! Started logfile: J1205-2634_S_2014_08_09_pus_uvs.log on Tue Nov 29 23:04:23 2016 obs J1205-2634_S_2014_08_09_pus_uva.fits ! Reading UV FITS file: J1205-2634_S_2014_08_09_pus_uva.fits ! AN table 1: 57 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.946979 visibilities/baseline/integration-bin. ! Found source: J1205-2634 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 342 lines of history. ! ! Reading 9716 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1205-2634_S_2014_08_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.750840Jy sigma=0.006049 ! Fit after self-cal, rms=0.711397Jy sigma=0.005748 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.562 mas, bmaj=6.401 mas, bpa=-4.294 degrees ! Estimated noise=1227.34 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.226675 Jy ! Component: 100 - total flux cleaned = 0.276773 Jy ! Total flux subtracted in 100 components = 0.276773 Jy ! Clean residual min=-0.010186 max=0.020040 Jy/beam ! Clean residual mean=-0.000064 rms=0.003010 Jy/beam ! Combined flux in latest and established models = 0.276773 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.276773 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123226Jy sigma=0.000930 ! Fit after self-cal, rms=0.123200Jy sigma=0.000930 ! Inverting map ! Added new window around map position (-3, 9). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0205697 Jy ! Component: 100 - total flux cleaned = 0.033326 Jy ! Total flux subtracted in 100 components = 0.033326 Jy ! Clean residual min=-0.009415 max=0.016104 Jy/beam ! Clean residual mean=-0.000059 rms=0.002524 Jy/beam ! Combined flux in latest and established models = 0.310099 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 38 components and 0.310099 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117995Jy sigma=0.000881 ! Fit after self-cal, rms=0.117886Jy sigma=0.000880 ! Inverting map ! Added new window around map position (-16.5, 40.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0148201 Jy ! Component: 100 - total flux cleaned = 0.0238766 Jy ! Total flux subtracted in 100 components = 0.0238766 Jy ! Clean residual min=-0.008741 max=0.011617 Jy/beam ! Clean residual mean=-0.000040 rms=0.002252 Jy/beam ! Combined flux in latest and established models = 0.333975 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 51 components and 0.333975 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115511Jy sigma=0.000858 ! Fit after self-cal, rms=0.115369Jy sigma=0.000857 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.16 mas, bmaj=7.633 mas, bpa=-4.276 degrees ! Estimated noise=895.576 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.012029 Jy ! Component: 100 - total flux cleaned = 0.0202748 Jy ! Component: 150 - total flux cleaned = 0.0262069 Jy ! Component: 200 - total flux cleaned = 0.0305845 Jy ! Total flux subtracted in 200 components = 0.0305845 Jy ! Clean residual min=-0.007603 max=0.010261 Jy/beam ! Clean residual mean=-0.000061 rms=0.002041 Jy/beam ! Combined flux in latest and established models = 0.36456 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 78 components and 0.36456 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113709Jy sigma=0.000844 ! Fit after self-cal, rms=0.113665Jy sigma=0.000844 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.88 HN 1.10 KP 1.04 ! LA 1.08 MK 1.01 NL 0.98 OV 1.00 ! PT 1.00 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.02 HN 1.19 KP 1.01 ! LA 1.03 MK 1.00 NL 1.07 OV 1.02 ! PT 0.97 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.16 HN 1.18 KP 0.87 ! LA 0.83 MK 1.02 NL 1.02 OV 0.96 ! PT 0.96 SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.00 HN 1.09 KP 0.85 ! LA 0.78 MK 1.02 NL 1.11 OV 1.00 ! PT 1.00 SC 0.96 ! ! ! Fit before self-cal, rms=0.113665Jy sigma=0.000844 ! Fit after self-cal, rms=0.108262Jy sigma=0.000792 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.19 mas, bmaj=7.651 mas, bpa=-3.828 degrees ! Estimated noise=894.224 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0026162 Jy ! Component: 100 - total flux cleaned = -0.00305136 Jy ! Component: 150 - total flux cleaned = -0.00340986 Jy ! Component: 200 - total flux cleaned = -0.00359904 Jy ! Total flux subtracted in 200 components = -0.00359904 Jy ! Clean residual min=-0.005590 max=0.006210 Jy/beam ! Clean residual mean=-0.000022 rms=0.001405 Jy/beam ! Combined flux in latest and established models = 0.360961 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 91 components and 0.360961 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108054Jy sigma=0.000791 ! Fit after self-cal, rms=0.108092Jy sigma=0.000790 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108092Jy sigma=0.000790 ! Fit after self-cal, rms=0.112267Jy sigma=0.000779 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.201 mas, bmaj=7.665 mas, bpa=-3.949 degrees ! Estimated noise=894.996 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00201886 Jy ! Component: 100 - total flux cleaned = -0.00235849 Jy ! Component: 150 - total flux cleaned = -0.00246738 Jy ! Component: 200 - total flux cleaned = -0.00257018 Jy ! Total flux subtracted in 200 components = -0.00257018 Jy ! Clean residual min=-0.003574 max=0.004580 Jy/beam ! Clean residual mean=-0.000014 rms=0.001030 Jy/beam ! Combined flux in latest and established models = 0.358391 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 98 components and 0.358391 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112160Jy sigma=0.000779 ! Fit after self-cal, rms=0.112220Jy sigma=0.000778 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-6.5, 32). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00447918 Jy ! Component: 100 - total flux cleaned = 0.00616861 Jy ! Component: 150 - total flux cleaned = 0.00674933 Jy ! Component: 200 - total flux cleaned = 0.00692261 Jy ! Total flux subtracted in 200 components = 0.00692261 Jy ! Clean residual min=-0.003391 max=0.003452 Jy/beam ! Clean residual mean=-0.000001 rms=0.000899 Jy/beam ! Combined flux in latest and established models = 0.365313 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 129 components and 0.365313 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112025Jy sigma=0.000776 ! Fit after self-cal, rms=0.112018Jy sigma=0.000776 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112018Jy sigma=0.000776 ! Fit after self-cal, rms=0.112671Jy sigma=0.000776 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.201 mas, bmaj=7.665 mas, bpa=-3.972 degrees ! Estimated noise=893.243 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000455057 Jy ! Component: 100 - total flux cleaned = 0.00057904 Jy ! Component: 150 - total flux cleaned = 0.000681048 Jy ! Component: 200 - total flux cleaned = 0.000771323 Jy ! Total flux subtracted in 200 components = 0.000771323 Jy ! Clean residual min=-0.003155 max=0.003341 Jy/beam ! Clean residual mean=-0.000002 rms=0.000852 Jy/beam ! Combined flux in latest and established models = 0.366085 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 144 components and 0.366085 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112591Jy sigma=0.000776 ! Fit after self-cal, rms=0.112593Jy sigma=0.000776 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00010683 Jy ! Component: 100 - total flux cleaned = 0.000188681 Jy ! Component: 150 - total flux cleaned = 0.000303247 Jy ! Component: 200 - total flux cleaned = 0.000411244 Jy ! Total flux subtracted in 200 components = 0.000411244 Jy ! Clean residual min=-0.003136 max=0.003269 Jy/beam ! Clean residual mean=-0.000001 rms=0.000843 Jy/beam ! Combined flux in latest and established models = 0.366496 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 154 components and 0.366496 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112558Jy sigma=0.000775 ! Fit after self-cal, rms=0.112553Jy sigma=0.000775 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112553Jy sigma=0.000775 ! Fit after self-cal, rms=0.112809Jy sigma=0.000775 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.03 mas, bmaj=18 mas, bpa=0.5053 degrees ! Estimated noise=1092.24 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000425125 Jy ! Component: 100 - total flux cleaned = 0.000757663 Jy ! Component: 150 - total flux cleaned = 0.000882688 Jy ! Component: 200 - total flux cleaned = 0.00096099 Jy ! Total flux subtracted in 200 components = 0.00096099 Jy ! Clean residual min=-0.004132 max=0.004290 Jy/beam ! Clean residual mean=0.000000 rms=0.001225 Jy/beam ! Combined flux in latest and established models = 0.367457 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 165 components and 0.367457 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112788Jy sigma=0.000775 ! Fit after self-cal, rms=0.112788Jy sigma=0.000775 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000382971 Jy ! Component: 100 - total flux cleaned = 0.000504334 Jy ! Component: 150 - total flux cleaned = 0.000590126 Jy ! Component: 200 - total flux cleaned = 0.000610136 Jy ! Total flux subtracted in 200 components = 0.000610136 Jy ! Clean residual min=-0.004099 max=0.004232 Jy/beam ! Clean residual mean=0.000003 rms=0.001216 Jy/beam ! Combined flux in latest and established models = 0.368067 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 171 components and 0.368067 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112783Jy sigma=0.000775 ! Fit after self-cal, rms=0.112782Jy sigma=0.000775 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.203 mas, bmaj=7.668 mas, bpa=-3.972 degrees ! Estimated noise=892.016 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.203 x 7.668 at -3.972 degrees (North through East) ! Clean map min=-0.002936 max=0.28612 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.582 mas, bmaj=6.383 mas, bpa=-3.9 degrees ! Estimated noise=1236.9 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.228162 Jy ! Component: 100 - total flux cleaned = 0.279002 Jy ! Component: 150 - total flux cleaned = 0.299457 Jy ! Component: 200 - total flux cleaned = 0.312176 Jy ! Total flux subtracted in 200 components = 0.312176 Jy ! Clean residual min=-0.005018 max=0.006932 Jy/beam ! Clean residual mean=-0.000036 rms=0.001411 Jy/beam ! Combined flux in latest and established models = 0.312176 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.312176 Jy ! Inverting map and beam ! Estimated beam: bmin=3.203 mas, bmaj=7.668 mas, bpa=-3.972 degrees ! Estimated noise=892.016 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0128034 Jy ! Component: 100 - total flux cleaned = 0.0216778 Jy ! Component: 150 - total flux cleaned = 0.0283711 Jy ! Component: 200 - total flux cleaned = 0.0335844 Jy ! Total flux subtracted in 200 components = 0.0335844 Jy ! Clean residual min=-0.003649 max=0.004564 Jy/beam ! Clean residual mean=-0.000035 rms=0.001099 Jy/beam ! Combined flux in latest and established models = 0.34576 Jy ! Adding 77 model components to the UV plane model. ! The established model now contains 100 components and 0.345761 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.03 mas, bmaj=18 mas, bpa=0.5053 degrees ! Estimated noise=1092.24 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00681087 Jy ! Component: 100 - total flux cleaned = 0.011453 Jy ! Component: 150 - total flux cleaned = 0.0147242 Jy ! Component: 200 - total flux cleaned = 0.0170656 Jy ! Total flux subtracted in 200 components = 0.0170656 Jy ! Clean residual min=-0.004179 max=0.004499 Jy/beam ! Clean residual mean=-0.000014 rms=0.001279 Jy/beam ! Combined flux in latest and established models = 0.362826 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00168464 Jy ! Component: 100 - total flux cleaned = 0.00290331 Jy ! Component: 150 - total flux cleaned = 0.00375572 Jy ! Component: 200 - total flux cleaned = 0.00398575 Jy ! Total flux subtracted in 200 components = 0.00398575 Jy ! Clean residual min=-0.003978 max=0.004370 Jy/beam ! Clean residual mean=0.000000 rms=0.001217 Jy/beam ! Combined flux in latest and established models = 0.366812 Jy ! Adding 61 model components to the UV plane model. ! The established model now contains 148 components and 0.366812 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.203 mas, bmaj=7.668 mas, bpa=-3.972 degrees ! Estimated noise=892.016 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000503632 Jy ! Component: 100 - total flux cleaned = -0.000454676 Jy ! Component: 150 - total flux cleaned = -0.000363937 Jy ! Component: 200 - total flux cleaned = -0.000284841 Jy ! Total flux subtracted in 200 components = -0.000284841 Jy ! Clean residual min=-0.002856 max=0.003205 Jy/beam ! Clean residual mean=0.000000 rms=0.000812 Jy/beam ! Combined flux in latest and established models = 0.366527 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 164 components and 0.366527 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112719Jy sigma=0.000775 ! Fit after self-cal, rms=0.112699Jy sigma=0.000775 wmodel J1205-2634_S_2014_08_09_pus_map.mod ! Writing 164 model components to file: J1205-2634_S_2014_08_09_pus_map.mod wobs J1205-2634_S_2014_08_09_pus_uvs.fits ! Writing UV FITS file: J1205-2634_S_2014_08_09_pus_uvs.fits wwins J1205-2634_S_2014_08_09_pus_map.win ! wwins: Wrote 4 windows to J1205-2634_S_2014_08_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00114657 Jy ! Component: 100 - total flux cleaned = 0.00186971 Jy ! Component: 150 - total flux cleaned = 0.00254985 Jy ! Component: 200 - total flux cleaned = 0.00301719 Jy ! Component: 250 - total flux cleaned = 0.00324307 Jy ! Component: 300 - total flux cleaned = 0.00341706 Jy ! Component: 350 - total flux cleaned = 0.00354432 Jy ! Component: 400 - total flux cleaned = 0.0037507 Jy ! Component: 450 - total flux cleaned = 0.00391228 Jy ! Component: 500 - total flux cleaned = 0.00410911 Jy ! Component: 550 - total flux cleaned = 0.00430095 Jy ! Component: 600 - total flux cleaned = 0.00445108 Jy ! Component: 650 - total flux cleaned = 0.00448821 Jy ! Component: 700 - total flux cleaned = 0.00456092 Jy ! Component: 750 - total flux cleaned = 0.00463175 Jy ! Component: 800 - total flux cleaned = 0.00466643 Jy ! Component: 850 - total flux cleaned = 0.00473558 Jy ! Component: 900 - total flux cleaned = 0.00463535 Jy ! Component: 950 - total flux cleaned = 0.00476864 Jy ! Component: 1000 - total flux cleaned = 0.0048666 Jy ! Component: 1050 - total flux cleaned = 0.00486694 Jy ! Component: 1100 - total flux cleaned = 0.00496207 Jy ! Component: 1150 - total flux cleaned = 0.00496143 Jy ! Component: 1200 - total flux cleaned = 0.00496125 Jy ! Component: 1250 - total flux cleaned = 0.00493075 Jy ! Component: 1300 - total flux cleaned = 0.00493039 Jy ! Component: 1350 - total flux cleaned = 0.00496016 Jy ! Component: 1400 - total flux cleaned = 0.00498934 Jy ! Component: 1450 - total flux cleaned = 0.00496025 Jy ! Component: 1500 - total flux cleaned = 0.00504636 Jy ! Component: 1550 - total flux cleaned = 0.00504664 Jy ! Component: 1600 - total flux cleaned = 0.00507479 Jy ! Component: 1650 - total flux cleaned = 0.00515746 Jy ! Component: 1700 - total flux cleaned = 0.00515749 Jy ! Component: 1750 - total flux cleaned = 0.00513058 Jy ! Component: 1800 - total flux cleaned = 0.00518432 Jy ! Component: 1850 - total flux cleaned = 0.00515745 Jy ! Component: 1900 - total flux cleaned = 0.00521069 Jy ! Component: 1950 - total flux cleaned = 0.00534088 Jy ! Component: 2000 - total flux cleaned = 0.00528906 Jy ! Component: 2050 - total flux cleaned = 0.00536595 Jy ! Component: 2100 - total flux cleaned = 0.0053913 Jy ! Component: 2150 - total flux cleaned = 0.00549171 Jy ! Component: 2200 - total flux cleaned = 0.00551676 Jy ! Component: 2250 - total flux cleaned = 0.00559093 Jy ! Component: 2300 - total flux cleaned = 0.00564006 Jy ! Component: 2350 - total flux cleaned = 0.00583338 Jy ! Component: 2400 - total flux cleaned = 0.00580937 Jy ! Component: 2450 - total flux cleaned = 0.00599935 Jy ! Component: 2500 - total flux cleaned = 0.00599938 Jy ! Component: 2550 - total flux cleaned = 0.00620967 Jy ! Component: 2600 - total flux cleaned = 0.00623264 Jy ! Component: 2650 - total flux cleaned = 0.00634773 Jy ! Component: 2700 - total flux cleaned = 0.0065301 Jy ! Component: 2750 - total flux cleaned = 0.00668823 Jy ! Component: 2800 - total flux cleaned = 0.00673301 Jy ! Component: 2850 - total flux cleaned = 0.00688871 Jy ! Component: 2900 - total flux cleaned = 0.00697689 Jy ! Component: 2950 - total flux cleaned = 0.00708622 Jy ! Component: 3000 - total flux cleaned = 0.00721699 Jy ! Component: 3050 - total flux cleaned = 0.00717369 Jy ! Component: 3100 - total flux cleaned = 0.0073238 Jy ! Component: 3150 - total flux cleaned = 0.00730261 Jy ! Component: 3200 - total flux cleaned = 0.00751387 Jy ! Component: 3250 - total flux cleaned = 0.00749291 Jy ! Component: 3300 - total flux cleaned = 0.00763892 Jy ! Component: 3350 - total flux cleaned = 0.00772138 Jy ! Component: 3400 - total flux cleaned = 0.00776231 Jy ! Component: 3450 - total flux cleaned = 0.00788466 Jy ! Component: 3500 - total flux cleaned = 0.00794539 Jy ! Component: 3550 - total flux cleaned = 0.00804609 Jy ! Component: 3600 - total flux cleaned = 0.00816615 Jy ! Component: 3650 - total flux cleaned = 0.00822576 Jy ! Component: 3700 - total flux cleaned = 0.00834401 Jy ! Component: 3750 - total flux cleaned = 0.00848117 Jy ! Component: 3800 - total flux cleaned = 0.00863683 Jy ! Component: 3850 - total flux cleaned = 0.00865593 Jy ! Component: 3900 - total flux cleaned = 0.00877132 Jy ! Component: 3950 - total flux cleaned = 0.00890509 Jy ! Component: 4000 - total flux cleaned = 0.00905703 Jy ! Component: 4050 - total flux cleaned = 0.0091513 Jy ! Total flux subtracted in 4096 components = 0.0092824 Jy ! Clean residual min=-0.001202 max=0.001349 Jy/beam ! Clean residual mean=0.000004 rms=0.000355 Jy/beam ! Combined flux in latest and established models = 0.375809 Jy keep ! Adding 313 model components to the UV plane model. ! The established model now contains 477 components and 0.375809 Jy ![Exited script file: muppet] wmap "J1205-2634_S_2014_08_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.203 x 7.668 at -3.972 degrees (North through East) ! Clean map min=-0.0020711 max=0.28718 Jy/beam ! Writing clean map to FITS file: J1205-2634_S_2014_08_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.287183 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000349238 device "J1205-2634_S_2014_08_09_pus\_map.eps/VPS" ! Attempting to open device: 'J1205-2634_S_2014_08_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.364825 0.364825 0.729649 1.4593 2.9186 5.83719 11.6744 23.3488 46.6976 93.3951 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.287 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.203 x 7.668 at -3.972 degrees (North through East) ! Clean map min=-0.0020711 max=0.28718 Jy/beam quit ! Quitting program ! Log file J1205-2634_S_2014_08_09_pus_uvs.log closed on Tue Nov 29 23:04:28 2016