! Started logfile: J1208+0054_X_2015_01_23_pus_uvs.log on Sun Jan 1 22:16:02 2017 obs J1208+0054_X_2015_01_23_pus_uva.fits ! Reading UV FITS file: J1208+0054_X_2015_01_23_pus_uva.fits ! AN table 1: 143 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.897436 visibilities/baseline/integration-bin. ! Found source: J1208+0054 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.44388e+09 3.2e+07 1 3.2e+07 ! 02 2 8.47588e+09 3.2e+07 1 3.2e+07 ! 03 3 8.50788e+09 3.2e+07 1 3.2e+07 ! 04 4 8.53988e+09 3.2e+07 1 3.2e+07 ! 05 5 8.60388e+09 3.2e+07 1 3.2e+07 ! 06 6 8.63588e+09 3.2e+07 1 3.2e+07 ! 07 7 8.69988e+09 3.2e+07 1 3.2e+07 ! 08 8 8.73188e+09 3.2e+07 1 3.2e+07 ! 09 9 8.79588e+09 3.2e+07 1 3.2e+07 ! 10 10 8.82788e+09 3.2e+07 1 3.2e+07 ! 11 11 8.85988e+09 3.2e+07 1 3.2e+07 ! 12 12 8.89188e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 350 lines of history. ! ! Reading 69300 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J1208+0054_X_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 85 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 85 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 85 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 85 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 85 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 85 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 85 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 85 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 85 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 85 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 85 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 85 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.960016Jy sigma=0.011558 ! Fit after self-cal, rms=0.924624Jy sigma=0.011156 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7069 mas, bmaj=1.826 mas, bpa=-1.997 degrees ! Estimated noise=438.733 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0571459 Jy ! Component: 100 - total flux cleaned = 0.0775579 Jy ! Total flux subtracted in 100 components = 0.0775579 Jy ! Clean residual min=-0.005316 max=0.009420 Jy/beam ! Clean residual mean=0.000005 rms=0.001476 Jy/beam ! Combined flux in latest and established models = 0.0775579 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0775579 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076026Jy sigma=0.000845 ! Fit after self-cal, rms=0.075778Jy sigma=0.000842 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0106649 Jy ! Component: 100 - total flux cleaned = 0.0160708 Jy ! Total flux subtracted in 100 components = 0.0160708 Jy ! Clean residual min=-0.004306 max=0.009801 Jy/beam ! Clean residual mean=0.000017 rms=0.001168 Jy/beam ! Combined flux in latest and established models = 0.0936286 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 15 components and 0.0936286 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073867Jy sigma=0.000819 ! Fit after self-cal, rms=0.073816Jy sigma=0.000818 ! Inverting map ! Added new window around map position (-7, 5.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00860042 Jy ! Component: 100 - total flux cleaned = 0.013107 Jy ! Total flux subtracted in 100 components = 0.013107 Jy ! Clean residual min=-0.003904 max=0.003403 Jy/beam ! Clean residual mean=0.000011 rms=0.000925 Jy/beam ! Combined flux in latest and established models = 0.106736 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 31 components and 0.106736 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.072533Jy sigma=0.000801 ! Fit after self-cal, rms=0.072414Jy sigma=0.000800 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.874 mas, bmaj=2.063 mas, bpa=-2.423 degrees ! Estimated noise=226.315 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00584342 Jy ! Component: 100 - total flux cleaned = 0.00929928 Jy ! Component: 150 - total flux cleaned = 0.0115428 Jy ! Component: 200 - total flux cleaned = 0.0130166 Jy ! Total flux subtracted in 200 components = 0.0130166 Jy ! Clean residual min=-0.004440 max=0.003717 Jy/beam ! Clean residual mean=0.000009 rms=0.000961 Jy/beam ! Combined flux in latest and established models = 0.119752 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 42 components and 0.119752 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.071854Jy sigma=0.000794 ! Fit after self-cal, rms=0.071797Jy sigma=0.000793 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.10 HN 1.10 KP 0.89 ! LA 1.06 MK 0.98 NL 0.99 OV 0.98 ! PT 1.01 SC 0.98 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.13 HN 1.08 KP 0.85 ! LA 1.10 MK 1.00 NL 0.95 OV 0.97 ! PT 0.96 SC 1.06 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.10 HN 1.09 KP 0.81 ! LA 1.11 MK 0.97 NL 0.97 OV 0.97 ! PT 0.94 SC 0.95 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.09 HN 1.07 KP 0.79 ! LA 1.12 MK 0.98 NL 0.96 OV 0.98 ! PT 0.97 SC 1.00 ! ! ! Correcting IF 5. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.13 HN 1.00 KP 0.72 ! LA 1.10 MK 1.01 NL 0.98 OV 1.00 ! PT 0.95 SC 1.08 ! ! ! Correcting IF 6. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.12 HN 1.09 KP 0.72 ! LA 1.12 MK 1.04 NL 1.02 OV 1.03 ! PT 0.97 SC 0.92 ! ! ! Correcting IF 7. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.24 HN 1.18 KP 0.73 ! LA 1.14 MK 1.04 NL 1.05 OV 1.06 ! PT 1.04 SC 0.95 ! ! ! Correcting IF 8. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.14 HN 1.10 KP 0.74 ! LA 1.15 MK 0.98 NL 0.99 OV 1.03 ! PT 0.95 SC 1.02 ! ! ! Correcting IF 9. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.10 HN 1.16 KP 0.78 ! LA 1.15 MK 0.99 NL 1.00 OV 1.03 ! PT 0.98 SC 0.91 ! ! ! Correcting IF 10. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.14 HN 1.12 KP 0.81 ! LA 1.16 MK 1.00 NL 1.02 OV 1.01 ! PT 0.99 SC 0.90 ! ! ! Correcting IF 11. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.20 HN 1.07 KP 0.82 ! LA 1.18 MK 1.04 NL 1.01 OV 1.03 ! PT 1.00 SC 0.92 ! ! ! Correcting IF 12. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.14 HN 1.03 KP 0.80 ! LA 1.13 MK 1.06 NL 1.03 OV 1.02 ! PT 0.98 SC 0.95 ! ! ! Fit before self-cal, rms=0.071797Jy sigma=0.000793 ! Fit after self-cal, rms=0.070585Jy sigma=0.000778 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8745 mas, bmaj=2.048 mas, bpa=-1.801 degrees ! Estimated noise=225.654 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4.8, 4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00254324 Jy ! Component: 100 - total flux cleaned = 0.00313064 Jy ! Component: 150 - total flux cleaned = 0.00355759 Jy ! Component: 200 - total flux cleaned = 0.00378032 Jy ! Total flux subtracted in 200 components = 0.00378032 Jy ! Clean residual min=-0.000882 max=0.000875 Jy/beam ! Clean residual mean=-0.000001 rms=0.000223 Jy/beam ! Combined flux in latest and established models = 0.123533 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 63 components and 0.123533 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070499Jy sigma=0.000777 ! Fit after self-cal, rms=0.070528Jy sigma=0.000776 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070528Jy sigma=0.000776 ! Fit after self-cal, rms=0.071030Jy sigma=0.000776 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.873 mas, bmaj=2.045 mas, bpa=-1.811 degrees ! Estimated noise=225.123 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000780762 Jy ! Component: 100 - total flux cleaned = 0.00101801 Jy ! Component: 150 - total flux cleaned = 0.00112734 Jy ! Component: 200 - total flux cleaned = 0.00123799 Jy ! Total flux subtracted in 200 components = 0.00123799 Jy ! Clean residual min=-0.000747 max=0.000699 Jy/beam ! Clean residual mean=-0.000000 rms=0.000185 Jy/beam ! Combined flux in latest and established models = 0.124771 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 74 components and 0.124771 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.071017Jy sigma=0.000775 ! Fit after self-cal, rms=0.071030Jy sigma=0.000775 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000136106 Jy ! Component: 100 - total flux cleaned = 0.000224186 Jy ! Component: 150 - total flux cleaned = 0.00031532 Jy ! Component: 200 - total flux cleaned = 0.000361794 Jy ! Total flux subtracted in 200 components = 0.000361794 Jy ! Clean residual min=-0.000713 max=0.000671 Jy/beam ! Clean residual mean=-0.000000 rms=0.000181 Jy/beam ! Combined flux in latest and established models = 0.125132 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 82 components and 0.125132 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.071024Jy sigma=0.000775 ! Fit after self-cal, rms=0.071024Jy sigma=0.000775 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.071024Jy sigma=0.000775 ! Fit after self-cal, rms=0.070934Jy sigma=0.000775 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8714 mas, bmaj=2.041 mas, bpa=-1.688 degrees ! Estimated noise=224.648 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000236922 Jy ! Component: 100 - total flux cleaned = 0.000374582 Jy ! Component: 150 - total flux cleaned = 0.000452012 Jy ! Component: 200 - total flux cleaned = 0.000502084 Jy ! Total flux subtracted in 200 components = 0.000502084 Jy ! Clean residual min=-0.000678 max=0.000641 Jy/beam ! Clean residual mean=-0.000000 rms=0.000175 Jy/beam ! Combined flux in latest and established models = 0.125634 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 90 components and 0.125634 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070929Jy sigma=0.000775 ! Fit after self-cal, rms=0.070930Jy sigma=0.000775 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.19325e-05 Jy ! Component: 100 - total flux cleaned = 7.05332e-05 Jy ! Component: 150 - total flux cleaned = 0.000106224 Jy ! Component: 200 - total flux cleaned = 0.000131386 Jy ! Total flux subtracted in 200 components = 0.000131386 Jy ! Clean residual min=-0.000670 max=0.000629 Jy/beam ! Clean residual mean=-0.000000 rms=0.000174 Jy/beam ! Combined flux in latest and established models = 0.125766 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 95 components and 0.125766 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070927Jy sigma=0.000775 ! Fit after self-cal, rms=0.070927Jy sigma=0.000775 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070927Jy sigma=0.000775 ! Fit after self-cal, rms=0.070789Jy sigma=0.000775 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.21 mas, bmaj=3.369 mas, bpa=0.02347 degrees ! Estimated noise=282.647 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000136579 Jy ! Component: 100 - total flux cleaned = 0.000144727 Jy ! Component: 150 - total flux cleaned = 0.000163515 Jy ! Component: 200 - total flux cleaned = 0.000174611 Jy ! Total flux subtracted in 200 components = 0.000174611 Jy ! Clean residual min=-0.000762 max=0.000698 Jy/beam ! Clean residual mean=-0.000002 rms=0.000189 Jy/beam ! Combined flux in latest and established models = 0.12594 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 112 components and 0.12594 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070788Jy sigma=0.000775 ! Fit after self-cal, rms=0.070788Jy sigma=0.000775 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.71744e-05 Jy ! Component: 100 - total flux cleaned = 5.69347e-05 Jy ! Component: 150 - total flux cleaned = 6.61558e-05 Jy ! Component: 200 - total flux cleaned = 7.89922e-05 Jy ! Total flux subtracted in 200 components = 7.89922e-05 Jy ! Clean residual min=-0.000758 max=0.000705 Jy/beam ! Clean residual mean=-0.000002 rms=0.000187 Jy/beam ! Combined flux in latest and established models = 0.126019 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 117 components and 0.126019 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070788Jy sigma=0.000775 ! Fit after self-cal, rms=0.070789Jy sigma=0.000775 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.87 mas, bmaj=2.037 mas, bpa=-1.558 degrees ! Estimated noise=224.223 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.87 x 2.037 at -1.558 degrees (North through East) ! Clean map min=-0.00057411 max=0.073449 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.704 mas, bmaj=1.808 mas, bpa=-1.116 degrees ! Estimated noise=432.169 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0568232 Jy ! Component: 100 - total flux cleaned = 0.0788194 Jy ! Component: 150 - total flux cleaned = 0.09062 Jy ! Component: 200 - total flux cleaned = 0.098212 Jy ! Total flux subtracted in 200 components = 0.098212 Jy ! Clean residual min=-0.002758 max=0.004193 Jy/beam ! Clean residual mean=0.000000 rms=0.000815 Jy/beam ! Combined flux in latest and established models = 0.098212 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.098212 Jy ! Inverting map and beam ! Estimated beam: bmin=0.87 mas, bmaj=2.037 mas, bpa=-1.558 degrees ! Estimated noise=224.223 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00759621 Jy ! Component: 100 - total flux cleaned = 0.0125625 Jy ! Component: 150 - total flux cleaned = 0.0160627 Jy ! Component: 200 - total flux cleaned = 0.0186374 Jy ! Total flux subtracted in 200 components = 0.0186374 Jy ! Clean residual min=-0.001050 max=0.001490 Jy/beam ! Clean residual mean=-0.000001 rms=0.000348 Jy/beam ! Combined flux in latest and established models = 0.116849 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 44 components and 0.116849 Jy ! Inverting map ! Added new window around map position (-0.8, 0.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00196151 Jy ! Component: 100 - total flux cleaned = 0.00348371 Jy ! Component: 150 - total flux cleaned = 0.004684 Jy ! Component: 200 - total flux cleaned = 0.00563603 Jy ! Total flux subtracted in 200 components = 0.00563603 Jy ! Clean residual min=-0.000747 max=0.000749 Jy/beam ! Clean residual mean=-0.000001 rms=0.000205 Jy/beam ! Combined flux in latest and established models = 0.122485 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 67 components and 0.122486 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.21 mas, bmaj=3.369 mas, bpa=0.02347 degrees ! Estimated noise=282.647 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00123402 Jy ! Component: 100 - total flux cleaned = 0.00200464 Jy ! Component: 150 - total flux cleaned = 0.00254181 Jy ! Component: 200 - total flux cleaned = 0.00292528 Jy ! Total flux subtracted in 200 components = 0.00292528 Jy ! Clean residual min=-0.000766 max=0.000635 Jy/beam ! Clean residual mean=-0.000002 rms=0.000188 Jy/beam ! Combined flux in latest and established models = 0.125411 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000281123 Jy ! Component: 100 - total flux cleaned = 0.000413788 Jy ! Component: 150 - total flux cleaned = 0.000488283 Jy ! Component: 200 - total flux cleaned = 0.000527068 Jy ! Total flux subtracted in 200 components = 0.000527068 Jy ! Clean residual min=-0.000725 max=0.000648 Jy/beam ! Clean residual mean=-0.000002 rms=0.000181 Jy/beam ! Combined flux in latest and established models = 0.125938 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 95 components and 0.125938 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.87 mas, bmaj=2.037 mas, bpa=-1.558 degrees ! Estimated noise=224.223 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.74213e-06 Jy ! Component: 100 - total flux cleaned = -1.5401e-05 Jy ! Component: 150 - total flux cleaned = 4.57524e-06 Jy ! Component: 200 - total flux cleaned = 2.30085e-05 Jy ! Total flux subtracted in 200 components = 2.30085e-05 Jy ! Clean residual min=-0.000620 max=0.000618 Jy/beam ! Clean residual mean=-0.000001 rms=0.000164 Jy/beam ! Combined flux in latest and established models = 0.125961 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 109 components and 0.125961 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070781Jy sigma=0.000775 ! Fit after self-cal, rms=0.070778Jy sigma=0.000775 wmodel J1208+0054_X_2015_01_23_pus_map.mod ! Writing 109 model components to file: J1208+0054_X_2015_01_23_pus_map.mod wobs J1208+0054_X_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J1208+0054_X_2015_01_23_pus_uvs.fits wwins J1208+0054_X_2015_01_23_pus_map.win ! wwins: Wrote 4 windows to J1208+0054_X_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -2.12125e-05 Jy ! Component: 100 - total flux cleaned = 1.09363e-05 Jy ! Component: 150 - total flux cleaned = 8.31239e-05 Jy ! Component: 200 - total flux cleaned = 0.000161341 Jy ! Component: 250 - total flux cleaned = 0.000217086 Jy ! Component: 300 - total flux cleaned = 0.000253185 Jy ! Component: 350 - total flux cleaned = 0.000306391 Jy ! Component: 400 - total flux cleaned = 0.000366732 Jy ! Component: 450 - total flux cleaned = 0.000425859 Jy ! Component: 500 - total flux cleaned = 0.000459005 Jy ! Component: 550 - total flux cleaned = 0.000515525 Jy ! Component: 600 - total flux cleaned = 0.000499631 Jy ! Component: 650 - total flux cleaned = 0.000530892 Jy ! Component: 700 - total flux cleaned = 0.000538656 Jy ! Component: 750 - total flux cleaned = 0.000584157 Jy ! Component: 800 - total flux cleaned = 0.000606602 Jy ! Component: 850 - total flux cleaned = 0.000643571 Jy ! Component: 900 - total flux cleaned = 0.000672663 Jy ! Component: 950 - total flux cleaned = 0.000715757 Jy ! Component: 1000 - total flux cleaned = 0.000744049 Jy ! Component: 1050 - total flux cleaned = 0.000765161 Jy ! Component: 1100 - total flux cleaned = 0.000813588 Jy ! Component: 1150 - total flux cleaned = 0.000840939 Jy ! Component: 1200 - total flux cleaned = 0.000895022 Jy ! Component: 1250 - total flux cleaned = 0.000928389 Jy ! Component: 1300 - total flux cleaned = 0.000948234 Jy ! Component: 1350 - total flux cleaned = 0.000961313 Jy ! Component: 1400 - total flux cleaned = 0.000993655 Jy ! Component: 1450 - total flux cleaned = 0.0010065 Jy ! Component: 1500 - total flux cleaned = 0.0010064 Jy ! Component: 1550 - total flux cleaned = 0.00101269 Jy ! Component: 1600 - total flux cleaned = 0.00100025 Jy ! Component: 1650 - total flux cleaned = 0.00101259 Jy ! Component: 1700 - total flux cleaned = 0.00100051 Jy ! Component: 1750 - total flux cleaned = 0.00100661 Jy ! Component: 1800 - total flux cleaned = 0.00101252 Jy ! Component: 1850 - total flux cleaned = 0.00100059 Jy ! Component: 1900 - total flux cleaned = 0.000977251 Jy ! Component: 1950 - total flux cleaned = 0.000959916 Jy ! Component: 2000 - total flux cleaned = 0.000959917 Jy ! Total flux subtracted in 2048 components = 0.000942857 Jy ! Clean residual min=-0.000331 max=0.000291 Jy/beam ! Clean residual mean=-0.000000 rms=0.000107 Jy/beam ! Combined flux in latest and established models = 0.126904 Jy keep ! Adding 141 model components to the UV plane model. ! The established model now contains 250 components and 0.126904 Jy ![Exited script file: muppet] wmap "J1208+0054_X_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.87 x 2.037 at -1.558 degrees (North through East) ! Clean map min=-0.0005303 max=0.073402 Jy/beam ! Writing clean map to FITS file: J1208+0054_X_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0734016 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000106648 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.435881 0.435881 0.871762 1.74352 3.48705 6.9741 13.9482 27.8964 55.7928 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.073 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.87 x 2.037 at -1.558 degrees (North through East) ! Clean map min=-0.0005303 max=0.073402 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1208+0054_X_2015_01_23_pus_uvs.log closed on Sun Jan 1 22:16:07 2017