! Started logfile: J1210-1217_X_2014_06_09_pus_uvs.log on Sat Nov 19 00:11:59 2016 obs J1210-1217_X_2014_06_09_pus_uva.fits ! Reading UV FITS file: J1210-1217_X_2014_06_09_pus_uva.fits ! AN table 1: 123 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.780307 visibilities/baseline/integration-bin. ! Found source: J1210-1217 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.44388e+09 3.2e+07 1 3.2e+07 ! 02 2 8.47588e+09 3.2e+07 1 3.2e+07 ! 03 3 8.50788e+09 3.2e+07 1 3.2e+07 ! 04 4 8.53988e+09 3.2e+07 1 3.2e+07 ! 05 5 8.60388e+09 3.2e+07 1 3.2e+07 ! 06 6 8.63588e+09 3.2e+07 1 3.2e+07 ! 07 7 8.69988e+09 3.2e+07 1 3.2e+07 ! 08 8 8.73188e+09 3.2e+07 1 3.2e+07 ! 09 9 8.79588e+09 3.2e+07 1 3.2e+07 ! 10 10 8.82788e+09 3.2e+07 1 3.2e+07 ! 11 11 8.85988e+09 3.2e+07 1 3.2e+07 ! 12 12 8.89188e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 344 lines of history. ! ! Reading 51828 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J1210-1217_X_2014_06_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 143 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 204 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 143 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 143 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 204 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 204 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 204 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 204 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 204 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 204 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 204 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 204 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.995817Jy sigma=0.011655 ! Fit after self-cal, rms=0.959989Jy sigma=0.011240 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6979 mas, bmaj=1.866 mas, bpa=-2.454 degrees ! Estimated noise=554.013 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0298868 Jy ! Component: 100 - total flux cleaned = 0.0374163 Jy ! Total flux subtracted in 100 components = 0.0374163 Jy ! Clean residual min=-0.002998 max=0.005256 Jy/beam ! Clean residual mean=0.000001 rms=0.000935 Jy/beam ! Combined flux in latest and established models = 0.0374163 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.0374163 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.072057Jy sigma=0.000799 ! Fit after self-cal, rms=0.070964Jy sigma=0.000786 ! Inverting map ! Added new window around map position (2, 1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00618939 Jy ! Component: 100 - total flux cleaned = 0.0100874 Jy ! Total flux subtracted in 100 components = 0.0100874 Jy ! Clean residual min=-0.002187 max=0.002939 Jy/beam ! Clean residual mean=-0.000001 rms=0.000690 Jy/beam ! Combined flux in latest and established models = 0.0475037 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 27 components and 0.0475037 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070092Jy sigma=0.000775 ! Fit after self-cal, rms=0.069989Jy sigma=0.000774 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8836 mas, bmaj=2.318 mas, bpa=0.3968 degrees ! Estimated noise=280.774 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00645018 Jy ! Component: 100 - total flux cleaned = 0.0104069 Jy ! Component: 150 - total flux cleaned = 0.0130403 Jy ! Component: 200 - total flux cleaned = 0.0148385 Jy ! Total flux subtracted in 200 components = 0.0148385 Jy ! Clean residual min=-0.001907 max=0.003005 Jy/beam ! Clean residual mean=-0.000009 rms=0.000643 Jy/beam ! Combined flux in latest and established models = 0.0623423 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 55 components and 0.0623423 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069337Jy sigma=0.000766 ! Fit after self-cal, rms=0.069239Jy sigma=0.000764 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.05 HN 1.04 KP 0.92 ! LA 0.98 MK 1.06 NL 1.17 OV 1.03 ! PT 0.94 SC 1.08 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.08 HN 1.03 KP 0.86 ! LA 0.99 MK 1.01 NL 1.21 OV 0.99 ! PT 0.92 SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.06 HN 1.00 KP 0.87 ! LA 1.01 MK 1.11 NL 1.15 OV 1.00 ! PT 0.89 SC 1.07 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.98 HN 1.03 KP 0.80 ! LA 1.02 MK 1.11 NL 1.13 OV 0.94 ! PT 0.95 SC 1.12 ! ! ! Correcting IF 5. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 1.00 KP 0.77 ! LA 0.96 MK 0.98 NL 1.22 OV 1.03 ! PT 0.94 SC 1.06 ! ! ! Correcting IF 6. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.07 HN 1.04 KP 0.76 ! LA 1.03 MK 0.89 NL 1.05 OV 1.03 ! PT 0.95 SC 1.04 ! ! ! Correcting IF 7. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.12 HN 1.02 KP 0.82 ! LA 1.10 MK 1.05 NL 1.20 OV 1.02 ! PT 0.97 SC 0.95 ! ! ! Correcting IF 8. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.10 HN 1.04 KP 0.78 ! LA 1.01 MK 0.98 NL 1.19 OV 1.03 ! PT 0.86 SC 1.07 ! ! ! Correcting IF 9. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.05 HN 0.99 KP 0.74 ! LA 0.99 MK 0.94 NL 1.16 OV 1.00 ! PT 0.93 SC 0.98 ! ! ! Correcting IF 10. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 1.00 KP 0.80 ! LA 1.00 MK 0.94 NL 1.06 OV 1.03 ! PT 0.89 SC 1.00 ! ! ! Correcting IF 11. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.06 HN 1.01 KP 0.86 ! LA 1.00 MK 0.84 NL 1.01 OV 0.99 ! PT 1.03 SC 0.95 ! ! ! Correcting IF 12. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 0.91 KP 0.85 ! LA 1.03 MK 0.94 NL 1.07 OV 0.99 ! PT 0.94 SC 0.96 ! ! ! Fit before self-cal, rms=0.069239Jy sigma=0.000764 ! Fit after self-cal, rms=0.068247Jy sigma=0.000761 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8881 mas, bmaj=2.361 mas, bpa=0.3637 degrees ! Estimated noise=278.575 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00111787 Jy ! Component: 100 - total flux cleaned = 0.00114692 Jy ! Component: 150 - total flux cleaned = 0.00119684 Jy ! Component: 200 - total flux cleaned = 0.00119579 Jy ! Total flux subtracted in 200 components = 0.00119579 Jy ! Clean residual min=-0.000852 max=0.001291 Jy/beam ! Clean residual mean=0.000002 rms=0.000264 Jy/beam ! Combined flux in latest and established models = 0.063538 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 66 components and 0.0635381 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068211Jy sigma=0.000760 ! Fit after self-cal, rms=0.068225Jy sigma=0.000759 ! Inverting map ! Added new window around map position (-9.6, 18). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00124678 Jy ! Component: 100 - total flux cleaned = 0.00143925 Jy ! Component: 150 - total flux cleaned = 0.00148641 Jy ! Component: 200 - total flux cleaned = 0.00150687 Jy ! Total flux subtracted in 200 components = 0.00150687 Jy ! Clean residual min=-0.000816 max=0.000972 Jy/beam ! Clean residual mean=-0.000000 rms=0.000239 Jy/beam ! Combined flux in latest and established models = 0.0650449 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 80 components and 0.0650449 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068193Jy sigma=0.000759 ! Fit after self-cal, rms=0.068161Jy sigma=0.000759 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068161Jy sigma=0.000759 ! Fit after self-cal, rms=0.067713Jy sigma=0.000758 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8839 mas, bmaj=2.348 mas, bpa=0.2614 degrees ! Estimated noise=276.817 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000794172 Jy ! Component: 100 - total flux cleaned = 0.000925088 Jy ! Component: 150 - total flux cleaned = 0.000965904 Jy ! Component: 200 - total flux cleaned = 0.000949142 Jy ! Total flux subtracted in 200 components = 0.000949142 Jy ! Clean residual min=-0.000784 max=0.000986 Jy/beam ! Clean residual mean=0.000001 rms=0.000212 Jy/beam ! Combined flux in latest and established models = 0.0659941 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 91 components and 0.0659941 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067691Jy sigma=0.000758 ! Fit after self-cal, rms=0.067684Jy sigma=0.000758 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000270172 Jy ! Component: 100 - total flux cleaned = 0.000250244 Jy ! Component: 150 - total flux cleaned = 0.000250016 Jy ! Component: 200 - total flux cleaned = 0.000234399 Jy ! Total flux subtracted in 200 components = 0.000234399 Jy ! Clean residual min=-0.000765 max=0.000943 Jy/beam ! Clean residual mean=0.000000 rms=0.000212 Jy/beam ! Combined flux in latest and established models = 0.0662285 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 99 components and 0.0662285 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067671Jy sigma=0.000757 ! Fit after self-cal, rms=0.067660Jy sigma=0.000757 ! Inverting map ! Added new window around map position (-3.8, -5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000928421 Jy ! Component: 100 - total flux cleaned = 0.00128546 Jy ! Component: 150 - total flux cleaned = 0.00140084 Jy ! Component: 200 - total flux cleaned = 0.00145056 Jy ! Total flux subtracted in 200 components = 0.00145056 Jy ! Clean residual min=-0.000767 max=0.000745 Jy/beam ! Clean residual mean=-0.000001 rms=0.000191 Jy/beam ! Combined flux in latest and established models = 0.067679 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 113 components and 0.067679 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067643Jy sigma=0.000757 ! Fit after self-cal, rms=0.067629Jy sigma=0.000757 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067629Jy sigma=0.000757 ! Fit after self-cal, rms=0.067248Jy sigma=0.000757 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8819 mas, bmaj=2.34 mas, bpa=0.2002 degrees ! Estimated noise=275.182 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000780904 Jy ! Component: 100 - total flux cleaned = 0.00103636 Jy ! Component: 150 - total flux cleaned = 0.00112481 Jy ! Component: 200 - total flux cleaned = 0.00117254 Jy ! Total flux subtracted in 200 components = 0.00117254 Jy ! Clean residual min=-0.000636 max=0.000581 Jy/beam ! Clean residual mean=-0.000001 rms=0.000168 Jy/beam ! Combined flux in latest and established models = 0.0688516 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 119 components and 0.0688516 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067235Jy sigma=0.000757 ! Fit after self-cal, rms=0.067228Jy sigma=0.000757 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000283668 Jy ! Component: 100 - total flux cleaned = 0.000301222 Jy ! Component: 150 - total flux cleaned = 0.000317561 Jy ! Component: 200 - total flux cleaned = 0.000332345 Jy ! Total flux subtracted in 200 components = 0.000332345 Jy ! Clean residual min=-0.000670 max=0.000636 Jy/beam ! Clean residual mean=-0.000001 rms=0.000168 Jy/beam ! Combined flux in latest and established models = 0.0691839 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 119 components and 0.0691839 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067220Jy sigma=0.000757 ! Fit after self-cal, rms=0.067212Jy sigma=0.000757 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067212Jy sigma=0.000757 ! Fit after self-cal, rms=0.067052Jy sigma=0.000757 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.178 mas, bmaj=4.79 mas, bpa=-5.132 degrees ! Estimated noise=340.427 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000526836 Jy ! Component: 100 - total flux cleaned = 0.000610365 Jy ! Component: 150 - total flux cleaned = 0.000633321 Jy ! Component: 200 - total flux cleaned = 0.000633117 Jy ! Total flux subtracted in 200 components = 0.000633117 Jy ! Clean residual min=-0.000642 max=0.000711 Jy/beam ! Clean residual mean=-0.000002 rms=0.000175 Jy/beam ! Combined flux in latest and established models = 0.069817 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 128 components and 0.069817 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067047Jy sigma=0.000757 ! Fit after self-cal, rms=0.067039Jy sigma=0.000756 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.17869e-05 Jy ! Component: 100 - total flux cleaned = 8.18656e-05 Jy ! Component: 150 - total flux cleaned = 8.12393e-05 Jy ! Component: 200 - total flux cleaned = 8.04015e-05 Jy ! Total flux subtracted in 200 components = 8.04015e-05 Jy ! Clean residual min=-0.000626 max=0.000656 Jy/beam ! Clean residual mean=-0.000002 rms=0.000174 Jy/beam ! Combined flux in latest and established models = 0.0698974 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 134 components and 0.0698974 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067036Jy sigma=0.000756 ! Fit after self-cal, rms=0.067032Jy sigma=0.000756 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.8805 mas, bmaj=2.333 mas, bpa=0.1552 degrees ! Estimated noise=274.343 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8805 x 2.333 at 0.1552 degrees (North through East) ! Clean map min=-0.00075747 max=0.039439 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6941 mas, bmaj=1.882 mas, bpa=-2.579 degrees ! Estimated noise=544.159 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0306824 Jy ! Component: 100 - total flux cleaned = 0.0414351 Jy ! Component: 150 - total flux cleaned = 0.0476109 Jy ! Component: 200 - total flux cleaned = 0.0521481 Jy ! Total flux subtracted in 200 components = 0.0521481 Jy ! Clean residual min=-0.002377 max=0.003358 Jy/beam ! Clean residual mean=0.000003 rms=0.000687 Jy/beam ! Combined flux in latest and established models = 0.0521481 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.0521481 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8805 mas, bmaj=2.333 mas, bpa=0.1552 degrees ! Estimated noise=274.343 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00573798 Jy ! Component: 100 - total flux cleaned = 0.00925427 Jy ! Component: 150 - total flux cleaned = 0.0116382 Jy ! Component: 200 - total flux cleaned = 0.013421 Jy ! Total flux subtracted in 200 components = 0.013421 Jy ! Clean residual min=-0.001113 max=0.001688 Jy/beam ! Clean residual mean=0.000004 rms=0.000326 Jy/beam ! Combined flux in latest and established models = 0.0655691 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 47 components and 0.0655691 Jy ! Inverting map ! Added new window around map position (-1, -0.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00159859 Jy ! Component: 100 - total flux cleaned = 0.00236485 Jy ! Component: 150 - total flux cleaned = 0.00295613 Jy ! Component: 200 - total flux cleaned = 0.00330348 Jy ! Total flux subtracted in 200 components = 0.00330348 Jy ! Clean residual min=-0.000896 max=0.000941 Jy/beam ! Clean residual mean=0.000001 rms=0.000221 Jy/beam ! Combined flux in latest and established models = 0.0688726 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 65 components and 0.0688726 Jy ! Inverting map ! Added new window around map position (1, 0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000633033 Jy ! Component: 100 - total flux cleaned = 0.000807465 Jy ! Component: 150 - total flux cleaned = 0.00087469 Jy ! Component: 200 - total flux cleaned = 0.000915811 Jy ! Total flux subtracted in 200 components = 0.000915811 Jy ! Clean residual min=-0.000820 max=0.000608 Jy/beam ! Clean residual mean=0.000000 rms=0.000187 Jy/beam ! Combined flux in latest and established models = 0.0697884 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 81 components and 0.0697884 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.178 mas, bmaj=4.79 mas, bpa=-5.132 degrees ! Estimated noise=340.427 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.90087e-05 Jy ! Component: 100 - total flux cleaned = 7.33993e-05 Jy ! Component: 150 - total flux cleaned = 7.37699e-05 Jy ! Component: 200 - total flux cleaned = 6.26484e-05 Jy ! Total flux subtracted in 200 components = 6.26484e-05 Jy ! Clean residual min=-0.000717 max=0.000673 Jy/beam ! Clean residual mean=-0.000001 rms=0.000190 Jy/beam ! Combined flux in latest and established models = 0.069851 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.0108e-05 Jy ! Component: 100 - total flux cleaned = -1.01111e-05 Jy ! Component: 150 - total flux cleaned = -2.7842e-05 Jy ! Component: 200 - total flux cleaned = -4.4372e-05 Jy ! Total flux subtracted in 200 components = -4.4372e-05 Jy ! Clean residual min=-0.000683 max=0.000670 Jy/beam ! Clean residual mean=-0.000001 rms=0.000181 Jy/beam ! Combined flux in latest and established models = 0.0698067 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 103 components and 0.0698067 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8805 mas, bmaj=2.333 mas, bpa=0.1552 degrees ! Estimated noise=274.343 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.56078e-05 Jy ! Component: 100 - total flux cleaned = -3.64204e-05 Jy ! Component: 150 - total flux cleaned = 1.01221e-05 Jy ! Component: 200 - total flux cleaned = 3.90989e-05 Jy ! Total flux subtracted in 200 components = 3.90989e-05 Jy ! Clean residual min=-0.000702 max=0.000556 Jy/beam ! Clean residual mean=-0.000000 rms=0.000162 Jy/beam ! Combined flux in latest and established models = 0.0698458 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 122 components and 0.0698458 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067027Jy sigma=0.000756 ! Fit after self-cal, rms=0.067006Jy sigma=0.000756 wmodel J1210-1217_X_2014_06_09_pus_map.mod ! Writing 122 model components to file: J1210-1217_X_2014_06_09_pus_map.mod wobs J1210-1217_X_2014_06_09_pus_uvs.fits ! Writing UV FITS file: J1210-1217_X_2014_06_09_pus_uvs.fits wwins J1210-1217_X_2014_06_09_pus_map.win ! wwins: Wrote 6 windows to J1210-1217_X_2014_06_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -8.22425e-06 Jy ! Component: 100 - total flux cleaned = -2.89431e-05 Jy ! Component: 150 - total flux cleaned = -8.73658e-05 Jy ! Component: 200 - total flux cleaned = -0.000189981 Jy ! Component: 250 - total flux cleaned = -0.000244071 Jy ! Component: 300 - total flux cleaned = -0.000305331 Jy ! Component: 350 - total flux cleaned = -0.000356047 Jy ! Component: 400 - total flux cleaned = -0.000421646 Jy ! Component: 450 - total flux cleaned = -0.000469471 Jy ! Component: 500 - total flux cleaned = -0.00050866 Jy ! Component: 550 - total flux cleaned = -0.000547024 Jy ! Component: 600 - total flux cleaned = -0.000614415 Jy ! Component: 650 - total flux cleaned = -0.000643897 Jy ! Component: 700 - total flux cleaned = -0.0007159 Jy ! Component: 750 - total flux cleaned = -0.000751088 Jy ! Component: 800 - total flux cleaned = -0.000785663 Jy ! Component: 850 - total flux cleaned = -0.000812777 Jy ! Component: 900 - total flux cleaned = -0.000832811 Jy ! Component: 950 - total flux cleaned = -0.000859078 Jy ! Component: 1000 - total flux cleaned = -0.000858943 Jy ! Component: 1050 - total flux cleaned = -0.000871816 Jy ! Component: 1100 - total flux cleaned = -0.000884531 Jy ! Component: 1150 - total flux cleaned = -0.000921857 Jy ! Component: 1200 - total flux cleaned = -0.000928003 Jy ! Component: 1250 - total flux cleaned = -0.000940188 Jy ! Component: 1300 - total flux cleaned = -0.000964183 Jy ! Component: 1350 - total flux cleaned = -0.000970092 Jy ! Component: 1400 - total flux cleaned = -0.000987724 Jy ! Component: 1450 - total flux cleaned = -0.00102264 Jy ! Component: 1500 - total flux cleaned = -0.0010398 Jy ! Component: 1550 - total flux cleaned = -0.00104544 Jy ! Component: 1600 - total flux cleaned = -0.00108477 Jy ! Component: 1650 - total flux cleaned = -0.00107372 Jy ! Component: 1700 - total flux cleaned = -0.0011068 Jy ! Component: 1750 - total flux cleaned = -0.00112314 Jy ! Component: 1800 - total flux cleaned = -0.00113388 Jy ! Component: 1850 - total flux cleaned = -0.00114461 Jy ! Component: 1900 - total flux cleaned = -0.00118167 Jy ! Component: 1950 - total flux cleaned = -0.001213 Jy ! Component: 2000 - total flux cleaned = -0.00122323 Jy ! Total flux subtracted in 2048 components = -0.00123343 Jy ! Clean residual min=-0.000295 max=0.000310 Jy/beam ! Clean residual mean=0.000002 rms=0.000093 Jy/beam ! Combined flux in latest and established models = 0.0686123 Jy keep ! Adding 139 model components to the UV plane model. ! The established model now contains 261 components and 0.0686123 Jy ![Exited script file: muppet] wmap "J1210-1217_X_2014_06_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8805 x 2.333 at 0.1552 degrees (North through East) ! Clean map min=-0.00075315 max=0.038441 Jy/beam ! Writing clean map to FITS file: J1210-1217_X_2014_06_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.038441 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 9.33166e-05 device "J1210-1217_X_2014_06_09_pus\_map.eps/VPS" ! Attempting to open device: 'J1210-1217_X_2014_06_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.728258 0.728258 1.45652 2.91303 5.82607 11.6521 23.3043 46.6085 93.2171 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0002 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.038 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8805 x 2.333 at 0.1552 degrees (North through East) ! Clean map min=-0.00075315 max=0.038441 Jy/beam quit ! Quitting program ! Log file J1210-1217_X_2014_06_09_pus_uvs.log closed on Sat Nov 19 00:12:03 2016