! Started logfile: J1232-1015_X_2014_08_09_pus_uvs.log on Wed Nov 30 14:09:54 2016 obs J1232-1015_X_2014_08_09_pus_uva.fits ! Reading UV FITS file: J1232-1015_X_2014_08_09_pus_uva.fits ! AN table 1: 114 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.890253 visibilities/baseline/integration-bin. ! Found source: J1232-1015 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.44388e+09 3.2e+07 1 3.2e+07 ! 02 2 8.47588e+09 3.2e+07 1 3.2e+07 ! 03 3 8.50788e+09 3.2e+07 1 3.2e+07 ! 04 4 8.53988e+09 3.2e+07 1 3.2e+07 ! 05 5 8.60388e+09 3.2e+07 1 3.2e+07 ! 06 6 8.63588e+09 3.2e+07 1 3.2e+07 ! 07 7 8.69988e+09 3.2e+07 1 3.2e+07 ! 08 8 8.73188e+09 3.2e+07 1 3.2e+07 ! 09 9 8.79588e+09 3.2e+07 1 3.2e+07 ! 10 10 8.82788e+09 3.2e+07 1 3.2e+07 ! 11 11 8.85988e+09 3.2e+07 1 3.2e+07 ! 12 12 8.89188e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 324 lines of history. ! ! Reading 54804 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J1232-1015_X_2014_08_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 63 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 63 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 63 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 63 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 63 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 63 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 63 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 63 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 63 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 63 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 63 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 63 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.928667Jy sigma=0.010069 ! Fit after self-cal, rms=0.901453Jy sigma=0.009768 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6964 mas, bmaj=1.708 mas, bpa=-1.385 degrees ! Estimated noise=543.564 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0747585 Jy ! Component: 100 - total flux cleaned = 0.095585 Jy ! Total flux subtracted in 100 components = 0.095585 Jy ! Clean residual min=-0.005020 max=0.009411 Jy/beam ! Clean residual mean=0.000027 rms=0.001485 Jy/beam ! Combined flux in latest and established models = 0.095585 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.095585 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081277Jy sigma=0.000837 ! Fit after self-cal, rms=0.081207Jy sigma=0.000836 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0109032 Jy ! Component: 100 - total flux cleaned = 0.0168754 Jy ! Total flux subtracted in 100 components = 0.0168754 Jy ! Clean residual min=-0.004949 max=0.005311 Jy/beam ! Clean residual mean=0.000012 rms=0.001098 Jy/beam ! Combined flux in latest and established models = 0.11246 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 14 components and 0.11246 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.079215Jy sigma=0.000814 ! Fit after self-cal, rms=0.079207Jy sigma=0.000814 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8293 mas, bmaj=1.965 mas, bpa=-1.12 degrees ! Estimated noise=281.735 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1, -0.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00713739 Jy ! Component: 100 - total flux cleaned = 0.0109591 Jy ! Component: 150 - total flux cleaned = 0.0129108 Jy ! Component: 200 - total flux cleaned = 0.014025 Jy ! Total flux subtracted in 200 components = 0.014025 Jy ! Clean residual min=-0.005152 max=0.003986 Jy/beam ! Clean residual mean=0.000004 rms=0.001080 Jy/beam ! Combined flux in latest and established models = 0.126485 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 33 components and 0.126485 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078469Jy sigma=0.000807 ! Fit after self-cal, rms=0.078444Jy sigma=0.000806 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.12 HN 1.10 KP 0.94 ! LA 1.03 MK 0.92 NL 0.95 OV 0.96 ! PT 1.01 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.15 HN 1.12 KP 0.86 ! LA 1.03 MK 0.93 NL 0.96 OV 0.96 ! PT 0.95 SC 1.33 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.11 HN 1.12 KP 0.81 ! LA 1.06 MK 0.93 NL 0.96 OV 0.97 ! PT 0.95 SC 0.98 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 1.06 HN 1.18 KP 0.81 ! LA 1.06 MK 0.90 NL 0.94 OV 0.96 ! PT 0.98 SC 0.96 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.13 HN 1.29 KP 0.75 ! LA 1.06 MK 0.95 NL 0.97 OV 0.99 ! PT 0.99 SC 0.96 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.14 HN 1.09 KP 0.73 ! LA 1.05 MK 1.22 NL 1.00 OV 0.98 ! PT 0.96 SC 1.00 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.25 HN 1.26 KP 0.79 ! LA 1.11 MK 0.96 NL 1.04 OV 1.04 ! PT 1.02 SC 1.01 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.20 HN 1.20 KP 0.73 ! LA 1.01 MK 1.24 NL 0.95 OV 1.00 ! PT 0.98 SC 0.96 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.11 HN 1.10 KP 0.76 ! LA 1.04 MK 1.20 NL 0.99 OV 1.01 ! PT 0.94 SC 1.02 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 1.16 HN 1.13 KP 0.79 ! LA 1.07 MK 0.94 NL 0.98 OV 1.31 ! PT 0.98 SC 0.97 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 1.12 HN 1.09 KP 0.84 ! LA 1.06 MK 0.95 NL 1.02 OV 0.98 ! PT 0.95 SC 0.97 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 1.13 HN 1.12 KP 0.86 ! LA 1.03 MK 1.16 NL 0.98 OV 0.96 ! PT 0.95 SC 1.04 ! ! ! Fit before self-cal, rms=0.078444Jy sigma=0.000806 ! Fit after self-cal, rms=0.078423Jy sigma=0.000787 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8381 mas, bmaj=1.965 mas, bpa=-0.7279 degrees ! Estimated noise=279.893 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000264315 Jy ! Component: 100 - total flux cleaned = 0.000267326 Jy ! Component: 150 - total flux cleaned = 0.000243617 Jy ! Component: 200 - total flux cleaned = 0.000203601 Jy ! Total flux subtracted in 200 components = 0.000203601 Jy ! Clean residual min=-0.001268 max=0.001322 Jy/beam ! Clean residual mean=-0.000002 rms=0.000340 Jy/beam ! Combined flux in latest and established models = 0.126689 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 49 components and 0.126689 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078406Jy sigma=0.000787 ! Fit after self-cal, rms=0.078503Jy sigma=0.000786 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078503Jy sigma=0.000786 ! Fit after self-cal, rms=0.080631Jy sigma=0.000782 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8379 mas, bmaj=1.963 mas, bpa=-0.7281 degrees ! Estimated noise=279.571 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000117075 Jy ! Component: 100 - total flux cleaned = -0.000117576 Jy ! Component: 150 - total flux cleaned = -0.000101567 Jy ! Component: 200 - total flux cleaned = -0.000101498 Jy ! Total flux subtracted in 200 components = -0.000101498 Jy ! Clean residual min=-0.001123 max=0.001187 Jy/beam ! Clean residual mean=0.000003 rms=0.000260 Jy/beam ! Combined flux in latest and established models = 0.126588 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 59 components and 0.126588 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080623Jy sigma=0.000782 ! Fit after self-cal, rms=0.080676Jy sigma=0.000781 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (15.8, -7.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00113349 Jy ! Component: 100 - total flux cleaned = 0.00175397 Jy ! Component: 150 - total flux cleaned = 0.00210781 Jy ! Component: 200 - total flux cleaned = 0.00222416 Jy ! Total flux subtracted in 200 components = 0.00222416 Jy ! Clean residual min=-0.000983 max=0.000874 Jy/beam ! Clean residual mean=0.000003 rms=0.000223 Jy/beam ! Combined flux in latest and established models = 0.128812 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 78 components and 0.128812 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080660Jy sigma=0.000781 ! Fit after self-cal, rms=0.080660Jy sigma=0.000781 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080660Jy sigma=0.000781 ! Fit after self-cal, rms=0.080802Jy sigma=0.000781 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8381 mas, bmaj=1.962 mas, bpa=-0.7611 degrees ! Estimated noise=279.535 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000199126 Jy ! Component: 100 - total flux cleaned = 0.000340935 Jy ! Component: 150 - total flux cleaned = 0.000416328 Jy ! Component: 200 - total flux cleaned = 0.000439069 Jy ! Total flux subtracted in 200 components = 0.000439069 Jy ! Clean residual min=-0.000946 max=0.000851 Jy/beam ! Clean residual mean=0.000002 rms=0.000214 Jy/beam ! Combined flux in latest and established models = 0.129251 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 87 components and 0.129251 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080797Jy sigma=0.000781 ! Fit after self-cal, rms=0.080798Jy sigma=0.000781 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.13595e-05 Jy ! Component: 100 - total flux cleaned = 3.19632e-05 Jy ! Component: 150 - total flux cleaned = 5.17696e-05 Jy ! Component: 200 - total flux cleaned = 7.0875e-05 Jy ! Total flux subtracted in 200 components = 7.0875e-05 Jy ! Clean residual min=-0.000933 max=0.000855 Jy/beam ! Clean residual mean=0.000002 rms=0.000211 Jy/beam ! Combined flux in latest and established models = 0.129322 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 92 components and 0.129322 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080795Jy sigma=0.000781 ! Fit after self-cal, rms=0.080795Jy sigma=0.000781 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080795Jy sigma=0.000781 ! Fit after self-cal, rms=0.080835Jy sigma=0.000781 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.091 mas, bmaj=3.686 mas, bpa=2.584 degrees ! Estimated noise=355.963 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000414515 Jy ! Component: 100 - total flux cleaned = 0.000503697 Jy ! Component: 150 - total flux cleaned = 0.000542852 Jy ! Component: 200 - total flux cleaned = 0.000580127 Jy ! Total flux subtracted in 200 components = 0.000580127 Jy ! Clean residual min=-0.000855 max=0.001126 Jy/beam ! Clean residual mean=0.000005 rms=0.000268 Jy/beam ! Combined flux in latest and established models = 0.129902 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 106 components and 0.129902 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080834Jy sigma=0.000781 ! Fit after self-cal, rms=0.080833Jy sigma=0.000781 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.13317e-05 Jy ! Component: 100 - total flux cleaned = 4.93992e-05 Jy ! Component: 150 - total flux cleaned = 6.53303e-05 Jy ! Component: 200 - total flux cleaned = 7.56261e-05 Jy ! Total flux subtracted in 200 components = 7.56261e-05 Jy ! Clean residual min=-0.000836 max=0.001120 Jy/beam ! Clean residual mean=0.000005 rms=0.000267 Jy/beam ! Combined flux in latest and established models = 0.129977 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 111 components and 0.129977 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080833Jy sigma=0.000781 ! Fit after self-cal, rms=0.080833Jy sigma=0.000781 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.8382 mas, bmaj=1.962 mas, bpa=-0.7891 degrees ! Estimated noise=279.594 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8382 x 1.962 at -0.7891 degrees (North through East) ! Clean map min=-0.00078892 max=0.098714 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7037 mas, bmaj=1.701 mas, bpa=-0.9838 degrees ! Estimated noise=538.035 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0737387 Jy ! Component: 100 - total flux cleaned = 0.0949103 Jy ! Component: 150 - total flux cleaned = 0.105701 Jy ! Component: 200 - total flux cleaned = 0.111681 Jy ! Total flux subtracted in 200 components = 0.111681 Jy ! Clean residual min=-0.002108 max=0.003045 Jy/beam ! Clean residual mean=0.000011 rms=0.000626 Jy/beam ! Combined flux in latest and established models = 0.111681 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.111681 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8382 mas, bmaj=1.962 mas, bpa=-0.7891 degrees ! Estimated noise=279.594 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00567349 Jy ! Component: 100 - total flux cleaned = 0.00872368 Jy ! Component: 150 - total flux cleaned = 0.0106809 Jy ! Component: 200 - total flux cleaned = 0.0121321 Jy ! Total flux subtracted in 200 components = 0.0121321 Jy ! Clean residual min=-0.001067 max=0.001094 Jy/beam ! Clean residual mean=0.000007 rms=0.000293 Jy/beam ! Combined flux in latest and established models = 0.123813 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 46 components and 0.123813 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.091 mas, bmaj=3.686 mas, bpa=2.584 degrees ! Estimated noise=355.963 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00185168 Jy ! Component: 100 - total flux cleaned = 0.003074 Jy ! Component: 150 - total flux cleaned = 0.00396143 Jy ! Component: 200 - total flux cleaned = 0.00457372 Jy ! Total flux subtracted in 200 components = 0.00457372 Jy ! Clean residual min=-0.000991 max=0.001308 Jy/beam ! Clean residual mean=0.000007 rms=0.000310 Jy/beam ! Combined flux in latest and established models = 0.128387 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000295728 Jy ! Component: 100 - total flux cleaned = 0.000543049 Jy ! Component: 150 - total flux cleaned = 0.00072443 Jy ! Component: 200 - total flux cleaned = 0.000855537 Jy ! Total flux subtracted in 200 components = 0.000855537 Jy ! Clean residual min=-0.000943 max=0.001240 Jy/beam ! Clean residual mean=0.000006 rms=0.000286 Jy/beam ! Combined flux in latest and established models = 0.129242 Jy ! Adding 58 model components to the UV plane model. ! The established model now contains 92 components and 0.129242 Jy ! Inverting map ! Added new window around map position (10, -6.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00104857 Jy ! Component: 100 - total flux cleaned = 0.00142609 Jy ! Component: 150 - total flux cleaned = 0.00160744 Jy ! Component: 200 - total flux cleaned = 0.00175161 Jy ! Total flux subtracted in 200 components = 0.00175161 Jy ! Clean residual min=-0.000877 max=0.000870 Jy/beam ! Clean residual mean=0.000003 rms=0.000230 Jy/beam ! Combined flux in latest and established models = 0.130994 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 115 components and 0.130994 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8382 mas, bmaj=1.962 mas, bpa=-0.7891 degrees ! Estimated noise=279.594 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000289454 Jy ! Component: 100 - total flux cleaned = -0.000431718 Jy ! Component: 150 - total flux cleaned = -0.00049414 Jy ! Component: 200 - total flux cleaned = -0.000551876 Jy ! Total flux subtracted in 200 components = -0.000551876 Jy ! Clean residual min=-0.000805 max=0.000720 Jy/beam ! Clean residual mean=0.000001 rms=0.000190 Jy/beam ! Combined flux in latest and established models = 0.130442 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 133 components and 0.130442 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080826Jy sigma=0.000781 ! Fit after self-cal, rms=0.080819Jy sigma=0.000781 wmodel J1232-1015_X_2014_08_09_pus_map.mod ! Writing 133 model components to file: J1232-1015_X_2014_08_09_pus_map.mod wobs J1232-1015_X_2014_08_09_pus_uvs.fits ! Writing UV FITS file: J1232-1015_X_2014_08_09_pus_uvs.fits wwins J1232-1015_X_2014_08_09_pus_map.win ! wwins: Wrote 4 windows to J1232-1015_X_2014_08_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000234171 Jy ! Component: 100 - total flux cleaned = -0.000324734 Jy ! Component: 150 - total flux cleaned = -0.00038643 Jy ! Component: 200 - total flux cleaned = -0.000409774 Jy ! Component: 250 - total flux cleaned = -0.000410056 Jy ! Component: 300 - total flux cleaned = -0.000410122 Jy ! Component: 350 - total flux cleaned = -0.00036842 Jy ! Component: 400 - total flux cleaned = -0.000378651 Jy ! Component: 450 - total flux cleaned = -0.00034926 Jy ! Component: 500 - total flux cleaned = -0.000339711 Jy ! Component: 550 - total flux cleaned = -0.000320888 Jy ! Component: 600 - total flux cleaned = -0.00029344 Jy ! Component: 650 - total flux cleaned = -0.000284747 Jy ! Component: 700 - total flux cleaned = -0.000293748 Jy ! Component: 750 - total flux cleaned = -0.000328125 Jy ! Component: 800 - total flux cleaned = -0.000336599 Jy ! Component: 850 - total flux cleaned = -0.000336669 Jy ! Component: 900 - total flux cleaned = -0.000360937 Jy ! Component: 950 - total flux cleaned = -0.000345058 Jy ! Component: 1000 - total flux cleaned = -0.0003529 Jy ! Component: 1050 - total flux cleaned = -0.000360607 Jy ! Component: 1100 - total flux cleaned = -0.000360568 Jy ! Component: 1150 - total flux cleaned = -0.000375427 Jy ! Component: 1200 - total flux cleaned = -0.000390018 Jy ! Component: 1250 - total flux cleaned = -0.000389971 Jy ! Component: 1300 - total flux cleaned = -0.000404347 Jy ! Component: 1350 - total flux cleaned = -0.000397293 Jy ! Component: 1400 - total flux cleaned = -0.000404329 Jy ! Component: 1450 - total flux cleaned = -0.000397391 Jy ! Component: 1500 - total flux cleaned = -0.000383693 Jy ! Component: 1550 - total flux cleaned = -0.000356823 Jy ! Component: 1600 - total flux cleaned = -0.000330273 Jy ! Component: 1650 - total flux cleaned = -0.000323701 Jy ! Component: 1700 - total flux cleaned = -0.000304244 Jy ! Component: 1750 - total flux cleaned = -0.0003106 Jy ! Component: 1800 - total flux cleaned = -0.00029786 Jy ! Component: 1850 - total flux cleaned = -0.000279017 Jy ! Component: 1900 - total flux cleaned = -0.000291441 Jy ! Component: 1950 - total flux cleaned = -0.000272853 Jy ! Component: 2000 - total flux cleaned = -0.000248522 Jy ! Total flux subtracted in 2048 components = -0.000254544 Jy ! Clean residual min=-0.000384 max=0.000471 Jy/beam ! Clean residual mean=0.000001 rms=0.000111 Jy/beam ! Combined flux in latest and established models = 0.130188 Jy keep ! Adding 142 model components to the UV plane model. ! The established model now contains 275 components and 0.130188 Jy ![Exited script file: muppet] wmap "J1232-1015_X_2014_08_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8382 x 1.962 at -0.7891 degrees (North through East) ! Clean map min=-0.00062473 max=0.099121 Jy/beam ! Writing clean map to FITS file: J1232-1015_X_2014_08_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0991211 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000110358 device "J1232-1015_X_2014_08_09_pus\_map.eps/VPS" ! Attempting to open device: 'J1232-1015_X_2014_08_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.334011 0.334011 0.668021 1.33604 2.67208 5.34417 10.6883 21.3767 42.7533 85.5067 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.099 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8382 x 1.962 at -0.7891 degrees (North through East) ! Clean map min=-0.00062473 max=0.099121 Jy/beam quit ! Quitting program ! Log file J1232-1015_X_2014_08_09_pus_uvs.log closed on Wed Nov 30 14:09:58 2016