! Started logfile: J1245-4128_S_2014_12_20_pus_uvs.log on Wed Dec 28 13:34:46 2016
obs J1245-4128_S_2014_12_20_pus_uva.fits
! Reading UV FITS file: J1245-4128_S_2014_12_20_pus_uva.fits
! AN table 1: 122 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.53643 visibilities/baseline/integration-bin.
! Found source: J1245-4128
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23588e+09      3.2e+07          1      3.2e+07
!  02        2  2.26788e+09      3.2e+07          1      3.2e+07
!  03        3  2.29988e+09      3.2e+07          1      3.2e+07
!  04        4  2.36388e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 344 lines of history.
! 
! Reading 11780 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@muppet J1245-4128_S_2014_12_20_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 374 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 374 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 374 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 313 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.981847Jy  sigma=0.007024
! Fit after  self-cal, rms=0.920182Jy  sigma=0.006598
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.37 mas, bmaj=7.446 mas, bpa=-5.13 degrees
! Estimated noise=1922.19 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0554525 Jy
! Component: 100  -  total flux cleaned = 0.0736102 Jy
! Total flux subtracted in 100 components = 0.0736102 Jy
! Clean residual min=-0.011424 max=0.014066 Jy/beam
! Clean residual mean=-0.000153 rms=0.003914 Jy/beam
! Combined flux in latest and established models = 0.0736102 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 21 components and 0.0736102 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.163651Jy  sigma=0.001032
! Fit after  self-cal, rms=0.163009Jy  sigma=0.001026
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.222 mas, bmaj=9.567 mas, bpa=-5.441 degrees
! Estimated noise=979.511 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0271131 Jy
! Component: 100  -  total flux cleaned = 0.0400226 Jy
! Component: 150  -  total flux cleaned = 0.0462328 Jy
! Component: 200  -  total flux cleaned = 0.0486913 Jy
! Total flux subtracted in 200 components = 0.0486913 Jy
! Clean residual min=-0.025008 max=0.026114 Jy/beam
! Clean residual mean=-0.000579 rms=0.007872 Jy/beam
! Combined flux in latest and established models = 0.122302 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 43 components and 0.122301 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.157670Jy  sigma=0.001004
! Fit after  self-cal, rms=0.157469Jy  sigma=0.001002
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        0.49     HN        1.00*    KP        3.15     
!   LA        0.43     MK        1.70     NL        2.17     OV        2.09     
!   PT        1.25     SC        2.07     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        0.59     HN        1.00*    KP        2.69     
!   LA        0.45     MK        1.46     NL        2.30     OV        1.71     
!   PT        1.27     SC        1.88     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        0.88     HN        1.00*    KP        1.73     
!   LA        0.51     MK        1.20     NL        1.70     OV        1.36     
!   PT        1.15     SC        1.20     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        0.60     HN        1.00*    KP        1.96     
!   LA        0.45     MK        1.42     NL        1.99     OV        1.68     
!   PT        1.40     SC        1.40     
! 
! 
! Fit before self-cal, rms=0.157469Jy  sigma=0.001002
! Fit after  self-cal, rms=0.304407Jy  sigma=0.000887
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.741 mas, bmaj=10.64 mas, bpa=-6.496 degrees
! Estimated noise=1198.37 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00786723 Jy
! Component: 100  -  total flux cleaned = 0.0075584 Jy
! Component: 150  -  total flux cleaned = 0.00712392 Jy
! Component: 200  -  total flux cleaned = 0.00685357 Jy
! Total flux subtracted in 200 components = 0.00685357 Jy
! Clean residual min=-0.015801 max=0.019363 Jy/beam
! Clean residual mean=-0.000374 rms=0.004775 Jy/beam
! Combined flux in latest and established models = 0.129155 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 51 components and 0.129155 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.302847Jy  sigma=0.000889
! Fit after  self-cal, rms=0.315496Jy  sigma=0.000849
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.315496Jy  sigma=0.000849
! Fit after  self-cal, rms=0.403177Jy  sigma=0.000844
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.949 mas, bmaj=11.08 mas, bpa=-6.154 degrees
! Estimated noise=1321.65 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00222274 Jy
! Component: 100  -  total flux cleaned = 0.00205318 Jy
! Component: 150  -  total flux cleaned = 0.00190138 Jy
! Component: 200  -  total flux cleaned = 0.00169662 Jy
! Total flux subtracted in 200 components = 0.00169662 Jy
! Clean residual min=-0.012286 max=0.009953 Jy/beam
! Clean residual mean=-0.000338 rms=0.003739 Jy/beam
! Combined flux in latest and established models = 0.130852 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 59 components and 0.130852 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.402994Jy  sigma=0.000845
! Fit after  self-cal, rms=0.404879Jy  sigma=0.000843
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00201967 Jy
! Component: 100  -  total flux cleaned = -0.00212865 Jy
! Component: 150  -  total flux cleaned = -0.00227082 Jy
! Component: 200  -  total flux cleaned = -0.00231454 Jy
! Total flux subtracted in 200 components = -0.00231454 Jy
! Clean residual min=-0.012661 max=0.009509 Jy/beam
! Clean residual mean=-0.000372 rms=0.003768 Jy/beam
! Combined flux in latest and established models = 0.128537 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 60 components and 0.128537 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.404887Jy  sigma=0.000843
! Fit after  self-cal, rms=0.404866Jy  sigma=0.000843
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.404866Jy  sigma=0.000843
! Fit after  self-cal, rms=0.443086Jy  sigma=0.000819
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.101 mas, bmaj=11.43 mas, bpa=-6.06 degrees
! Estimated noise=1358.64 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00112654 Jy
! Component: 100  -  total flux cleaned = 0.00104192 Jy
! Component: 150  -  total flux cleaned = 0.000891036 Jy
! Component: 200  -  total flux cleaned = 0.000757873 Jy
! Total flux subtracted in 200 components = 0.000757873 Jy
! Clean residual min=-0.008817 max=0.009531 Jy/beam
! Clean residual mean=0.000002 rms=0.003083 Jy/beam
! Combined flux in latest and established models = 0.129295 Jy
selfcal
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 62 components and 0.129295 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.442936Jy  sigma=0.000819
! Fit after  self-cal, rms=0.444046Jy  sigma=0.000817
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000648804 Jy
! Component: 100  -  total flux cleaned = -0.000650461 Jy
! Component: 150  -  total flux cleaned = -0.000684142 Jy
! Component: 200  -  total flux cleaned = -0.000688157 Jy
! Total flux subtracted in 200 components = -0.000688157 Jy
! Clean residual min=-0.009144 max=0.010361 Jy/beam
! Clean residual mean=-0.000008 rms=0.003209 Jy/beam
! Combined flux in latest and established models = 0.128607 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 73 components and 0.128607 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.444031Jy  sigma=0.000817
! Fit after  self-cal, rms=0.444022Jy  sigma=0.000817
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.444022Jy  sigma=0.000817
! Fit after  self-cal, rms=0.465087Jy  sigma=0.000817
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=12.13 mas, bmaj=43.52 mas, bpa=-6.715 degrees
! Estimated noise=1341.42 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000838769 Jy
! Component: 100  -  total flux cleaned = 0.000834474 Jy
! Component: 150  -  total flux cleaned = 0.000833637 Jy
! Component: 200  -  total flux cleaned = 0.000864238 Jy
! Total flux subtracted in 200 components = 0.000864238 Jy
! Clean residual min=-0.010573 max=0.011102 Jy/beam
! Clean residual mean=0.000022 rms=0.004232 Jy/beam
! Combined flux in latest and established models = 0.129471 Jy
selfcal
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 73 components and 0.129471 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.465036Jy  sigma=0.000817
! Fit after  self-cal, rms=0.465402Jy  sigma=0.000817
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.26455e-05 Jy
! Component: 100  -  total flux cleaned = 8.19133e-05 Jy
! Component: 150  -  total flux cleaned = 8.23142e-05 Jy
! Component: 200  -  total flux cleaned = 8.28909e-05 Jy
! Total flux subtracted in 200 components = 8.28909e-05 Jy
! Clean residual min=-0.010637 max=0.011416 Jy/beam
! Clean residual mean=0.000027 rms=0.004275 Jy/beam
! Combined flux in latest and established models = 0.129554 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 74 components and 0.129554 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.465367Jy  sigma=0.000817
! Fit after  self-cal, rms=0.465386Jy  sigma=0.000817
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.233 mas, bmaj=11.77 mas, bpa=-5.746 degrees
! Estimated noise=1386.29 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.233 x 11.77 at -5.746 degrees (North through East)
! Clean map  min=-0.0089164  max=0.10257 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.839 mas, bmaj=8.223 mas, bpa=-6.068 degrees
! Estimated noise=3630.01 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0832655 Jy
! Component: 100  -  total flux cleaned = 0.106871 Jy
! Component: 150  -  total flux cleaned = 0.117877 Jy
! Component: 200  -  total flux cleaned = 0.122228 Jy
! Total flux subtracted in 200 components = 0.122228 Jy
! Clean residual min=-0.013979 max=0.020134 Jy/beam
! Clean residual mean=-0.000005 rms=0.004197 Jy/beam
! Combined flux in latest and established models = 0.122228 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.122228 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.233 mas, bmaj=11.77 mas, bpa=-5.746 degrees
! Estimated noise=1386.29 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00497771 Jy
! Component: 100  -  total flux cleaned = 0.00526776 Jy
! Component: 150  -  total flux cleaned = 0.00542874 Jy
! Component: 200  -  total flux cleaned = 0.00556515 Jy
! Total flux subtracted in 200 components = 0.00556515 Jy
! Clean residual min=-0.009409 max=0.010369 Jy/beam
! Clean residual mean=0.000012 rms=0.003316 Jy/beam
! Combined flux in latest and established models = 0.127794 Jy
! Adding 14 model components to the UV plane model.
! The established model now contains 29 components and 0.127794 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=12.13 mas, bmaj=43.52 mas, bpa=-6.715 degrees
! Estimated noise=1341.42 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00149649 Jy
! Component: 100  -  total flux cleaned = 0.00150141 Jy
! Component: 150  -  total flux cleaned = 0.00150365 Jy
! Component: 200  -  total flux cleaned = 0.00150505 Jy
! Total flux subtracted in 200 components = 0.00150505 Jy
! Clean residual min=-0.010922 max=0.011284 Jy/beam
! Clean residual mean=0.000026 rms=0.004295 Jy/beam
! Combined flux in latest and established models = 0.129299 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.05987e-06 Jy
! Component: 100  -  total flux cleaned = 1.93125e-06 Jy
! Component: 150  -  total flux cleaned = 2.39343e-05 Jy
! Component: 200  -  total flux cleaned = 6.51701e-05 Jy
! Total flux subtracted in 200 components = 6.51701e-05 Jy
! Clean residual min=-0.010955 max=0.011324 Jy/beam
! Clean residual mean=0.000027 rms=0.004294 Jy/beam
! Combined flux in latest and established models = 0.129364 Jy
! Adding 8 model components to the UV plane model.
! The established model now contains 37 components and 0.129364 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.233 mas, bmaj=11.77 mas, bpa=-5.746 degrees
! Estimated noise=1386.29 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000810879 Jy
! Component: 100  -  total flux cleaned = -0.000751138 Jy
! Component: 150  -  total flux cleaned = -0.000802866 Jy
! Component: 200  -  total flux cleaned = -0.000792635 Jy
! Total flux subtracted in 200 components = -0.000792635 Jy
! Clean residual min=-0.009332 max=0.010527 Jy/beam
! Clean residual mean=0.000016 rms=0.003310 Jy/beam
! Combined flux in latest and established models = 0.128571 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 48 components and 0.128571 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.465355Jy  sigma=0.000817
! Fit after  self-cal, rms=0.465222Jy  sigma=0.000817
wmodel J1245-4128_S_2014_12_20_pus_map.mod
! Writing 48 model components to file: J1245-4128_S_2014_12_20_pus_map.mod
wobs J1245-4128_S_2014_12_20_pus_uvs.fits
! Writing UV FITS file: J1245-4128_S_2014_12_20_pus_uvs.fits
wwins J1245-4128_S_2014_12_20_pus_map.win
! wwins: Wrote 1 windows to J1245-4128_S_2014_12_20_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.00267378 Jy
! Component: 100  -  total flux cleaned = 0.00401826 Jy
! Component: 150  -  total flux cleaned = 0.00496501 Jy
! Component: 200  -  total flux cleaned = 0.00570656 Jy
! Component: 250  -  total flux cleaned = 0.00656104 Jy
! Component: 300  -  total flux cleaned = 0.0072499 Jy
! Component: 350  -  total flux cleaned = 0.00698427 Jy
! Component: 400  -  total flux cleaned = 0.00685618 Jy
! Component: 450  -  total flux cleaned = 0.0073608 Jy
! Component: 500  -  total flux cleaned = 0.00723594 Jy
! Component: 550  -  total flux cleaned = 0.00723566 Jy
! Component: 600  -  total flux cleaned = 0.00699747 Jy
! Component: 650  -  total flux cleaned = 0.00699856 Jy
! Component: 700  -  total flux cleaned = 0.00734615 Jy
! Component: 750  -  total flux cleaned = 0.00780334 Jy
! Component: 800  -  total flux cleaned = 0.00814138 Jy
! Component: 850  -  total flux cleaned = 0.00814104 Jy
! Component: 900  -  total flux cleaned = 0.00836056 Jy
! Component: 950  -  total flux cleaned = 0.00836093 Jy
! Component: 1000  -  total flux cleaned = 0.0082528 Jy
! Component: 1050  -  total flux cleaned = 0.0083609 Jy
! Component: 1100  -  total flux cleaned = 0.00836109 Jy
! Component: 1150  -  total flux cleaned = 0.00804243 Jy
! Component: 1200  -  total flux cleaned = 0.00814781 Jy
! Component: 1250  -  total flux cleaned = 0.00783165 Jy
! Component: 1300  -  total flux cleaned = 0.00741258 Jy
! Component: 1350  -  total flux cleaned = 0.0072028 Jy
! Component: 1400  -  total flux cleaned = 0.00678404 Jy
! Component: 1450  -  total flux cleaned = 0.00615658 Jy
! Component: 1500  -  total flux cleaned = 0.00584438 Jy
! Component: 1550  -  total flux cleaned = 0.00532269 Jy
! Component: 1600  -  total flux cleaned = 0.00500949 Jy
! Component: 1650  -  total flux cleaned = 0.00438372 Jy
! Component: 1700  -  total flux cleaned = 0.00407075 Jy
! Component: 1750  -  total flux cleaned = 0.00365291 Jy
! Component: 1800  -  total flux cleaned = 0.00323358 Jy
! Component: 1850  -  total flux cleaned = 0.00291825 Jy
! Component: 1900  -  total flux cleaned = 0.00228659 Jy
! Component: 1950  -  total flux cleaned = 0.00196997 Jy
! Component: 2000  -  total flux cleaned = 0.00154613 Jy
! Component: 2050  -  total flux cleaned = 0.0011203 Jy
! Component: 2100  -  total flux cleaned = 0.000585334 Jy
! Component: 2150  -  total flux cleaned = -5.94289e-05 Jy
! Component: 2200  -  total flux cleaned = -0.000707475 Jy
! Component: 2250  -  total flux cleaned = -0.00114272 Jy
! Component: 2300  -  total flux cleaned = -0.00169072 Jy
! Component: 2350  -  total flux cleaned = -0.00213267 Jy
! Component: 2400  -  total flux cleaned = -0.00257874 Jy
! Component: 2450  -  total flux cleaned = -0.00313964 Jy
! Component: 2500  -  total flux cleaned = -0.00359325 Jy
! Component: 2550  -  total flux cleaned = -0.00416509 Jy
! Component: 2600  -  total flux cleaned = -0.00462656 Jy
! Component: 2650  -  total flux cleaned = -0.00497618 Jy
! Component: 2700  -  total flux cleaned = -0.00568262 Jy
! Component: 2750  -  total flux cleaned = -0.00603987 Jy
! Component: 2800  -  total flux cleaned = -0.00664063 Jy
! Component: 2850  -  total flux cleaned = -0.00712653 Jy
! Component: 2900  -  total flux cleaned = -0.0076174 Jy
! Component: 2950  -  total flux cleaned = -0.00811381 Jy
! Component: 3000  -  total flux cleaned = -0.00861447 Jy
! Component: 3050  -  total flux cleaned = -0.00911932 Jy
! Component: 3100  -  total flux cleaned = -0.00962874 Jy
! Component: 3150  -  total flux cleaned = -0.0100156 Jy
! Component: 3200  -  total flux cleaned = -0.0104074 Jy
! Component: 3250  -  total flux cleaned = -0.0109369 Jy
! Component: 3300  -  total flux cleaned = -0.0112045 Jy
! Component: 3350  -  total flux cleaned = -0.0118831 Jy
! Component: 3400  -  total flux cleaned = -0.0122943 Jy
! Component: 3450  -  total flux cleaned = -0.0129872 Jy
! Component: 3500  -  total flux cleaned = -0.013691 Jy
! Component: 3550  -  total flux cleaned = -0.0144058 Jy
! Component: 3600  -  total flux cleaned = -0.0152773 Jy
! Component: 3650  -  total flux cleaned = -0.0158669 Jy
! Component: 3700  -  total flux cleaned = -0.0169137 Jy
! Component: 3750  -  total flux cleaned = -0.0176721 Jy
! Component: 3800  -  total flux cleaned = -0.0185966 Jy
! Component: 3850  -  total flux cleaned = -0.0195362 Jy
! Component: 3900  -  total flux cleaned = -0.0201729 Jy
! Component: 3950  -  total flux cleaned = -0.0208156 Jy
! Component: 4000  -  total flux cleaned = -0.0213072 Jy
! Component: 4050  -  total flux cleaned = -0.0214738 Jy
! Total flux subtracted in 4096 components = -0.0218148 Jy
! Clean residual min=-0.009422 max=0.009746 Jy/beam
! Clean residual mean=-0.000515 rms=0.003290 Jy/beam
! Combined flux in latest and established models = 0.106756 Jy
keep
! Adding 248 model components to the UV plane model.
! The established model now contains 296 components and 0.106756 Jy
![Exited script file: muppet]
wmap "J1245-4128_S_2014_12_20_pus\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.233 x 11.77 at -5.746 degrees (North through East)
! Clean map  min=-0.016841  max=0.10561 Jy/beam
! Writing clean map to FITS file: J1245-4128_S_2014_12_20_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.105612 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00274872 
device "J1245-4128_S_2014_12_20_pus\_map.eps/VPS"
! Attempting to open device: 'J1245-4128_S_2014_12_20_pus_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -7.80797 7.80797 15.6159 31.2319 62.4638
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0082 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.105 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.233 x 11.77 at -5.746 degrees (North through East)
! Clean map  min=-0.016841  max=0.10561 Jy/beam
quit
! Quitting program
! Log file J1245-4128_S_2014_12_20_pus_uvs.log closed on Wed Dec 28 13:34:52 2016