! Started logfile: J1209-2032_S_2014_08_09_pus_uvs.log on Tue Nov 29 23:04:33 2016 obs J1209-2032_S_2014_08_09_pus_uva.fits ! Reading UV FITS file: J1209-2032_S_2014_08_09_pus_uva.fits ! AN table 1: 57 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.938402 visibilities/baseline/integration-bin. ! Found source: J1209-2032 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 342 lines of history. ! ! Reading 9628 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1209-2032_S_2014_08_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.875054Jy sigma=0.007885 ! Fit after self-cal, rms=0.865004Jy sigma=0.007800 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.546 mas, bmaj=6.534 mas, bpa=-4.052 degrees ! Estimated noise=1091.57 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.107101 Jy ! Component: 100 - total flux cleaned = 0.137045 Jy ! Total flux subtracted in 100 components = 0.137045 Jy ! Clean residual min=-0.013203 max=0.062632 Jy/beam ! Clean residual mean=-0.000106 rms=0.004934 Jy/beam ! Combined flux in latest and established models = 0.137045 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.137045 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140151Jy sigma=0.001243 ! Fit after self-cal, rms=0.140122Jy sigma=0.001243 ! Inverting map ! Added new window around map position (15.5, 12). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0507441 Jy ! Component: 100 - total flux cleaned = 0.0728529 Jy ! Total flux subtracted in 100 components = 0.0728529 Jy ! Clean residual min=-0.010137 max=0.030573 Jy/beam ! Clean residual mean=-0.000070 rms=0.003155 Jy/beam ! Combined flux in latest and established models = 0.209898 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 30 components and 0.209898 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115212Jy sigma=0.000998 ! Fit after self-cal, rms=0.112939Jy sigma=0.000978 ! Inverting map ! Added new window around map position (21.5, 13). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0291272 Jy ! Component: 100 - total flux cleaned = 0.0454759 Jy ! Total flux subtracted in 100 components = 0.0454759 Jy ! Clean residual min=-0.006069 max=0.012540 Jy/beam ! Clean residual mean=-0.000044 rms=0.002020 Jy/beam ! Combined flux in latest and established models = 0.255373 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 49 components and 0.255373 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101986Jy sigma=0.000871 ! Fit after self-cal, rms=0.101303Jy sigma=0.000864 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0138195 Jy ! Component: 100 - total flux cleaned = 0.02411 Jy ! Total flux subtracted in 100 components = 0.02411 Jy ! Clean residual min=-0.005427 max=0.008818 Jy/beam ! Clean residual mean=-0.000032 rms=0.001616 Jy/beam ! Combined flux in latest and established models = 0.279483 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 71 components and 0.279483 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098017Jy sigma=0.000833 ! Fit after self-cal, rms=0.097958Jy sigma=0.000832 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.169 mas, bmaj=7.69 mas, bpa=-4.058 degrees ! Estimated noise=810.708 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0139444 Jy ! Component: 100 - total flux cleaned = 0.0240664 Jy ! Component: 150 - total flux cleaned = 0.0318525 Jy ! Component: 200 - total flux cleaned = 0.0379297 Jy ! Total flux subtracted in 200 components = 0.0379297 Jy ! Clean residual min=-0.004657 max=0.009473 Jy/beam ! Clean residual mean=-0.000039 rms=0.001483 Jy/beam ! Combined flux in latest and established models = 0.317413 Jy ! Performing phase self-cal ! Adding 70 model components to the UV plane model. ! The established model now contains 120 components and 0.317413 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095170Jy sigma=0.000807 ! Fit after self-cal, rms=0.095156Jy sigma=0.000806 ! Inverting map ! Added new window around map position (-5, -7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0089883 Jy ! Component: 100 - total flux cleaned = 0.0144444 Jy ! Component: 150 - total flux cleaned = 0.0185613 Jy ! Component: 200 - total flux cleaned = 0.0218244 Jy ! Total flux subtracted in 200 components = 0.0218244 Jy ! Clean residual min=-0.003786 max=0.004323 Jy/beam ! Clean residual mean=-0.000019 rms=0.001052 Jy/beam ! Combined flux in latest and established models = 0.339238 Jy ! Performing phase self-cal ! Adding 62 model components to the UV plane model. ! The established model now contains 176 components and 0.339238 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094090Jy sigma=0.000797 ! Fit after self-cal, rms=0.094031Jy sigma=0.000797 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.87 HN 1.02 KP 1.04 ! LA 1.11 MK 1.04 NL 1.05 OV 0.98 ! PT 1.01 SC 1.05 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.02 HN 1.10 KP 1.00 ! LA 1.04 MK 0.97 NL 1.06 OV 1.02 ! PT 0.99 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.17 HN 1.09 KP 0.89 ! LA 0.81 MK 1.08 NL 1.06 OV 0.92 ! PT 0.95 SC 1.03 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.03 HN 1.01 KP 0.85 ! LA 0.79 MK 0.96 NL 1.07 OV 0.97 ! PT 1.01 SC 0.94 ! ! ! Fit before self-cal, rms=0.094031Jy sigma=0.000797 ! Fit after self-cal, rms=0.090810Jy sigma=0.000775 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.194 mas, bmaj=7.725 mas, bpa=-3.845 degrees ! Estimated noise=805.163 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000927459 Jy ! Component: 100 - total flux cleaned = 0.00118712 Jy ! Component: 150 - total flux cleaned = 0.00127753 Jy ! Component: 200 - total flux cleaned = 0.00140046 Jy ! Total flux subtracted in 200 components = 0.00140046 Jy ! Clean residual min=-0.002426 max=0.002474 Jy/beam ! Clean residual mean=-0.000001 rms=0.000660 Jy/beam ! Combined flux in latest and established models = 0.340638 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 194 components and 0.340638 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090759Jy sigma=0.000775 ! Fit after self-cal, rms=0.090778Jy sigma=0.000775 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090778Jy sigma=0.000775 ! Fit after self-cal, rms=0.091535Jy sigma=0.000773 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.194 mas, bmaj=7.725 mas, bpa=-3.92 degrees ! Estimated noise=806.822 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000827108 Jy ! Component: 100 - total flux cleaned = 0.00114092 Jy ! Component: 150 - total flux cleaned = 0.00127812 Jy ! Component: 200 - total flux cleaned = 0.00134245 Jy ! Total flux subtracted in 200 components = 0.00134245 Jy ! Clean residual min=-0.002237 max=0.002393 Jy/beam ! Clean residual mean=0.000001 rms=0.000604 Jy/beam ! Combined flux in latest and established models = 0.341981 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 207 components and 0.34198 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091507Jy sigma=0.000773 ! Fit after self-cal, rms=0.091518Jy sigma=0.000773 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000263489 Jy ! Component: 100 - total flux cleaned = 0.000348533 Jy ! Component: 150 - total flux cleaned = 0.000401818 Jy ! Component: 200 - total flux cleaned = 0.000452315 Jy ! Total flux subtracted in 200 components = 0.000452315 Jy ! Clean residual min=-0.002230 max=0.002412 Jy/beam ! Clean residual mean=0.000001 rms=0.000597 Jy/beam ! Combined flux in latest and established models = 0.342433 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 212 components and 0.342433 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091503Jy sigma=0.000773 ! Fit after self-cal, rms=0.091503Jy sigma=0.000773 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091503Jy sigma=0.000773 ! Fit after self-cal, rms=0.091821Jy sigma=0.000773 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.195 mas, bmaj=7.724 mas, bpa=-3.903 degrees ! Estimated noise=808.117 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000465543 Jy ! Component: 100 - total flux cleaned = 0.000619056 Jy ! Component: 150 - total flux cleaned = 0.00069006 Jy ! Component: 200 - total flux cleaned = 0.000735939 Jy ! Total flux subtracted in 200 components = 0.000735939 Jy ! Clean residual min=-0.002261 max=0.002385 Jy/beam ! Clean residual mean=0.000001 rms=0.000591 Jy/beam ! Combined flux in latest and established models = 0.343169 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 214 components and 0.343169 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091809Jy sigma=0.000773 ! Fit after self-cal, rms=0.091810Jy sigma=0.000773 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.37605e-05 Jy ! Component: 100 - total flux cleaned = 0.000115441 Jy ! Component: 150 - total flux cleaned = 0.000136452 Jy ! Component: 200 - total flux cleaned = 0.000136844 Jy ! Total flux subtracted in 200 components = 0.000136844 Jy ! Clean residual min=-0.002248 max=0.002390 Jy/beam ! Clean residual mean=0.000002 rms=0.000587 Jy/beam ! Combined flux in latest and established models = 0.343306 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 217 components and 0.343306 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091801Jy sigma=0.000772 ! Fit after self-cal, rms=0.091801Jy sigma=0.000772 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091801Jy sigma=0.000772 ! Fit after self-cal, rms=0.091958Jy sigma=0.000772 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.82 mas, bmaj=16.18 mas, bpa=0.1834 degrees ! Estimated noise=1001.64 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000655555 Jy ! Component: 100 - total flux cleaned = 0.00092287 Jy ! Component: 150 - total flux cleaned = 0.000923597 Jy ! Component: 200 - total flux cleaned = 0.000924246 Jy ! Total flux subtracted in 200 components = 0.000924246 Jy ! Clean residual min=-0.002304 max=0.002532 Jy/beam ! Clean residual mean=0.000003 rms=0.000695 Jy/beam ! Combined flux in latest and established models = 0.34423 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 228 components and 0.34423 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091958Jy sigma=0.000772 ! Fit after self-cal, rms=0.091956Jy sigma=0.000772 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.75308e-05 Jy ! Component: 100 - total flux cleaned = 3.57863e-05 Jy ! Component: 150 - total flux cleaned = 1.49283e-05 Jy ! Component: 200 - total flux cleaned = -4.68162e-06 Jy ! Total flux subtracted in 200 components = -4.68162e-06 Jy ! Clean residual min=-0.002320 max=0.002468 Jy/beam ! Clean residual mean=0.000003 rms=0.000689 Jy/beam ! Combined flux in latest and established models = 0.344225 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 234 components and 0.344225 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091961Jy sigma=0.000772 ! Fit after self-cal, rms=0.091960Jy sigma=0.000772 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.195 mas, bmaj=7.722 mas, bpa=-3.891 degrees ! Estimated noise=808.827 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.195 x 7.722 at -3.891 degrees (North through East) ! Clean map min=-0.0021582 max=0.13684 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.555 mas, bmaj=6.523 mas, bpa=-3.978 degrees ! Estimated noise=1097.44 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.115654 Jy ! Component: 100 - total flux cleaned = 0.168444 Jy ! Component: 150 - total flux cleaned = 0.202088 Jy ! Component: 200 - total flux cleaned = 0.226034 Jy ! Total flux subtracted in 200 components = 0.226034 Jy ! Clean residual min=-0.007328 max=0.013834 Jy/beam ! Clean residual mean=-0.000048 rms=0.002241 Jy/beam ! Combined flux in latest and established models = 0.226034 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.226034 Jy ! Inverting map and beam ! Estimated beam: bmin=3.195 mas, bmaj=7.722 mas, bpa=-3.891 degrees ! Estimated noise=808.827 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (18, 11.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.027858 Jy ! Component: 100 - total flux cleaned = 0.0468276 Jy ! Component: 150 - total flux cleaned = 0.0608644 Jy ! Component: 200 - total flux cleaned = 0.0716228 Jy ! Total flux subtracted in 200 components = 0.0716228 Jy ! Clean residual min=-0.004056 max=0.006327 Jy/beam ! Clean residual mean=-0.000038 rms=0.001391 Jy/beam ! Combined flux in latest and established models = 0.297657 Jy ! Adding 77 model components to the UV plane model. ! The established model now contains 93 components and 0.297657 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00839463 Jy ! Component: 100 - total flux cleaned = 0.0150319 Jy ! Component: 150 - total flux cleaned = 0.0203288 Jy ! Component: 200 - total flux cleaned = 0.0245931 Jy ! Total flux subtracted in 200 components = 0.0245931 Jy ! Clean residual min=-0.002731 max=0.003387 Jy/beam ! Clean residual mean=-0.000016 rms=0.000798 Jy/beam ! Combined flux in latest and established models = 0.32225 Jy ! Adding 66 model components to the UV plane model. ! The established model now contains 144 components and 0.32225 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.82 mas, bmaj=16.18 mas, bpa=0.1834 degrees ! Estimated noise=1001.64 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00605891 Jy ! Component: 100 - total flux cleaned = 0.0100317 Jy ! Component: 150 - total flux cleaned = 0.012906 Jy ! Component: 200 - total flux cleaned = 0.0150466 Jy ! Total flux subtracted in 200 components = 0.0150466 Jy ! Clean residual min=-0.002451 max=0.002356 Jy/beam ! Clean residual mean=-0.000008 rms=0.000754 Jy/beam ! Combined flux in latest and established models = 0.337297 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00163779 Jy ! Component: 100 - total flux cleaned = 0.00290006 Jy ! Component: 150 - total flux cleaned = 0.00387941 Jy ! Component: 200 - total flux cleaned = 0.00459275 Jy ! Total flux subtracted in 200 components = 0.00459275 Jy ! Clean residual min=-0.002152 max=0.002330 Jy/beam ! Clean residual mean=-0.000001 rms=0.000691 Jy/beam ! Combined flux in latest and established models = 0.341889 Jy ! Adding 123 model components to the UV plane model. ! The established model now contains 254 components and 0.341889 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.195 mas, bmaj=7.722 mas, bpa=-3.891 degrees ! Estimated noise=808.827 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.18491e-05 Jy ! Component: 100 - total flux cleaned = 0.000273118 Jy ! Component: 150 - total flux cleaned = 0.000484419 Jy ! Component: 200 - total flux cleaned = 0.0006781 Jy ! Total flux subtracted in 200 components = 0.0006781 Jy ! Clean residual min=-0.002216 max=0.002169 Jy/beam ! Clean residual mean=0.000001 rms=0.000578 Jy/beam ! Combined flux in latest and established models = 0.342567 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 274 components and 0.342567 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091965Jy sigma=0.000772 ! Fit after self-cal, rms=0.091945Jy sigma=0.000772 wmodel J1209-2032_S_2014_08_09_pus_map.mod ! Writing 274 model components to file: J1209-2032_S_2014_08_09_pus_map.mod wobs J1209-2032_S_2014_08_09_pus_uvs.fits ! Writing UV FITS file: J1209-2032_S_2014_08_09_pus_uvs.fits wwins J1209-2032_S_2014_08_09_pus_map.win ! wwins: Wrote 5 windows to J1209-2032_S_2014_08_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000117105 Jy ! Component: 100 - total flux cleaned = 0.000393402 Jy ! Component: 150 - total flux cleaned = 0.000394483 Jy ! Component: 200 - total flux cleaned = 0.000467461 Jy ! Component: 250 - total flux cleaned = 0.000573185 Jy ! Component: 300 - total flux cleaned = 0.000607783 Jy ! Component: 350 - total flux cleaned = 0.000708669 Jy ! Component: 400 - total flux cleaned = 0.000807101 Jy ! Component: 450 - total flux cleaned = 0.000806879 Jy ! Component: 500 - total flux cleaned = 0.000807291 Jy ! Component: 550 - total flux cleaned = 0.000807361 Jy ! Component: 600 - total flux cleaned = 0.000928758 Jy ! Component: 650 - total flux cleaned = 0.000988395 Jy ! Component: 700 - total flux cleaned = 0.00104749 Jy ! Component: 750 - total flux cleaned = 0.00110485 Jy ! Component: 800 - total flux cleaned = 0.00110455 Jy ! Component: 850 - total flux cleaned = 0.0010483 Jy ! Component: 900 - total flux cleaned = 0.000992419 Jy ! Component: 950 - total flux cleaned = 0.000910388 Jy ! Component: 1000 - total flux cleaned = 0.000802672 Jy ! Component: 1050 - total flux cleaned = 0.000749785 Jy ! Component: 1100 - total flux cleaned = 0.000749941 Jy ! Component: 1150 - total flux cleaned = 0.000645686 Jy ! Component: 1200 - total flux cleaned = 0.000568734 Jy ! Component: 1250 - total flux cleaned = 0.000467127 Jy ! Component: 1300 - total flux cleaned = 0.000366755 Jy ! Component: 1350 - total flux cleaned = 0.000366764 Jy ! Component: 1400 - total flux cleaned = 0.000293056 Jy ! Component: 1450 - total flux cleaned = 0.000123672 Jy ! Component: 1500 - total flux cleaned = 7.58874e-05 Jy ! Component: 1550 - total flux cleaned = 2.8434e-05 Jy ! Component: 1600 - total flux cleaned = -0.000136408 Jy ! Component: 1650 - total flux cleaned = -0.000276171 Jy ! Component: 1700 - total flux cleaned = -0.000391153 Jy ! Component: 1750 - total flux cleaned = -0.000459608 Jy ! Component: 1800 - total flux cleaned = -0.000527364 Jy ! Component: 1850 - total flux cleaned = -0.000661631 Jy ! Component: 1900 - total flux cleaned = -0.000839005 Jy ! Component: 1950 - total flux cleaned = -0.00097066 Jy ! Component: 2000 - total flux cleaned = -0.00101401 Jy ! Component: 2050 - total flux cleaned = -0.00118585 Jy ! Component: 2100 - total flux cleaned = -0.00127084 Jy ! Component: 2150 - total flux cleaned = -0.00133388 Jy ! Component: 2200 - total flux cleaned = -0.00141752 Jy ! Component: 2250 - total flux cleaned = -0.00152067 Jy ! Component: 2300 - total flux cleaned = -0.00156143 Jy ! Component: 2350 - total flux cleaned = -0.00164254 Jy ! Component: 2400 - total flux cleaned = -0.00166265 Jy ! Component: 2450 - total flux cleaned = -0.00178251 Jy ! Component: 2500 - total flux cleaned = -0.00184191 Jy ! Component: 2550 - total flux cleaned = -0.00197955 Jy ! Component: 2600 - total flux cleaned = -0.00207673 Jy ! Component: 2650 - total flux cleaned = -0.00217317 Jy ! Component: 2700 - total flux cleaned = -0.00226861 Jy ! Component: 2750 - total flux cleaned = -0.00228769 Jy ! Component: 2800 - total flux cleaned = -0.00243847 Jy ! Component: 2850 - total flux cleaned = -0.00255018 Jy ! Component: 2900 - total flux cleaned = -0.00258716 Jy ! Component: 2950 - total flux cleaned = -0.00269739 Jy ! Component: 3000 - total flux cleaned = -0.00275187 Jy ! Component: 3050 - total flux cleaned = -0.00280624 Jy ! Component: 3100 - total flux cleaned = -0.00282447 Jy ! Component: 3150 - total flux cleaned = -0.00293152 Jy ! Component: 3200 - total flux cleaned = -0.00303758 Jy ! Component: 3250 - total flux cleaned = -0.00310774 Jy ! Component: 3300 - total flux cleaned = -0.00315979 Jy ! Component: 3350 - total flux cleaned = -0.00312517 Jy ! Component: 3400 - total flux cleaned = -0.00322832 Jy ! Component: 3450 - total flux cleaned = -0.0032455 Jy ! Component: 3500 - total flux cleaned = -0.00334728 Jy ! Component: 3550 - total flux cleaned = -0.00341467 Jy ! Component: 3600 - total flux cleaned = -0.0034481 Jy ! Component: 3650 - total flux cleaned = -0.00354777 Jy ! Component: 3700 - total flux cleaned = -0.00359717 Jy ! Component: 3750 - total flux cleaned = -0.00364646 Jy ! Component: 3800 - total flux cleaned = -0.00371186 Jy ! Component: 3850 - total flux cleaned = -0.00367945 Jy ! Component: 3900 - total flux cleaned = -0.00374401 Jy ! Component: 3950 - total flux cleaned = -0.00379202 Jy ! Component: 4000 - total flux cleaned = -0.00382405 Jy ! Component: 4050 - total flux cleaned = -0.00390338 Jy ! Total flux subtracted in 4096 components = -0.00396652 Jy ! Clean residual min=-0.000984 max=0.000872 Jy/beam ! Clean residual mean=0.000002 rms=0.000291 Jy/beam ! Combined flux in latest and established models = 0.338601 Jy keep ! Adding 286 model components to the UV plane model. ! The established model now contains 560 components and 0.338601 Jy ![Exited script file: muppet] wmap "J1209-2032_S_2014_08_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.195 x 7.722 at -3.891 degrees (North through East) ! Clean map min=-0.0022055 max=0.13731 Jy/beam ! Writing clean map to FITS file: J1209-2032_S_2014_08_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.137315 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000288186 device "J1209-2032_S_2014_08_09_pus\_map.eps/VPS" ! Attempting to open device: 'J1209-2032_S_2014_08_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.629616 0.629616 1.25923 2.51846 5.03693 10.0739 20.1477 40.2954 80.5908 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.137 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.195 x 7.722 at -3.891 degrees (North through East) ! Clean map min=-0.0022055 max=0.13731 Jy/beam quit ! Quitting program ! Log file J1209-2032_S_2014_08_09_pus_uvs.log closed on Tue Nov 29 23:04:38 2016