! Started logfile: J1203+4803_S_2015_01_22_pus_uvs.log on Tue Jan 3 22:52:54 2017 obs J1203+4803_S_2015_01_22_pus_uva.fits ! Reading UV FITS file: J1203+4803_S_2015_01_22_pus_uva.fits ! AN table 1: 29 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.8 visibilities/baseline/integration-bin. ! Found source: J1203+4803 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 281 lines of history. ! ! Reading 4176 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1203+4803_S_2015_01_22_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.729347Jy sigma=0.008642 ! Fit after self-cal, rms=0.722474Jy sigma=0.008578 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.6 mas, bmaj=9.744 mas, bpa=-49.54 degrees ! Estimated noise=1440.5 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.215176 Jy ! Component: 100 - total flux cleaned = 0.262318 Jy ! Total flux subtracted in 100 components = 0.262318 Jy ! Clean residual min=-0.010969 max=0.014520 Jy/beam ! Clean residual mean=0.000029 rms=0.002837 Jy/beam ! Combined flux in latest and established models = 0.262318 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.262318 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085065Jy sigma=0.000907 ! Fit after self-cal, rms=0.085063Jy sigma=0.000907 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.15 mas, bmaj=10.05 mas, bpa=-51.49 degrees ! Estimated noise=943.099 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0189687 Jy ! Component: 100 - total flux cleaned = 0.0282849 Jy ! Component: 150 - total flux cleaned = 0.0350141 Jy ! Component: 200 - total flux cleaned = 0.0401207 Jy ! Total flux subtracted in 200 components = 0.0401207 Jy ! Clean residual min=-0.008279 max=0.010024 Jy/beam ! Clean residual mean=0.000029 rms=0.002109 Jy/beam ! Combined flux in latest and established models = 0.302439 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 39 components and 0.302439 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080170Jy sigma=0.000857 ! Fit after self-cal, rms=0.080154Jy sigma=0.000857 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00* HN 1.00 KP 1.12 ! LA 0.99 MK 1.02 NL 0.97 OV 0.99 ! PT 1.04 SC 1.05 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00* HN 1.05 KP 1.01 ! LA 0.99 MK 1.01 NL 0.94 OV 1.00 ! PT 1.06 SC 1.12 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.00* HN 1.01 KP 0.89 ! LA 0.80 MK 1.01 NL 1.10 OV 0.93 ! PT 1.04 SC 1.14 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.00* HN 0.97 KP 0.80 ! LA 0.87 MK 1.00 NL 1.04 OV 0.94 ! PT 1.06 SC 1.05 ! ! ! Fit before self-cal, rms=0.080154Jy sigma=0.000857 ! Fit after self-cal, rms=0.072332Jy sigma=0.000778 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.181 mas, bmaj=10.07 mas, bpa=-51.68 degrees ! Estimated noise=938.421 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000223238 Jy ! Component: 100 - total flux cleaned = -0.000510467 Jy ! Component: 150 - total flux cleaned = -0.000922949 Jy ! Component: 200 - total flux cleaned = -0.00136083 Jy ! Total flux subtracted in 200 components = -0.00136083 Jy ! Clean residual min=-0.002870 max=0.003129 Jy/beam ! Clean residual mean=0.000005 rms=0.000756 Jy/beam ! Combined flux in latest and established models = 0.301078 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 55 components and 0.301078 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072194Jy sigma=0.000776 ! Fit after self-cal, rms=0.072194Jy sigma=0.000776 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072194Jy sigma=0.000776 ! Fit after self-cal, rms=0.072460Jy sigma=0.000775 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.185 mas, bmaj=10.06 mas, bpa=-51.71 degrees ! Estimated noise=938.501 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000531115 Jy ! Component: 100 - total flux cleaned = -0.000878988 Jy ! Component: 150 - total flux cleaned = -0.00112623 Jy ! Component: 200 - total flux cleaned = -0.00143231 Jy ! Total flux subtracted in 200 components = -0.00143231 Jy ! Clean residual min=-0.002642 max=0.002962 Jy/beam ! Clean residual mean=0.000007 rms=0.000694 Jy/beam ! Combined flux in latest and established models = 0.299646 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 66 components and 0.299646 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072415Jy sigma=0.000775 ! Fit after self-cal, rms=0.072418Jy sigma=0.000775 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (123, 97.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00248915 Jy ! Component: 100 - total flux cleaned = 0.00327089 Jy ! Component: 150 - total flux cleaned = 0.00338791 Jy ! Component: 200 - total flux cleaned = 0.00349181 Jy ! Total flux subtracted in 200 components = 0.00349181 Jy ! Clean residual min=-0.002375 max=0.002702 Jy/beam ! Clean residual mean=0.000001 rms=0.000622 Jy/beam ! Combined flux in latest and established models = 0.303138 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 88 components and 0.303138 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072325Jy sigma=0.000774 ! Fit after self-cal, rms=0.072319Jy sigma=0.000774 ! Inverting map ! Added new window around map position (124, -44). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00178887 Jy ! Component: 100 - total flux cleaned = 0.00183706 Jy ! Component: 150 - total flux cleaned = 0.00188347 Jy ! Component: 200 - total flux cleaned = 0.00192566 Jy ! Total flux subtracted in 200 components = 0.00192566 Jy ! Clean residual min=-0.002211 max=0.002324 Jy/beam ! Clean residual mean=0.000000 rms=0.000532 Jy/beam ! Combined flux in latest and established models = 0.305063 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 113 components and 0.305063 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072229Jy sigma=0.000772 ! Fit after self-cal, rms=0.072226Jy sigma=0.000772 ! Inverting map ! Added new window around map position (-93, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000999484 Jy ! Component: 100 - total flux cleaned = 0.000665659 Jy ! Component: 150 - total flux cleaned = 0.000705515 Jy ! Component: 200 - total flux cleaned = 0.000743789 Jy ! Total flux subtracted in 200 components = 0.000743789 Jy ! Clean residual min=-0.002163 max=0.001659 Jy/beam ! Clean residual mean=-0.000001 rms=0.000468 Jy/beam ! Combined flux in latest and established models = 0.305807 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 138 components and 0.305807 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072150Jy sigma=0.000771 ! Fit after self-cal, rms=0.072148Jy sigma=0.000771 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072148Jy sigma=0.000771 ! Fit after self-cal, rms=0.072158Jy sigma=0.000771 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.187 mas, bmaj=10.06 mas, bpa=-51.72 degrees ! Estimated noise=936.519 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00031108 Jy ! Component: 100 - total flux cleaned = 0.000387932 Jy ! Component: 150 - total flux cleaned = 0.000493185 Jy ! Component: 200 - total flux cleaned = 0.000592043 Jy ! Total flux subtracted in 200 components = 0.000592043 Jy ! Clean residual min=-0.001990 max=0.001552 Jy/beam ! Clean residual mean=-0.000001 rms=0.000428 Jy/beam ! Combined flux in latest and established models = 0.306399 Jy selfcal ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 157 components and 0.306399 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072124Jy sigma=0.000771 ! Fit after self-cal, rms=0.072126Jy sigma=0.000771 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.58153e-05 Jy ! Component: 100 - total flux cleaned = 0.000127422 Jy ! Component: 150 - total flux cleaned = 0.000157199 Jy ! Component: 200 - total flux cleaned = 0.000268849 Jy ! Total flux subtracted in 200 components = 0.000268849 Jy ! Clean residual min=-0.001872 max=0.001473 Jy/beam ! Clean residual mean=-0.000001 rms=0.000413 Jy/beam ! Combined flux in latest and established models = 0.306668 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 169 components and 0.306668 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072103Jy sigma=0.000771 ! Fit after self-cal, rms=0.072102Jy sigma=0.000771 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072102Jy sigma=0.000771 ! Fit after self-cal, rms=0.072080Jy sigma=0.000771 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.074 mas, bmaj=10.65 mas, bpa=-61.14 degrees ! Estimated noise=1143.09 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.31976e-05 Jy ! Component: 100 - total flux cleaned = 8.65257e-05 Jy ! Component: 150 - total flux cleaned = 2.39118e-05 Jy ! Component: 200 - total flux cleaned = -3.32352e-05 Jy ! Total flux subtracted in 200 components = -3.32352e-05 Jy ! Clean residual min=-0.001552 max=0.001375 Jy/beam ! Clean residual mean=0.000001 rms=0.000443 Jy/beam ! Combined flux in latest and established models = 0.306635 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 195 components and 0.306635 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072069Jy sigma=0.000770 ! Fit after self-cal, rms=0.072069Jy sigma=0.000770 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000106116 Jy ! Component: 100 - total flux cleaned = 3.55834e-05 Jy ! Component: 150 - total flux cleaned = -3.14846e-05 Jy ! Component: 200 - total flux cleaned = -6.32416e-05 Jy ! Total flux subtracted in 200 components = -6.32416e-05 Jy ! Clean residual min=-0.001544 max=0.001343 Jy/beam ! Clean residual mean=0.000001 rms=0.000431 Jy/beam ! Combined flux in latest and established models = 0.306571 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 211 components and 0.306571 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072063Jy sigma=0.000770 ! Fit after self-cal, rms=0.072062Jy sigma=0.000770 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.186 mas, bmaj=10.06 mas, bpa=-51.72 degrees ! Estimated noise=935.888 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.186 x 10.06 at -51.72 degrees (North through East) ! Clean map min=-0.0016406 max=0.27769 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.62 mas, bmaj=9.717 mas, bpa=-49.76 degrees ! Estimated noise=1443.32 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.215579 Jy ! Component: 100 - total flux cleaned = 0.262637 Jy ! Component: 150 - total flux cleaned = 0.276653 Jy ! Component: 200 - total flux cleaned = 0.283772 Jy ! Total flux subtracted in 200 components = 0.283772 Jy ! Clean residual min=-0.004284 max=0.004485 Jy/beam ! Clean residual mean=0.000014 rms=0.001237 Jy/beam ! Combined flux in latest and established models = 0.283772 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.283772 Jy ! Inverting map and beam ! Estimated beam: bmin=3.186 mas, bmaj=10.06 mas, bpa=-51.72 degrees ! Estimated noise=935.888 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (42, -6.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00613676 Jy ! Component: 100 - total flux cleaned = 0.0100872 Jy ! Component: 150 - total flux cleaned = 0.0130663 Jy ! Component: 200 - total flux cleaned = 0.0154419 Jy ! Total flux subtracted in 200 components = 0.0154419 Jy ! Clean residual min=-0.002869 max=0.002119 Jy/beam ! Clean residual mean=0.000012 rms=0.000631 Jy/beam ! Combined flux in latest and established models = 0.299214 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 58 components and 0.299214 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.074 mas, bmaj=10.65 mas, bpa=-61.14 degrees ! Estimated noise=1143.09 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00196983 Jy ! Component: 100 - total flux cleaned = 0.00299874 Jy ! Component: 150 - total flux cleaned = 0.0036306 Jy ! Component: 200 - total flux cleaned = 0.00425837 Jy ! Total flux subtracted in 200 components = 0.00425837 Jy ! Clean residual min=-0.002045 max=0.001762 Jy/beam ! Clean residual mean=0.000011 rms=0.000576 Jy/beam ! Combined flux in latest and established models = 0.303472 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000493014 Jy ! Component: 100 - total flux cleaned = 0.00071072 Jy ! Component: 150 - total flux cleaned = 0.000910911 Jy ! Component: 200 - total flux cleaned = 0.00109679 Jy ! Total flux subtracted in 200 components = 0.00109679 Jy ! Clean residual min=-0.001836 max=0.001721 Jy/beam ! Clean residual mean=0.000009 rms=0.000527 Jy/beam ! Combined flux in latest and established models = 0.304569 Jy ! Adding 75 model components to the UV plane model. ! The established model now contains 130 components and 0.304569 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.186 mas, bmaj=10.06 mas, bpa=-51.72 degrees ! Estimated noise=935.888 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000828364 Jy ! Component: 100 - total flux cleaned = 0.000885869 Jy ! Component: 150 - total flux cleaned = 0.000839516 Jy ! Component: 200 - total flux cleaned = 0.000797498 Jy ! Total flux subtracted in 200 components = 0.000797498 Jy ! Clean residual min=-0.001810 max=0.001628 Jy/beam ! Clean residual mean=0.000002 rms=0.000452 Jy/beam ! Combined flux in latest and established models = 0.305367 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 159 components and 0.305367 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072162Jy sigma=0.000772 ! Fit after self-cal, rms=0.072153Jy sigma=0.000771 wmodel J1203+4803_S_2015_01_22_pus_map.mod ! Writing 159 model components to file: J1203+4803_S_2015_01_22_pus_map.mod wobs J1203+4803_S_2015_01_22_pus_uvs.fits ! Writing UV FITS file: J1203+4803_S_2015_01_22_pus_uvs.fits wwins J1203+4803_S_2015_01_22_pus_map.win ! wwins: Wrote 5 windows to J1203+4803_S_2015_01_22_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000781621 Jy ! Component: 100 - total flux cleaned = -0.00113019 Jy ! Component: 150 - total flux cleaned = -0.001212 Jy ! Component: 200 - total flux cleaned = -0.00118648 Jy ! Component: 250 - total flux cleaned = -0.00111244 Jy ! Component: 300 - total flux cleaned = -0.000992881 Jy ! Component: 350 - total flux cleaned = -0.000807951 Jy ! Component: 400 - total flux cleaned = -0.000696372 Jy ! Component: 450 - total flux cleaned = -0.000588109 Jy ! Component: 500 - total flux cleaned = -0.000504043 Jy ! Component: 550 - total flux cleaned = -0.000442108 Jy ! Component: 600 - total flux cleaned = -0.000381534 Jy ! Component: 650 - total flux cleaned = -0.000322476 Jy ! Component: 700 - total flux cleaned = -0.00026519 Jy ! Component: 750 - total flux cleaned = -0.000265138 Jy ! Component: 800 - total flux cleaned = -0.000265239 Jy ! Component: 850 - total flux cleaned = -0.000247428 Jy ! Component: 900 - total flux cleaned = -0.000318263 Jy ! Component: 950 - total flux cleaned = -0.000317796 Jy ! Component: 1000 - total flux cleaned = -0.000351994 Jy ! Component: 1050 - total flux cleaned = -0.000402111 Jy ! Component: 1100 - total flux cleaned = -0.000385734 Jy ! Component: 1150 - total flux cleaned = -0.000450996 Jy ! Component: 1200 - total flux cleaned = -0.000483363 Jy ! Component: 1250 - total flux cleaned = -0.000547007 Jy ! Component: 1300 - total flux cleaned = -0.00056261 Jy ! Component: 1350 - total flux cleaned = -0.000562793 Jy ! Component: 1400 - total flux cleaned = -0.000593538 Jy ! Component: 1450 - total flux cleaned = -0.00063897 Jy ! Component: 1500 - total flux cleaned = -0.000638809 Jy ! Component: 1550 - total flux cleaned = -0.000668352 Jy ! Component: 1600 - total flux cleaned = -0.000639014 Jy ! Component: 1650 - total flux cleaned = -0.000653557 Jy ! Component: 1700 - total flux cleaned = -0.000653551 Jy ! Component: 1750 - total flux cleaned = -0.000625092 Jy ! Component: 1800 - total flux cleaned = -0.000625215 Jy ! Component: 1850 - total flux cleaned = -0.000625253 Jy ! Component: 1900 - total flux cleaned = -0.000597504 Jy ! Component: 1950 - total flux cleaned = -0.000597524 Jy ! Component: 2000 - total flux cleaned = -0.000556678 Jy ! Component: 2050 - total flux cleaned = -0.000516192 Jy ! Component: 2100 - total flux cleaned = -0.000529646 Jy ! Component: 2150 - total flux cleaned = -0.000516231 Jy ! Component: 2200 - total flux cleaned = -0.000489676 Jy ! Component: 2250 - total flux cleaned = -0.000450288 Jy ! Component: 2300 - total flux cleaned = -0.000450312 Jy ! Component: 2350 - total flux cleaned = -0.000424357 Jy ! Component: 2400 - total flux cleaned = -0.000424395 Jy ! Component: 2450 - total flux cleaned = -0.000398706 Jy ! Component: 2500 - total flux cleaned = -0.000360467 Jy ! Component: 2550 - total flux cleaned = -0.000347728 Jy ! Component: 2600 - total flux cleaned = -0.00031001 Jy ! Component: 2650 - total flux cleaned = -0.000310057 Jy ! Component: 2700 - total flux cleaned = -0.00027264 Jy ! Component: 2750 - total flux cleaned = -0.000272715 Jy ! Component: 2800 - total flux cleaned = -0.00026035 Jy ! Component: 2850 - total flux cleaned = -0.000260353 Jy ! Component: 2900 - total flux cleaned = -0.000248086 Jy ! Component: 2950 - total flux cleaned = -0.000248147 Jy ! Component: 3000 - total flux cleaned = -0.000296613 Jy ! Component: 3050 - total flux cleaned = -0.000284523 Jy ! Component: 3100 - total flux cleaned = -0.000332535 Jy ! Component: 3150 - total flux cleaned = -0.000332571 Jy ! Component: 3200 - total flux cleaned = -0.000320657 Jy ! Component: 3250 - total flux cleaned = -0.000320703 Jy ! Component: 3300 - total flux cleaned = -0.000356334 Jy ! Component: 3350 - total flux cleaned = -0.000368151 Jy ! Component: 3400 - total flux cleaned = -0.000368229 Jy ! Component: 3450 - total flux cleaned = -0.000368254 Jy ! Component: 3500 - total flux cleaned = -0.00037994 Jy ! Component: 3550 - total flux cleaned = -0.000403281 Jy ! Component: 3600 - total flux cleaned = -0.000379951 Jy ! Component: 3650 - total flux cleaned = -0.000403171 Jy ! Component: 3700 - total flux cleaned = -0.000356861 Jy ! Component: 3750 - total flux cleaned = -0.000414691 Jy ! Component: 3800 - total flux cleaned = -0.00039165 Jy ! Component: 3850 - total flux cleaned = -0.000426207 Jy ! Component: 3900 - total flux cleaned = -0.000414684 Jy ! Component: 3950 - total flux cleaned = -0.000403191 Jy ! Component: 4000 - total flux cleaned = -0.000448936 Jy ! Component: 4050 - total flux cleaned = -0.000437465 Jy ! Total flux subtracted in 4096 components = -0.000403285 Jy ! Clean residual min=-0.000756 max=0.000636 Jy/beam ! Clean residual mean=0.000001 rms=0.000203 Jy/beam ! Combined flux in latest and established models = 0.304963 Jy keep ! Adding 240 model components to the UV plane model. ! The established model now contains 399 components and 0.304963 Jy ![Exited script file: muppet] wmap "J1203+4803_S_2015_01_22_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.186 x 10.06 at -51.72 degrees (North through East) ! Clean map min=-0.0018877 max=0.27671 Jy/beam ! Writing clean map to FITS file: J1203+4803_S_2015_01_22_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.276711 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000216655 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.23489 0.23489 0.469779 0.939559 1.87912 3.75823 7.51647 15.0329 30.0659 60.1317 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.276 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.186 x 10.06 at -51.72 degrees (North through East) ! Clean map min=-0.0018877 max=0.27671 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1203+4803_S_2015_01_22_pus_uvs.log closed on Tue Jan 3 22:53:01 2017