! Started logfile: J1253+4107_S_2015_01_23_pus_uvs.log on Mon Jan 2 19:25:32 2017 obs J1253+4107_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J1253+4107_S_2015_01_23_pus_uva.fits ! AN table 1: 121 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.696786 visibilities/baseline/integration-bin. ! Found source: J1253+4107 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 15176 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1253+4107_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 193 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 193 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 193 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 193 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.954114Jy sigma=0.011966 ! Fit after self-cal, rms=0.938701Jy sigma=0.011783 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.135 mas, bmaj=3.991 mas, bpa=-19.25 degrees ! Estimated noise=944.048 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0480615 Jy ! Component: 100 - total flux cleaned = 0.0587176 Jy ! Total flux subtracted in 100 components = 0.0587176 Jy ! Clean residual min=-0.003738 max=0.003807 Jy/beam ! Clean residual mean=-0.000000 rms=0.000864 Jy/beam ! Combined flux in latest and established models = 0.0587176 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.0587176 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066630Jy sigma=0.000771 ! Fit after self-cal, rms=0.066622Jy sigma=0.000771 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.959 mas, bmaj=4.885 mas, bpa=-20.09 degrees ! Estimated noise=465.703 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00419949 Jy ! Component: 100 - total flux cleaned = 0.006293 Jy ! Component: 150 - total flux cleaned = 0.00761146 Jy ! Component: 200 - total flux cleaned = 0.00847375 Jy ! Total flux subtracted in 200 components = 0.00847375 Jy ! Clean residual min=-0.002738 max=0.002702 Jy/beam ! Clean residual mean=0.000002 rms=0.000669 Jy/beam ! Combined flux in latest and established models = 0.0671913 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 33 components and 0.0671913 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066289Jy sigma=0.000769 ! Fit after self-cal, rms=0.066299Jy sigma=0.000769 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00* HN 0.95 KP 1.07 ! LA 0.96 MK 1.00 NL 1.09 OV 1.02 ! PT 1.02 SC 1.03 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00* HN 0.99 KP 0.99 ! LA 0.95 MK 0.98 NL 1.10 OV 1.02 ! PT 0.99 SC 1.10 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.00* HN 1.06 KP 0.92 ! LA 0.77 MK 1.05 NL 1.45 OV 0.95 ! PT 0.98 SC 1.07 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.00* HN 1.02 KP 0.82 ! LA 0.80 MK 0.98 NL 1.09 OV 0.95 ! PT 1.03 SC 0.97 ! ! ! Fit before self-cal, rms=0.066299Jy sigma=0.000769 ! Fit after self-cal, rms=0.064696Jy sigma=0.000761 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.998 mas, bmaj=4.94 mas, bpa=-20.52 degrees ! Estimated noise=467.163 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000103052 Jy ! Component: 100 - total flux cleaned = -0.000119016 Jy ! Component: 150 - total flux cleaned = -0.00013376 Jy ! Component: 200 - total flux cleaned = -0.000148156 Jy ! Total flux subtracted in 200 components = -0.000148156 Jy ! Clean residual min=-0.001738 max=0.001848 Jy/beam ! Clean residual mean=0.000002 rms=0.000425 Jy/beam ! Combined flux in latest and established models = 0.0670432 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 44 components and 0.0670432 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064694Jy sigma=0.000761 ! Fit after self-cal, rms=0.064683Jy sigma=0.000760 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064683Jy sigma=0.000760 ! Fit after self-cal, rms=0.065054Jy sigma=0.000758 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.998 mas, bmaj=4.911 mas, bpa=-20.14 degrees ! Estimated noise=466.599 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000161623 Jy ! Component: 100 - total flux cleaned = 0.000160669 Jy ! Component: 150 - total flux cleaned = 0.000169304 Jy ! Component: 200 - total flux cleaned = 0.000169267 Jy ! Total flux subtracted in 200 components = 0.000169267 Jy ! Clean residual min=-0.001505 max=0.001566 Jy/beam ! Clean residual mean=-0.000004 rms=0.000348 Jy/beam ! Combined flux in latest and established models = 0.0672125 Jy selfcal ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 47 components and 0.0672125 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065050Jy sigma=0.000758 ! Fit after self-cal, rms=0.065082Jy sigma=0.000758 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (11, -8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0013187 Jy ! Component: 100 - total flux cleaned = 0.00193982 Jy ! Component: 150 - total flux cleaned = 0.00204802 Jy ! Component: 200 - total flux cleaned = 0.00207979 Jy ! Total flux subtracted in 200 components = 0.00207979 Jy ! Clean residual min=-0.001535 max=0.001233 Jy/beam ! Clean residual mean=-0.000004 rms=0.000328 Jy/beam ! Combined flux in latest and established models = 0.0692922 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 65 components and 0.0692922 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065053Jy sigma=0.000758 ! Fit after self-cal, rms=0.065051Jy sigma=0.000758 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065051Jy sigma=0.000758 ! Fit after self-cal, rms=0.065058Jy sigma=0.000758 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.995 mas, bmaj=4.893 mas, bpa=-19.91 degrees ! Estimated noise=466.539 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000616021 Jy ! Component: 100 - total flux cleaned = 0.000807113 Jy ! Component: 150 - total flux cleaned = 0.000903283 Jy ! Component: 200 - total flux cleaned = 0.000953552 Jy ! Total flux subtracted in 200 components = 0.000953552 Jy ! Clean residual min=-0.001484 max=0.001179 Jy/beam ! Clean residual mean=-0.000003 rms=0.000318 Jy/beam ! Combined flux in latest and established models = 0.0702458 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 78 components and 0.0702458 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065048Jy sigma=0.000758 ! Fit after self-cal, rms=0.065048Jy sigma=0.000758 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000235308 Jy ! Component: 100 - total flux cleaned = 0.000258858 Jy ! Component: 150 - total flux cleaned = 0.000281415 Jy ! Component: 200 - total flux cleaned = 0.000281034 Jy ! Total flux subtracted in 200 components = 0.000281034 Jy ! Clean residual min=-0.001455 max=0.001173 Jy/beam ! Clean residual mean=-0.000003 rms=0.000316 Jy/beam ! Combined flux in latest and established models = 0.0705268 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 82 components and 0.0705268 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065044Jy sigma=0.000758 ! Fit after self-cal, rms=0.065044Jy sigma=0.000758 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065044Jy sigma=0.000758 ! Fit after self-cal, rms=0.065128Jy sigma=0.000758 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.212 mas, bmaj=8.854 mas, bpa=-18.2 degrees ! Estimated noise=557.555 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000290004 Jy ! Component: 100 - total flux cleaned = 0.000307804 Jy ! Component: 150 - total flux cleaned = 0.000332741 Jy ! Component: 200 - total flux cleaned = 0.00035472 Jy ! Total flux subtracted in 200 components = 0.00035472 Jy ! Clean residual min=-0.001413 max=0.001400 Jy/beam ! Clean residual mean=-0.000005 rms=0.000371 Jy/beam ! Combined flux in latest and established models = 0.0708815 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 100 components and 0.0708815 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065127Jy sigma=0.000758 ! Fit after self-cal, rms=0.065126Jy sigma=0.000758 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.81904e-05 Jy ! Component: 100 - total flux cleaned = 0.000101498 Jy ! Component: 150 - total flux cleaned = 0.000119167 Jy ! Component: 200 - total flux cleaned = 0.000119264 Jy ! Total flux subtracted in 200 components = 0.000119264 Jy ! Clean residual min=-0.001419 max=0.001382 Jy/beam ! Clean residual mean=-0.000005 rms=0.000370 Jy/beam ! Combined flux in latest and established models = 0.0710008 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 107 components and 0.0710008 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065125Jy sigma=0.000758 ! Fit after self-cal, rms=0.065125Jy sigma=0.000758 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.994 mas, bmaj=4.889 mas, bpa=-19.92 degrees ! Estimated noise=467.18 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.994 x 4.889 at -19.92 degrees (North through East) ! Clean map min=-0.0013395 max=0.061887 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.164 mas, bmaj=3.984 mas, bpa=-18.7 degrees ! Estimated noise=951.98 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0483426 Jy ! Component: 100 - total flux cleaned = 0.0591055 Jy ! Component: 150 - total flux cleaned = 0.0628286 Jy ! Component: 200 - total flux cleaned = 0.0641362 Jy ! Total flux subtracted in 200 components = 0.0641362 Jy ! Clean residual min=-0.002482 max=0.002541 Jy/beam ! Clean residual mean=-0.000002 rms=0.000655 Jy/beam ! Combined flux in latest and established models = 0.0641362 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.0641362 Jy ! Inverting map and beam ! Estimated beam: bmin=3.994 mas, bmaj=4.889 mas, bpa=-19.92 degrees ! Estimated noise=467.18 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00188776 Jy ! Component: 100 - total flux cleaned = 0.00306972 Jy ! Component: 150 - total flux cleaned = 0.00396851 Jy ! Component: 200 - total flux cleaned = 0.00465907 Jy ! Total flux subtracted in 200 components = 0.00465907 Jy ! Clean residual min=-0.001492 max=0.001214 Jy/beam ! Clean residual mean=-0.000003 rms=0.000326 Jy/beam ! Combined flux in latest and established models = 0.0687952 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 38 components and 0.0687952 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.212 mas, bmaj=8.854 mas, bpa=-18.2 degrees ! Estimated noise=557.555 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000878376 Jy ! Component: 100 - total flux cleaned = 0.00129806 Jy ! Component: 150 - total flux cleaned = 0.00147035 Jy ! Component: 200 - total flux cleaned = 0.00160401 Jy ! Total flux subtracted in 200 components = 0.00160401 Jy ! Clean residual min=-0.001471 max=0.001323 Jy/beam ! Clean residual mean=-0.000006 rms=0.000373 Jy/beam ! Combined flux in latest and established models = 0.0703992 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000104173 Jy ! Component: 100 - total flux cleaned = 0.000186118 Jy ! Component: 150 - total flux cleaned = 0.000252248 Jy ! Component: 200 - total flux cleaned = 0.000278054 Jy ! Total flux subtracted in 200 components = 0.000278054 Jy ! Clean residual min=-0.001460 max=0.001346 Jy/beam ! Clean residual mean=-0.000005 rms=0.000371 Jy/beam ! Combined flux in latest and established models = 0.0706773 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 65 components and 0.0706773 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.994 mas, bmaj=4.889 mas, bpa=-19.92 degrees ! Estimated noise=467.18 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.62335e-05 Jy ! Component: 100 - total flux cleaned = -9.28703e-05 Jy ! Component: 150 - total flux cleaned = -0.000118204 Jy ! Component: 200 - total flux cleaned = -0.00012945 Jy ! Total flux subtracted in 200 components = -0.00012945 Jy ! Clean residual min=-0.001448 max=0.001148 Jy/beam ! Clean residual mean=-0.000002 rms=0.000315 Jy/beam ! Combined flux in latest and established models = 0.0705479 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 77 components and 0.0705479 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065129Jy sigma=0.000758 ! Fit after self-cal, rms=0.065126Jy sigma=0.000758 wmodel J1253+4107_S_2015_01_23_pus_map.mod ! Writing 77 model components to file: J1253+4107_S_2015_01_23_pus_map.mod wobs J1253+4107_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J1253+4107_S_2015_01_23_pus_uvs.fits wwins J1253+4107_S_2015_01_23_pus_map.win ! wwins: Wrote 2 windows to J1253+4107_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000637509 Jy ! Component: 100 - total flux cleaned = -0.000978548 Jy ! Component: 150 - total flux cleaned = -0.00110485 Jy ! Component: 200 - total flux cleaned = -0.00128608 Jy ! Component: 250 - total flux cleaned = -0.00144172 Jy ! Component: 300 - total flux cleaned = -0.00161047 Jy ! Component: 350 - total flux cleaned = -0.00177307 Jy ! Component: 400 - total flux cleaned = -0.00189617 Jy ! Component: 450 - total flux cleaned = -0.00201623 Jy ! Component: 500 - total flux cleaned = -0.0021002 Jy ! Component: 550 - total flux cleaned = -0.00224769 Jy ! Component: 600 - total flux cleaned = -0.00232812 Jy ! Component: 650 - total flux cleaned = -0.002501 Jy ! Component: 700 - total flux cleaned = -0.00262423 Jy ! Component: 750 - total flux cleaned = -0.00273004 Jy ! Component: 800 - total flux cleaned = -0.00283397 Jy ! Component: 850 - total flux cleaned = -0.00296506 Jy ! Component: 900 - total flux cleaned = -0.00307926 Jy ! Component: 950 - total flux cleaned = -0.00319136 Jy ! Component: 1000 - total flux cleaned = -0.00324653 Jy ! Component: 1050 - total flux cleaned = -0.00338218 Jy ! Component: 1100 - total flux cleaned = -0.00340895 Jy ! Component: 1150 - total flux cleaned = -0.00350123 Jy ! Component: 1200 - total flux cleaned = -0.00357893 Jy ! Component: 1250 - total flux cleaned = -0.00365538 Jy ! Component: 1300 - total flux cleaned = -0.00374335 Jy ! Component: 1350 - total flux cleaned = -0.00385447 Jy ! Component: 1400 - total flux cleaned = -0.00392761 Jy ! Component: 1450 - total flux cleaned = -0.00398759 Jy ! Component: 1500 - total flux cleaned = -0.00407032 Jy ! Component: 1550 - total flux cleaned = -0.00409393 Jy ! Component: 1600 - total flux cleaned = -0.00412878 Jy ! Component: 1650 - total flux cleaned = -0.00420857 Jy ! Component: 1700 - total flux cleaned = -0.00426474 Jy ! Component: 1750 - total flux cleaned = -0.00426478 Jy ! Component: 1800 - total flux cleaned = -0.00429798 Jy ! Component: 1850 - total flux cleaned = -0.00434149 Jy ! Component: 1900 - total flux cleaned = -0.0043201 Jy ! Component: 1950 - total flux cleaned = -0.0043415 Jy ! Component: 2000 - total flux cleaned = -0.00438354 Jy ! Component: 2050 - total flux cleaned = -0.0044252 Jy ! Component: 2100 - total flux cleaned = -0.00444568 Jy ! Component: 2150 - total flux cleaned = -0.00447623 Jy ! Component: 2200 - total flux cleaned = -0.00447606 Jy ! Component: 2250 - total flux cleaned = -0.0045161 Jy ! Component: 2300 - total flux cleaned = -0.00453612 Jy ! Component: 2350 - total flux cleaned = -0.00456577 Jy ! Component: 2400 - total flux cleaned = -0.00456577 Jy ! Component: 2450 - total flux cleaned = -0.00459488 Jy ! Component: 2500 - total flux cleaned = -0.00464292 Jy ! Component: 2550 - total flux cleaned = -0.0046905 Jy ! Component: 2600 - total flux cleaned = -0.00475665 Jy ! Component: 2650 - total flux cleaned = -0.00478484 Jy ! Component: 2700 - total flux cleaned = -0.00486847 Jy ! Component: 2750 - total flux cleaned = -0.00491454 Jy ! Component: 2800 - total flux cleaned = -0.00494191 Jy ! Component: 2850 - total flux cleaned = -0.00496908 Jy ! Component: 2900 - total flux cleaned = -0.00497819 Jy ! Component: 2950 - total flux cleaned = -0.00506768 Jy ! Component: 3000 - total flux cleaned = -0.00507655 Jy ! Component: 3050 - total flux cleaned = -0.00510302 Jy ! Component: 3100 - total flux cleaned = -0.00516437 Jy ! Component: 3150 - total flux cleaned = -0.00517297 Jy ! Component: 3200 - total flux cleaned = -0.00519023 Jy ! Component: 3250 - total flux cleaned = -0.00525031 Jy ! Component: 3300 - total flux cleaned = -0.00525878 Jy ! Component: 3350 - total flux cleaned = -0.00529256 Jy ! Component: 3400 - total flux cleaned = -0.00532619 Jy ! Component: 3450 - total flux cleaned = -0.00535955 Jy ! Component: 3500 - total flux cleaned = -0.0053595 Jy ! Component: 3550 - total flux cleaned = -0.00540901 Jy ! Component: 3600 - total flux cleaned = -0.00545807 Jy ! Component: 3650 - total flux cleaned = -0.00547427 Jy ! Component: 3700 - total flux cleaned = -0.00550651 Jy ! Component: 3750 - total flux cleaned = -0.00552266 Jy ! Component: 3800 - total flux cleaned = -0.00556253 Jy ! Component: 3850 - total flux cleaned = -0.0055863 Jy ! Component: 3900 - total flux cleaned = -0.0055863 Jy ! Component: 3950 - total flux cleaned = -0.0056411 Jy ! Component: 4000 - total flux cleaned = -0.00565674 Jy ! Component: 4050 - total flux cleaned = -0.00569547 Jy ! Total flux subtracted in 4096 components = -0.0057032 Jy ! Clean residual min=-0.000430 max=0.000513 Jy/beam ! Clean residual mean=-0.000000 rms=0.000132 Jy/beam ! Combined flux in latest and established models = 0.0648447 Jy keep ! Adding 279 model components to the UV plane model. ! The established model now contains 356 components and 0.0648447 Jy ![Exited script file: muppet] wmap "J1253+4107_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.994 x 4.889 at -19.92 degrees (North through East) ! Clean map min=-0.0012251 max=0.062111 Jy/beam ! Writing clean map to FITS file: J1253+4107_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0621107 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000129731 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.626613 0.626613 1.25323 2.50645 5.0129 10.0258 20.0516 40.1032 80.2064 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.062 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.994 x 4.889 at -19.92 degrees (North through East) ! Clean map min=-0.0012251 max=0.062111 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1253+4107_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 19:25:38 2017