! Started logfile: J1244+4048_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:26:49 2017 obs J1244+4048_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J1244+4048_S_2014_01_04_pus_uva.fits ! AN table 1: 125 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.499333 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1244+4048 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 8988 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1244+4048_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 313 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 313 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 313 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 313 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.958173Jy sigma=0.015192 ! Fit after self-cal, rms=0.874919Jy sigma=0.013982 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.266 mas, bmaj=4.117 mas, bpa=43.76 degrees ! Estimated noise=855.725 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.110008 Jy ! Component: 100 - total flux cleaned = 0.155566 Jy ! Total flux subtracted in 100 components = 0.155566 Jy ! Clean residual min=-0.042855 max=0.067732 Jy/beam ! Clean residual mean=0.000347 rms=0.012845 Jy/beam ! Combined flux in latest and established models = 0.155566 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.155566 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.215222Jy sigma=0.003136 ! Fit after self-cal, rms=0.213306Jy sigma=0.003118 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.204 mas, bmaj=4.955 mas, bpa=44.76 degrees ! Estimated noise=491.845 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0414254 Jy ! Component: 100 - total flux cleaned = 0.0621431 Jy ! Component: 150 - total flux cleaned = 0.0664607 Jy ! Component: 200 - total flux cleaned = 0.067901 Jy ! Total flux subtracted in 200 components = 0.067901 Jy ! Clean residual min=-0.058631 max=0.073020 Jy/beam ! Clean residual mean=0.000914 rms=0.018246 Jy/beam ! Combined flux in latest and established models = 0.223467 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 21 components and 0.223467 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.203959Jy sigma=0.003002 ! Fit after self-cal, rms=0.202357Jy sigma=0.002969 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.97 KP 1.00* LA 0.56 ! MK 0.88 NL 2.32 OV 1.64 PT 0.54 ! SC 1.43 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.17 KP 1.00* LA 0.55 ! MK 0.87 NL 2.55 OV 1.75 PT 0.52 ! SC 1.55 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.32 KP 1.00* LA 0.45 ! MK 0.91 NL 2.58 OV 1.76 PT 0.52 ! SC 1.49 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.18 KP 1.00* LA 0.51 ! MK 0.89 NL 3.19 OV 1.98 PT 0.55 ! SC 1.49 ! ! ! Fit before self-cal, rms=0.202357Jy sigma=0.002969 ! Fit after self-cal, rms=0.281662Jy sigma=0.002250 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.646 mas, bmaj=4.808 mas, bpa=-59.33 degrees ! Estimated noise=499.292 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0157085 Jy ! Component: 100 - total flux cleaned = -0.0162189 Jy ! Component: 150 - total flux cleaned = -0.0170593 Jy ! Component: 200 - total flux cleaned = -0.0170755 Jy ! Total flux subtracted in 200 components = -0.0170755 Jy ! Clean residual min=-0.045808 max=0.037565 Jy/beam ! Clean residual mean=0.000131 rms=0.011105 Jy/beam ! Combined flux in latest and established models = 0.206392 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 32 components and 0.206392 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.276639Jy sigma=0.002180 ! Fit after self-cal, rms=0.284424Jy sigma=0.002076 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.284424Jy sigma=0.002076 ! Fit after self-cal, rms=0.349201Jy sigma=0.001909 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.595 mas, bmaj=5.16 mas, bpa=-44.26 degrees ! Estimated noise=537.632 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0139198 Jy ! Component: 100 - total flux cleaned = -0.0151519 Jy ! Component: 150 - total flux cleaned = -0.0162158 Jy ! Component: 200 - total flux cleaned = -0.0168675 Jy ! Total flux subtracted in 200 components = -0.0168675 Jy ! Clean residual min=-0.037449 max=0.041168 Jy/beam ! Clean residual mean=0.000155 rms=0.010936 Jy/beam ! Combined flux in latest and established models = 0.189524 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 36 components and 0.189524 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.345278Jy sigma=0.001916 ! Fit after self-cal, rms=0.344960Jy sigma=0.001905 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0025594 Jy ! Component: 100 - total flux cleaned = -0.00327132 Jy ! Component: 150 - total flux cleaned = -0.0035812 Jy ! Component: 200 - total flux cleaned = -0.00392728 Jy ! Total flux subtracted in 200 components = -0.00392728 Jy ! Clean residual min=-0.040032 max=0.041143 Jy/beam ! Clean residual mean=0.000184 rms=0.011309 Jy/beam ! Combined flux in latest and established models = 0.185597 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 36 components and 0.185597 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.342151Jy sigma=0.001909 ! Fit after self-cal, rms=0.342165Jy sigma=0.001909 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.342165Jy sigma=0.001909 ! Fit after self-cal, rms=0.300036Jy sigma=0.001890 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.949 mas, bmaj=5.254 mas, bpa=-36.43 degrees ! Estimated noise=528.112 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0113201 Jy ! Component: 100 - total flux cleaned = -0.0121138 Jy ! Component: 150 - total flux cleaned = -0.0128684 Jy ! Component: 200 - total flux cleaned = -0.0132367 Jy ! Total flux subtracted in 200 components = -0.0132367 Jy ! Clean residual min=-0.038922 max=0.039636 Jy/beam ! Clean residual mean=0.000151 rms=0.011046 Jy/beam ! Combined flux in latest and established models = 0.17236 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 39 components and 0.17236 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.296289Jy sigma=0.001894 ! Fit after self-cal, rms=0.295715Jy sigma=0.001893 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0019829 Jy ! Component: 100 - total flux cleaned = -0.00231628 Jy ! Component: 150 - total flux cleaned = -0.00262131 Jy ! Component: 200 - total flux cleaned = -0.00290648 Jy ! Total flux subtracted in 200 components = -0.00290648 Jy ! Clean residual min=-0.039828 max=0.039063 Jy/beam ! Clean residual mean=0.000174 rms=0.011188 Jy/beam ! Combined flux in latest and established models = 0.169454 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 39 components and 0.169454 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.293136Jy sigma=0.001895 ! Fit after self-cal, rms=0.293057Jy sigma=0.001894 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.293057Jy sigma=0.001894 ! Fit after self-cal, rms=0.250817Jy sigma=0.001878 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.82 mas, bmaj=11.71 mas, bpa=34.42 degrees ! Estimated noise=479.726 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00695163 Jy ! Component: 100 - total flux cleaned = -0.00813069 Jy ! Component: 150 - total flux cleaned = -0.00906667 Jy ! Component: 200 - total flux cleaned = -0.00932986 Jy ! Total flux subtracted in 200 components = -0.00932986 Jy ! Clean residual min=-0.045737 max=0.043182 Jy/beam ! Clean residual mean=0.000206 rms=0.012933 Jy/beam ! Combined flux in latest and established models = 0.160124 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 45 components and 0.160124 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.250974Jy sigma=0.001898 ! Fit after self-cal, rms=0.248299Jy sigma=0.001883 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00168368 Jy ! Component: 100 - total flux cleaned = -0.00168502 Jy ! Component: 150 - total flux cleaned = -0.00147389 Jy ! Component: 200 - total flux cleaned = -0.00125352 Jy ! Total flux subtracted in 200 components = -0.00125352 Jy ! Clean residual min=-0.046212 max=0.043243 Jy/beam ! Clean residual mean=0.000224 rms=0.012859 Jy/beam ! Combined flux in latest and established models = 0.15887 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 47 components and 0.15887 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.248914Jy sigma=0.001901 ! Fit after self-cal, rms=0.247150Jy sigma=0.001893 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=5.301 mas, bmaj=5.409 mas, bpa=1.437 degrees ! Estimated noise=504.72 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.301 x 5.409 at 1.437 degrees (North through East) ! Clean map min=-0.057678 max=0.10514 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.073 mas, bmaj=4.174 mas, bpa=19.58 degrees ! Estimated noise=1045.57 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.134873 Jy ! Component: 100 - total flux cleaned = 0.158411 Jy ! Component: 150 - total flux cleaned = 0.158559 Jy ! Component: 200 - total flux cleaned = 0.156146 Jy ! Total flux subtracted in 200 components = 0.156146 Jy ! Clean residual min=-0.051577 max=0.047830 Jy/beam ! Clean residual mean=0.000073 rms=0.010645 Jy/beam ! Combined flux in latest and established models = 0.156146 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.156146 Jy ! Inverting map and beam ! Estimated beam: bmin=5.301 mas, bmaj=5.409 mas, bpa=1.437 degrees ! Estimated noise=504.72 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.28961e-05 Jy ! Component: 100 - total flux cleaned = -0.000100236 Jy ! Component: 150 - total flux cleaned = -0.000581919 Jy ! Component: 200 - total flux cleaned = -0.00101184 Jy ! Total flux subtracted in 200 components = -0.00101184 Jy ! Clean residual min=-0.037405 max=0.039206 Jy/beam ! Clean residual mean=0.000165 rms=0.010829 Jy/beam ! Combined flux in latest and established models = 0.155134 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 18 components and 0.155134 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.82 mas, bmaj=11.71 mas, bpa=34.42 degrees ! Estimated noise=479.726 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0063945 Jy ! Component: 100 - total flux cleaned = 0.00596883 Jy ! Component: 150 - total flux cleaned = 0.00525627 Jy ! Component: 200 - total flux cleaned = 0.00493971 Jy ! Total flux subtracted in 200 components = 0.00493971 Jy ! Clean residual min=-0.046082 max=0.039624 Jy/beam ! Clean residual mean=0.000206 rms=0.012934 Jy/beam ! Combined flux in latest and established models = 0.160074 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.5063e-06 Jy ! Component: 100 - total flux cleaned = 1.22304e-05 Jy ! Component: 150 - total flux cleaned = 0.000282671 Jy ! Component: 200 - total flux cleaned = 0.000281088 Jy ! Total flux subtracted in 200 components = 0.000281088 Jy ! Clean residual min=-0.046114 max=0.040329 Jy/beam ! Clean residual mean=0.000204 rms=0.012858 Jy/beam ! Combined flux in latest and established models = 0.160355 Jy ! Adding 7 model components to the UV plane model. ! The established model now contains 24 components and 0.160355 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=5.301 mas, bmaj=5.409 mas, bpa=1.437 degrees ! Estimated noise=504.72 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00663951 Jy ! Component: 100 - total flux cleaned = -0.00575924 Jy ! Component: 150 - total flux cleaned = -0.00573617 Jy ! Component: 200 - total flux cleaned = -0.0053987 Jy ! Total flux subtracted in 200 components = -0.0053987 Jy ! Clean residual min=-0.038430 max=0.039895 Jy/beam ! Clean residual mean=0.000168 rms=0.010579 Jy/beam ! Combined flux in latest and established models = 0.154956 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 32 components and 0.154956 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.245194Jy sigma=0.001891 ! Fit after self-cal, rms=0.244723Jy sigma=0.001887 wmodel J1244+4048_S_2014_01_04_pus_map.mod ! Writing 32 model components to file: J1244+4048_S_2014_01_04_pus_map.mod wobs J1244+4048_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J1244+4048_S_2014_01_04_pus_uvs.fits wwins J1244+4048_S_2014_01_04_pus_map.win ! wwins: Wrote 1 windows to J1244+4048_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000433193 Jy ! Component: 100 - total flux cleaned = 0.00215313 Jy ! Component: 150 - total flux cleaned = 0.0039676 Jy ! Component: 200 - total flux cleaned = 0.00625791 Jy ! Component: 250 - total flux cleaned = 0.00897429 Jy ! Component: 300 - total flux cleaned = 0.0125947 Jy ! Component: 350 - total flux cleaned = 0.016524 Jy ! Component: 400 - total flux cleaned = 0.0203043 Jy ! Component: 450 - total flux cleaned = 0.0248394 Jy ! Component: 500 - total flux cleaned = 0.0292084 Jy ! Component: 550 - total flux cleaned = 0.03425 Jy ! Component: 600 - total flux cleaned = 0.0387221 Jy ! Component: 650 - total flux cleaned = 0.0414758 Jy ! Component: 700 - total flux cleaned = 0.0445373 Jy ! Component: 750 - total flux cleaned = 0.04714 Jy ! Component: 800 - total flux cleaned = 0.0496707 Jy ! Component: 850 - total flux cleaned = 0.0517753 Jy ! Component: 900 - total flux cleaned = 0.053823 Jy ! Component: 950 - total flux cleaned = 0.05646 Jy ! Component: 1000 - total flux cleaned = 0.0590227 Jy ! Component: 1050 - total flux cleaned = 0.0605877 Jy ! Component: 1100 - total flux cleaned = 0.062727 Jy ! Component: 1150 - total flux cleaned = 0.0639216 Jy ! Component: 1200 - total flux cleaned = 0.0650839 Jy ! Component: 1250 - total flux cleaned = 0.0665021 Jy ! Component: 1300 - total flux cleaned = 0.0673369 Jy ! Component: 1350 - total flux cleaned = 0.0681473 Jy ! Component: 1400 - total flux cleaned = 0.0692137 Jy ! Component: 1450 - total flux cleaned = 0.0705103 Jy ! Component: 1500 - total flux cleaned = 0.0715268 Jy ! Component: 1550 - total flux cleaned = 0.0725194 Jy ! Component: 1600 - total flux cleaned = 0.0732489 Jy ! Component: 1650 - total flux cleaned = 0.0744428 Jy ! Component: 1700 - total flux cleaned = 0.0753749 Jy ! Component: 1750 - total flux cleaned = 0.0767466 Jy ! Component: 1800 - total flux cleaned = 0.0780892 Jy ! Component: 1850 - total flux cleaned = 0.0787457 Jy ! Component: 1900 - total flux cleaned = 0.0789643 Jy ! Component: 1950 - total flux cleaned = 0.0798081 Jy ! Component: 2000 - total flux cleaned = 0.0798057 Jy ! Component: 2050 - total flux cleaned = 0.0806224 Jy ! Component: 2100 - total flux cleaned = 0.0806211 Jy ! Component: 2150 - total flux cleaned = 0.0816069 Jy ! Component: 2200 - total flux cleaned = 0.0821798 Jy ! Component: 2250 - total flux cleaned = 0.0825564 Jy ! Component: 2300 - total flux cleaned = 0.082934 Jy ! Component: 2350 - total flux cleaned = 0.0838484 Jy ! Component: 2400 - total flux cleaned = 0.0842065 Jy ! Component: 2450 - total flux cleaned = 0.0843813 Jy ! Component: 2500 - total flux cleaned = 0.0850774 Jy ! Component: 2550 - total flux cleaned = 0.0852483 Jy ! Component: 2600 - total flux cleaned = 0.0859215 Jy ! Component: 2650 - total flux cleaned = 0.0859208 Jy ! Component: 2700 - total flux cleaned = 0.0865695 Jy ! Component: 2750 - total flux cleaned = 0.087213 Jy ! Component: 2800 - total flux cleaned = 0.0875317 Jy ! Component: 2850 - total flux cleaned = 0.0876907 Jy ! Component: 2900 - total flux cleaned = 0.0878444 Jy ! Component: 2950 - total flux cleaned = 0.0882978 Jy ! Component: 3000 - total flux cleaned = 0.0884428 Jy ! Component: 3050 - total flux cleaned = 0.0885888 Jy ! Component: 3100 - total flux cleaned = 0.0890226 Jy ! Component: 3150 - total flux cleaned = 0.0890259 Jy ! Component: 3200 - total flux cleaned = 0.0891686 Jy ! Component: 3250 - total flux cleaned = 0.0894432 Jy ! Component: 3300 - total flux cleaned = 0.0893051 Jy ! Component: 3350 - total flux cleaned = 0.0897057 Jy ! Component: 3400 - total flux cleaned = 0.0902346 Jy ! Component: 3450 - total flux cleaned = 0.0907519 Jy ! Component: 3500 - total flux cleaned = 0.0912607 Jy ! Component: 3550 - total flux cleaned = 0.0911341 Jy ! Component: 3600 - total flux cleaned = 0.0921295 Jy ! Component: 3650 - total flux cleaned = 0.0920038 Jy ! Component: 3700 - total flux cleaned = 0.0926092 Jy ! Component: 3750 - total flux cleaned = 0.0933224 Jy ! Component: 3800 - total flux cleaned = 0.0937904 Jy ! Component: 3850 - total flux cleaned = 0.0942528 Jy ! Component: 3900 - total flux cleaned = 0.0953987 Jy ! Component: 3950 - total flux cleaned = 0.0957347 Jy ! Component: 4000 - total flux cleaned = 0.0961826 Jy ! Component: 4050 - total flux cleaned = 0.0969556 Jy ! Total flux subtracted in 4096 components = 0.0976095 Jy ! Clean residual min=-0.005416 max=0.005986 Jy/beam ! Clean residual mean=0.000157 rms=0.002046 Jy/beam ! Combined flux in latest and established models = 0.252566 Jy keep ! Adding 234 model components to the UV plane model. ! The established model now contains 266 components and 0.252566 Jy ![Exited script file: muppet] wmap "J1244+4048_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.301 x 5.409 at 1.437 degrees (North through East) ! Clean map min=-0.043398 max=0.10866 Jy/beam ! Writing clean map to FITS file: J1244+4048_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.108663 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.0020039 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -5.53241 5.53241 11.0648 22.1296 44.2593 88.5185 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.108 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.301 x 5.409 at 1.437 degrees (North through East) ! Clean map min=-0.043398 max=0.10866 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1244+4048_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:26:54 2017