy ! Component: 150 - total flux cleaned = 0.00158932 Jy ! Component: 200 - total flux cleaned = 0.00169933 Jy ! Total flux subtracted in 200 components = 0.00169933 Jy ! Clean residual min=-0.002050 max=0.002113 Jy/beam ! Clean residual mean=-0.000011 rms=0.000532 Jy/beam ! Combined flux in latest and established models = 0.0770752 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 52 components and 0.0770752 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089858Jy sigma=0.000844 ! Fit after self-cal, rms=0.090120Jy sigma=0.000844 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.05431e-05 Jy ! Component: 100 - total flux cleaned = 0.000116581 Jy ! Component: 150 - total flux cleaned = 0.000177068 Jy ! Component: 200 - total flux cleaned = 0.000233494 Jy ! Total flux subtracted in 200 components = 0.000233494 Jy ! Clean residual min=-0.002190 max=0.002128 Jy/beam ! Clean residual mean=-0.000010 rms=0.000532 Jy/beam ! Combined flux in latest and established models = 0.0773087 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 54 components and 0.0773087 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090102Jy sigma=0.000844 ! Fit after self-cal, rms=0.090114Jy sigma=0.000844 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090114Jy sigma=0.000844 ! Fit after self-cal, rms=0.090938Jy sigma=0.000844 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.957 mas, bmaj=16.57 mas, bpa=13.38 degrees ! Estimated noise=842.63 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0010379 Jy ! Component: 100 - total flux cleaned = 0.00113669 Jy ! Component: 150 - total flux cleaned = 0.00119883 Jy ! Component: 200 - total flux cleaned = 0.0012542 Jy ! Total flux subtracted in 200 components = 0.0012542 Jy ! Clean residual min=-0.002403 max=0.002553 Jy/beam ! Clean residual mean=-0.000024 rms=0.000718 Jy/beam ! Combined flux in latest and established models = 0.0785629 Jy selfcal ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 58 components and 0.0785629 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090910Jy sigma=0.000844 ! Fit after self-cal, rms=0.091040Jy sigma=0.000844 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.10848e-05 Jy ! Component: 100 - total flux cleaned = 6.63395e-06 Jy ! Component: 150 - total flux cleaned = 5.56742e-05 Jy ! Component: 200 - total flux cleaned = 8.42986e-05 Jy ! Total flux subtracted in 200 components = 8.42986e-05 Jy ! Clean residual min=-0.002416 max=0.002490 Jy/beam ! Clean residual mean=-0.000023 rms=0.000708 Jy/beam ! Combined flux in latest and established models = 0.0786472 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 60 components and 0.0786472 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091032Jy sigma=0.000844 ! Fit after self-cal, rms=0.091020Jy sigma=0.000844 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.06 mas, bmaj=6.98 mas, bpa=1.115 degrees ! Estimated noise=674.027 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.06 x 6.98 at 1.115 degrees (North through East) ! Clean map min=-0.0020762 max=0.058684 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.44 mas, bmaj=5.707 mas, bpa=-0.2265 degrees ! Estimated noise=1072.69 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0462735 Jy ! Component: 100 - total flux cleaned = 0.0593442 Jy ! Component: 150 - total flux cleaned = 0.066556 Jy ! Component: 200 - total flux cleaned = 0.0711649 Jy ! Total flux subtracted in 200 components = 0.0711649 Jy ! Clean residual min=-0.004183 max=0.003646 Jy/beam ! Clean residual mean=-0.000011 rms=0.000853 Jy/beam ! Combined flux in latest and established models = 0.0711649 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.0711649 Jy ! Inverting map and beam ! Estimated beam: bmin=3.06 mas, bmaj=6.98 mas, bpa=1.115 degrees ! Estimated noise=674.027 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00379691 Jy ! Component: 100 - total flux cleaned = 0.00583436 Jy ! Component: 150 - total flux cleaned = 0.00675282 Jy ! Component: 200 - total flux cleaned = 0.00699774 Jy ! Total flux subtracted in 200 components = 0.00699774 Jy ! Clean residual min=-0.002175 max=0.002286 Jy/beam ! Clean residual mean=-0.000012 rms=0.000541 Jy/beam ! Combined flux in latest and established models = 0.0781626 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 32 components and 0.0781626 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.957 mas, bmaj=16.57 mas, bpa=13.38 degrees ! Estimated noise=842.63 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000266661 Jy ! Component: 100 - total flux cleaned = 0.000309959 Jy ! Component: 150 - total flux cleaned = 0.00036617 Jy ! Component: 200 - total flux cleaned = 0.000414185 Jy ! Total flux subtracted in 200 components = 0.000414185 Jy ! Clean residual min=-0.002416 max=0.002498 Jy/beam ! Clean residual mean=-0.000024 rms=0.000710 Jy/beam ! Combined flux in latest and established models = 0.0785768 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.21953e-05 Jy ! Component: 100 - total flux cleaned = 7.92806e-05 Jy ! Component: 150 - total flux cleaned = 0.000111918 Jy ! Component: 200 - total flux cleaned = 0.000130881 Jy ! Total flux subtracted in 200 components = 0.000130881 Jy ! Clean residual min=-0.002422 max=0.002423 Jy/beam ! Clean residual mean=-0.000023 rms=0.000706 Jy/beam ! Combined flux in latest and established models = 0.0787077 Jy ! Adding 9 model components to the UV plane model. ! The established model now contains 39 components and 0.0787077 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.06 mas, bmaj=6.98 mas, bpa=1.115 degrees ! Estimated noise=674.027 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.95064e-06 Jy ! Component: 100 - total flux cleaned = -8.54675e-06 Jy ! Component: 150 - total flux cleaned = 1.09173e-05 Jy ! Component: 200 - total flux cleaned = 6.56514e-05 Jy ! Total flux subtracted in 200 components = 6.56514e-05 Jy ! Clean residual min=-0.002191 max=0.002091 Jy/beam ! Clean residual mean=-0.000011 rms=0.000534 Jy/beam ! Combined flux in latest and established models = 0.0787733 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 45 components and 0.0787733 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091000Jy sigma=0.000844 ! Fit after self-cal, rms=0.091025Jy sigma=0.000844 wmodel J1254-2000_S_2014_01_04_pus_map.mod ! Writing 45 model components to file: J1254-2000_S_2014_01_04_pus_map.mod wobs J1254-2000_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J1254-2000_S_2014_01_04_pus_uvs.fits wwins J1254-2000_S_2014_01_04_pus_map.win ! wwins: Wrote 1 windows to J1254-2000_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000168389 Jy ! Component: 100 - total flux cleaned = -0.000204297 Jy ! Component: 150 - total flux cleaned = -0.000238297 Jy ! Component: 200 - total flux cleaned = -0.000303216 Jy ! Component: 250 - total flux cleaned = -0.000397656 Jy ! Component: 300 - total flux cleaned = -0.000459818 Jy ! Component: 350 - total flux cleaned = -0.000577649 Jy ! Component: 400 - total flux cleaned = -0.000662059 Jy ! Component: 450 - total flux cleaned = -0.000717742 Jy ! Component: 500 - total flux cleaned = -0.000744102 Jy ! Component: 550 - total flux cleaned = -0.000743707 Jy ! Component: 600 - total flux cleaned = -0.000743389 Jy ! Component: 650 - total flux cleaned = -0.00076794 Jy ! Component: 700 - total flux cleaned = -0.000791895 Jy ! Component: 750 - total flux cleaned = -0.000769246 Jy ! Component: 800 - total flux cleaned = -0.000792272 Jy ! Component: 850 - total flux cleaned = -0.000792908 Jy ! Component: 900 - total flux cleaned = -0.000771434 Jy ! Component: 950 - total flux cleaned = -0.000749892 Jy ! Component: 1000 - total flux cleaned = -0.000729033 Jy ! Component: 1050 - total flux cleaned = -0.000811812 Jy ! Component: 1100 - total flux cleaned = -0.000832018 Jy ! Component: 1150 - total flux cleaned = -0.00087189 Jy ! Component: 1200 - total flux cleaned = -0.000891682 Jy ! Component: 1250 - total flux cleaned = -0.000950009 Jy ! Component: 1300 - total flux cleaned = -0.000950482 Jy ! Component: 1350 - total flux cleaned = -0.00100746 Jy ! Component: 1400 - total flux cleaned = -0.00104467 Jy ! Component: 1450 - total flux cleaned = -0.0010815 Jy ! Component: 1500 - total flux cleaned = -0.00115381 Jy ! Component: 1550 - total flux cleaned = -0.0011178 Jy ! Component: 1600 - total flux cleaned = -0.00111793 Jy ! Component: 1650 - total flux cleaned = -0.00111783 Jy ! Component: 1700 - total flux cleaned = -0.00113503 Jy ! Component: 1750 - total flux cleaned = -0.00116911 Jy ! Component: 1800 - total flux cleaned = -0.00116889 Jy ! Component: 1850 - total flux cleaned = -0.00111861 Jy ! Component: 1900 - total flux cleaned = -0.0011189 Jy ! Component: 1950 - total flux cleaned = -0.00116793 Jy ! Component: 2000 - total flux cleaned = -0.0011516 Jy ! Component: 2050 - total flux cleaned = -0.00115163 Jy ! Component: 2100 - total flux cleaned = -0.00116767 Jy ! Component: 2150 - total flux cleaned = -0.00121458 Jy ! Component: 2200 - total flux cleaned = -0.0012145 Jy ! Component: 2250 - total flux cleaned = -0.00116832 Jy ! Component: 2300 - total flux cleaned = -0.00119881 Jy ! Component: 2350 - total flux cleaned = -0.00116863 Jy ! Component: 2400 - total flux cleaned = -0.00119858 Jy ! Component: 2450 - total flux cleaned = -0.00118377 Jy ! Component: 2500 - total flux cleaned = -0.00119837 Jy ! Component: 2550 - total flux cleaned = -0.00124218 Jy ! Component: 2600 - total flux cleaned = -0.00119902 Jy ! Component: 2650 - total flux cleaned = -0.00125614 Jy ! Component: 2700 - total flux cleaned = -0.00122778 Jy ! Component: 2750 - total flux cleaned = -0.00121375 Jy ! Component: 2800 - total flux cleaned = -0.0011997 Jy ! Component: 2850 - total flux cleaned = -0.00118605 Jy ! Component: 2900 - total flux cleaned = -0.00114497 Jy ! Component: 2950 - total flux cleaned = -0.00114498 Jy ! Component: 3000 - total flux cleaned = -0.00110458 Jy ! Component: 3050 - total flux cleaned = -0.00107795 Jy ! Component: 3100 - total flux cleaned = -0.00106463 Jy ! Component: 3150 - total flux cleaned = -0.001012 Jy ! Component: 3200 - total flux cleaned = -0.00102505 Jy ! Component: 3250 - total flux cleaned = -0.000986181 Jy ! Component: 3300 - total flux cleaned = -0.000934816 Jy ! Component: 3350 - total flux cleaned = -0.000947731 Jy ! Component: 3400 - total flux cleaned = -0.000935041 Jy ! Component: 3450 - total flux cleaned = -0.000922322 Jy ! Component: 3500 - total flux cleaned = -0.000934806 Jy ! Component: 3550 - total flux cleaned = -0.000922413 Jy ! Component: 3600 - total flux cleaned = -0.000959505 Jy ! Component: 3650 - total flux cleaned = -0.000898055 Jy ! Component: 3700 - total flux cleaned = -0.000898115 Jy ! Component: 3750 - total flux cleaned = -0.0008859 Jy ! Component: 3800 - total flux cleaned = -0.000861876 Jy ! Component: 3850 - total flux cleaned = -0.000849903 Jy ! Component: 3900 - total flux cleaned = -0.000849753 Jy ! Component: 3950 - total flux cleaned = -0.000814527 Jy ! Component: 4000 - total flux cleaned = -0.00086145 Jy ! Component: 4050 - total flux cleaned = -0.000849936 Jy ! Total flux subtracted in 4096 components = -0.000838362 Jy ! Clean residual min=-0.000721 max=0.000702 Jy/beam ! Clean residual mean=-0.000002 rms=0.000204 Jy/beam ! Combined flux in latest and established models = 0.077935 Jy keep ! Adding 279 model components to the UV plane model. ! The established model now contains 324 components and 0.0779349 Jy ![Exited script file: muppet] wmap "J1254-2000_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.06 x 6.98 at 1.115 degrees (North through East) ! Clean map min=-0.0016223 max=0.0581 Jy/beam ! Writing clean map to FITS file: J1254-2000_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0581001 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000201647 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.04121 1.04121 2.08241 4.16482 8.32964 16.6593 33.3186 66.6372 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.058 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.06 x 6.98 at 1.115 degrees (North through East) ! Clean map min=-0.0016223 max=0.0581 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1254-2000_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:27:14 2017