! Started logfile: J1254+1141_S_2015_01_22_pus_uvs.log on Tue Jan 3 22:53:07 2017 obs J1254+1141_S_2015_01_22_pus_uva.fits ! Reading UV FITS file: J1254+1141_S_2015_01_22_pus_uva.fits ! AN table 1: 16 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.466667 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1254+1141 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 281 lines of history. ! ! Reading 1344 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1254+1141_S_2015_01_22_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.627123Jy sigma=0.007231 ! Fit after self-cal, rms=0.609317Jy sigma=0.007020 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.746 mas, bmaj=8.527 mas, bpa=-20.51 degrees ! Estimated noise=2133.69 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.326289 Jy ! Component: 100 - total flux cleaned = 0.467226 Jy ! Total flux subtracted in 100 components = 0.467226 Jy ! Clean residual min=-0.050363 max=0.080532 Jy/beam ! Clean residual mean=-0.000230 rms=0.018149 Jy/beam ! Combined flux in latest and established models = 0.467226 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.467226 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.202364Jy sigma=0.002386 ! Fit after self-cal, rms=0.202040Jy sigma=0.002381 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.204 mas, bmaj=9.117 mas, bpa=-19.85 degrees ! Estimated noise=1774.61 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0888867 Jy ! Component: 100 - total flux cleaned = 0.13456 Jy ! Component: 150 - total flux cleaned = 0.155385 Jy ! Component: 200 - total flux cleaned = 0.160674 Jy ! Total flux subtracted in 200 components = 0.160674 Jy ! Clean residual min=-0.034719 max=0.062507 Jy/beam ! Clean residual mean=0.000257 rms=0.013809 Jy/beam ! Combined flux in latest and established models = 0.6279 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 41 components and 0.6279 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.165437Jy sigma=0.001900 ! Fit after self-cal, rms=0.165368Jy sigma=0.001899 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 0.92 KP 1.00 ! LA 1.49 MK 1.28 NL 1.00* OV 0.92 ! PT 0.95 SC 1.03 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 0.96 KP 0.94 ! LA 1.44 MK 1.28 NL 1.00* OV 0.95 ! PT 0.92 SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 0.96 KP 0.81 ! LA 1.18 MK 1.30 NL 1.00* OV 0.88 ! PT 0.93 SC 1.05 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 0.93 KP 0.75 ! LA 1.28 MK 1.15 NL 1.00* OV 0.92 ! PT 0.98 SC 0.99 ! ! ! Fit before self-cal, rms=0.165368Jy sigma=0.001899 ! Fit after self-cal, rms=0.151082Jy sigma=0.001543 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.417 mas, bmaj=9.04 mas, bpa=-19.44 degrees ! Estimated noise=1832.38 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-20, -11.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0152333 Jy ! Component: 100 - total flux cleaned = 0.0165019 Jy ! Component: 150 - total flux cleaned = 0.019288 Jy ! Component: 200 - total flux cleaned = 0.021669 Jy ! Total flux subtracted in 200 components = 0.021669 Jy ! Clean residual min=-0.013182 max=0.009631 Jy/beam ! Clean residual mean=-0.000082 rms=0.002498 Jy/beam ! Combined flux in latest and established models = 0.649569 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 63 components and 0.649569 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147572Jy sigma=0.001506 ! Fit after self-cal, rms=0.147917Jy sigma=0.001504 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147917Jy sigma=0.001504 ! Fit after self-cal, rms=0.146620Jy sigma=0.001504 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.409 mas, bmaj=9.052 mas, bpa=-19.54 degrees ! Estimated noise=1821.77 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000232805 Jy ! Component: 100 - total flux cleaned = 0.000431559 Jy ! Component: 150 - total flux cleaned = 0.00121776 Jy ! Component: 200 - total flux cleaned = 0.00211379 Jy ! Total flux subtracted in 200 components = 0.00211379 Jy ! Clean residual min=-0.010701 max=0.008033 Jy/beam ! Clean residual mean=-0.000063 rms=0.002123 Jy/beam ! Combined flux in latest and established models = 0.651683 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 72 components and 0.651683 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.145973Jy sigma=0.001499 ! Fit after self-cal, rms=0.145961Jy sigma=0.001499 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000504685 Jy ! Component: 100 - total flux cleaned = 0.001285 Jy ! Component: 150 - total flux cleaned = 0.00213548 Jy ! Component: 200 - total flux cleaned = 0.00277857 Jy ! Total flux subtracted in 200 components = 0.00277857 Jy ! Clean residual min=-0.009068 max=0.007405 Jy/beam ! Clean residual mean=-0.000052 rms=0.001995 Jy/beam ! Combined flux in latest and established models = 0.654462 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 81 components and 0.654462 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.145650Jy sigma=0.001496 ! Fit after self-cal, rms=0.145623Jy sigma=0.001496 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.145623Jy sigma=0.001496 ! Fit after self-cal, rms=0.146256Jy sigma=0.001496 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.417 mas, bmaj=9.04 mas, bpa=-19.53 degrees ! Estimated noise=1822.45 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000942326 Jy ! Component: 100 - total flux cleaned = -0.000573749 Jy ! Component: 150 - total flux cleaned = -0.000119381 Jy ! Component: 200 - total flux cleaned = 0.000291669 Jy ! Total flux subtracted in 200 components = 0.000291669 Jy ! Clean residual min=-0.008490 max=0.006748 Jy/beam ! Clean residual mean=-0.000039 rms=0.001891 Jy/beam ! Combined flux in latest and established models = 0.654753 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 89 components and 0.654753 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146027Jy sigma=0.001495 ! Fit after self-cal, rms=0.146000Jy sigma=0.001495 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000275787 Jy ! Component: 100 - total flux cleaned = 0.000455733 Jy ! Component: 150 - total flux cleaned = 0.000367848 Jy ! Component: 200 - total flux cleaned = 0.000538505 Jy ! Total flux subtracted in 200 components = 0.000538505 Jy ! Clean residual min=-0.007888 max=0.006241 Jy/beam ! Clean residual mean=-0.000035 rms=0.001825 Jy/beam ! Combined flux in latest and established models = 0.655292 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 100 components and 0.655291 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.145889Jy sigma=0.001494 ! Fit after self-cal, rms=0.145836Jy sigma=0.001494 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.145836Jy sigma=0.001494 ! Fit after self-cal, rms=0.146727Jy sigma=0.001494 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.798 mas, bmaj=11.69 mas, bpa=-15.24 degrees ! Estimated noise=2159.51 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00162888 Jy ! Component: 100 - total flux cleaned = 0.00145516 Jy ! Component: 150 - total flux cleaned = 0.00145227 Jy ! Component: 200 - total flux cleaned = 0.00145189 Jy ! Total flux subtracted in 200 components = 0.00145189 Jy ! Clean residual min=-0.007008 max=0.006845 Jy/beam ! Clean residual mean=-0.000012 rms=0.002062 Jy/beam ! Combined flux in latest and established models = 0.656743 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 116 components and 0.656743 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146681Jy sigma=0.001493 ! Fit after self-cal, rms=0.146648Jy sigma=0.001493 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.80459e-05 Jy ! Component: 100 - total flux cleaned = -5.11206e-05 Jy ! Component: 150 - total flux cleaned = 7.03937e-06 Jy ! Component: 200 - total flux cleaned = 6.01817e-05 Jy ! Total flux subtracted in 200 components = 6.01817e-05 Jy ! Clean residual min=-0.007006 max=0.006603 Jy/beam ! Clean residual mean=-0.000012 rms=0.002013 Jy/beam ! Combined flux in latest and established models = 0.656804 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 122 components and 0.656804 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146628Jy sigma=0.001493 ! Fit after self-cal, rms=0.146627Jy sigma=0.001493 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.427 mas, bmaj=9.03 mas, bpa=-19.52 degrees ! Estimated noise=1824.98 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.427 x 9.03 at -19.52 degrees (North through East) ! Clean map min=-0.01692 max=0.43708 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.912 mas, bmaj=8.364 mas, bpa=-20.19 degrees ! Estimated noise=2216.87 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.329719 Jy ! Component: 100 - total flux cleaned = 0.460881 Jy ! Component: 150 - total flux cleaned = 0.524638 Jy ! Component: 200 - total flux cleaned = 0.562426 Jy ! Total flux subtracted in 200 components = 0.562426 Jy ! Clean residual min=-0.024313 max=0.025294 Jy/beam ! Clean residual mean=-0.000187 rms=0.006596 Jy/beam ! Combined flux in latest and established models = 0.562426 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.562426 Jy ! Inverting map and beam ! Estimated beam: bmin=3.427 mas, bmaj=9.03 mas, bpa=-19.52 degrees ! Estimated noise=1824.98 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.032695 Jy ! Component: 100 - total flux cleaned = 0.0542687 Jy ! Component: 150 - total flux cleaned = 0.0669021 Jy ! Component: 200 - total flux cleaned = 0.0721783 Jy ! Total flux subtracted in 200 components = 0.0721783 Jy ! Clean residual min=-0.015980 max=0.011305 Jy/beam ! Clean residual mean=-0.000124 rms=0.003423 Jy/beam ! Combined flux in latest and established models = 0.634604 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 43 components and 0.634604 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.798 mas, bmaj=11.69 mas, bpa=-15.24 degrees ! Estimated noise=2159.51 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0124831 Jy ! Component: 100 - total flux cleaned = 0.0204538 Jy ! Component: 150 - total flux cleaned = 0.0225977 Jy ! Component: 200 - total flux cleaned = 0.0231703 Jy ! Total flux subtracted in 200 components = 0.0231703 Jy ! Clean residual min=-0.010462 max=0.007035 Jy/beam ! Clean residual mean=-0.000018 rms=0.002517 Jy/beam ! Combined flux in latest and established models = 0.657775 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000329561 Jy ! Component: 100 - total flux cleaned = 0.000767317 Jy ! Component: 150 - total flux cleaned = 0.00115296 Jy ! Component: 200 - total flux cleaned = 0.00148876 Jy ! Total flux subtracted in 200 components = 0.00148876 Jy ! Clean residual min=-0.008921 max=0.006833 Jy/beam ! Clean residual mean=-0.000001 rms=0.002285 Jy/beam ! Combined flux in latest and established models = 0.659263 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 78 components and 0.659263 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.427 mas, bmaj=9.03 mas, bpa=-19.52 degrees ! Estimated noise=1824.98 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00169239 Jy ! Component: 100 - total flux cleaned = -0.00190047 Jy ! Component: 150 - total flux cleaned = -0.00189515 Jy ! Component: 200 - total flux cleaned = -0.00191144 Jy ! Total flux subtracted in 200 components = -0.00191144 Jy ! Clean residual min=-0.008934 max=0.006378 Jy/beam ! Clean residual mean=-0.000013 rms=0.001854 Jy/beam ! Combined flux in latest and established models = 0.657352 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 91 components and 0.657352 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146599Jy sigma=0.001494 ! Fit after self-cal, rms=0.146544Jy sigma=0.001493 wmodel J1254+1141_S_2015_01_22_pus_map.mod ! Writing 91 model components to file: J1254+1141_S_2015_01_22_pus_map.mod wobs J1254+1141_S_2015_01_22_pus_uvs.fits ! Writing UV FITS file: J1254+1141_S_2015_01_22_pus_uvs.fits wwins J1254+1141_S_2015_01_22_pus_map.win ! wwins: Wrote 2 windows to J1254+1141_S_2015_01_22_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0036446 Jy ! Component: 100 - total flux cleaned = -0.00595065 Jy ! Component: 150 - total flux cleaned = -0.00654034 Jy ! Component: 200 - total flux cleaned = -0.00681388 Jy ! Component: 250 - total flux cleaned = -0.00681646 Jy ! Component: 300 - total flux cleaned = -0.00681629 Jy ! Component: 350 - total flux cleaned = -0.00667521 Jy ! Component: 400 - total flux cleaned = -0.00647894 Jy ! Component: 450 - total flux cleaned = -0.00635373 Jy ! Component: 500 - total flux cleaned = -0.00623504 Jy ! Component: 550 - total flux cleaned = -0.00617954 Jy ! Component: 600 - total flux cleaned = -0.00602047 Jy ! Component: 650 - total flux cleaned = -0.00586815 Jy ! Component: 700 - total flux cleaned = -0.00567587 Jy ! Component: 750 - total flux cleaned = -0.00558491 Jy ! Component: 800 - total flux cleaned = -0.00545342 Jy ! Component: 850 - total flux cleaned = -0.00553944 Jy ! Component: 900 - total flux cleaned = -0.00566334 Jy ! Component: 950 - total flux cleaned = -0.00586373 Jy ! Component: 1000 - total flux cleaned = -0.00594106 Jy ! Component: 1050 - total flux cleaned = -0.00616787 Jy ! Component: 1100 - total flux cleaned = -0.00642688 Jy ! Component: 1150 - total flux cleaned = -0.00660674 Jy ! Component: 1200 - total flux cleaned = -0.00678261 Jy ! Component: 1250 - total flux cleaned = -0.00685223 Jy ! Component: 1300 - total flux cleaned = -0.00695406 Jy ! Component: 1350 - total flux cleaned = -0.00695415 Jy ! Component: 1400 - total flux cleaned = -0.00708641 Jy ! Component: 1450 - total flux cleaned = -0.00715167 Jy ! Component: 1500 - total flux cleaned = -0.00727978 Jy ! Component: 1550 - total flux cleaned = -0.00727919 Jy ! Component: 1600 - total flux cleaned = -0.00737278 Jy ! Component: 1650 - total flux cleaned = -0.00740337 Jy ! Component: 1700 - total flux cleaned = -0.00743365 Jy ! Component: 1750 - total flux cleaned = -0.00752416 Jy ! Component: 1800 - total flux cleaned = -0.00755414 Jy ! Component: 1850 - total flux cleaned = -0.00761336 Jy ! Component: 1900 - total flux cleaned = -0.00764272 Jy ! Component: 1950 - total flux cleaned = -0.00764269 Jy ! Component: 2000 - total flux cleaned = -0.00758514 Jy ! Component: 2050 - total flux cleaned = -0.00749941 Jy ! Component: 2100 - total flux cleaned = -0.007386 Jy ! Component: 2150 - total flux cleaned = -0.00732981 Jy ! Component: 2200 - total flux cleaned = -0.007246 Jy ! Component: 2250 - total flux cleaned = -0.00710669 Jy ! Component: 2300 - total flux cleaned = -0.00696792 Jy ! Component: 2350 - total flux cleaned = -0.00677491 Jy ! Component: 2400 - total flux cleaned = -0.00663794 Jy ! Component: 2450 - total flux cleaned = -0.00655613 Jy ! Component: 2500 - total flux cleaned = -0.00642021 Jy ! Component: 2550 - total flux cleaned = -0.00636607 Jy ! Component: 2600 - total flux cleaned = -0.00628504 Jy ! Component: 2650 - total flux cleaned = -0.00615044 Jy ! Component: 2700 - total flux cleaned = -0.00604321 Jy ! Component: 2750 - total flux cleaned = -0.00596299 Jy ! Component: 2800 - total flux cleaned = -0.00577647 Jy ! Component: 2850 - total flux cleaned = -0.00569679 Jy ! Component: 2900 - total flux cleaned = -0.00553742 Jy ! Component: 2950 - total flux cleaned = -0.00537853 Jy ! Component: 3000 - total flux cleaned = -0.00524622 Jy ! Component: 3050 - total flux cleaned = -0.00506116 Jy ! Component: 3100 - total flux cleaned = -0.00485013 Jy ! Component: 3150 - total flux cleaned = -0.00466573 Jy ! Component: 3200 - total flux cleaned = -0.00450762 Jy ! Component: 3250 - total flux cleaned = -0.00427085 Jy ! Component: 3300 - total flux cleaned = -0.00406061 Jy ! Component: 3350 - total flux cleaned = -0.00387667 Jy ! Component: 3400 - total flux cleaned = -0.00374529 Jy ! Component: 3450 - total flux cleaned = -0.0035878 Jy ! Component: 3500 - total flux cleaned = -0.00343025 Jy ! Component: 3550 - total flux cleaned = -0.00327282 Jy ! Component: 3600 - total flux cleaned = -0.00308905 Jy ! Component: 3650 - total flux cleaned = -0.00293154 Jy ! Component: 3700 - total flux cleaned = -0.00277403 Jy ! Component: 3750 - total flux cleaned = -0.00269514 Jy ! Component: 3800 - total flux cleaned = -0.00248508 Jy ! Component: 3850 - total flux cleaned = -0.00243262 Jy ! Component: 3900 - total flux cleaned = -0.00230141 Jy ! Component: 3950 - total flux cleaned = -0.00216979 Jy ! Component: 4000 - total flux cleaned = -0.00206442 Jy ! Component: 4050 - total flux cleaned = -0.0019063 Jy ! Total flux subtracted in 4096 components = -0.00177439 Jy ! Clean residual min=-0.001550 max=0.001675 Jy/beam ! Clean residual mean=0.000012 rms=0.000430 Jy/beam ! Combined flux in latest and established models = 0.655578 Jy keep ! Adding 190 model components to the UV plane model. ! The established model now contains 281 components and 0.655577 Jy ![Exited script file: muppet] wmap "J1254+1141_S_2015_01_22_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.427 x 9.03 at -19.52 degrees (North through East) ! Clean map min=-0.0096198 max=0.43497 Jy/beam ! Writing clean map to FITS file: J1254+1141_S_2015_01_22_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.434971 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000466053 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.321437 0.321437 0.642873 1.28575 2.57149 5.14299 10.286 20.572 41.1439 82.2878 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0013 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.434 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.427 x 9.03 at -19.52 degrees (North through East) ! Clean map min=-0.0096198 max=0.43497 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1254+1141_S_2015_01_22_pus_uvs.log closed on Tue Jan 3 22:53:14 2017