! Started logfile: J1254+4536_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:27:19 2017 obs J1254+4536_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J1254+4536_S_2014_01_04_pus_uva.fits ! AN table 1: 75 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.583333 visibilities/baseline/integration-bin. ! Found source: J1254+4536 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 6300 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1254+4536_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 150 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 150 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 150 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 150 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.915409Jy sigma=0.013547 ! Fit after self-cal, rms=0.897255Jy sigma=0.013366 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.572 mas, bmaj=3.761 mas, bpa=61.44 degrees ! Estimated noise=1105.11 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0799534 Jy ! Component: 100 - total flux cleaned = 0.100262 Jy ! Total flux subtracted in 100 components = 0.100262 Jy ! Clean residual min=-0.005858 max=0.008035 Jy/beam ! Clean residual mean=0.000031 rms=0.001671 Jy/beam ! Combined flux in latest and established models = 0.100262 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.100262 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075389Jy sigma=0.000931 ! Fit after self-cal, rms=0.075286Jy sigma=0.000930 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.255 mas, bmaj=4.607 mas, bpa=61.69 degrees ! Estimated noise=635.025 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0101887 Jy ! Component: 100 - total flux cleaned = 0.0149119 Jy ! Component: 150 - total flux cleaned = 0.0174879 Jy ! Component: 200 - total flux cleaned = 0.018936 Jy ! Total flux subtracted in 200 components = 0.018936 Jy ! Clean residual min=-0.003922 max=0.004610 Jy/beam ! Clean residual mean=0.000036 rms=0.001063 Jy/beam ! Combined flux in latest and established models = 0.119197 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 23 components and 0.119197 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074040Jy sigma=0.000910 ! Fit after self-cal, rms=0.073921Jy sigma=0.000910 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.85 KP 1.00* LA 1.01 ! MK 0.94 NL 0.95 OV 0.97 PT 0.98 ! SC 1.09 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.95 KP 1.00* LA 0.95 ! MK 0.96 NL 1.02 OV 1.02 PT 0.94 ! SC 1.14 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.22 KP 1.00* LA 0.79 ! MK 0.97 NL 0.95 OV 0.95 PT 0.96 ! SC 1.08 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 0.94 KP 1.00* LA 0.89 ! MK 0.97 NL 1.08 OV 0.99 PT 0.97 ! SC 1.10 ! ! ! Fit before self-cal, rms=0.073921Jy sigma=0.000910 ! Fit after self-cal, rms=0.074025Jy sigma=0.000895 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.35 mas, bmaj=4.599 mas, bpa=71.92 degrees ! Estimated noise=630.846 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00182165 Jy ! Component: 100 - total flux cleaned = -0.00221291 Jy ! Component: 150 - total flux cleaned = -0.00236508 Jy ! Component: 200 - total flux cleaned = -0.00244842 Jy ! Total flux subtracted in 200 components = -0.00244842 Jy ! Clean residual min=-0.002761 max=0.003300 Jy/beam ! Clean residual mean=0.000009 rms=0.000778 Jy/beam ! Combined flux in latest and established models = 0.116749 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 33 components and 0.116749 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073913Jy sigma=0.000894 ! Fit after self-cal, rms=0.073739Jy sigma=0.000894 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073739Jy sigma=0.000894 ! Fit after self-cal, rms=0.079963Jy sigma=0.000889 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.295 mas, bmaj=4.602 mas, bpa=68.78 degrees ! Estimated noise=628.919 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000244629 Jy ! Component: 100 - total flux cleaned = -0.000456137 Jy ! Component: 150 - total flux cleaned = -0.000498149 Jy ! Component: 200 - total flux cleaned = -0.000497058 Jy ! Total flux subtracted in 200 components = -0.000497058 Jy ! Clean residual min=-0.002115 max=0.002358 Jy/beam ! Clean residual mean=-0.000003 rms=0.000531 Jy/beam ! Combined flux in latest and established models = 0.116252 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 35 components and 0.116252 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079909Jy sigma=0.000888 ! Fit after self-cal, rms=0.080043Jy sigma=0.000888 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-21.5, 26). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00040388 Jy ! Component: 100 - total flux cleaned = 0.000151532 Jy ! Component: 150 - total flux cleaned = -0.000141849 Jy ! Component: 200 - total flux cleaned = -0.000346901 Jy ! Total flux subtracted in 200 components = -0.000346901 Jy ! Clean residual min=-0.001869 max=0.001970 Jy/beam ! Clean residual mean=-0.000002 rms=0.000480 Jy/beam ! Combined flux in latest and established models = 0.115905 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 50 components and 0.115905 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079927Jy sigma=0.000887 ! Fit after self-cal, rms=0.080040Jy sigma=0.000887 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080040Jy sigma=0.000887 ! Fit after self-cal, rms=0.080571Jy sigma=0.000887 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.271 mas, bmaj=4.611 mas, bpa=65.28 degrees ! Estimated noise=627.7 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.08126e-05 Jy ! Component: 100 - total flux cleaned = -0.000388171 Jy ! Component: 150 - total flux cleaned = -0.000559287 Jy ! Component: 200 - total flux cleaned = -0.000634136 Jy ! Total flux subtracted in 200 components = -0.000634136 Jy ! Clean residual min=-0.001766 max=0.001864 Jy/beam ! Clean residual mean=-0.000003 rms=0.000451 Jy/beam ! Combined flux in latest and established models = 0.115271 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 56 components and 0.115271 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080536Jy sigma=0.000886 ! Fit after self-cal, rms=0.080625Jy sigma=0.000886 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00018289 Jy ! Component: 100 - total flux cleaned = -0.000204201 Jy ! Component: 150 - total flux cleaned = -0.000204054 Jy ! Component: 200 - total flux cleaned = -0.000204572 Jy ! Total flux subtracted in 200 components = -0.000204572 Jy ! Clean residual min=-0.001778 max=0.001871 Jy/beam ! Clean residual mean=-0.000003 rms=0.000449 Jy/beam ! Combined flux in latest and established models = 0.115066 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 61 components and 0.115066 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080607Jy sigma=0.000886 ! Fit after self-cal, rms=0.080647Jy sigma=0.000886 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080647Jy sigma=0.000886 ! Fit after self-cal, rms=0.080870Jy sigma=0.000886 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.949 mas, bmaj=8.656 mas, bpa=45.19 degrees ! Estimated noise=725.369 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.14254e-07 Jy ! Component: 100 - total flux cleaned = -8.50894e-05 Jy ! Component: 150 - total flux cleaned = -0.000148838 Jy ! Component: 200 - total flux cleaned = -0.000218653 Jy ! Total flux subtracted in 200 components = -0.000218653 Jy ! Clean residual min=-0.001466 max=0.001695 Jy/beam ! Clean residual mean=-0.000007 rms=0.000455 Jy/beam ! Combined flux in latest and established models = 0.114848 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 74 components and 0.114848 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080862Jy sigma=0.000886 ! Fit after self-cal, rms=0.080900Jy sigma=0.000886 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.67321e-05 Jy ! Component: 100 - total flux cleaned = -0.000112714 Jy ! Component: 150 - total flux cleaned = -0.000122623 Jy ! Component: 200 - total flux cleaned = -0.000123024 Jy ! Total flux subtracted in 200 components = -0.000123024 Jy ! Clean residual min=-0.001476 max=0.001689 Jy/beam ! Clean residual mean=-0.000007 rms=0.000455 Jy/beam ! Combined flux in latest and established models = 0.114725 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 79 components and 0.114725 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080895Jy sigma=0.000886 ! Fit after self-cal, rms=0.080916Jy sigma=0.000886 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.265 mas, bmaj=4.616 mas, bpa=64.13 degrees ! Estimated noise=627.457 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.265 x 4.616 at 64.13 degrees (North through East) ! Clean map min=-0.0021439 max=0.10389 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.555 mas, bmaj=3.756 mas, bpa=63.03 degrees ! Estimated noise=1106.64 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0799062 Jy ! Component: 100 - total flux cleaned = 0.100896 Jy ! Component: 150 - total flux cleaned = 0.108744 Jy ! Component: 200 - total flux cleaned = 0.112829 Jy ! Total flux subtracted in 200 components = 0.112829 Jy ! Clean residual min=-0.003738 max=0.003647 Jy/beam ! Clean residual mean=0.000002 rms=0.000950 Jy/beam ! Combined flux in latest and established models = 0.112829 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.112829 Jy ! Inverting map and beam ! Estimated beam: bmin=4.265 mas, bmaj=4.616 mas, bpa=64.13 degrees ! Estimated noise=627.457 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00194962 Jy ! Component: 100 - total flux cleaned = 0.00180026 Jy ! Component: 150 - total flux cleaned = 0.00162626 Jy ! Component: 200 - total flux cleaned = 0.00142917 Jy ! Total flux subtracted in 200 components = 0.00142917 Jy ! Clean residual min=-0.002010 max=0.001849 Jy/beam ! Clean residual mean=-0.000000 rms=0.000482 Jy/beam ! Combined flux in latest and established models = 0.114258 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 40 components and 0.114258 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.949 mas, bmaj=8.656 mas, bpa=45.19 degrees ! Estimated noise=725.369 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.19532e-05 Jy ! Component: 100 - total flux cleaned = -0.000122357 Jy ! Component: 150 - total flux cleaned = -0.000189081 Jy ! Component: 200 - total flux cleaned = -0.000265761 Jy ! Total flux subtracted in 200 components = -0.000265761 Jy ! Clean residual min=-0.001515 max=0.001715 Jy/beam ! Clean residual mean=-0.000002 rms=0.000477 Jy/beam ! Combined flux in latest and established models = 0.113992 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.22206e-05 Jy ! Component: 100 - total flux cleaned = -0.00011588 Jy ! Component: 150 - total flux cleaned = -0.000100762 Jy ! Component: 200 - total flux cleaned = -0.000100753 Jy ! Total flux subtracted in 200 components = -0.000100753 Jy ! Clean residual min=-0.001483 max=0.001730 Jy/beam ! Clean residual mean=-0.000003 rms=0.000471 Jy/beam ! Combined flux in latest and established models = 0.113891 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 67 components and 0.113891 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.265 mas, bmaj=4.616 mas, bpa=64.13 degrees ! Estimated noise=627.457 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000209587 Jy ! Component: 100 - total flux cleaned = -0.000272198 Jy ! Component: 150 - total flux cleaned = -0.000377829 Jy ! Component: 200 - total flux cleaned = -0.000378471 Jy ! Total flux subtracted in 200 components = -0.000378471 Jy ! Clean residual min=-0.001887 max=0.001782 Jy/beam ! Clean residual mean=-0.000001 rms=0.000453 Jy/beam ! Combined flux in latest and established models = 0.113513 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 79 components and 0.113513 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080939Jy sigma=0.000886 ! Fit after self-cal, rms=0.080925Jy sigma=0.000886 wmodel J1254+4536_S_2014_01_04_pus_map.mod ! Writing 79 model components to file: J1254+4536_S_2014_01_04_pus_map.mod wobs J1254+4536_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J1254+4536_S_2014_01_04_pus_uvs.fits wwins J1254+4536_S_2014_01_04_pus_map.win ! wwins: Wrote 2 windows to J1254+4536_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -6.53203e-07 Jy ! Component: 100 - total flux cleaned = 9.1313e-05 Jy ! Component: 150 - total flux cleaned = 0.000266852 Jy ! Component: 200 - total flux cleaned = 0.000463718 Jy ! Component: 250 - total flux cleaned = 0.000680234 Jy ! Component: 300 - total flux cleaned = 0.000862654 Jy ! Component: 350 - total flux cleaned = 0.00108934 Jy ! Component: 400 - total flux cleaned = 0.00128486 Jy ! Component: 450 - total flux cleaned = 0.00149943 Jy ! Component: 500 - total flux cleaned = 0.00163915 Jy ! Component: 550 - total flux cleaned = 0.00179867 Jy ! Component: 600 - total flux cleaned = 0.00193199 Jy ! Component: 650 - total flux cleaned = 0.00204106 Jy ! Component: 700 - total flux cleaned = 0.00219098 Jy ! Component: 750 - total flux cleaned = 0.00237922 Jy ! Component: 800 - total flux cleaned = 0.00252279 Jy ! Component: 850 - total flux cleaned = 0.0026439 Jy ! Component: 900 - total flux cleaned = 0.00274262 Jy ! Component: 950 - total flux cleaned = 0.00287849 Jy ! Component: 1000 - total flux cleaned = 0.00295486 Jy ! Component: 1050 - total flux cleaned = 0.00304909 Jy ! Component: 1100 - total flux cleaned = 0.00317816 Jy ! Component: 1150 - total flux cleaned = 0.00325067 Jy ! Component: 1200 - total flux cleaned = 0.00334032 Jy ! Component: 1250 - total flux cleaned = 0.00346396 Jy ! Component: 1300 - total flux cleaned = 0.00356838 Jy ! Component: 1350 - total flux cleaned = 0.00370575 Jy ! Component: 1400 - total flux cleaned = 0.00380705 Jy ! Component: 1450 - total flux cleaned = 0.00387381 Jy ! Component: 1500 - total flux cleaned = 0.00398933 Jy ! Component: 1550 - total flux cleaned = 0.00408703 Jy ! Component: 1600 - total flux cleaned = 0.00413553 Jy ! Component: 1650 - total flux cleaned = 0.00423118 Jy ! Component: 1700 - total flux cleaned = 0.00429416 Jy ! Component: 1750 - total flux cleaned = 0.00437198 Jy ! Component: 1800 - total flux cleaned = 0.00441822 Jy ! Component: 1850 - total flux cleaned = 0.00449456 Jy ! Component: 1900 - total flux cleaned = 0.00453979 Jy ! Component: 1950 - total flux cleaned = 0.00461471 Jy ! Component: 2000 - total flux cleaned = 0.00471827 Jy ! Component: 2050 - total flux cleaned = 0.004733 Jy ! Component: 2100 - total flux cleaned = 0.00483463 Jy ! Component: 2150 - total flux cleaned = 0.00489212 Jy ! Component: 2200 - total flux cleaned = 0.00496312 Jy ! Component: 2250 - total flux cleaned = 0.00496317 Jy ! Component: 2300 - total flux cleaned = 0.00507458 Jy ! Component: 2350 - total flux cleaned = 0.00504685 Jy ! Component: 2400 - total flux cleaned = 0.0051018 Jy ! Component: 2450 - total flux cleaned = 0.00514238 Jy ! Component: 2500 - total flux cleaned = 0.00515575 Jy ! Component: 2550 - total flux cleaned = 0.00518227 Jy ! Component: 2600 - total flux cleaned = 0.00516922 Jy ! Component: 2650 - total flux cleaned = 0.00519551 Jy ! Component: 2700 - total flux cleaned = 0.00523441 Jy ! Component: 2750 - total flux cleaned = 0.00527285 Jy ! Component: 2800 - total flux cleaned = 0.00528538 Jy ! Component: 2850 - total flux cleaned = 0.00529825 Jy ! Component: 2900 - total flux cleaned = 0.00534838 Jy ! Component: 2950 - total flux cleaned = 0.0053111 Jy ! Component: 3000 - total flux cleaned = 0.00527402 Jy ! Component: 3050 - total flux cleaned = 0.0052617 Jy ! Component: 3100 - total flux cleaned = 0.00523736 Jy ! Component: 3150 - total flux cleaned = 0.00522535 Jy ! Component: 3200 - total flux cleaned = 0.00521328 Jy ! Component: 3250 - total flux cleaned = 0.00512993 Jy ! Component: 3300 - total flux cleaned = 0.0051418 Jy ! Component: 3350 - total flux cleaned = 0.0050947 Jy ! Component: 3400 - total flux cleaned = 0.00505977 Jy ! Component: 3450 - total flux cleaned = 0.00503659 Jy ! Component: 3500 - total flux cleaned = 0.00499046 Jy ! Component: 3550 - total flux cleaned = 0.00494458 Jy ! Component: 3600 - total flux cleaned = 0.00494459 Jy ! Component: 3650 - total flux cleaned = 0.00491073 Jy ! Component: 3700 - total flux cleaned = 0.00492205 Jy ! Component: 3750 - total flux cleaned = 0.00493321 Jy ! Component: 3800 - total flux cleaned = 0.00492205 Jy ! Component: 3850 - total flux cleaned = 0.00498856 Jy ! Component: 3900 - total flux cleaned = 0.00496647 Jy ! Component: 3950 - total flux cleaned = 0.00496642 Jy ! Component: 4000 - total flux cleaned = 0.00496649 Jy ! Component: 4050 - total flux cleaned = 0.00500996 Jy ! Total flux subtracted in 4096 components = 0.00504234 Jy ! Clean residual min=-0.000613 max=0.000723 Jy/beam ! Clean residual mean=-0.000001 rms=0.000179 Jy/beam ! Combined flux in latest and established models = 0.118555 Jy keep ! Adding 215 model components to the UV plane model. ! The established model now contains 294 components and 0.118555 Jy ![Exited script file: muppet] wmap "J1254+4536_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.265 x 4.616 at 64.13 degrees (North through East) ! Clean map min=-0.0020038 max=0.1045 Jy/beam ! Writing clean map to FITS file: J1254+4536_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.104497 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000178999 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.513885 0.513885 1.02777 2.05554 4.11108 8.22216 16.4443 32.8886 65.7773 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.104 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.265 x 4.616 at 64.13 degrees (North through East) ! Clean map min=-0.0020038 max=0.1045 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1254+4536_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:27:23 2017