! Started logfile: J1235+1233_S_2014_05_31_pus_uvs.log on Mon Nov 28 15:26:42 2016 obs J1235+1233_S_2014_05_31_pus_uva.fits ! Reading UV FITS file: J1235+1233_S_2014_05_31_pus_uva.fits ! AN table 1: 121 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.892746 visibilities/baseline/integration-bin. ! Found source: J1235+1233 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 336 lines of history. ! ! Reading 19444 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1235+1233_S_2014_05_31_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 66 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 66 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 66 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 66 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.968993Jy sigma=0.011469 ! Fit after self-cal, rms=0.938683Jy sigma=0.011143 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.122 mas, bmaj=6.101 mas, bpa=-5.44 degrees ! Estimated noise=668.013 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0476953 Jy ! Component: 100 - total flux cleaned = 0.0587938 Jy ! Total flux subtracted in 100 components = 0.0587938 Jy ! Clean residual min=-0.002791 max=0.006357 Jy/beam ! Clean residual mean=-0.000018 rms=0.000817 Jy/beam ! Combined flux in latest and established models = 0.0587938 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0587938 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073464Jy sigma=0.000792 ! Fit after self-cal, rms=0.073419Jy sigma=0.000791 ! Inverting map ! Added new window around map position (8.5, 4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00605118 Jy ! Component: 100 - total flux cleaned = 0.00989832 Jy ! Total flux subtracted in 100 components = 0.00989832 Jy ! Clean residual min=-0.002352 max=0.003970 Jy/beam ! Clean residual mean=-0.000012 rms=0.000644 Jy/beam ! Combined flux in latest and established models = 0.0686921 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 22 components and 0.0686921 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072702Jy sigma=0.000782 ! Fit after self-cal, rms=0.072642Jy sigma=0.000782 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.868 mas, bmaj=7.243 mas, bpa=-3.778 degrees ! Estimated noise=436.074 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00484908 Jy ! Component: 100 - total flux cleaned = 0.00768794 Jy ! Component: 150 - total flux cleaned = 0.00958482 Jy ! Component: 200 - total flux cleaned = 0.0109051 Jy ! Total flux subtracted in 200 components = 0.0109051 Jy ! Clean residual min=-0.001843 max=0.004354 Jy/beam ! Clean residual mean=-0.000015 rms=0.000525 Jy/beam ! Combined flux in latest and established models = 0.0795972 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 58 components and 0.0795972 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072269Jy sigma=0.000777 ! Fit after self-cal, rms=0.072233Jy sigma=0.000777 ! Inverting map ! Added new window around map position (-10.5, -5.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00318279 Jy ! Component: 100 - total flux cleaned = 0.00505376 Jy ! Component: 150 - total flux cleaned = 0.00645485 Jy ! Component: 200 - total flux cleaned = 0.00755226 Jy ! Total flux subtracted in 200 components = 0.00755226 Jy ! Clean residual min=-0.001485 max=0.001360 Jy/beam ! Clean residual mean=-0.000005 rms=0.000375 Jy/beam ! Combined flux in latest and established models = 0.0871495 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 102 components and 0.0871495 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072068Jy sigma=0.000775 ! Fit after self-cal, rms=0.072062Jy sigma=0.000775 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.80 HN 1.01 KP 1.08 ! LA 1.16 MK 0.94 NL 1.00 OV 0.98 ! PT 1.02 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.99 HN 1.00 KP 0.99 ! LA 1.14 MK 1.02 NL 1.08 OV 1.04 ! PT 0.98 SC 1.09 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.13 HN 1.04 KP 0.90 ! LA 0.94 MK 1.03 NL 0.99 OV 0.94 ! PT 0.98 SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 0.99 HN 0.99 KP 0.91 ! LA 0.85 MK 1.00 NL 1.06 OV 0.98 ! PT 1.04 SC 0.95 ! ! ! Fit before self-cal, rms=0.072062Jy sigma=0.000775 ! Fit after self-cal, rms=0.070404Jy sigma=0.000770 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.869 mas, bmaj=7.257 mas, bpa=-3.824 degrees ! Estimated noise=436.087 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00109441 Jy ! Component: 100 - total flux cleaned = 0.00172692 Jy ! Component: 150 - total flux cleaned = 0.00196541 Jy ! Component: 200 - total flux cleaned = 0.00208611 Jy ! Total flux subtracted in 200 components = 0.00208611 Jy ! Clean residual min=-0.001323 max=0.001254 Jy/beam ! Clean residual mean=-0.000002 rms=0.000306 Jy/beam ! Combined flux in latest and established models = 0.0892356 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 128 components and 0.0892356 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070384Jy sigma=0.000770 ! Fit after self-cal, rms=0.070367Jy sigma=0.000770 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070367Jy sigma=0.000770 ! Fit after self-cal, rms=0.070495Jy sigma=0.000770 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.866 mas, bmaj=7.251 mas, bpa=-3.747 degrees ! Estimated noise=436.227 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000578571 Jy ! Component: 100 - total flux cleaned = 0.000780952 Jy ! Component: 150 - total flux cleaned = 0.000862296 Jy ! Component: 200 - total flux cleaned = 0.000886519 Jy ! Total flux subtracted in 200 components = 0.000886519 Jy ! Clean residual min=-0.001213 max=0.001195 Jy/beam ! Clean residual mean=-0.000002 rms=0.000290 Jy/beam ! Combined flux in latest and established models = 0.0901221 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 142 components and 0.0901221 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070487Jy sigma=0.000769 ! Fit after self-cal, rms=0.070492Jy sigma=0.000769 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000170963 Jy ! Component: 100 - total flux cleaned = 0.000182094 Jy ! Component: 150 - total flux cleaned = 0.000214507 Jy ! Component: 200 - total flux cleaned = 0.000214124 Jy ! Total flux subtracted in 200 components = 0.000214124 Jy ! Clean residual min=-0.001209 max=0.001193 Jy/beam ! Clean residual mean=-0.000002 rms=0.000288 Jy/beam ! Combined flux in latest and established models = 0.0903363 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 150 components and 0.0903363 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070489Jy sigma=0.000769 ! Fit after self-cal, rms=0.070489Jy sigma=0.000769 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070489Jy sigma=0.000769 ! Fit after self-cal, rms=0.070504Jy sigma=0.000769 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.864 mas, bmaj=7.249 mas, bpa=-3.742 degrees ! Estimated noise=436.359 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000270396 Jy ! Component: 100 - total flux cleaned = 0.000311428 Jy ! Component: 150 - total flux cleaned = 0.000330772 Jy ! Component: 200 - total flux cleaned = 0.000331024 Jy ! Total flux subtracted in 200 components = 0.000331024 Jy ! Clean residual min=-0.001187 max=0.001193 Jy/beam ! Clean residual mean=-0.000001 rms=0.000286 Jy/beam ! Combined flux in latest and established models = 0.0906673 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 158 components and 0.0906673 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070501Jy sigma=0.000769 ! Fit after self-cal, rms=0.070501Jy sigma=0.000769 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.04513e-05 Jy ! Component: 100 - total flux cleaned = 6.04809e-05 Jy ! Component: 150 - total flux cleaned = 6.04715e-05 Jy ! Component: 200 - total flux cleaned = 6.88634e-05 Jy ! Total flux subtracted in 200 components = 6.88634e-05 Jy ! Clean residual min=-0.001183 max=0.001187 Jy/beam ! Clean residual mean=-0.000001 rms=0.000285 Jy/beam ! Combined flux in latest and established models = 0.0907362 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 161 components and 0.0907362 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070499Jy sigma=0.000769 ! Fit after self-cal, rms=0.070499Jy sigma=0.000769 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070499Jy sigma=0.000769 ! Fit after self-cal, rms=0.070494Jy sigma=0.000769 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.991 mas, bmaj=10.8 mas, bpa=1.488 degrees ! Estimated noise=518.482 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.88759e-05 Jy ! Component: 100 - total flux cleaned = 0.00017299 Jy ! Component: 150 - total flux cleaned = 0.00019923 Jy ! Component: 200 - total flux cleaned = 0.000215315 Jy ! Total flux subtracted in 200 components = 0.000215315 Jy ! Clean residual min=-0.001265 max=0.001237 Jy/beam ! Clean residual mean=-0.000002 rms=0.000332 Jy/beam ! Combined flux in latest and established models = 0.0909515 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 175 components and 0.0909515 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070493Jy sigma=0.000769 ! Fit after self-cal, rms=0.070492Jy sigma=0.000769 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.56476e-06 Jy ! Component: 100 - total flux cleaned = 2.93721e-05 Jy ! Component: 150 - total flux cleaned = 4.95851e-05 Jy ! Component: 200 - total flux cleaned = 7.41883e-05 Jy ! Total flux subtracted in 200 components = 7.41883e-05 Jy ! Clean residual min=-0.001243 max=0.001230 Jy/beam ! Clean residual mean=-0.000002 rms=0.000331 Jy/beam ! Combined flux in latest and established models = 0.0910257 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 178 components and 0.0910257 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070492Jy sigma=0.000769 ! Fit after self-cal, rms=0.070491Jy sigma=0.000769 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.863 mas, bmaj=7.248 mas, bpa=-3.734 degrees ! Estimated noise=436.453 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.863 x 7.248 at -3.734 degrees (North through East) ! Clean map min=-0.0011344 max=0.060766 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.11 mas, bmaj=6.117 mas, bpa=-5.292 degrees ! Estimated noise=666.833 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.047205 Jy ! Component: 100 - total flux cleaned = 0.0592294 Jy ! Component: 150 - total flux cleaned = 0.0658052 Jy ! Component: 200 - total flux cleaned = 0.0704557 Jy ! Total flux subtracted in 200 components = 0.0704557 Jy ! Clean residual min=-0.002336 max=0.002667 Jy/beam ! Clean residual mean=-0.000012 rms=0.000599 Jy/beam ! Combined flux in latest and established models = 0.0704557 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.0704557 Jy ! Inverting map and beam ! Estimated beam: bmin=3.863 mas, bmaj=7.248 mas, bpa=-3.734 degrees ! Estimated noise=436.453 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00518866 Jy ! Component: 100 - total flux cleaned = 0.00869881 Jy ! Component: 150 - total flux cleaned = 0.0112578 Jy ! Component: 200 - total flux cleaned = 0.0132255 Jy ! Total flux subtracted in 200 components = 0.0132255 Jy ! Clean residual min=-0.001583 max=0.001281 Jy/beam ! Clean residual mean=-0.000011 rms=0.000357 Jy/beam ! Combined flux in latest and established models = 0.0836812 Jy ! Adding 55 model components to the UV plane model. ! The established model now contains 74 components and 0.0836812 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.991 mas, bmaj=10.8 mas, bpa=1.488 degrees ! Estimated noise=518.482 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00222023 Jy ! Component: 100 - total flux cleaned = 0.00366635 Jy ! Component: 150 - total flux cleaned = 0.00470163 Jy ! Component: 200 - total flux cleaned = 0.00545466 Jy ! Total flux subtracted in 200 components = 0.00545466 Jy ! Clean residual min=-0.001439 max=0.001283 Jy/beam ! Clean residual mean=-0.000007 rms=0.000350 Jy/beam ! Combined flux in latest and established models = 0.0891359 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000561534 Jy ! Component: 100 - total flux cleaned = 0.000813733 Jy ! Component: 150 - total flux cleaned = 0.00102595 Jy ! Component: 200 - total flux cleaned = 0.00120588 Jy ! Total flux subtracted in 200 components = 0.00120588 Jy ! Clean residual min=-0.001336 max=0.001263 Jy/beam ! Clean residual mean=-0.000004 rms=0.000338 Jy/beam ! Combined flux in latest and established models = 0.0903418 Jy ! Adding 71 model components to the UV plane model. ! The established model now contains 133 components and 0.0903418 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.863 mas, bmaj=7.248 mas, bpa=-3.734 degrees ! Estimated noise=436.453 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.6265e-05 Jy ! Component: 100 - total flux cleaned = 7.01845e-05 Jy ! Component: 150 - total flux cleaned = 0.000182944 Jy ! Component: 200 - total flux cleaned = 0.000255609 Jy ! Total flux subtracted in 200 components = 0.000255609 Jy ! Clean residual min=-0.001183 max=0.001154 Jy/beam ! Clean residual mean=-0.000002 rms=0.000290 Jy/beam ! Combined flux in latest and established models = 0.0905974 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 146 components and 0.0905974 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070500Jy sigma=0.000769 ! Fit after self-cal, rms=0.070499Jy sigma=0.000769 wmodel J1235+1233_S_2014_05_31_pus_map.mod ! Writing 146 model components to file: J1235+1233_S_2014_05_31_pus_map.mod wobs J1235+1233_S_2014_05_31_pus_uvs.fits ! Writing UV FITS file: J1235+1233_S_2014_05_31_pus_uvs.fits wwins J1235+1233_S_2014_05_31_pus_map.win ! wwins: Wrote 3 windows to J1235+1233_S_2014_05_31_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000198086 Jy ! Component: 100 - total flux cleaned = -0.000358525 Jy ! Component: 150 - total flux cleaned = -0.000530445 Jy ! Component: 200 - total flux cleaned = -0.000676449 Jy ! Component: 250 - total flux cleaned = -0.000834053 Jy ! Component: 300 - total flux cleaned = -0.00100385 Jy ! Component: 350 - total flux cleaned = -0.00118573 Jy ! Component: 400 - total flux cleaned = -0.00133055 Jy ! Component: 450 - total flux cleaned = -0.00148752 Jy ! Component: 500 - total flux cleaned = -0.00162526 Jy ! Component: 550 - total flux cleaned = -0.00177469 Jy ! Component: 600 - total flux cleaned = -0.00190652 Jy ! Component: 650 - total flux cleaned = -0.00204995 Jy ! Component: 700 - total flux cleaned = -0.00216273 Jy ! Component: 750 - total flux cleaned = -0.00225985 Jy ! Component: 800 - total flux cleaned = -0.00239551 Jy ! Component: 850 - total flux cleaned = -0.00244907 Jy ! Component: 900 - total flux cleaned = -0.00254076 Jy ! Component: 950 - total flux cleaned = -0.00257932 Jy ! Component: 1000 - total flux cleaned = -0.00266806 Jy ! Component: 1050 - total flux cleaned = -0.00269304 Jy ! Component: 1100 - total flux cleaned = -0.00277893 Jy ! Component: 1150 - total flux cleaned = -0.00279095 Jy ! Component: 1200 - total flux cleaned = -0.00286292 Jy ! Component: 1250 - total flux cleaned = -0.00294603 Jy ! Component: 1300 - total flux cleaned = -0.00300467 Jy ! Component: 1350 - total flux cleaned = -0.00308574 Jy ! Component: 1400 - total flux cleaned = -0.00320019 Jy ! Component: 1450 - total flux cleaned = -0.00325684 Jy ! Component: 1500 - total flux cleaned = -0.00332405 Jy ! Component: 1550 - total flux cleaned = -0.00341281 Jy ! Component: 1600 - total flux cleaned = -0.00350034 Jy ! Component: 1650 - total flux cleaned = -0.00356523 Jy ! Component: 1700 - total flux cleaned = -0.00358689 Jy ! Component: 1750 - total flux cleaned = -0.00365057 Jy ! Component: 1800 - total flux cleaned = -0.00370321 Jy ! Component: 1850 - total flux cleaned = -0.00373415 Jy ! Component: 1900 - total flux cleaned = -0.00374459 Jy ! Component: 1950 - total flux cleaned = -0.00383641 Jy ! Component: 2000 - total flux cleaned = -0.00388676 Jy ! Component: 2050 - total flux cleaned = -0.0039066 Jy ! Component: 2100 - total flux cleaned = -0.00394638 Jy ! Component: 2150 - total flux cleaned = -0.00402503 Jy ! Component: 2200 - total flux cleaned = -0.00409315 Jy ! Component: 2250 - total flux cleaned = -0.00412218 Jy ! Component: 2300 - total flux cleaned = -0.00417961 Jy ! Component: 2350 - total flux cleaned = -0.00422708 Jy ! Component: 2400 - total flux cleaned = -0.00428363 Jy ! Component: 2450 - total flux cleaned = -0.00433973 Jy ! Component: 2500 - total flux cleaned = -0.00436752 Jy ! Component: 2550 - total flux cleaned = -0.00442293 Jy ! Component: 2600 - total flux cleaned = -0.00445022 Jy ! Component: 2650 - total flux cleaned = -0.0045228 Jy ! Component: 2700 - total flux cleaned = -0.00457685 Jy ! Component: 2750 - total flux cleaned = -0.00458571 Jy ! Component: 2800 - total flux cleaned = -0.00461242 Jy ! Component: 2850 - total flux cleaned = -0.00465655 Jy ! Component: 2900 - total flux cleaned = -0.00470904 Jy ! Component: 2950 - total flux cleaned = -0.00471759 Jy ! Component: 3000 - total flux cleaned = -0.00476086 Jy ! Component: 3050 - total flux cleaned = -0.00481218 Jy ! Component: 3100 - total flux cleaned = -0.00482065 Jy ! Component: 3150 - total flux cleaned = -0.00487139 Jy ! Component: 3200 - total flux cleaned = -0.0048882 Jy ! Component: 3250 - total flux cleaned = -0.00492163 Jy ! Component: 3300 - total flux cleaned = -0.00495479 Jy ! Component: 3350 - total flux cleaned = -0.00496312 Jy ! Component: 3400 - total flux cleaned = -0.00502047 Jy ! Component: 3450 - total flux cleaned = -0.0050693 Jy ! Component: 3500 - total flux cleaned = -0.00506924 Jy ! Component: 3550 - total flux cleaned = -0.00512555 Jy ! Component: 3600 - total flux cleaned = -0.00514152 Jy ! Component: 3650 - total flux cleaned = -0.00517324 Jy ! Component: 3700 - total flux cleaned = -0.00521275 Jy ! Component: 3750 - total flux cleaned = -0.00525197 Jy ! Component: 3800 - total flux cleaned = -0.00531426 Jy ! Component: 3850 - total flux cleaned = -0.0053219 Jy ! Component: 3900 - total flux cleaned = -0.00532185 Jy ! Component: 3950 - total flux cleaned = -0.00540612 Jy ! Component: 4000 - total flux cleaned = -0.0053985 Jy ! Component: 4050 - total flux cleaned = -0.00544389 Jy ! Total flux subtracted in 4096 components = -0.0054439 Jy ! Clean residual min=-0.000501 max=0.000425 Jy/beam ! Clean residual mean=-0.000001 rms=0.000139 Jy/beam ! Combined flux in latest and established models = 0.0851535 Jy keep ! Adding 282 model components to the UV plane model. ! The established model now contains 428 components and 0.0851535 Jy ![Exited script file: muppet] wmap "J1235+1233_S_2014_05_31_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.863 x 7.248 at -3.734 degrees (North through East) ! Clean map min=-0.00089626 max=0.060673 Jy/beam ! Writing clean map to FITS file: J1235+1233_S_2014_05_31_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0606726 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000138318 device "J1235+1233_S_2014_05_31_pus\_map.eps/VPS" ! Attempting to open device: 'J1235+1233_S_2014_05_31_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.683921 0.683921 1.36784 2.73569 5.47137 10.9427 21.8855 43.771 87.5419 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.06 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.863 x 7.248 at -3.734 degrees (North through East) ! Clean map min=-0.00089626 max=0.060673 Jy/beam quit ! Quitting program ! Log file J1235+1233_S_2014_05_31_pus_uvs.log closed on Mon Nov 28 15:26:48 2016