! Started logfile: J1213+1307_S_2015_01_23_pus_uvs.log on Mon Jan 2 19:24:52 2017 obs J1213+1307_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J1213+1307_S_2015_01_23_pus_uva.fits ! AN table 1: 121 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.991736 visibilities/baseline/integration-bin. ! Found source: J1213+1307 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 21600 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1213+1307_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 65 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 65 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 5 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 5 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.961946Jy sigma=0.010797 ! Fit after self-cal, rms=0.900715Jy sigma=0.010219 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.648 mas, bmaj=6.389 mas, bpa=-4.154 degrees ! Estimated noise=703.088 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0808905 Jy ! Component: 100 - total flux cleaned = 0.10076 Jy ! Total flux subtracted in 100 components = 0.10076 Jy ! Clean residual min=-0.006480 max=0.008175 Jy/beam ! Clean residual mean=0.000021 rms=0.001617 Jy/beam ! Combined flux in latest and established models = 0.10076 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.10076 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.180198Jy sigma=0.000967 ! Fit after self-cal, rms=0.180180Jy sigma=0.000967 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.109 mas, bmaj=7.113 mas, bpa=-3.361 degrees ! Estimated noise=465.413 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0140361 Jy ! Component: 100 - total flux cleaned = 0.0220283 Jy ! Component: 150 - total flux cleaned = 0.0273863 Jy ! Component: 200 - total flux cleaned = 0.0311118 Jy ! Total flux subtracted in 200 components = 0.0311118 Jy ! Clean residual min=-0.007718 max=0.009071 Jy/beam ! Clean residual mean=0.000039 rms=0.002383 Jy/beam ! Combined flux in latest and established models = 0.131872 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 51 components and 0.131872 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.178313Jy sigma=0.000945 ! Fit after self-cal, rms=0.178221Jy sigma=0.000944 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.72 HN 0.99 KP 1.06 ! LA 0.81 MK 1.07 NL 1.24 OV 1.12 ! PT 0.86 SC 1.05 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.86 HN 1.05 KP 1.04 ! LA 0.85 MK 1.03 NL 1.34 OV 1.07 ! PT 0.84 SC 1.10 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.82 HN 1.04 KP 0.87 ! LA 0.85 MK 0.99 NL 1.34 OV 0.95 ! PT 0.94 SC 1.06 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 0.64 HN 1.02 KP 0.75 ! LA 0.84 MK 0.98 NL 1.09 OV 1.05 ! PT 1.05 SC 1.01 ! ! ! Fit before self-cal, rms=0.178221Jy sigma=0.000944 ! Fit after self-cal, rms=0.135798Jy sigma=0.000919 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.162 mas, bmaj=7.281 mas, bpa=-3.508 degrees ! Estimated noise=464.093 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000195194 Jy ! Component: 100 - total flux cleaned = -0.000323662 Jy ! Component: 150 - total flux cleaned = -0.000289782 Jy ! Component: 200 - total flux cleaned = -0.000261228 Jy ! Total flux subtracted in 200 components = -0.000261228 Jy ! Clean residual min=-0.006025 max=0.008417 Jy/beam ! Clean residual mean=0.000020 rms=0.002052 Jy/beam ! Combined flux in latest and established models = 0.131611 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 58 components and 0.131611 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135769Jy sigma=0.000919 ! Fit after self-cal, rms=0.135780Jy sigma=0.000917 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135780Jy sigma=0.000917 ! Fit after self-cal, rms=0.138652Jy sigma=0.000901 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.181 mas, bmaj=7.322 mas, bpa=-3.518 degrees ! Estimated noise=465.805 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000427558 Jy ! Component: 100 - total flux cleaned = -0.000500951 Jy ! Component: 150 - total flux cleaned = -0.000595003 Jy ! Component: 200 - total flux cleaned = -0.00067506 Jy ! Total flux subtracted in 200 components = -0.00067506 Jy ! Clean residual min=-0.005410 max=0.008785 Jy/beam ! Clean residual mean=0.000015 rms=0.001863 Jy/beam ! Combined flux in latest and established models = 0.130936 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 65 components and 0.130936 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.138625Jy sigma=0.000901 ! Fit after self-cal, rms=0.138813Jy sigma=0.000900 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2, -31). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00723112 Jy ! Component: 100 - total flux cleaned = 0.0106043 Jy ! Component: 150 - total flux cleaned = 0.0127922 Jy ! Component: 200 - total flux cleaned = 0.0144258 Jy ! Total flux subtracted in 200 components = 0.0144258 Jy ! Clean residual min=-0.006171 max=0.007853 Jy/beam ! Clean residual mean=0.000010 rms=0.001675 Jy/beam ! Combined flux in latest and established models = 0.145361 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 88 components and 0.145361 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.138532Jy sigma=0.000891 ! Fit after self-cal, rms=0.138437Jy sigma=0.000890 ! Inverting map ! Added new window around map position (114.5, 9). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00712954 Jy ! Component: 100 - total flux cleaned = 0.0110074 Jy ! Component: 150 - total flux cleaned = 0.0136011 Jy ! Component: 200 - total flux cleaned = 0.0152691 Jy ! Total flux subtracted in 200 components = 0.0152691 Jy ! Clean residual min=-0.005450 max=0.006188 Jy/beam ! Clean residual mean=0.000014 rms=0.001461 Jy/beam ! Combined flux in latest and established models = 0.160631 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 136 components and 0.160631 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.138160Jy sigma=0.000882 ! Fit after self-cal, rms=0.138158Jy sigma=0.000881 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.138158Jy sigma=0.000881 ! Fit after self-cal, rms=0.140626Jy sigma=0.000879 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.214 mas, bmaj=7.411 mas, bpa=-3.606 degrees ! Estimated noise=462.168 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00286138 Jy ! Component: 100 - total flux cleaned = 0.00443448 Jy ! Component: 150 - total flux cleaned = 0.00521722 Jy ! Component: 200 - total flux cleaned = 0.00573103 Jy ! Total flux subtracted in 200 components = 0.00573103 Jy ! Clean residual min=-0.005151 max=0.005659 Jy/beam ! Clean residual mean=0.000005 rms=0.001367 Jy/beam ! Combined flux in latest and established models = 0.166362 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 152 components and 0.166362 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140568Jy sigma=0.000877 ! Fit after self-cal, rms=0.140677Jy sigma=0.000877 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000831701 Jy ! Component: 100 - total flux cleaned = 0.00113016 Jy ! Component: 150 - total flux cleaned = 0.00126534 Jy ! Component: 200 - total flux cleaned = 0.00147263 Jy ! Total flux subtracted in 200 components = 0.00147263 Jy ! Clean residual min=-0.005176 max=0.005502 Jy/beam ! Clean residual mean=0.000004 rms=0.001355 Jy/beam ! Combined flux in latest and established models = 0.167834 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 163 components and 0.167834 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140648Jy sigma=0.000876 ! Fit after self-cal, rms=0.140652Jy sigma=0.000876 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140652Jy sigma=0.000876 ! Fit after self-cal, rms=0.141260Jy sigma=0.000876 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.255 mas, bmaj=11.17 mas, bpa=-4.897 degrees ! Estimated noise=577.497 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000939004 Jy ! Component: 100 - total flux cleaned = 0.00151178 Jy ! Component: 150 - total flux cleaned = 0.00188034 Jy ! Component: 200 - total flux cleaned = 0.00205689 Jy ! Total flux subtracted in 200 components = 0.00205689 Jy ! Clean residual min=-0.007684 max=0.008793 Jy/beam ! Clean residual mean=0.000007 rms=0.002286 Jy/beam ! Combined flux in latest and established models = 0.169891 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 173 components and 0.169891 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141251Jy sigma=0.000876 ! Fit after self-cal, rms=0.141284Jy sigma=0.000876 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000426357 Jy ! Component: 100 - total flux cleaned = 0.000546324 Jy ! Component: 150 - total flux cleaned = 0.000654222 Jy ! Component: 200 - total flux cleaned = 0.000687472 Jy ! Total flux subtracted in 200 components = 0.000687472 Jy ! Clean residual min=-0.007728 max=0.008633 Jy/beam ! Clean residual mean=0.000005 rms=0.002276 Jy/beam ! Combined flux in latest and established models = 0.170579 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 183 components and 0.170579 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141283Jy sigma=0.000876 ! Fit after self-cal, rms=0.141291Jy sigma=0.000876 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.221 mas, bmaj=7.431 mas, bpa=-3.636 degrees ! Estimated noise=461.312 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.221 x 7.431 at -3.636 degrees (North through East) ! Clean map min=-0.0050611 max=0.10682 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.714 mas, bmaj=6.616 mas, bpa=-4.668 degrees ! Estimated noise=709.847 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0810876 Jy ! Component: 100 - total flux cleaned = 0.100995 Jy ! Component: 150 - total flux cleaned = 0.110945 Jy ! Component: 200 - total flux cleaned = 0.117771 Jy ! Total flux subtracted in 200 components = 0.117771 Jy ! Clean residual min=-0.005461 max=0.005765 Jy/beam ! Clean residual mean=0.000008 rms=0.001433 Jy/beam ! Combined flux in latest and established models = 0.117771 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.117771 Jy ! Inverting map and beam ! Estimated beam: bmin=3.221 mas, bmaj=7.431 mas, bpa=-3.636 degrees ! Estimated noise=461.312 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00798609 Jy ! Component: 100 - total flux cleaned = 0.0140333 Jy ! Component: 150 - total flux cleaned = 0.0190553 Jy ! Component: 200 - total flux cleaned = 0.0233193 Jy ! Total flux subtracted in 200 components = 0.0233193 Jy ! Clean residual min=-0.005613 max=0.005990 Jy/beam ! Clean residual mean=0.000017 rms=0.001575 Jy/beam ! Combined flux in latest and established models = 0.14109 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 69 components and 0.14109 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.255 mas, bmaj=11.17 mas, bpa=-4.897 degrees ! Estimated noise=577.497 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0066466 Jy ! Component: 100 - total flux cleaned = 0.0113627 Jy ! Component: 150 - total flux cleaned = 0.0142251 Jy ! Component: 200 - total flux cleaned = 0.0166114 Jy ! Total flux subtracted in 200 components = 0.0166114 Jy ! Clean residual min=-0.007867 max=0.008727 Jy/beam ! Clean residual mean=0.000023 rms=0.002456 Jy/beam ! Combined flux in latest and established models = 0.157702 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00200365 Jy ! Component: 100 - total flux cleaned = 0.00361754 Jy ! Component: 150 - total flux cleaned = 0.00500495 Jy ! Component: 200 - total flux cleaned = 0.0061358 Jy ! Total flux subtracted in 200 components = 0.0061358 Jy ! Clean residual min=-0.007772 max=0.008629 Jy/beam ! Clean residual mean=0.000019 rms=0.002336 Jy/beam ! Combined flux in latest and established models = 0.163837 Jy ! Adding 75 model components to the UV plane model. ! The established model now contains 132 components and 0.163837 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.221 mas, bmaj=7.431 mas, bpa=-3.636 degrees ! Estimated noise=461.312 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000411009 Jy ! Component: 100 - total flux cleaned = 0.000895251 Jy ! Component: 150 - total flux cleaned = 0.00132161 Jy ! Component: 200 - total flux cleaned = 0.0015826 Jy ! Total flux subtracted in 200 components = 0.0015826 Jy ! Clean residual min=-0.005258 max=0.005294 Jy/beam ! Clean residual mean=0.000005 rms=0.001349 Jy/beam ! Combined flux in latest and established models = 0.16542 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 155 components and 0.16542 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141330Jy sigma=0.000877 ! Fit after self-cal, rms=0.141294Jy sigma=0.000877 wmodel J1213+1307_S_2015_01_23_pus_map.mod ! Writing 155 model components to file: J1213+1307_S_2015_01_23_pus_map.mod wobs J1213+1307_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J1213+1307_S_2015_01_23_pus_uvs.fits wwins J1213+1307_S_2015_01_23_pus_map.win ! wwins: Wrote 3 windows to J1213+1307_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000707939 Jy ! Component: 100 - total flux cleaned = 0.00157183 Jy ! Component: 150 - total flux cleaned = 0.00247792 Jy ! Component: 200 - total flux cleaned = 0.00358295 Jy ! Component: 250 - total flux cleaned = 0.00426783 Jy ! Component: 300 - total flux cleaned = 0.00514681 Jy ! Component: 350 - total flux cleaned = 0.00585199 Jy ! Component: 400 - total flux cleaned = 0.00633121 Jy ! Component: 450 - total flux cleaned = 0.0067314 Jy ! Component: 500 - total flux cleaned = 0.00718692 Jy ! Component: 550 - total flux cleaned = 0.00743954 Jy ! Component: 600 - total flux cleaned = 0.0077469 Jy ! Component: 650 - total flux cleaned = 0.00816593 Jy ! Component: 700 - total flux cleaned = 0.00845901 Jy ! Component: 750 - total flux cleaned = 0.00874621 Jy ! Component: 800 - total flux cleaned = 0.00897124 Jy ! Component: 850 - total flux cleaned = 0.00919287 Jy ! Component: 900 - total flux cleaned = 0.00951729 Jy ! Component: 950 - total flux cleaned = 0.00978231 Jy ! Component: 1000 - total flux cleaned = 0.00993864 Jy ! Component: 1050 - total flux cleaned = 0.0102952 Jy ! Component: 1100 - total flux cleaned = 0.0104945 Jy ! Component: 1150 - total flux cleaned = 0.0106417 Jy ! Component: 1200 - total flux cleaned = 0.0108343 Jy ! Component: 1250 - total flux cleaned = 0.0110698 Jy ! Component: 1300 - total flux cleaned = 0.0110689 Jy ! Component: 1350 - total flux cleaned = 0.0109783 Jy ! Component: 1400 - total flux cleaned = 0.011113 Jy ! Component: 1450 - total flux cleaned = 0.0110697 Jy ! Component: 1500 - total flux cleaned = 0.0113301 Jy ! Component: 1550 - total flux cleaned = 0.0113717 Jy ! Component: 1600 - total flux cleaned = 0.0114132 Jy ! Component: 1650 - total flux cleaned = 0.0114959 Jy ! Component: 1700 - total flux cleaned = 0.0116582 Jy ! Component: 1750 - total flux cleaned = 0.0117782 Jy ! Component: 1800 - total flux cleaned = 0.0117377 Jy ! Component: 1850 - total flux cleaned = 0.011738 Jy ! Component: 1900 - total flux cleaned = 0.0119688 Jy ! Component: 1950 - total flux cleaned = 0.0120817 Jy ! Component: 2000 - total flux cleaned = 0.0121564 Jy ! Component: 2050 - total flux cleaned = 0.0122671 Jy ! Component: 2100 - total flux cleaned = 0.0123397 Jy ! Component: 2150 - total flux cleaned = 0.0125204 Jy ! Component: 2200 - total flux cleaned = 0.0126273 Jy ! Component: 2250 - total flux cleaned = 0.012733 Jy ! Component: 2300 - total flux cleaned = 0.012907 Jy ! Component: 2350 - total flux cleaned = 0.0129763 Jy ! Component: 2400 - total flux cleaned = 0.0131467 Jy ! Component: 2450 - total flux cleaned = 0.0133146 Jy ! Component: 2500 - total flux cleaned = 0.0134145 Jy ! Component: 2550 - total flux cleaned = 0.0135468 Jy ! Component: 2600 - total flux cleaned = 0.0137098 Jy ! Component: 2650 - total flux cleaned = 0.0138068 Jy ! Component: 2700 - total flux cleaned = 0.0139987 Jy ! Component: 2750 - total flux cleaned = 0.0139673 Jy ! Component: 2800 - total flux cleaned = 0.014093 Jy ! Component: 2850 - total flux cleaned = 0.0142178 Jy ! Component: 2900 - total flux cleaned = 0.0143103 Jy ! Component: 2950 - total flux cleaned = 0.0144325 Jy ! Component: 3000 - total flux cleaned = 0.0145533 Jy ! Component: 3050 - total flux cleaned = 0.0147322 Jy ! Component: 3100 - total flux cleaned = 0.014791 Jy ! Component: 3150 - total flux cleaned = 0.0149086 Jy ! Component: 3200 - total flux cleaned = 0.0150243 Jy ! Component: 3250 - total flux cleaned = 0.0151392 Jy ! Component: 3300 - total flux cleaned = 0.0151959 Jy ! Component: 3350 - total flux cleaned = 0.0152809 Jy ! Component: 3400 - total flux cleaned = 0.0153935 Jy ! Component: 3450 - total flux cleaned = 0.0155046 Jy ! Component: 3500 - total flux cleaned = 0.015615 Jy ! Component: 3550 - total flux cleaned = 0.0156698 Jy ! Component: 3600 - total flux cleaned = 0.0157785 Jy ! Component: 3650 - total flux cleaned = 0.015859 Jy ! Component: 3700 - total flux cleaned = 0.0159391 Jy ! Component: 3750 - total flux cleaned = 0.0160185 Jy ! Component: 3800 - total flux cleaned = 0.0160446 Jy ! Component: 3850 - total flux cleaned = 0.0162273 Jy ! Component: 3900 - total flux cleaned = 0.0162012 Jy ! Component: 3950 - total flux cleaned = 0.0162527 Jy ! Component: 4000 - total flux cleaned = 0.0163294 Jy ! Component: 4050 - total flux cleaned = 0.0163802 Jy ! Total flux subtracted in 4096 components = 0.0163549 Jy ! Clean residual min=-0.001269 max=0.001580 Jy/beam ! Clean residual mean=0.000003 rms=0.000486 Jy/beam ! Combined flux in latest and established models = 0.181775 Jy keep ! Adding 359 model components to the UV plane model. ! The established model now contains 514 components and 0.181775 Jy ![Exited script file: muppet] wmap "J1213+1307_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.221 x 7.431 at -3.636 degrees (North through East) ! Clean map min=-0.0030768 max=0.10753 Jy/beam ! Writing clean map to FITS file: J1213+1307_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.107535 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000495834 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.38328 1.38328 2.76656 5.53311 11.0662 22.1324 44.2649 88.5298 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0014 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.107 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.221 x 7.431 at -3.636 degrees (North through East) ! Clean map min=-0.0030768 max=0.10753 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1213+1307_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 19:24:58 2017