! Started logfile: J1232-0224_S_2014_06_09_pus_uvs.log on Wed Nov 16 19:53:36 2016 obs J1232-0224_S_2014_06_09_pus_uva.fits ! Reading UV FITS file: J1232-0224_S_2014_06_09_pus_uva.fits ! AN table 1: 72 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.605556 visibilities/baseline/integration-bin. ! Found source: J1232-0224 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 336 lines of history. ! ! Reading 7848 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1232-0224_S_2014_06_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 153 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 153 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 153 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 153 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.742290Jy sigma=0.008032 ! Fit after self-cal, rms=0.720954Jy sigma=0.007762 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.863 mas, bmaj=9.058 mas, bpa=14.71 degrees ! Estimated noise=1034.92 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.218188 Jy ! Component: 100 - total flux cleaned = 0.290966 Jy ! Total flux subtracted in 100 components = 0.290966 Jy ! Clean residual min=-0.035690 max=0.095936 Jy/beam ! Clean residual mean=0.000277 rms=0.012000 Jy/beam ! Combined flux in latest and established models = 0.290966 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.290966 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.191314Jy sigma=0.002062 ! Fit after self-cal, rms=0.191162Jy sigma=0.002061 ! Inverting map ! Added new window around map position (-9, -3.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0887291 Jy ! Component: 100 - total flux cleaned = 0.1357 Jy ! Total flux subtracted in 100 components = 0.1357 Jy ! Clean residual min=-0.022913 max=0.042567 Jy/beam ! Clean residual mean=0.000170 rms=0.007336 Jy/beam ! Combined flux in latest and established models = 0.426666 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 27 components and 0.426666 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133405Jy sigma=0.001411 ! Fit after self-cal, rms=0.122104Jy sigma=0.001279 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0462997 Jy ! Component: 100 - total flux cleaned = 0.072636 Jy ! Total flux subtracted in 100 components = 0.072636 Jy ! Clean residual min=-0.012708 max=0.018294 Jy/beam ! Clean residual mean=0.000085 rms=0.003920 Jy/beam ! Combined flux in latest and established models = 0.499302 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 48 components and 0.499302 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098165Jy sigma=0.001017 ! Fit after self-cal, rms=0.095619Jy sigma=0.000986 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0236591 Jy ! Component: 100 - total flux cleaned = 0.0380966 Jy ! Total flux subtracted in 100 components = 0.0380966 Jy ! Clean residual min=-0.009654 max=0.010583 Jy/beam ! Clean residual mean=0.000047 rms=0.002507 Jy/beam ! Combined flux in latest and established models = 0.537399 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 61 components and 0.537399 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088111Jy sigma=0.000912 ! Fit after self-cal, rms=0.087518Jy sigma=0.000905 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.585 mas, bmaj=10.38 mas, bpa=11.97 degrees ! Estimated noise=742.1 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0133049 Jy ! Component: 100 - total flux cleaned = 0.0206075 Jy ! Component: 150 - total flux cleaned = 0.0253189 Jy ! Component: 200 - total flux cleaned = 0.0267281 Jy ! Total flux subtracted in 200 components = 0.0267281 Jy ! Clean residual min=-0.006555 max=0.006051 Jy/beam ! Clean residual mean=0.000027 rms=0.001657 Jy/beam ! Combined flux in latest and established models = 0.564127 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 96 components and 0.564127 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084953Jy sigma=0.000887 ! Fit after self-cal, rms=0.084796Jy sigma=0.000885 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.86 HN 0.99 KP 1.05 ! LA 1.19 MK 1.00* NL 0.98 OV 0.97 ! PT 1.00 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 1.00 KP 1.02 ! LA 1.13 MK 1.00* NL 1.03 OV 1.02 ! PT 0.99 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.15 HN 1.01 KP 0.91 ! LA 0.90 MK 1.00* NL 1.00 OV 0.95 ! PT 0.97 SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 0.98 KP 0.89 ! LA 0.87 MK 1.00* NL 1.04 OV 1.03 ! PT 1.01 SC 0.94 ! ! ! Fit before self-cal, rms=0.084796Jy sigma=0.000885 ! Fit after self-cal, rms=0.074396Jy sigma=0.000778 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.561 mas, bmaj=10.37 mas, bpa=12.1 degrees ! Estimated noise=738.461 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000244115 Jy ! Component: 100 - total flux cleaned = 0.000371917 Jy ! Component: 150 - total flux cleaned = 0.000586612 Jy ! Component: 200 - total flux cleaned = 0.000879969 Jy ! Total flux subtracted in 200 components = 0.000879969 Jy ! Clean residual min=-0.003694 max=0.004005 Jy/beam ! Clean residual mean=0.000020 rms=0.001035 Jy/beam ! Combined flux in latest and established models = 0.565007 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 105 components and 0.565007 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074030Jy sigma=0.000774 ! Fit after self-cal, rms=0.074000Jy sigma=0.000774 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074000Jy sigma=0.000774 ! Fit after self-cal, rms=0.073616Jy sigma=0.000771 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.564 mas, bmaj=10.35 mas, bpa=12 degrees ! Estimated noise=737.42 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000196843 Jy ! Component: 100 - total flux cleaned = 0.00011744 Jy ! Component: 150 - total flux cleaned = 0.000111876 Jy ! Component: 200 - total flux cleaned = 0.000172874 Jy ! Total flux subtracted in 200 components = 0.000172874 Jy ! Clean residual min=-0.003047 max=0.003417 Jy/beam ! Clean residual mean=0.000015 rms=0.000873 Jy/beam ! Combined flux in latest and established models = 0.56518 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 116 components and 0.56518 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073477Jy sigma=0.000769 ! Fit after self-cal, rms=0.073472Jy sigma=0.000769 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000217862 Jy ! Component: 100 - total flux cleaned = 0.000216384 Jy ! Component: 150 - total flux cleaned = 0.000267406 Jy ! Component: 200 - total flux cleaned = 0.000363746 Jy ! Total flux subtracted in 200 components = 0.000363746 Jy ! Clean residual min=-0.002873 max=0.003489 Jy/beam ! Clean residual mean=0.000014 rms=0.000840 Jy/beam ! Combined flux in latest and established models = 0.565543 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 123 components and 0.565543 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073397Jy sigma=0.000768 ! Fit after self-cal, rms=0.073391Jy sigma=0.000768 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073391Jy sigma=0.000768 ! Fit after self-cal, rms=0.073343Jy sigma=0.000768 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.564 mas, bmaj=10.35 mas, bpa=12 degrees ! Estimated noise=736.973 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000254687 Jy ! Component: 100 - total flux cleaned = 0.000253919 Jy ! Component: 150 - total flux cleaned = 0.000254484 Jy ! Component: 200 - total flux cleaned = 0.000335945 Jy ! Total flux subtracted in 200 components = 0.000335945 Jy ! Clean residual min=-0.002683 max=0.003514 Jy/beam ! Clean residual mean=0.000013 rms=0.000808 Jy/beam ! Combined flux in latest and established models = 0.565879 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 128 components and 0.565879 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073289Jy sigma=0.000768 ! Fit after self-cal, rms=0.073284Jy sigma=0.000768 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-33, -14.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00329333 Jy ! Component: 100 - total flux cleaned = 0.00477514 Jy ! Component: 150 - total flux cleaned = 0.0057051 Jy ! Component: 200 - total flux cleaned = 0.0063295 Jy ! Total flux subtracted in 200 components = 0.0063295 Jy ! Clean residual min=-0.002493 max=0.002847 Jy/beam ! Clean residual mean=0.000012 rms=0.000714 Jy/beam ! Combined flux in latest and established models = 0.572209 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 157 components and 0.572209 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073111Jy sigma=0.000766 ! Fit after self-cal, rms=0.073105Jy sigma=0.000766 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073105Jy sigma=0.000766 ! Fit after self-cal, rms=0.073077Jy sigma=0.000766 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.901 mas, bmaj=15.14 mas, bpa=-5.139 degrees ! Estimated noise=835.97 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00154916 Jy ! Component: 100 - total flux cleaned = 0.00189106 Jy ! Component: 150 - total flux cleaned = 0.0020656 Jy ! Component: 200 - total flux cleaned = 0.00215378 Jy ! Total flux subtracted in 200 components = 0.00215378 Jy ! Clean residual min=-0.002910 max=0.002779 Jy/beam ! Clean residual mean=0.000016 rms=0.000851 Jy/beam ! Combined flux in latest and established models = 0.574363 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 169 components and 0.574363 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073056Jy sigma=0.000766 ! Fit after self-cal, rms=0.073053Jy sigma=0.000766 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000375392 Jy ! Component: 100 - total flux cleaned = 0.00048711 Jy ! Component: 150 - total flux cleaned = 0.000535827 Jy ! Component: 200 - total flux cleaned = 0.000579902 Jy ! Total flux subtracted in 200 components = 0.000579902 Jy ! Clean residual min=-0.002841 max=0.002685 Jy/beam ! Clean residual mean=0.000014 rms=0.000834 Jy/beam ! Combined flux in latest and established models = 0.574942 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 179 components and 0.574943 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073046Jy sigma=0.000766 ! Fit after self-cal, rms=0.073044Jy sigma=0.000766 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.563 mas, bmaj=10.35 mas, bpa=11.98 degrees ! Estimated noise=736.499 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.563 x 10.35 at 11.98 degrees (North through East) ! Clean map min=-0.0023295 max=0.26753 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.852 mas, bmaj=9.036 mas, bpa=14.69 degrees ! Estimated noise=1019.36 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.227583 Jy ! Component: 100 - total flux cleaned = 0.32854 Jy ! Component: 150 - total flux cleaned = 0.396314 Jy ! Component: 200 - total flux cleaned = 0.442809 Jy ! Total flux subtracted in 200 components = 0.442809 Jy ! Clean residual min=-0.011956 max=0.025600 Jy/beam ! Clean residual mean=0.000087 rms=0.004414 Jy/beam ! Combined flux in latest and established models = 0.442809 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.442809 Jy ! Inverting map and beam ! Estimated beam: bmin=4.563 mas, bmaj=10.35 mas, bpa=11.98 degrees ! Estimated noise=736.499 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0450041 Jy ! Component: 100 - total flux cleaned = 0.071818 Jy ! Component: 150 - total flux cleaned = 0.0886397 Jy ! Component: 200 - total flux cleaned = 0.0996975 Jy ! Total flux subtracted in 200 components = 0.0996975 Jy ! Clean residual min=-0.004708 max=0.006673 Jy/beam ! Clean residual mean=0.000038 rms=0.001416 Jy/beam ! Combined flux in latest and established models = 0.542507 Jy ! Adding 63 model components to the UV plane model. ! The established model now contains 71 components and 0.542506 Jy ! Inverting map ! Added new window around map position (-14.5, -4.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00775328 Jy ! Component: 100 - total flux cleaned = 0.0131619 Jy ! Component: 150 - total flux cleaned = 0.017292 Jy ! Component: 200 - total flux cleaned = 0.0205495 Jy ! Total flux subtracted in 200 components = 0.0205495 Jy ! Clean residual min=-0.003065 max=0.002755 Jy/beam ! Clean residual mean=0.000018 rms=0.000806 Jy/beam ! Combined flux in latest and established models = 0.563056 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 102 components and 0.563056 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.901 mas, bmaj=15.14 mas, bpa=-5.139 degrees ! Estimated noise=835.97 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00357064 Jy ! Component: 100 - total flux cleaned = 0.00619178 Jy ! Component: 150 - total flux cleaned = 0.00787292 Jy ! Component: 200 - total flux cleaned = 0.00885126 Jy ! Total flux subtracted in 200 components = 0.00885126 Jy ! Clean residual min=-0.003060 max=0.003195 Jy/beam ! Clean residual mean=0.000017 rms=0.000886 Jy/beam ! Combined flux in latest and established models = 0.571907 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000781628 Jy ! Component: 100 - total flux cleaned = 0.00135438 Jy ! Component: 150 - total flux cleaned = 0.00163297 Jy ! Component: 200 - total flux cleaned = 0.00196691 Jy ! Total flux subtracted in 200 components = 0.00196691 Jy ! Clean residual min=-0.002947 max=0.002949 Jy/beam ! Clean residual mean=0.000015 rms=0.000842 Jy/beam ! Combined flux in latest and established models = 0.573874 Jy ! Adding 78 model components to the UV plane model. ! The established model now contains 171 components and 0.573874 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.563 mas, bmaj=10.35 mas, bpa=11.98 degrees ! Estimated noise=736.499 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000183293 Jy ! Component: 100 - total flux cleaned = -0.000139047 Jy ! Component: 150 - total flux cleaned = -0.000173937 Jy ! Component: 200 - total flux cleaned = -0.000207578 Jy ! Total flux subtracted in 200 components = -0.000207578 Jy ! Clean residual min=-0.002063 max=0.002220 Jy/beam ! Clean residual mean=0.000010 rms=0.000633 Jy/beam ! Combined flux in latest and established models = 0.573667 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 191 components and 0.573667 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072915Jy sigma=0.000764 ! Fit after self-cal, rms=0.072894Jy sigma=0.000764 wmodel J1232-0224_S_2014_06_09_pus_map.mod ! Writing 191 model components to file: J1232-0224_S_2014_06_09_pus_map.mod wobs J1232-0224_S_2014_06_09_pus_uvs.fits ! Writing UV FITS file: J1232-0224_S_2014_06_09_pus_uvs.fits wwins J1232-0224_S_2014_06_09_pus_map.win ! wwins: Wrote 4 windows to J1232-0224_S_2014_06_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000291114 Jy ! Component: 100 - total flux cleaned = 0.000326867 Jy ! Component: 150 - total flux cleaned = 0.000431126 Jy ! Component: 200 - total flux cleaned = 0.0004643 Jy ! Component: 250 - total flux cleaned = 0.000465044 Jy ! Component: 300 - total flux cleaned = 0.000555986 Jy ! Component: 350 - total flux cleaned = 0.000525995 Jy ! Component: 400 - total flux cleaned = 0.000527049 Jy ! Component: 450 - total flux cleaned = 0.000555473 Jy ! Component: 500 - total flux cleaned = 0.000501552 Jy ! Component: 550 - total flux cleaned = 0.000501596 Jy ! Component: 600 - total flux cleaned = 0.000526991 Jy ! Component: 650 - total flux cleaned = 0.000552136 Jy ! Component: 700 - total flux cleaned = 0.000601627 Jy ! Component: 750 - total flux cleaned = 0.00062561 Jy ! Component: 800 - total flux cleaned = 0.000696565 Jy ! Component: 850 - total flux cleaned = 0.000788662 Jy ! Component: 900 - total flux cleaned = 0.000810408 Jy ! Component: 950 - total flux cleaned = 0.000831978 Jy ! Component: 1000 - total flux cleaned = 0.000875358 Jy ! Component: 1050 - total flux cleaned = 0.000874894 Jy ! Component: 1100 - total flux cleaned = 0.000833172 Jy ! Component: 1150 - total flux cleaned = 0.000874166 Jy ! Component: 1200 - total flux cleaned = 0.000853591 Jy ! Component: 1250 - total flux cleaned = 0.000814399 Jy ! Component: 1300 - total flux cleaned = 0.000834065 Jy ! Component: 1350 - total flux cleaned = 0.000872423 Jy ! Component: 1400 - total flux cleaned = 0.000928596 Jy ! Component: 1450 - total flux cleaned = 0.000965057 Jy ! Component: 1500 - total flux cleaned = 0.00101928 Jy ! Component: 1550 - total flux cleaned = 0.00110826 Jy ! Component: 1600 - total flux cleaned = 0.0011436 Jy ! Component: 1650 - total flux cleaned = 0.00124765 Jy ! Component: 1700 - total flux cleaned = 0.00136718 Jy ! Component: 1750 - total flux cleaned = 0.00145129 Jy ! Component: 1800 - total flux cleaned = 0.00150148 Jy ! Component: 1850 - total flux cleaned = 0.00163291 Jy ! Component: 1900 - total flux cleaned = 0.00174651 Jy ! Component: 1950 - total flux cleaned = 0.00184264 Jy ! Component: 2000 - total flux cleaned = 0.00196888 Jy ! Component: 2050 - total flux cleaned = 0.00200038 Jy ! Component: 2100 - total flux cleaned = 0.00209297 Jy ! Component: 2150 - total flux cleaned = 0.0021083 Jy ! Component: 2200 - total flux cleaned = 0.00218377 Jy ! Component: 2250 - total flux cleaned = 0.0022884 Jy ! Component: 2300 - total flux cleaned = 0.00236183 Jy ! Component: 2350 - total flux cleaned = 0.00239079 Jy ! Component: 2400 - total flux cleaned = 0.00243396 Jy ! Component: 2450 - total flux cleaned = 0.00247654 Jy ! Component: 2500 - total flux cleaned = 0.00253297 Jy ! Component: 2550 - total flux cleaned = 0.00263099 Jy ! Component: 2600 - total flux cleaned = 0.00268636 Jy ! Component: 2650 - total flux cleaned = 0.00279546 Jy ! Component: 2700 - total flux cleaned = 0.00289004 Jy ! Component: 2750 - total flux cleaned = 0.0029436 Jy ! Component: 2800 - total flux cleaned = 0.00302328 Jy ! Component: 2850 - total flux cleaned = 0.00308899 Jy ! Component: 2900 - total flux cleaned = 0.00315408 Jy ! Component: 2950 - total flux cleaned = 0.00320595 Jy ! Component: 3000 - total flux cleaned = 0.00330884 Jy ! Component: 3050 - total flux cleaned = 0.00341055 Jy ! Component: 3100 - total flux cleaned = 0.00344843 Jy ! Component: 3150 - total flux cleaned = 0.00353611 Jy ! Component: 3200 - total flux cleaned = 0.00358563 Jy ! Component: 3250 - total flux cleaned = 0.00368385 Jy ! Component: 3300 - total flux cleaned = 0.00373249 Jy ! Component: 3350 - total flux cleaned = 0.00380496 Jy ! Component: 3400 - total flux cleaned = 0.00385289 Jy ! Component: 3450 - total flux cleaned = 0.00397174 Jy ! Component: 3500 - total flux cleaned = 0.0040069 Jy ! Component: 3550 - total flux cleaned = 0.00408886 Jy ! Component: 3600 - total flux cleaned = 0.00415841 Jy ! Component: 3650 - total flux cleaned = 0.0042158 Jy ! Component: 3700 - total flux cleaned = 0.00431862 Jy ! Component: 3750 - total flux cleaned = 0.00438659 Jy ! Component: 3800 - total flux cleaned = 0.00448793 Jy ! Component: 3850 - total flux cleaned = 0.00456605 Jy ! Component: 3900 - total flux cleaned = 0.00459916 Jy ! Component: 3950 - total flux cleaned = 0.00466526 Jy ! Component: 4000 - total flux cleaned = 0.00474171 Jy ! Component: 4050 - total flux cleaned = 0.004796 Jy ! Total flux subtracted in 4096 components = 0.00484981 Jy ! Clean residual min=-0.000633 max=0.000609 Jy/beam ! Clean residual mean=0.000003 rms=0.000211 Jy/beam ! Combined flux in latest and established models = 0.578516 Jy keep ! Adding 332 model components to the UV plane model. ! The established model now contains 523 components and 0.578517 Jy ![Exited script file: muppet] wmap "J1232-0224_S_2014_06_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.563 x 10.35 at 11.98 degrees (North through East) ! Clean map min=-0.0015093 max=0.26404 Jy/beam ! Writing clean map to FITS file: J1232-0224_S_2014_06_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.264044 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00020941 device "J1232-0224_S_2014_06_09_pus\_map.eps/VPS" ! Attempting to open device: 'J1232-0224_S_2014_06_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.237926 0.237926 0.475852 0.951703 1.90341 3.80681 7.61363 15.2273 30.4545 60.909 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.264 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.563 x 10.35 at 11.98 degrees (North through East) ! Clean map min=-0.0015093 max=0.26404 Jy/beam quit ! Quitting program ! Log file J1232-0224_S_2014_06_09_pus_uvs.log closed on Wed Nov 16 19:53:41 2016