! Started logfile: J1228+4858_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:26:28 2017 obs J1228+4858_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J1228+4858_S_2014_01_04_pus_uva.fits ! AN table 1: 97 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.499141 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1228+4858 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 6972 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1228+4858_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 243 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 243 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 243 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 243 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.814652Jy sigma=0.015154 ! Fit after self-cal, rms=0.782877Jy sigma=0.014482 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.22 mas, bmaj=4.406 mas, bpa=42.05 degrees ! Estimated noise=841.718 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.16391 Jy ! Component: 100 - total flux cleaned = 0.199653 Jy ! Total flux subtracted in 100 components = 0.199653 Jy ! Clean residual min=-0.009246 max=0.011675 Jy/beam ! Clean residual mean=0.000070 rms=0.002611 Jy/beam ! Combined flux in latest and established models = 0.199653 Jy ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 0.199653 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075615Jy sigma=0.001162 ! Fit after self-cal, rms=0.075599Jy sigma=0.001162 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.94 mas, bmaj=5.167 mas, bpa=42.56 degrees ! Estimated noise=497.41 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0139854 Jy ! Component: 100 - total flux cleaned = 0.0220354 Jy ! Component: 150 - total flux cleaned = 0.0275461 Jy ! Component: 200 - total flux cleaned = 0.0313987 Jy ! Total flux subtracted in 200 components = 0.0313987 Jy ! Clean residual min=-0.008453 max=0.007559 Jy/beam ! Clean residual mean=0.000123 rms=0.002334 Jy/beam ! Combined flux in latest and established models = 0.231052 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.231052 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071546Jy sigma=0.001128 ! Fit after self-cal, rms=0.071511Jy sigma=0.001128 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.87 KP 1.00* LA 0.94 ! MK 0.99 NL 0.98 OV 1.02 PT 0.96 ! SC 0.91 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.04 KP 1.00* LA 0.92 ! MK 1.00 NL 1.07 OV 1.05 PT 0.94 ! SC 0.94 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.19 KP 1.00* LA 0.74 ! MK 1.03 NL 1.03 OV 0.96 PT 0.93 ! SC 0.98 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 1.05 KP 1.00* LA 0.81 ! MK 1.03 NL 1.13 OV 1.02 PT 0.97 ! SC 0.93 ! ! ! Fit before self-cal, rms=0.071511Jy sigma=0.001128 ! Fit after self-cal, rms=0.065144Jy sigma=0.001043 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.921 mas, bmaj=5.178 mas, bpa=42.3 degrees ! Estimated noise=499.305 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000566304 Jy ! Component: 100 - total flux cleaned = -0.000745996 Jy ! Component: 150 - total flux cleaned = -0.000956025 Jy ! Component: 200 - total flux cleaned = -0.00112502 Jy ! Total flux subtracted in 200 components = -0.00112502 Jy ! Clean residual min=-0.005003 max=0.005619 Jy/beam ! Clean residual mean=0.000027 rms=0.001475 Jy/beam ! Combined flux in latest and established models = 0.229927 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 20 components and 0.229927 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064870Jy sigma=0.001040 ! Fit after self-cal, rms=0.064720Jy sigma=0.001040 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064720Jy sigma=0.001040 ! Fit after self-cal, rms=0.063891Jy sigma=0.001026 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.938 mas, bmaj=5.149 mas, bpa=42.91 degrees ! Estimated noise=500.743 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00146576 Jy ! Component: 100 - total flux cleaned = -0.00173065 Jy ! Component: 150 - total flux cleaned = -0.00188217 Jy ! Component: 200 - total flux cleaned = -0.0020031 Jy ! Total flux subtracted in 200 components = -0.0020031 Jy ! Clean residual min=-0.004124 max=0.005058 Jy/beam ! Clean residual mean=0.000027 rms=0.001135 Jy/beam ! Combined flux in latest and established models = 0.227924 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 26 components and 0.227924 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063727Jy sigma=0.001025 ! Fit after self-cal, rms=0.063710Jy sigma=0.001025 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-62, -99). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00467701 Jy ! Component: 100 - total flux cleaned = 0.00742811 Jy ! Component: 150 - total flux cleaned = 0.00955999 Jy ! Component: 200 - total flux cleaned = 0.0113543 Jy ! Total flux subtracted in 200 components = 0.0113543 Jy ! Clean residual min=-0.003107 max=0.003806 Jy/beam ! Clean residual mean=0.000021 rms=0.000885 Jy/beam ! Combined flux in latest and established models = 0.239278 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 58 components and 0.239278 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063216Jy sigma=0.001019 ! Fit after self-cal, rms=0.063197Jy sigma=0.001019 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063197Jy sigma=0.001019 ! Fit after self-cal, rms=0.063089Jy sigma=0.001018 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.944 mas, bmaj=5.15 mas, bpa=43.06 degrees ! Estimated noise=499.751 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0020954 Jy ! Component: 100 - total flux cleaned = 0.00345268 Jy ! Component: 150 - total flux cleaned = 0.0045741 Jy ! Component: 200 - total flux cleaned = 0.00557607 Jy ! Total flux subtracted in 200 components = 0.00557607 Jy ! Clean residual min=-0.002718 max=0.003278 Jy/beam ! Clean residual mean=0.000015 rms=0.000762 Jy/beam ! Combined flux in latest and established models = 0.244854 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 79 components and 0.244854 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062936Jy sigma=0.001016 ! Fit after self-cal, rms=0.062925Jy sigma=0.001016 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (37.5, 26). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00296812 Jy ! Component: 100 - total flux cleaned = 0.00485053 Jy ! Component: 150 - total flux cleaned = 0.00633322 Jy ! Component: 200 - total flux cleaned = 0.00759233 Jy ! Total flux subtracted in 200 components = 0.00759233 Jy ! Clean residual min=-0.002405 max=0.002194 Jy/beam ! Clean residual mean=0.000009 rms=0.000606 Jy/beam ! Combined flux in latest and established models = 0.252447 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 110 components and 0.252447 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062718Jy sigma=0.001013 ! Fit after self-cal, rms=0.062701Jy sigma=0.001013 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062701Jy sigma=0.001013 ! Fit after self-cal, rms=0.062710Jy sigma=0.001013 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.575 mas, bmaj=9.314 mas, bpa=39.29 degrees ! Estimated noise=589.966 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00207309 Jy ! Component: 100 - total flux cleaned = 0.00285557 Jy ! Component: 150 - total flux cleaned = 0.00345247 Jy ! Component: 200 - total flux cleaned = 0.00404999 Jy ! Total flux subtracted in 200 components = 0.00404999 Jy ! Clean residual min=-0.002590 max=0.002262 Jy/beam ! Clean residual mean=0.000017 rms=0.000672 Jy/beam ! Combined flux in latest and established models = 0.256497 Jy selfcal ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 149 components and 0.256497 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062639Jy sigma=0.001012 ! Fit after self-cal, rms=0.062640Jy sigma=0.001012 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000712415 Jy ! Component: 100 - total flux cleaned = 0.00109443 Jy ! Component: 150 - total flux cleaned = 0.00139466 Jy ! Component: 200 - total flux cleaned = 0.00163978 Jy ! Total flux subtracted in 200 components = 0.00163978 Jy ! Clean residual min=-0.002389 max=0.002108 Jy/beam ! Clean residual mean=0.000016 rms=0.000605 Jy/beam ! Combined flux in latest and established models = 0.258136 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 162 components and 0.258136 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062615Jy sigma=0.001012 ! Fit after self-cal, rms=0.062611Jy sigma=0.001011 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.945 mas, bmaj=5.15 mas, bpa=43.12 degrees ! Estimated noise=499.404 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.945 x 5.15 at 43.12 degrees (North through East) ! Clean map min=-0.0021505 max=0.21128 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.192 mas, bmaj=4.373 mas, bpa=42.4 degrees ! Estimated noise=858.408 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.167173 Jy ! Component: 100 - total flux cleaned = 0.203628 Jy ! Component: 150 - total flux cleaned = 0.212651 Jy ! Component: 200 - total flux cleaned = 0.218068 Jy ! Total flux subtracted in 200 components = 0.218068 Jy ! Clean residual min=-0.004660 max=0.004813 Jy/beam ! Clean residual mean=0.000022 rms=0.001146 Jy/beam ! Combined flux in latest and established models = 0.218068 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.218068 Jy ! Inverting map and beam ! Estimated beam: bmin=3.945 mas, bmaj=5.15 mas, bpa=43.12 degrees ! Estimated noise=499.404 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00504091 Jy ! Component: 100 - total flux cleaned = 0.00891369 Jy ! Component: 150 - total flux cleaned = 0.012163 Jy ! Component: 200 - total flux cleaned = 0.0149627 Jy ! Total flux subtracted in 200 components = 0.0149627 Jy ! Clean residual min=-0.002748 max=0.002679 Jy/beam ! Clean residual mean=0.000040 rms=0.000798 Jy/beam ! Combined flux in latest and established models = 0.233031 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 62 components and 0.233031 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.575 mas, bmaj=9.314 mas, bpa=39.29 degrees ! Estimated noise=589.966 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00391748 Jy ! Component: 100 - total flux cleaned = 0.00690362 Jy ! Component: 150 - total flux cleaned = 0.00936127 Jy ! Component: 200 - total flux cleaned = 0.0114258 Jy ! Total flux subtracted in 200 components = 0.0114258 Jy ! Clean residual min=-0.002851 max=0.002443 Jy/beam ! Clean residual mean=0.000059 rms=0.000871 Jy/beam ! Combined flux in latest and established models = 0.244457 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00175932 Jy ! Component: 100 - total flux cleaned = 0.00327019 Jy ! Component: 150 - total flux cleaned = 0.00457634 Jy ! Component: 200 - total flux cleaned = 0.00571684 Jy ! Total flux subtracted in 200 components = 0.00571684 Jy ! Clean residual min=-0.002380 max=0.001938 Jy/beam ! Clean residual mean=0.000046 rms=0.000708 Jy/beam ! Combined flux in latest and established models = 0.250174 Jy ! Adding 96 model components to the UV plane model. ! The established model now contains 154 components and 0.250174 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.945 mas, bmaj=5.15 mas, bpa=43.12 degrees ! Estimated noise=499.404 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00140414 Jy ! Component: 100 - total flux cleaned = 0.00220661 Jy ! Component: 150 - total flux cleaned = 0.00278679 Jy ! Component: 200 - total flux cleaned = 0.00327426 Jy ! Total flux subtracted in 200 components = 0.00327426 Jy ! Clean residual min=-0.002018 max=0.002285 Jy/beam ! Clean residual mean=0.000017 rms=0.000503 Jy/beam ! Combined flux in latest and established models = 0.253448 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 174 components and 0.253448 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062631Jy sigma=0.001012 ! Fit after self-cal, rms=0.062633Jy sigma=0.001012 wmodel J1228+4858_S_2014_01_04_pus_map.mod ! Writing 174 model components to file: J1228+4858_S_2014_01_04_pus_map.mod wobs J1228+4858_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J1228+4858_S_2014_01_04_pus_uvs.fits wwins J1228+4858_S_2014_01_04_pus_map.win ! wwins: Wrote 3 windows to J1228+4858_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000346039 Jy ! Component: 100 - total flux cleaned = 0.000412731 Jy ! Component: 150 - total flux cleaned = 0.00029152 Jy ! Component: 200 - total flux cleaned = 0.00020588 Jy ! Component: 250 - total flux cleaned = 0.000125 Jy ! Component: 300 - total flux cleaned = 0.000149577 Jy ! Component: 350 - total flux cleaned = 0.000245745 Jy ! Component: 400 - total flux cleaned = 0.000269005 Jy ! Component: 450 - total flux cleaned = 0.000404712 Jy ! Component: 500 - total flux cleaned = 0.000469511 Jy ! Component: 550 - total flux cleaned = 0.000617852 Jy ! Component: 600 - total flux cleaned = 0.000700213 Jy ! Component: 650 - total flux cleaned = 0.000821103 Jy ! Component: 700 - total flux cleaned = 0.000958156 Jy ! Component: 750 - total flux cleaned = 0.00109123 Jy ! Component: 800 - total flux cleaned = 0.00120213 Jy ! Component: 850 - total flux cleaned = 0.00127403 Jy ! Component: 900 - total flux cleaned = 0.00134456 Jy ! Component: 950 - total flux cleaned = 0.00146537 Jy ! Component: 1000 - total flux cleaned = 0.00158384 Jy ! Component: 1050 - total flux cleaned = 0.00173333 Jy ! Component: 1100 - total flux cleaned = 0.00186418 Jy ! Component: 1150 - total flux cleaned = 0.00200865 Jy ! Component: 1200 - total flux cleaned = 0.00216658 Jy ! Component: 1250 - total flux cleaned = 0.00224429 Jy ! Component: 1300 - total flux cleaned = 0.00232099 Jy ! Component: 1350 - total flux cleaned = 0.00241154 Jy ! Component: 1400 - total flux cleaned = 0.00250084 Jy ! Component: 1450 - total flux cleaned = 0.00255952 Jy ! Component: 1500 - total flux cleaned = 0.00266104 Jy ! Component: 1550 - total flux cleaned = 0.00271825 Jy ! Component: 1600 - total flux cleaned = 0.00277478 Jy ! Component: 1650 - total flux cleaned = 0.00284447 Jy ! Component: 1700 - total flux cleaned = 0.00287192 Jy ! Component: 1750 - total flux cleaned = 0.00295363 Jy ! Component: 1800 - total flux cleaned = 0.00299381 Jy ! Component: 1850 - total flux cleaned = 0.00299381 Jy ! Component: 1900 - total flux cleaned = 0.00307255 Jy ! Component: 1950 - total flux cleaned = 0.00311135 Jy ! Component: 2000 - total flux cleaned = 0.00312392 Jy ! Component: 2050 - total flux cleaned = 0.00311112 Jy ! Component: 2100 - total flux cleaned = 0.00309849 Jy ! Component: 2150 - total flux cleaned = 0.00308602 Jy ! Component: 2200 - total flux cleaned = 0.00309828 Jy ! Component: 2250 - total flux cleaned = 0.00309818 Jy ! Component: 2300 - total flux cleaned = 0.00311024 Jy ! Component: 2350 - total flux cleaned = 0.00311016 Jy ! Component: 2400 - total flux cleaned = 0.00312208 Jy ! Component: 2450 - total flux cleaned = 0.0031103 Jy ! Component: 2500 - total flux cleaned = 0.00315705 Jy ! Component: 2550 - total flux cleaned = 0.00314554 Jy ! Component: 2600 - total flux cleaned = 0.00316847 Jy ! Component: 2650 - total flux cleaned = 0.00317979 Jy ! Component: 2700 - total flux cleaned = 0.00315714 Jy ! Component: 2750 - total flux cleaned = 0.00316853 Jy ! Component: 2800 - total flux cleaned = 0.00317969 Jy ! Component: 2850 - total flux cleaned = 0.00319086 Jy ! Component: 2900 - total flux cleaned = 0.00320191 Jy ! Component: 2950 - total flux cleaned = 0.0032346 Jy ! Component: 3000 - total flux cleaned = 0.00325616 Jy ! Component: 3050 - total flux cleaned = 0.00324544 Jy ! Component: 3100 - total flux cleaned = 0.00326691 Jy ! Component: 3150 - total flux cleaned = 0.00328818 Jy ! Component: 3200 - total flux cleaned = 0.00330932 Jy ! Component: 3250 - total flux cleaned = 0.003341 Jy ! Component: 3300 - total flux cleaned = 0.00335152 Jy ! Component: 3350 - total flux cleaned = 0.00340374 Jy ! Component: 3400 - total flux cleaned = 0.00340374 Jy ! Component: 3450 - total flux cleaned = 0.00343476 Jy ! Component: 3500 - total flux cleaned = 0.00346565 Jy ! Component: 3550 - total flux cleaned = 0.00349639 Jy ! Component: 3600 - total flux cleaned = 0.00350666 Jy ! Component: 3650 - total flux cleaned = 0.00353709 Jy ! Component: 3700 - total flux cleaned = 0.00358753 Jy ! Component: 3750 - total flux cleaned = 0.00359759 Jy ! Component: 3800 - total flux cleaned = 0.00364768 Jy ! Component: 3850 - total flux cleaned = 0.00367768 Jy ! Component: 3900 - total flux cleaned = 0.00367766 Jy ! Component: 3950 - total flux cleaned = 0.00371725 Jy ! Component: 4000 - total flux cleaned = 0.00373702 Jy ! Component: 4050 - total flux cleaned = 0.00378602 Jy ! Total flux subtracted in 4096 components = 0.00382507 Jy ! Clean residual min=-0.000521 max=0.000605 Jy/beam ! Clean residual mean=0.000004 rms=0.000168 Jy/beam ! Combined flux in latest and established models = 0.257273 Jy keep ! Adding 259 model components to the UV plane model. ! The established model now contains 433 components and 0.257273 Jy ![Exited script file: muppet] wmap "J1228+4858_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.945 x 5.15 at 43.12 degrees (North through East) ! Clean map min=-0.001145 max=0.2139 Jy/beam ! Writing clean map to FITS file: J1228+4858_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.213897 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000170049 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.238502 0.238502 0.477003 0.954006 1.90801 3.81603 7.63205 15.2641 30.5282 61.0564 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.213 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.945 x 5.15 at 43.12 degrees (North through East) ! Clean map min=-0.001145 max=0.2139 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1228+4858_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:26:33 2017