! Started logfile: J1209+4119_S_2015_01_22_pus_uvs.log on Tue Jan 3 22:53:01 2017 obs J1209+4119_S_2015_01_22_pus_uva.fits ! Reading UV FITS file: J1209+4119_S_2015_01_22_pus_uva.fits ! AN table 1: 30 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.622222 visibilities/baseline/integration-bin. ! Found source: J1209+4119 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 281 lines of history. ! ! Reading 3360 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1209+4119_S_2015_01_22_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 60 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 60 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 60 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 60 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.869785Jy sigma=0.010431 ! Fit after self-cal, rms=0.860943Jy sigma=0.010328 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.156 mas, bmaj=9.001 mas, bpa=-60.68 degrees ! Estimated noise=1428.52 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.109098 Jy ! Component: 100 - total flux cleaned = 0.133043 Jy ! Total flux subtracted in 100 components = 0.133043 Jy ! Clean residual min=-0.008489 max=0.014525 Jy/beam ! Clean residual mean=0.000037 rms=0.002668 Jy/beam ! Combined flux in latest and established models = 0.133043 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.133043 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078167Jy sigma=0.000847 ! Fit after self-cal, rms=0.078167Jy sigma=0.000847 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.983 mas, bmaj=9.286 mas, bpa=-58.29 degrees ! Estimated noise=1045.66 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0126009 Jy ! Component: 100 - total flux cleaned = 0.0198759 Jy ! Component: 150 - total flux cleaned = 0.0247211 Jy ! Component: 200 - total flux cleaned = 0.0281369 Jy ! Total flux subtracted in 200 components = 0.0281369 Jy ! Clean residual min=-0.008151 max=0.010132 Jy/beam ! Clean residual mean=0.000032 rms=0.002368 Jy/beam ! Combined flux in latest and established models = 0.16118 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 0.16118 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075968Jy sigma=0.000819 ! Fit after self-cal, rms=0.075937Jy sigma=0.000818 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00* HN 0.96 KP 1.12 ! LA 0.97 MK 1.00* NL 1.02 OV 0.95 ! PT 1.04 SC 1.09 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00* HN 1.00 KP 1.01 ! LA 0.93 MK 1.00* NL 1.26 OV 0.96 ! PT 1.05 SC 1.10 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.00* HN 0.99 KP 0.88 ! LA 0.79 MK 1.00* NL 1.49 OV 0.90 ! PT 1.03 SC 1.06 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.00* HN 0.92 KP 0.81 ! LA 0.85 MK 1.00* NL 0.97 OV 0.88 ! PT 1.09 SC 1.06 ! ! ! Fit before self-cal, rms=0.075937Jy sigma=0.000818 ! Fit after self-cal, rms=0.072151Jy sigma=0.000771 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.967 mas, bmaj=9.361 mas, bpa=-59.71 degrees ! Estimated noise=1045.12 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00377123 Jy ! Component: 100 - total flux cleaned = -0.00490139 Jy ! Component: 150 - total flux cleaned = -0.00535944 Jy ! Component: 200 - total flux cleaned = -0.00584337 Jy ! Total flux subtracted in 200 components = -0.00584337 Jy ! Clean residual min=-0.003793 max=0.005092 Jy/beam ! Clean residual mean=0.000001 rms=0.001177 Jy/beam ! Combined flux in latest and established models = 0.155336 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 39 components and 0.155336 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071916Jy sigma=0.000769 ! Fit after self-cal, rms=0.071966Jy sigma=0.000768 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071966Jy sigma=0.000768 ! Fit after self-cal, rms=0.072405Jy sigma=0.000767 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.984 mas, bmaj=9.35 mas, bpa=-59.59 degrees ! Estimated noise=1045.49 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00182789 Jy ! Component: 100 - total flux cleaned = -0.0023729 Jy ! Component: 150 - total flux cleaned = -0.00266664 Jy ! Component: 200 - total flux cleaned = -0.00284217 Jy ! Total flux subtracted in 200 components = -0.00284217 Jy ! Clean residual min=-0.003540 max=0.004903 Jy/beam ! Clean residual mean=0.000004 rms=0.001093 Jy/beam ! Combined flux in latest and established models = 0.152494 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 49 components and 0.152494 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072346Jy sigma=0.000767 ! Fit after self-cal, rms=0.072359Jy sigma=0.000767 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-90.5, 2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0026307 Jy ! Component: 100 - total flux cleaned = 0.003322 Jy ! Component: 150 - total flux cleaned = 0.00327011 Jy ! Component: 200 - total flux cleaned = 0.00343088 Jy ! Total flux subtracted in 200 components = 0.00343088 Jy ! Clean residual min=-0.002855 max=0.003165 Jy/beam ! Clean residual mean=-0.000003 rms=0.000832 Jy/beam ! Combined flux in latest and established models = 0.155925 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 78 components and 0.155925 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072094Jy sigma=0.000764 ! Fit after self-cal, rms=0.072094Jy sigma=0.000763 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072094Jy sigma=0.000763 ! Fit after self-cal, rms=0.072290Jy sigma=0.000763 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.997 mas, bmaj=9.346 mas, bpa=-59.57 degrees ! Estimated noise=1044.27 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000505565 Jy ! Component: 100 - total flux cleaned = 0.000245227 Jy ! Component: 150 - total flux cleaned = 0.000129744 Jy ! Component: 200 - total flux cleaned = 2.30171e-05 Jy ! Total flux subtracted in 200 components = 2.30171e-05 Jy ! Clean residual min=-0.002705 max=0.003026 Jy/beam ! Clean residual mean=-0.000006 rms=0.000750 Jy/beam ! Combined flux in latest and established models = 0.155948 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 101 components and 0.155948 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072242Jy sigma=0.000763 ! Fit after self-cal, rms=0.072250Jy sigma=0.000763 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000125063 Jy ! Component: 100 - total flux cleaned = 0.000125813 Jy ! Component: 150 - total flux cleaned = -3.41665e-05 Jy ! Component: 200 - total flux cleaned = -0.000185425 Jy ! Total flux subtracted in 200 components = -0.000185425 Jy ! Clean residual min=-0.002592 max=0.002925 Jy/beam ! Clean residual mean=-0.000005 rms=0.000713 Jy/beam ! Combined flux in latest and established models = 0.155762 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 114 components and 0.155762 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072219Jy sigma=0.000762 ! Fit after self-cal, rms=0.072217Jy sigma=0.000762 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072217Jy sigma=0.000762 ! Fit after self-cal, rms=0.072259Jy sigma=0.000762 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.819 mas, bmaj=10.35 mas, bpa=-61.8 degrees ! Estimated noise=1095.63 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.21312e-05 Jy ! Component: 100 - total flux cleaned = -5.16229e-05 Jy ! Component: 150 - total flux cleaned = -0.000114542 Jy ! Component: 200 - total flux cleaned = -0.000231767 Jy ! Total flux subtracted in 200 components = -0.000231767 Jy ! Clean residual min=-0.002334 max=0.002727 Jy/beam ! Clean residual mean=-0.000011 rms=0.000766 Jy/beam ! Combined flux in latest and established models = 0.155531 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 143 components and 0.155531 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072236Jy sigma=0.000762 ! Fit after self-cal, rms=0.072233Jy sigma=0.000762 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.74236e-05 Jy ! Component: 100 - total flux cleaned = 1.45894e-05 Jy ! Component: 150 - total flux cleaned = -3.56724e-05 Jy ! Component: 200 - total flux cleaned = -0.000129858 Jy ! Total flux subtracted in 200 components = -0.000129858 Jy ! Clean residual min=-0.002312 max=0.002642 Jy/beam ! Clean residual mean=-0.000011 rms=0.000733 Jy/beam ! Combined flux in latest and established models = 0.155401 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 162 components and 0.155401 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072217Jy sigma=0.000762 ! Fit after self-cal, rms=0.072215Jy sigma=0.000762 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=5.998 mas, bmaj=9.343 mas, bpa=-59.58 degrees ! Estimated noise=1045.15 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.998 x 9.343 at -59.58 degrees (North through East) ! Clean map min=-0.0024043 max=0.14029 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.108 mas, bmaj=9.052 mas, bpa=-61.9 degrees ! Estimated noise=1430.93 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.109172 Jy ! Component: 100 - total flux cleaned = 0.133092 Jy ! Component: 150 - total flux cleaned = 0.141128 Jy ! Component: 200 - total flux cleaned = 0.145765 Jy ! Total flux subtracted in 200 components = 0.145765 Jy ! Clean residual min=-0.004070 max=0.005858 Jy/beam ! Clean residual mean=0.000006 rms=0.001272 Jy/beam ! Combined flux in latest and established models = 0.145765 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.145765 Jy ! Inverting map and beam ! Estimated beam: bmin=5.998 mas, bmaj=9.343 mas, bpa=-59.58 degrees ! Estimated noise=1045.15 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-39, -3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00560951 Jy ! Component: 100 - total flux cleaned = 0.00794709 Jy ! Component: 150 - total flux cleaned = 0.0095313 Jy ! Component: 200 - total flux cleaned = 0.0103103 Jy ! Total flux subtracted in 200 components = 0.0103103 Jy ! Clean residual min=-0.002497 max=0.002897 Jy/beam ! Clean residual mean=-0.000008 rms=0.000792 Jy/beam ! Combined flux in latest and established models = 0.156075 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 48 components and 0.156075 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.819 mas, bmaj=10.35 mas, bpa=-61.8 degrees ! Estimated noise=1095.63 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000410776 Jy ! Component: 100 - total flux cleaned = 0.000171478 Jy ! Component: 150 - total flux cleaned = 2.1429e-05 Jy ! Component: 200 - total flux cleaned = -2.29353e-05 Jy ! Total flux subtracted in 200 components = -2.29353e-05 Jy ! Clean residual min=-0.002288 max=0.002765 Jy/beam ! Clean residual mean=-0.000014 rms=0.000789 Jy/beam ! Combined flux in latest and established models = 0.156052 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.09362e-05 Jy ! Component: 100 - total flux cleaned = -0.000119403 Jy ! Component: 150 - total flux cleaned = -0.000219759 Jy ! Component: 200 - total flux cleaned = -0.000248947 Jy ! Total flux subtracted in 200 components = -0.000248947 Jy ! Clean residual min=-0.002246 max=0.002555 Jy/beam ! Clean residual mean=-0.000014 rms=0.000731 Jy/beam ! Combined flux in latest and established models = 0.155803 Jy ! Adding 82 model components to the UV plane model. ! The established model now contains 126 components and 0.155803 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=5.998 mas, bmaj=9.343 mas, bpa=-59.58 degrees ! Estimated noise=1045.15 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00016371 Jy ! Component: 100 - total flux cleaned = -0.000132246 Jy ! Component: 150 - total flux cleaned = -0.000189951 Jy ! Component: 200 - total flux cleaned = -0.00024404 Jy ! Total flux subtracted in 200 components = -0.00024404 Jy ! Clean residual min=-0.002211 max=0.002503 Jy/beam ! Clean residual mean=-0.000007 rms=0.000621 Jy/beam ! Combined flux in latest and established models = 0.155559 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 151 components and 0.155559 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072205Jy sigma=0.000762 ! Fit after self-cal, rms=0.072191Jy sigma=0.000762 wmodel J1209+4119_S_2015_01_22_pus_map.mod ! Writing 151 model components to file: J1209+4119_S_2015_01_22_pus_map.mod wobs J1209+4119_S_2015_01_22_pus_uvs.fits ! Writing UV FITS file: J1209+4119_S_2015_01_22_pus_uvs.fits wwins J1209+4119_S_2015_01_22_pus_map.win ! wwins: Wrote 3 windows to J1209+4119_S_2015_01_22_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00054073 Jy ! Component: 100 - total flux cleaned = 0.000507819 Jy ! Component: 150 - total flux cleaned = 0.000373423 Jy ! Component: 200 - total flux cleaned = 0.000185958 Jy ! Component: 250 - total flux cleaned = -4.8401e-05 Jy ! Component: 300 - total flux cleaned = -0.000270589 Jy ! Component: 350 - total flux cleaned = -0.000375537 Jy ! Component: 400 - total flux cleaned = -0.000500755 Jy ! Component: 450 - total flux cleaned = -0.000692735 Jy ! Component: 500 - total flux cleaned = -0.000831753 Jy ! Component: 550 - total flux cleaned = -0.00103305 Jy ! Component: 600 - total flux cleaned = -0.00116245 Jy ! Component: 650 - total flux cleaned = -0.00124605 Jy ! Component: 700 - total flux cleaned = -0.00132774 Jy ! Component: 750 - total flux cleaned = -0.00144676 Jy ! Component: 800 - total flux cleaned = -0.0015435 Jy ! Component: 850 - total flux cleaned = -0.001619 Jy ! Component: 900 - total flux cleaned = -0.00172993 Jy ! Component: 950 - total flux cleaned = -0.00185633 Jy ! Component: 1000 - total flux cleaned = -0.00194445 Jy ! Component: 1050 - total flux cleaned = -0.00203099 Jy ! Component: 1100 - total flux cleaned = -0.00213316 Jy ! Component: 1150 - total flux cleaned = -0.00221706 Jy ! Component: 1200 - total flux cleaned = -0.00238125 Jy ! Component: 1250 - total flux cleaned = -0.00244547 Jy ! Component: 1300 - total flux cleaned = -0.00252469 Jy ! Component: 1350 - total flux cleaned = -0.00263354 Jy ! Component: 1400 - total flux cleaned = -0.00271017 Jy ! Component: 1450 - total flux cleaned = -0.00283065 Jy ! Component: 1500 - total flux cleaned = -0.00294905 Jy ! Component: 1550 - total flux cleaned = -0.00305102 Jy ! Component: 1600 - total flux cleaned = -0.00313716 Jy ! Component: 1650 - total flux cleaned = -0.00322198 Jy ! Component: 1700 - total flux cleaned = -0.00331931 Jy ! Component: 1750 - total flux cleaned = -0.00342935 Jy ! Component: 1800 - total flux cleaned = -0.0035652 Jy ! Component: 1850 - total flux cleaned = -0.00367254 Jy ! Component: 1900 - total flux cleaned = -0.00384506 Jy ! Component: 1950 - total flux cleaned = -0.00395017 Jy ! Component: 2000 - total flux cleaned = -0.00410603 Jy ! Component: 2050 - total flux cleaned = -0.00424757 Jy ! Component: 2100 - total flux cleaned = -0.00437456 Jy ! Component: 2150 - total flux cleaned = -0.00450029 Jy ! Component: 2200 - total flux cleaned = -0.00460004 Jy ! Component: 2250 - total flux cleaned = -0.00473584 Jy ! Component: 2300 - total flux cleaned = -0.00484585 Jy ! Component: 2350 - total flux cleaned = -0.00497919 Jy ! Component: 2400 - total flux cleaned = -0.00507539 Jy ! Component: 2450 - total flux cleaned = -0.00521846 Jy ! Component: 2500 - total flux cleaned = -0.00533689 Jy ! Component: 2550 - total flux cleaned = -0.00540739 Jy ! Component: 2600 - total flux cleaned = -0.00555877 Jy ! Component: 2650 - total flux cleaned = -0.00562821 Jy ! Component: 2700 - total flux cleaned = -0.00570867 Jy ! Component: 2750 - total flux cleaned = -0.00580004 Jy ! Component: 2800 - total flux cleaned = -0.00589076 Jy ! Component: 2850 - total flux cleaned = -0.00598088 Jy ! Component: 2900 - total flux cleaned = -0.0060704 Jy ! Component: 2950 - total flux cleaned = -0.0061372 Jy ! Component: 3000 - total flux cleaned = -0.00624783 Jy ! Component: 3050 - total flux cleaned = -0.00631382 Jy ! Component: 3100 - total flux cleaned = -0.00640133 Jy ! Component: 3150 - total flux cleaned = -0.00648837 Jy ! Component: 3200 - total flux cleaned = -0.00653163 Jy ! Component: 3250 - total flux cleaned = -0.00662842 Jy ! Component: 3300 - total flux cleaned = -0.00669264 Jy ! Component: 3350 - total flux cleaned = -0.00675649 Jy ! Component: 3400 - total flux cleaned = -0.00684122 Jy ! Component: 3450 - total flux cleaned = -0.00690452 Jy ! Component: 3500 - total flux cleaned = -0.00697817 Jy ! Component: 3550 - total flux cleaned = -0.00705146 Jy ! Component: 3600 - total flux cleaned = -0.0071245 Jy ! Component: 3650 - total flux cleaned = -0.00717648 Jy ! Component: 3700 - total flux cleaned = -0.00721791 Jy ! Component: 3750 - total flux cleaned = -0.00726966 Jy ! Component: 3800 - total flux cleaned = -0.00725938 Jy ! Component: 3850 - total flux cleaned = -0.00727992 Jy ! Component: 3900 - total flux cleaned = -0.00729012 Jy ! Component: 3950 - total flux cleaned = -0.00729007 Jy ! Component: 4000 - total flux cleaned = -0.00725937 Jy ! Component: 4050 - total flux cleaned = -0.00725937 Jy ! Total flux subtracted in 4096 components = -0.00722882 Jy ! Clean residual min=-0.000631 max=0.000590 Jy/beam ! Clean residual mean=-0.000006 rms=0.000189 Jy/beam ! Combined flux in latest and established models = 0.148331 Jy keep ! Adding 257 model components to the UV plane model. ! The established model now contains 408 components and 0.148331 Jy ![Exited script file: muppet] wmap "J1209+4119_S_2015_01_22_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.998 x 9.343 at -59.58 degrees (North through East) ! Clean map min=-0.0018678 max=0.13987 Jy/beam ! Writing clean map to FITS file: J1209+4119_S_2015_01_22_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.139875 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000182916 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.392313 0.392313 0.784625 1.56925 3.1385 6.277 12.554 25.108 50.216 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.139 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.998 x 9.343 at -59.58 degrees (North through East) ! Clean map min=-0.0018678 max=0.13987 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1209+4119_S_2015_01_22_pus_uvs.log closed on Tue Jan 3 22:53:07 2017