! Started logfile: J1213-1003_S_2014_06_09_pus_uvs.log on Wed Nov 16 19:52:51 2016 obs J1213-1003_S_2014_06_09_pus_uva.fits ! Reading UV FITS file: J1213-1003_S_2014_06_09_pus_uva.fits ! AN table 1: 82 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.779675 visibilities/baseline/integration-bin. ! Found source: J1213-1003 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 336 lines of history. ! ! Reading 11508 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1213-1003_S_2014_06_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 93 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 93 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 93 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 93 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.926146Jy sigma=0.009769 ! Fit after self-cal, rms=0.903011Jy sigma=0.009554 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.586 mas, bmaj=7.104 mas, bpa=-6.45 degrees ! Estimated noise=903.907 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0713777 Jy ! Component: 100 - total flux cleaned = 0.096111 Jy ! Total flux subtracted in 100 components = 0.096111 Jy ! Clean residual min=-0.009690 max=0.027179 Jy/beam ! Clean residual mean=-0.000073 rms=0.002592 Jy/beam ! Combined flux in latest and established models = 0.096111 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.096111 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092657Jy sigma=0.000940 ! Fit after self-cal, rms=0.092545Jy sigma=0.000939 ! Inverting map ! Added new window around map position (6, -3). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0232023 Jy ! Component: 100 - total flux cleaned = 0.0352119 Jy ! Total flux subtracted in 100 components = 0.0352119 Jy ! Clean residual min=-0.005881 max=0.011660 Jy/beam ! Clean residual mean=-0.000046 rms=0.001708 Jy/beam ! Combined flux in latest and established models = 0.131323 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 28 components and 0.131323 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085040Jy sigma=0.000851 ! Fit after self-cal, rms=0.083835Jy sigma=0.000838 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0139736 Jy ! Component: 100 - total flux cleaned = 0.0216651 Jy ! Total flux subtracted in 100 components = 0.0216651 Jy ! Clean residual min=-0.004750 max=0.005778 Jy/beam ! Clean residual mean=-0.000027 rms=0.001237 Jy/beam ! Combined flux in latest and established models = 0.152988 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 38 components and 0.152988 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080772Jy sigma=0.000804 ! Fit after self-cal, rms=0.080382Jy sigma=0.000799 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00806051 Jy ! Component: 100 - total flux cleaned = 0.0127657 Jy ! Total flux subtracted in 100 components = 0.0127657 Jy ! Clean residual min=-0.004060 max=0.004542 Jy/beam ! Clean residual mean=-0.000015 rms=0.001044 Jy/beam ! Combined flux in latest and established models = 0.165754 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 47 components and 0.165754 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079309Jy sigma=0.000788 ! Fit after self-cal, rms=0.079211Jy sigma=0.000787 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.17 mas, bmaj=8.33 mas, bpa=-5.625 degrees ! Estimated noise=629.796 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00526612 Jy ! Component: 100 - total flux cleaned = 0.00729689 Jy ! Component: 150 - total flux cleaned = 0.00797901 Jy ! Component: 200 - total flux cleaned = 0.00834519 Jy ! Total flux subtracted in 200 components = 0.00834519 Jy ! Clean residual min=-0.002959 max=0.004046 Jy/beam ! Clean residual mean=-0.000008 rms=0.000839 Jy/beam ! Combined flux in latest and established models = 0.174099 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 59 components and 0.174099 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078774Jy sigma=0.000783 ! Fit after self-cal, rms=0.078730Jy sigma=0.000783 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.86 HN 0.97 KP 0.99 ! LA 1.15 MK 0.98 NL 1.00 OV 0.99 ! PT 0.98 SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 1.14 KP 1.01 ! LA 1.13 MK 1.02 NL 1.18 OV 1.00 ! PT 0.99 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.17 HN 1.06 KP 0.90 ! LA 0.88 MK 1.05 NL 0.96 OV 0.96 ! PT 0.95 SC 1.09 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.05 HN 0.99 KP 0.88 ! LA 0.88 MK 1.03 NL 1.02 OV 1.04 ! PT 1.04 SC 0.98 ! ! ! Fit before self-cal, rms=0.078730Jy sigma=0.000783 ! Fit after self-cal, rms=0.078526Jy sigma=0.000769 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.194 mas, bmaj=8.396 mas, bpa=-5.58 degrees ! Estimated noise=638.394 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000806227 Jy ! Component: 100 - total flux cleaned = 0.00054979 Jy ! Component: 150 - total flux cleaned = 0.000443424 Jy ! Component: 200 - total flux cleaned = 0.00044198 Jy ! Total flux subtracted in 200 components = 0.00044198 Jy ! Clean residual min=-0.002404 max=0.002818 Jy/beam ! Clean residual mean=-0.000002 rms=0.000633 Jy/beam ! Combined flux in latest and established models = 0.174541 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 68 components and 0.174541 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078419Jy sigma=0.000768 ! Fit after self-cal, rms=0.078433Jy sigma=0.000768 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078433Jy sigma=0.000768 ! Fit after self-cal, rms=0.077493Jy sigma=0.000765 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.2 mas, bmaj=8.373 mas, bpa=-6.288 degrees ! Estimated noise=633.928 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000641546 Jy ! Component: 100 - total flux cleaned = 0.000464872 Jy ! Component: 150 - total flux cleaned = 0.00031404 Jy ! Component: 200 - total flux cleaned = 0.000245192 Jy ! Total flux subtracted in 200 components = 0.000245192 Jy ! Clean residual min=-0.001999 max=0.002214 Jy/beam ! Clean residual mean=-0.000001 rms=0.000511 Jy/beam ! Combined flux in latest and established models = 0.174786 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 81 components and 0.174786 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077434Jy sigma=0.000765 ! Fit after self-cal, rms=0.077437Jy sigma=0.000765 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000226461 Jy ! Component: 100 - total flux cleaned = 0.000127471 Jy ! Component: 150 - total flux cleaned = 6.52352e-05 Jy ! Component: 200 - total flux cleaned = 3.6709e-05 Jy ! Total flux subtracted in 200 components = 3.6709e-05 Jy ! Clean residual min=-0.001942 max=0.002054 Jy/beam ! Clean residual mean=-0.000001 rms=0.000497 Jy/beam ! Combined flux in latest and established models = 0.174823 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 82 components and 0.174823 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077407Jy sigma=0.000764 ! Fit after self-cal, rms=0.077407Jy sigma=0.000764 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077407Jy sigma=0.000764 ! Fit after self-cal, rms=0.077070Jy sigma=0.000764 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.202 mas, bmaj=8.377 mas, bpa=-6.474 degrees ! Estimated noise=631.728 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000206905 Jy ! Component: 100 - total flux cleaned = 4.74516e-05 Jy ! Component: 150 - total flux cleaned = -3.95035e-05 Jy ! Component: 200 - total flux cleaned = -9.37791e-05 Jy ! Total flux subtracted in 200 components = -9.37791e-05 Jy ! Clean residual min=-0.001867 max=0.001939 Jy/beam ! Clean residual mean=-0.000001 rms=0.000480 Jy/beam ! Combined flux in latest and established models = 0.174729 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 83 components and 0.174729 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077043Jy sigma=0.000764 ! Fit after self-cal, rms=0.077043Jy sigma=0.000764 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.13568e-05 Jy ! Component: 100 - total flux cleaned = 2.78743e-05 Jy ! Component: 150 - total flux cleaned = 3.38718e-06 Jy ! Component: 200 - total flux cleaned = -2.07344e-05 Jy ! Total flux subtracted in 200 components = -2.07344e-05 Jy ! Clean residual min=-0.001820 max=0.001842 Jy/beam ! Clean residual mean=-0.000001 rms=0.000473 Jy/beam ! Combined flux in latest and established models = 0.174708 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 86 components and 0.174708 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077026Jy sigma=0.000764 ! Fit after self-cal, rms=0.077027Jy sigma=0.000764 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077027Jy sigma=0.000764 ! Fit after self-cal, rms=0.076893Jy sigma=0.000764 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.329 mas, bmaj=16.08 mas, bpa=-8.674 degrees ! Estimated noise=780.616 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.26433e-05 Jy ! Component: 100 - total flux cleaned = -0.000101076 Jy ! Component: 150 - total flux cleaned = -0.000138794 Jy ! Component: 200 - total flux cleaned = -0.000190864 Jy ! Total flux subtracted in 200 components = -0.000190864 Jy ! Clean residual min=-0.001752 max=0.002115 Jy/beam ! Clean residual mean=-0.000003 rms=0.000554 Jy/beam ! Combined flux in latest and established models = 0.174517 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 90 components and 0.174517 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076884Jy sigma=0.000764 ! Fit after self-cal, rms=0.076884Jy sigma=0.000764 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.45086e-05 Jy ! Component: 100 - total flux cleaned = -8.43746e-05 Jy ! Component: 150 - total flux cleaned = -0.000131364 Jy ! Component: 200 - total flux cleaned = -0.00017571 Jy ! Total flux subtracted in 200 components = -0.00017571 Jy ! Clean residual min=-0.001743 max=0.002074 Jy/beam ! Clean residual mean=-0.000003 rms=0.000553 Jy/beam ! Combined flux in latest and established models = 0.174342 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 91 components and 0.174342 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076880Jy sigma=0.000764 ! Fit after self-cal, rms=0.076879Jy sigma=0.000764 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.203 mas, bmaj=8.38 mas, bpa=-6.584 degrees ! Estimated noise=630.689 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.203 x 8.38 at -6.584 degrees (North through East) ! Clean map min=-0.0017481 max=0.086088 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.608 mas, bmaj=7.152 mas, bpa=-7.39 degrees ! Estimated noise=896.707 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0745841 Jy ! Component: 100 - total flux cleaned = 0.108502 Jy ! Component: 150 - total flux cleaned = 0.127677 Jy ! Component: 200 - total flux cleaned = 0.140308 Jy ! Total flux subtracted in 200 components = 0.140308 Jy ! Clean residual min=-0.004014 max=0.007002 Jy/beam ! Clean residual mean=-0.000033 rms=0.001227 Jy/beam ! Combined flux in latest and established models = 0.140308 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 32 model components to the UV plane model. ! The established model now contains 32 components and 0.140308 Jy ! Inverting map and beam ! Estimated beam: bmin=3.203 mas, bmaj=8.38 mas, bpa=-6.584 degrees ! Estimated noise=630.689 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0137503 Jy ! Component: 100 - total flux cleaned = 0.021727 Jy ! Component: 150 - total flux cleaned = 0.0266056 Jy ! Component: 200 - total flux cleaned = 0.0296427 Jy ! Total flux subtracted in 200 components = 0.0296427 Jy ! Clean residual min=-0.002023 max=0.001977 Jy/beam ! Clean residual mean=-0.000009 rms=0.000522 Jy/beam ! Combined flux in latest and established models = 0.16995 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 56 components and 0.16995 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.329 mas, bmaj=16.08 mas, bpa=-8.674 degrees ! Estimated noise=780.616 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00266613 Jy ! Component: 100 - total flux cleaned = 0.00381719 Jy ! Component: 150 - total flux cleaned = 0.00435385 Jy ! Component: 200 - total flux cleaned = 0.00438282 Jy ! Total flux subtracted in 200 components = 0.00438282 Jy ! Clean residual min=-0.001740 max=0.002055 Jy/beam ! Clean residual mean=-0.000003 rms=0.000554 Jy/beam ! Combined flux in latest and established models = 0.174333 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.90803e-07 Jy ! Component: 100 - total flux cleaned = 4.81901e-07 Jy ! Component: 150 - total flux cleaned = -1.12162e-05 Jy ! Component: 200 - total flux cleaned = -1.17166e-05 Jy ! Total flux subtracted in 200 components = -1.17166e-05 Jy ! Clean residual min=-0.001733 max=0.002021 Jy/beam ! Clean residual mean=-0.000003 rms=0.000551 Jy/beam ! Combined flux in latest and established models = 0.174321 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 90 components and 0.174321 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.203 mas, bmaj=8.38 mas, bpa=-6.584 degrees ! Estimated noise=630.689 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.39786e-05 Jy ! Component: 100 - total flux cleaned = 3.57029e-05 Jy ! Component: 150 - total flux cleaned = 5.80096e-05 Jy ! Component: 200 - total flux cleaned = 0.00010038 Jy ! Total flux subtracted in 200 components = 0.00010038 Jy ! Clean residual min=-0.001815 max=0.001758 Jy/beam ! Clean residual mean=-0.000002 rms=0.000458 Jy/beam ! Combined flux in latest and established models = 0.174422 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 98 components and 0.174422 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076861Jy sigma=0.000764 ! Fit after self-cal, rms=0.076855Jy sigma=0.000763 wmodel J1213-1003_S_2014_06_09_pus_map.mod ! Writing 98 model components to file: J1213-1003_S_2014_06_09_pus_map.mod wobs J1213-1003_S_2014_06_09_pus_uvs.fits ! Writing UV FITS file: J1213-1003_S_2014_06_09_pus_uvs.fits wwins J1213-1003_S_2014_06_09_pus_map.win ! wwins: Wrote 2 windows to J1213-1003_S_2014_06_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -4.48401e-06 Jy ! Component: 100 - total flux cleaned = -3.41444e-05 Jy ! Component: 150 - total flux cleaned = -0.000299134 Jy ! Component: 200 - total flux cleaned = -0.000552778 Jy ! Component: 250 - total flux cleaned = -0.000795977 Jy ! Component: 300 - total flux cleaned = -0.000952152 Jy ! Component: 350 - total flux cleaned = -0.00110371 Jy ! Component: 400 - total flux cleaned = -0.00125109 Jy ! Component: 450 - total flux cleaned = -0.00144324 Jy ! Component: 500 - total flux cleaned = -0.00165473 Jy ! Component: 550 - total flux cleaned = -0.00174679 Jy ! Component: 600 - total flux cleaned = -0.00190416 Jy ! Component: 650 - total flux cleaned = -0.00197032 Jy ! Component: 700 - total flux cleaned = -0.00201377 Jy ! Component: 750 - total flux cleaned = -0.00220439 Jy ! Component: 800 - total flux cleaned = -0.0022253 Jy ! Component: 850 - total flux cleaned = -0.00226633 Jy ! Component: 900 - total flux cleaned = -0.00236753 Jy ! Component: 950 - total flux cleaned = -0.00246659 Jy ! Component: 1000 - total flux cleaned = -0.00256366 Jy ! Component: 1050 - total flux cleaned = -0.00264021 Jy ! Component: 1100 - total flux cleaned = -0.00267801 Jy ! Component: 1150 - total flux cleaned = -0.00278971 Jy ! Component: 1200 - total flux cleaned = -0.00275297 Jy ! Component: 1250 - total flux cleaned = -0.00284361 Jy ! Component: 1300 - total flux cleaned = -0.00286122 Jy ! Component: 1350 - total flux cleaned = -0.00287872 Jy ! Component: 1400 - total flux cleaned = -0.00293106 Jy ! Component: 1450 - total flux cleaned = -0.00294868 Jy ! Component: 1500 - total flux cleaned = -0.0030502 Jy ! Component: 1550 - total flux cleaned = -0.00299988 Jy ! Component: 1600 - total flux cleaned = -0.00299995 Jy ! Component: 1650 - total flux cleaned = -0.00301649 Jy ! Component: 1700 - total flux cleaned = -0.0030003 Jy ! Component: 1750 - total flux cleaned = -0.00300043 Jy ! Component: 1800 - total flux cleaned = -0.00295312 Jy ! Component: 1850 - total flux cleaned = -0.00301562 Jy ! Component: 1900 - total flux cleaned = -0.00296918 Jy ! Component: 1950 - total flux cleaned = -0.00295399 Jy ! Component: 2000 - total flux cleaned = -0.00301472 Jy ! Component: 2050 - total flux cleaned = -0.00298469 Jy ! Component: 2100 - total flux cleaned = -0.00301448 Jy ! Component: 2150 - total flux cleaned = -0.00301459 Jy ! Component: 2200 - total flux cleaned = -0.00307303 Jy ! Component: 2250 - total flux cleaned = -0.00308754 Jy ! Component: 2300 - total flux cleaned = -0.00303052 Jy ! Component: 2350 - total flux cleaned = -0.0031155 Jy ! Component: 2400 - total flux cleaned = -0.00308708 Jy ! Component: 2450 - total flux cleaned = -0.0030453 Jy ! Component: 2500 - total flux cleaned = -0.00307283 Jy ! Component: 2550 - total flux cleaned = -0.0030319 Jy ! Component: 2600 - total flux cleaned = -0.00304555 Jy ! Component: 2650 - total flux cleaned = -0.00300517 Jy ! Component: 2700 - total flux cleaned = -0.0029785 Jy ! Component: 2750 - total flux cleaned = -0.00296533 Jy ! Component: 2800 - total flux cleaned = -0.00292595 Jy ! Component: 2850 - total flux cleaned = -0.00289998 Jy ! Component: 2900 - total flux cleaned = -0.00286121 Jy ! Component: 2950 - total flux cleaned = -0.00280998 Jy ! Component: 3000 - total flux cleaned = -0.00283532 Jy ! Component: 3050 - total flux cleaned = -0.00278478 Jy ! Component: 3100 - total flux cleaned = -0.00277242 Jy ! Component: 3150 - total flux cleaned = -0.00273503 Jy ! Component: 3200 - total flux cleaned = -0.00268589 Jy ! Component: 3250 - total flux cleaned = -0.00268584 Jy ! Component: 3300 - total flux cleaned = -0.00264941 Jy ! Component: 3350 - total flux cleaned = -0.00261332 Jy ! Component: 3400 - total flux cleaned = -0.00258942 Jy ! Component: 3450 - total flux cleaned = -0.00256562 Jy ! Component: 3500 - total flux cleaned = -0.00256571 Jy ! Component: 3550 - total flux cleaned = -0.00250731 Jy ! Component: 3600 - total flux cleaned = -0.00248406 Jy ! Component: 3650 - total flux cleaned = -0.00248396 Jy ! Component: 3700 - total flux cleaned = -0.00241536 Jy ! Component: 3750 - total flux cleaned = -0.0024494 Jy ! Component: 3800 - total flux cleaned = -0.00238164 Jy ! Component: 3850 - total flux cleaned = -0.00235923 Jy ! Component: 3900 - total flux cleaned = -0.00231469 Jy ! Component: 3950 - total flux cleaned = -0.00229256 Jy ! Component: 4000 - total flux cleaned = -0.00228142 Jy ! Component: 4050 - total flux cleaned = -0.00224854 Jy ! Total flux subtracted in 4096 components = -0.00217273 Jy ! Clean residual min=-0.000566 max=0.000634 Jy/beam ! Clean residual mean=0.000000 rms=0.000201 Jy/beam ! Combined flux in latest and established models = 0.172249 Jy keep ! Adding 273 model components to the UV plane model. ! The established model now contains 371 components and 0.172249 Jy ![Exited script file: muppet] wmap "J1213-1003_S_2014_06_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.203 x 8.38 at -6.584 degrees (North through East) ! Clean map min=-0.001205 max=0.085557 Jy/beam ! Writing clean map to FITS file: J1213-1003_S_2014_06_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0855573 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000200138 device "J1213-1003_S_2014_06_09_pus\_map.eps/VPS" ! Attempting to open device: 'J1213-1003_S_2014_06_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.701767 0.701767 1.40353 2.80707 5.61414 11.2283 22.4565 44.9131 89.8262 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.085 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.203 x 8.38 at -6.584 degrees (North through East) ! Clean map min=-0.001205 max=0.085557 Jy/beam quit ! Quitting program ! Log file J1213-1003_S_2014_06_09_pus_uvs.log closed on Wed Nov 16 19:52:56 2016