! Started logfile: J1155-3107_S_2014_08_09_pus_uvs.log on Tue Nov 29 23:04:09 2016 obs J1155-3107_S_2014_08_09_pus_uva.fits ! Reading UV FITS file: J1155-3107_S_2014_08_09_pus_uva.fits ! AN table 1: 71 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.589045 visibilities/baseline/integration-bin. ! Found source: J1155-3107 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 342 lines of history. ! ! Reading 7528 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1155-3107_S_2014_08_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 300 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 296 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 298 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 297 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.918638Jy sigma=0.007287 ! Fit after self-cal, rms=0.887830Jy sigma=0.007073 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.424 mas, bmaj=7.47 mas, bpa=-2.666 degrees ! Estimated noise=3484.21 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.101893 Jy ! Component: 100 - total flux cleaned = 0.125723 Jy ! Total flux subtracted in 100 components = 0.125723 Jy ! Clean residual min=-0.012962 max=0.016550 Jy/beam ! Clean residual mean=0.000014 rms=0.003384 Jy/beam ! Combined flux in latest and established models = 0.125723 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.125723 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107695Jy sigma=0.000787 ! Fit after self-cal, rms=0.107670Jy sigma=0.000786 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.98 mas, bmaj=8.251 mas, bpa=-3.306 degrees ! Estimated noise=1065 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000204508 Jy ! Component: 100 - total flux cleaned = 0.000129067 Jy ! Component: 150 - total flux cleaned = 0.000446882 Jy ! Component: 200 - total flux cleaned = 0.000749518 Jy ! Total flux subtracted in 200 components = 0.000749518 Jy ! Clean residual min=-0.004798 max=0.007329 Jy/beam ! Clean residual mean=0.000021 rms=0.001343 Jy/beam ! Combined flux in latest and established models = 0.126473 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 18 components and 0.126473 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107429Jy sigma=0.000785 ! Fit after self-cal, rms=0.107434Jy sigma=0.000785 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.82 HN 1.33 KP 1.07 ! LA 1.05 MK 1.01 NL 1.00 OV 1.01 ! PT 1.04 SC 0.98 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.01 HN 1.65 KP 0.98 ! LA 1.02 MK 1.01 NL 1.14 OV 0.99 ! PT 0.97 SC 0.98 ! ! ! Correcting IF 3. ! A total of 15 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.10 HN 1.43 KP 0.88 ! LA 0.85 MK 1.01 NL 1.03 OV 0.93 ! PT 0.96 SC 1.01 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.01 HN 1.38 KP 0.83 ! LA 0.77 MK 0.98 NL 1.24 OV 0.96 ! PT 1.03 SC 0.94 ! ! ! Fit before self-cal, rms=0.107434Jy sigma=0.000785 ! Fit after self-cal, rms=0.119823Jy sigma=0.000770 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.006 mas, bmaj=8.162 mas, bpa=-2.807 degrees ! Estimated noise=1085.63 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.08228e-05 Jy ! Component: 100 - total flux cleaned = -3.44585e-06 Jy ! Component: 150 - total flux cleaned = -2.91629e-05 Jy ! Component: 200 - total flux cleaned = -5.38007e-05 Jy ! Total flux subtracted in 200 components = -5.38007e-05 Jy ! Clean residual min=-0.002861 max=0.003006 Jy/beam ! Clean residual mean=0.000017 rms=0.000706 Jy/beam ! Combined flux in latest and established models = 0.126419 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 27 components and 0.126419 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119804Jy sigma=0.000770 ! Fit after self-cal, rms=0.120135Jy sigma=0.000770 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120135Jy sigma=0.000770 ! Fit after self-cal, rms=0.122146Jy sigma=0.000770 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.005 mas, bmaj=8.152 mas, bpa=-2.815 degrees ! Estimated noise=1087.85 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000237785 Jy ! Component: 100 - total flux cleaned = 0.000263077 Jy ! Component: 150 - total flux cleaned = 0.000264135 Jy ! Component: 200 - total flux cleaned = 0.000263437 Jy ! Total flux subtracted in 200 components = 0.000263437 Jy ! Clean residual min=-0.002827 max=0.002993 Jy/beam ! Clean residual mean=0.000016 rms=0.000697 Jy/beam ! Combined flux in latest and established models = 0.126683 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 31 components and 0.126683 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122133Jy sigma=0.000769 ! Fit after self-cal, rms=0.122155Jy sigma=0.000769 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-30.5, 6.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00181968 Jy ! Component: 100 - total flux cleaned = 0.00217277 Jy ! Component: 150 - total flux cleaned = 0.00217672 Jy ! Component: 200 - total flux cleaned = 0.00210215 Jy ! Total flux subtracted in 200 components = 0.00210215 Jy ! Clean residual min=-0.002723 max=0.002746 Jy/beam ! Clean residual mean=0.000018 rms=0.000637 Jy/beam ! Combined flux in latest and established models = 0.128785 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 51 components and 0.128785 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122072Jy sigma=0.000769 ! Fit after self-cal, rms=0.122061Jy sigma=0.000769 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122061Jy sigma=0.000769 ! Fit after self-cal, rms=0.121868Jy sigma=0.000767 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.004 mas, bmaj=8.157 mas, bpa=-2.843 degrees ! Estimated noise=1084.07 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000421076 Jy ! Component: 100 - total flux cleaned = 0.000382044 Jy ! Component: 150 - total flux cleaned = 0.000348028 Jy ! Component: 200 - total flux cleaned = 0.0002578 Jy ! Total flux subtracted in 200 components = 0.0002578 Jy ! Clean residual min=-0.002681 max=0.002651 Jy/beam ! Clean residual mean=0.000015 rms=0.000614 Jy/beam ! Combined flux in latest and established models = 0.129042 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 62 components and 0.129043 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121840Jy sigma=0.000767 ! Fit after self-cal, rms=0.121849Jy sigma=0.000767 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.50613e-05 Jy ! Component: 100 - total flux cleaned = 3.67322e-05 Jy ! Component: 150 - total flux cleaned = 3.61459e-05 Jy ! Component: 200 - total flux cleaned = -1.56231e-05 Jy ! Total flux subtracted in 200 components = -1.56231e-05 Jy ! Clean residual min=-0.002650 max=0.002614 Jy/beam ! Clean residual mean=0.000015 rms=0.000605 Jy/beam ! Combined flux in latest and established models = 0.129027 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 68 components and 0.129027 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121832Jy sigma=0.000767 ! Fit after self-cal, rms=0.121831Jy sigma=0.000767 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121831Jy sigma=0.000767 ! Fit after self-cal, rms=0.122153Jy sigma=0.000767 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.194 mas, bmaj=22.88 mas, bpa=2.203 degrees ! Estimated noise=1321.28 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000128309 Jy ! Component: 100 - total flux cleaned = -0.000148639 Jy ! Component: 150 - total flux cleaned = -0.000183459 Jy ! Component: 200 - total flux cleaned = -0.000201028 Jy ! Total flux subtracted in 200 components = -0.000201028 Jy ! Clean residual min=-0.002032 max=0.002533 Jy/beam ! Clean residual mean=0.000026 rms=0.000700 Jy/beam ! Combined flux in latest and established models = 0.128826 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 82 components and 0.128826 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122150Jy sigma=0.000767 ! Fit after self-cal, rms=0.122155Jy sigma=0.000767 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.59683e-05 Jy ! Component: 100 - total flux cleaned = -6.88611e-05 Jy ! Component: 150 - total flux cleaned = -0.000100103 Jy ! Component: 200 - total flux cleaned = -0.000130239 Jy ! Total flux subtracted in 200 components = -0.000130239 Jy ! Clean residual min=-0.001963 max=0.002490 Jy/beam ! Clean residual mean=0.000026 rms=0.000688 Jy/beam ! Combined flux in latest and established models = 0.128696 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 84 components and 0.128696 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122153Jy sigma=0.000767 ! Fit after self-cal, rms=0.122152Jy sigma=0.000767 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.004 mas, bmaj=8.156 mas, bpa=-2.818 degrees ! Estimated noise=1084.5 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.004 x 8.156 at -2.818 degrees (North through East) ! Clean map min=-0.0027615 max=0.12006 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.411 mas, bmaj=7.407 mas, bpa=-2.017 degrees ! Estimated noise=3267.87 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0936707 Jy ! Component: 100 - total flux cleaned = 0.114599 Jy ! Component: 150 - total flux cleaned = 0.122806 Jy ! Component: 200 - total flux cleaned = 0.127806 Jy ! Total flux subtracted in 200 components = 0.127806 Jy ! Clean residual min=-0.008213 max=0.007910 Jy/beam ! Clean residual mean=0.000013 rms=0.002107 Jy/beam ! Combined flux in latest and established models = 0.127806 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.127806 Jy ! Inverting map and beam ! Estimated beam: bmin=3.004 mas, bmaj=8.156 mas, bpa=-2.818 degrees ! Estimated noise=1084.5 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00141885 Jy ! Component: 100 - total flux cleaned = 0.00153238 Jy ! Component: 150 - total flux cleaned = 0.00147189 Jy ! Component: 200 - total flux cleaned = 0.00152196 Jy ! Total flux subtracted in 200 components = 0.00152196 Jy ! Clean residual min=-0.002646 max=0.002649 Jy/beam ! Clean residual mean=0.000013 rms=0.000642 Jy/beam ! Combined flux in latest and established models = 0.129328 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 45 components and 0.129328 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.194 mas, bmaj=22.88 mas, bpa=2.203 degrees ! Estimated noise=1321.28 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000223397 Jy ! Component: 100 - total flux cleaned = 0.000254604 Jy ! Component: 150 - total flux cleaned = 0.00028093 Jy ! Component: 200 - total flux cleaned = 0.000234424 Jy ! Total flux subtracted in 200 components = 0.000234424 Jy ! Clean residual min=-0.002084 max=0.002494 Jy/beam ! Clean residual mean=0.000028 rms=0.000739 Jy/beam ! Combined flux in latest and established models = 0.129562 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.46275e-05 Jy ! Component: 100 - total flux cleaned = -0.000108537 Jy ! Component: 150 - total flux cleaned = -0.000169866 Jy ! Component: 200 - total flux cleaned = -0.000227911 Jy ! Total flux subtracted in 200 components = -0.000227911 Jy ! Clean residual min=-0.002029 max=0.002460 Jy/beam ! Clean residual mean=0.000027 rms=0.000725 Jy/beam ! Combined flux in latest and established models = 0.129335 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 62 components and 0.129335 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.004 mas, bmaj=8.156 mas, bpa=-2.818 degrees ! Estimated noise=1084.5 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000335563 Jy ! Component: 100 - total flux cleaned = -0.000330991 Jy ! Component: 150 - total flux cleaned = -0.000361796 Jy ! Component: 200 - total flux cleaned = -0.000391087 Jy ! Total flux subtracted in 200 components = -0.000391087 Jy ! Clean residual min=-0.002683 max=0.002569 Jy/beam ! Clean residual mean=0.000012 rms=0.000613 Jy/beam ! Combined flux in latest and established models = 0.128943 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 75 components and 0.128943 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122177Jy sigma=0.000767 ! Fit after self-cal, rms=0.122168Jy sigma=0.000767 wmodel J1155-3107_S_2014_08_09_pus_map.mod ! Writing 75 model components to file: J1155-3107_S_2014_08_09_pus_map.mod wobs J1155-3107_S_2014_08_09_pus_uvs.fits ! Writing UV FITS file: J1155-3107_S_2014_08_09_pus_uvs.fits wwins J1155-3107_S_2014_08_09_pus_map.win ! wwins: Wrote 2 windows to J1155-3107_S_2014_08_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000572659 Jy ! Component: 100 - total flux cleaned = -0.000954779 Jy ! Component: 150 - total flux cleaned = -0.00134914 Jy ! Component: 200 - total flux cleaned = -0.00149887 Jy ! Component: 250 - total flux cleaned = -0.00164365 Jy ! Component: 300 - total flux cleaned = -0.00185367 Jy ! Component: 350 - total flux cleaned = -0.00212467 Jy ! Component: 400 - total flux cleaned = -0.00225692 Jy ! Component: 450 - total flux cleaned = -0.00235454 Jy ! Component: 500 - total flux cleaned = -0.00248021 Jy ! Component: 550 - total flux cleaned = -0.00241952 Jy ! Component: 600 - total flux cleaned = -0.00238989 Jy ! Component: 650 - total flux cleaned = -0.00239026 Jy ! Component: 700 - total flux cleaned = -0.00244744 Jy ! Component: 750 - total flux cleaned = -0.00239127 Jy ! Component: 800 - total flux cleaned = -0.00239148 Jy ! Component: 850 - total flux cleaned = -0.00239179 Jy ! Component: 900 - total flux cleaned = -0.00233892 Jy ! Component: 950 - total flux cleaned = -0.00244364 Jy ! Component: 1000 - total flux cleaned = -0.00241757 Jy ! Component: 1050 - total flux cleaned = -0.00239252 Jy ! Component: 1100 - total flux cleaned = -0.00246718 Jy ! Component: 1150 - total flux cleaned = -0.00241791 Jy ! Component: 1200 - total flux cleaned = -0.00239428 Jy ! Component: 1250 - total flux cleaned = -0.00239476 Jy ! Component: 1300 - total flux cleaned = -0.00241876 Jy ! Component: 1350 - total flux cleaned = -0.0024191 Jy ! Component: 1400 - total flux cleaned = -0.0024646 Jy ! Component: 1450 - total flux cleaned = -0.00244218 Jy ! Component: 1500 - total flux cleaned = -0.00253103 Jy ! Component: 1550 - total flux cleaned = -0.00257451 Jy ! Component: 1600 - total flux cleaned = -0.00257436 Jy ! Component: 1650 - total flux cleaned = -0.00268145 Jy ! Component: 1700 - total flux cleaned = -0.00274453 Jy ! Component: 1750 - total flux cleaned = -0.00278621 Jy ! Component: 1800 - total flux cleaned = -0.00284833 Jy ! Component: 1850 - total flux cleaned = -0.00290984 Jy ! Component: 1900 - total flux cleaned = -0.0030109 Jy ! Component: 1950 - total flux cleaned = -0.00301083 Jy ! Component: 2000 - total flux cleaned = -0.00307061 Jy ! Component: 2050 - total flux cleaned = -0.00314908 Jy ! Component: 2100 - total flux cleaned = -0.00312963 Jy ! Component: 2150 - total flux cleaned = -0.00318715 Jy ! Component: 2200 - total flux cleaned = -0.00324435 Jy ! Component: 2250 - total flux cleaned = -0.00322522 Jy ! Component: 2300 - total flux cleaned = -0.00324375 Jy ! Component: 2350 - total flux cleaned = -0.00322533 Jy ! Component: 2400 - total flux cleaned = -0.00328042 Jy ! Component: 2450 - total flux cleaned = -0.00324375 Jy ! Component: 2500 - total flux cleaned = -0.00329782 Jy ! Component: 2550 - total flux cleaned = -0.00329767 Jy ! Component: 2600 - total flux cleaned = -0.00335066 Jy ! Component: 2650 - total flux cleaned = -0.00336816 Jy ! Component: 2700 - total flux cleaned = -0.00335082 Jy ! Component: 2750 - total flux cleaned = -0.00340266 Jy ! Component: 2800 - total flux cleaned = -0.00341979 Jy ! Component: 2850 - total flux cleaned = -0.00345375 Jy ! Component: 2900 - total flux cleaned = -0.0034874 Jy ! Component: 2950 - total flux cleaned = -0.00348739 Jy ! Component: 3000 - total flux cleaned = -0.00355388 Jy ! Component: 3050 - total flux cleaned = -0.00358675 Jy ! Component: 3100 - total flux cleaned = -0.0036358 Jy ! Component: 3150 - total flux cleaned = -0.00363592 Jy ! Component: 3200 - total flux cleaned = -0.00370032 Jy ! Component: 3250 - total flux cleaned = -0.00368426 Jy ! Component: 3300 - total flux cleaned = -0.00371612 Jy ! Component: 3350 - total flux cleaned = -0.00377923 Jy ! Component: 3400 - total flux cleaned = -0.00374787 Jy ! Component: 3450 - total flux cleaned = -0.00379453 Jy ! Component: 3500 - total flux cleaned = -0.00382547 Jy ! Component: 3550 - total flux cleaned = -0.00390228 Jy ! Component: 3600 - total flux cleaned = -0.0039634 Jy ! Component: 3650 - total flux cleaned = -0.00399374 Jy ! Component: 3700 - total flux cleaned = -0.0040088 Jy ! Component: 3750 - total flux cleaned = -0.00406877 Jy ! Component: 3800 - total flux cleaned = -0.00412808 Jy ! Component: 3850 - total flux cleaned = -0.00414287 Jy ! Component: 3900 - total flux cleaned = -0.0041577 Jy ! Component: 3950 - total flux cleaned = -0.00424542 Jy ! Component: 4000 - total flux cleaned = -0.0042308 Jy ! Component: 4050 - total flux cleaned = -0.00423104 Jy ! Total flux subtracted in 4096 components = -0.00428871 Jy ! Clean residual min=-0.000797 max=0.000743 Jy/beam ! Clean residual mean=0.000002 rms=0.000258 Jy/beam ! Combined flux in latest and established models = 0.124655 Jy keep ! Adding 242 model components to the UV plane model. ! The established model now contains 317 components and 0.124655 Jy ![Exited script file: muppet] wmap "J1155-3107_S_2014_08_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.004 x 8.156 at -2.818 degrees (North through East) ! Clean map min=-0.0029494 max=0.11837 Jy/beam ! Writing clean map to FITS file: J1155-3107_S_2014_08_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.118373 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00025724 device "J1155-3107_S_2014_08_09_pus\_map.eps/VPS" ! Attempting to open device: 'J1155-3107_S_2014_08_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.651938 0.651938 1.30388 2.60775 5.2155 10.431 20.862 41.724 83.448 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.118 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.004 x 8.156 at -2.818 degrees (North through East) ! Clean map min=-0.0029494 max=0.11837 Jy/beam quit ! Quitting program ! Log file J1155-3107_S_2014_08_09_pus_uvs.log closed on Tue Nov 29 23:04:13 2016