! Started logfile: J1155+4555_S_2015_01_22_pus_uvs.log on Tue Jan 3 22:52:30 2017 obs J1155+4555_S_2015_01_22_pus_uva.fits ! Reading UV FITS file: J1155+4555_S_2015_01_22_pus_uva.fits ! AN table 1: 63 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.8 visibilities/baseline/integration-bin. ! Found source: J1155+4555 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 281 lines of history. ! ! Reading 9072 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1155+4555_S_2015_01_22_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 63 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 63 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 63 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 63 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.814833Jy sigma=0.009659 ! Fit after self-cal, rms=0.767073Jy sigma=0.009134 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.53 mas, bmaj=9.898 mas, bpa=-51.62 degrees ! Estimated noise=1059.02 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.168927 Jy ! Component: 100 - total flux cleaned = 0.227514 Jy ! Total flux subtracted in 100 components = 0.227514 Jy ! Clean residual min=-0.021179 max=0.032103 Jy/beam ! Clean residual mean=0.000086 rms=0.006942 Jy/beam ! Combined flux in latest and established models = 0.227514 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.227514 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119383Jy sigma=0.001388 ! Fit after self-cal, rms=0.119454Jy sigma=0.001386 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.21 mas, bmaj=10.04 mas, bpa=-52.17 degrees ! Estimated noise=633.465 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0441371 Jy ! Component: 100 - total flux cleaned = 0.0679237 Jy ! Component: 150 - total flux cleaned = 0.0830854 Jy ! Component: 200 - total flux cleaned = 0.0933393 Jy ! Total flux subtracted in 200 components = 0.0933393 Jy ! Clean residual min=-0.020987 max=0.034646 Jy/beam ! Clean residual mean=0.000207 rms=0.007310 Jy/beam ! Combined flux in latest and established models = 0.320853 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 51 components and 0.320853 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103311Jy sigma=0.001152 ! Fit after self-cal, rms=0.103495Jy sigma=0.001150 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.00* HN 0.94 KP 1.30 ! LA 1.09 MK 1.08 NL 1.00 OV 0.82 ! PT 0.90 SC 1.11 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.00* HN 1.00 KP 1.22 ! LA 1.06 MK 1.10 NL 1.00 OV 0.86 ! PT 0.91 SC 1.17 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.86 FD 1.00* HN 1.00 KP 1.09 ! LA 0.86 MK 1.09 NL 1.27 OV 0.80 ! PT 0.88 SC 1.18 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00* HN 0.97 KP 1.06 ! LA 0.95 MK 1.07 NL 1.02 OV 0.84 ! PT 0.95 SC 1.16 ! ! ! Fit before self-cal, rms=0.103495Jy sigma=0.001150 ! Fit after self-cal, rms=0.101316Jy sigma=0.001022 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.319 mas, bmaj=10.09 mas, bpa=-52.7 degrees ! Estimated noise=630.261 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2.5, -25). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0299293 Jy ! Component: 100 - total flux cleaned = 0.0435368 Jy ! Component: 150 - total flux cleaned = 0.0462733 Jy ! Component: 200 - total flux cleaned = 0.0494583 Jy ! Total flux subtracted in 200 components = 0.0494583 Jy ! Clean residual min=-0.014540 max=0.016365 Jy/beam ! Clean residual mean=0.000069 rms=0.003534 Jy/beam ! Combined flux in latest and established models = 0.370312 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 83 components and 0.370312 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089819Jy sigma=0.000901 ! Fit after self-cal, rms=0.089089Jy sigma=0.000895 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089089Jy sigma=0.000895 ! Fit after self-cal, rms=0.083454Jy sigma=0.000884 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.238 mas, bmaj=10.14 mas, bpa=-52.44 degrees ! Estimated noise=607.789 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00591157 Jy ! Component: 100 - total flux cleaned = 0.00999631 Jy ! Component: 150 - total flux cleaned = 0.0117217 Jy ! Component: 200 - total flux cleaned = 0.0129592 Jy ! Total flux subtracted in 200 components = 0.0129592 Jy ! Clean residual min=-0.010587 max=0.010636 Jy/beam ! Clean residual mean=0.000043 rms=0.002644 Jy/beam ! Combined flux in latest and established models = 0.383271 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 113 components and 0.383271 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080577Jy sigma=0.000854 ! Fit after self-cal, rms=0.080023Jy sigma=0.000850 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00322067 Jy ! Component: 100 - total flux cleaned = 0.00545114 Jy ! Component: 150 - total flux cleaned = 0.00701856 Jy ! Component: 200 - total flux cleaned = 0.0082624 Jy ! Total flux subtracted in 200 components = 0.0082624 Jy ! Clean residual min=-0.009810 max=0.009452 Jy/beam ! Clean residual mean=0.000033 rms=0.002325 Jy/beam ! Combined flux in latest and established models = 0.391533 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 138 components and 0.391533 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078758Jy sigma=0.000838 ! Fit after self-cal, rms=0.078514Jy sigma=0.000837 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078514Jy sigma=0.000837 ! Fit after self-cal, rms=0.076766Jy sigma=0.000833 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.225 mas, bmaj=10.15 mas, bpa=-52.28 degrees ! Estimated noise=602.574 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0041392 Jy ! Component: 100 - total flux cleaned = 0.00595756 Jy ! Component: 150 - total flux cleaned = 0.00689364 Jy ! Component: 200 - total flux cleaned = 0.00759991 Jy ! Total flux subtracted in 200 components = 0.00759991 Jy ! Clean residual min=-0.008007 max=0.007897 Jy/beam ! Clean residual mean=0.000024 rms=0.001971 Jy/beam ! Combined flux in latest and established models = 0.399133 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 159 components and 0.399133 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075839Jy sigma=0.000824 ! Fit after self-cal, rms=0.075639Jy sigma=0.000823 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00183922 Jy ! Component: 100 - total flux cleaned = 0.00263866 Jy ! Component: 150 - total flux cleaned = 0.00324668 Jy ! Component: 200 - total flux cleaned = 0.00403867 Jy ! Total flux subtracted in 200 components = 0.00403867 Jy ! Clean residual min=-0.007766 max=0.007263 Jy/beam ! Clean residual mean=0.000019 rms=0.001829 Jy/beam ! Combined flux in latest and established models = 0.403172 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 173 components and 0.403172 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075162Jy sigma=0.000818 ! Fit after self-cal, rms=0.075070Jy sigma=0.000818 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075070Jy sigma=0.000818 ! Fit after self-cal, rms=0.074788Jy sigma=0.000816 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.165 mas, bmaj=10.74 mas, bpa=-61.64 degrees ! Estimated noise=732.554 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00440839 Jy ! Component: 100 - total flux cleaned = 0.00581562 Jy ! Component: 150 - total flux cleaned = 0.00581972 Jy ! Component: 200 - total flux cleaned = 0.00581764 Jy ! Total flux subtracted in 200 components = 0.00581764 Jy ! Clean residual min=-0.008529 max=0.006956 Jy/beam ! Clean residual mean=0.000028 rms=0.002501 Jy/beam ! Combined flux in latest and established models = 0.40899 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 191 components and 0.40899 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074338Jy sigma=0.000813 ! Fit after self-cal, rms=0.074249Jy sigma=0.000812 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00124556 Jy ! Component: 100 - total flux cleaned = 0.00124075 Jy ! Component: 150 - total flux cleaned = 0.00124103 Jy ! Component: 200 - total flux cleaned = 0.00113517 Jy ! Total flux subtracted in 200 components = 0.00113517 Jy ! Clean residual min=-0.008614 max=0.006729 Jy/beam ! Clean residual mean=0.000021 rms=0.002330 Jy/beam ! Combined flux in latest and established models = 0.410125 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 204 components and 0.410125 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074064Jy sigma=0.000811 ! Fit after self-cal, rms=0.074032Jy sigma=0.000811 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.228 mas, bmaj=10.15 mas, bpa=-52.21 degrees ! Estimated noise=603.434 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.228 x 10.15 at -52.21 degrees (North through East) ! Clean map min=-0.0069856 max=0.23079 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.546 mas, bmaj=9.991 mas, bpa=-51.79 degrees ! Estimated noise=1018.01 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.162337 Jy ! Component: 100 - total flux cleaned = 0.2193 Jy ! Component: 150 - total flux cleaned = 0.253832 Jy ! Component: 200 - total flux cleaned = 0.279104 Jy ! Total flux subtracted in 200 components = 0.279104 Jy ! Clean residual min=-0.012395 max=0.019243 Jy/beam ! Clean residual mean=0.000053 rms=0.003972 Jy/beam ! Combined flux in latest and established models = 0.279104 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.279104 Jy ! Inverting map and beam ! Estimated beam: bmin=3.228 mas, bmaj=10.15 mas, bpa=-52.21 degrees ! Estimated noise=603.434 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (46.5, -20.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0299904 Jy ! Component: 100 - total flux cleaned = 0.049751 Jy ! Component: 150 - total flux cleaned = 0.064049 Jy ! Component: 200 - total flux cleaned = 0.0752012 Jy ! Total flux subtracted in 200 components = 0.0752012 Jy ! Clean residual min=-0.009441 max=0.007946 Jy/beam ! Clean residual mean=0.000097 rms=0.002630 Jy/beam ! Combined flux in latest and established models = 0.354306 Jy ! Adding 58 model components to the UV plane model. ! The established model now contains 78 components and 0.354306 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.165 mas, bmaj=10.74 mas, bpa=-61.64 degrees ! Estimated noise=732.554 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.014371 Jy ! Component: 100 - total flux cleaned = 0.0243159 Jy ! Component: 150 - total flux cleaned = 0.0319215 Jy ! Component: 200 - total flux cleaned = 0.0381566 Jy ! Total flux subtracted in 200 components = 0.0381566 Jy ! Clean residual min=-0.009411 max=0.006730 Jy/beam ! Clean residual mean=0.000114 rms=0.002703 Jy/beam ! Combined flux in latest and established models = 0.392462 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.005265 Jy ! Component: 100 - total flux cleaned = 0.00893997 Jy ! Component: 150 - total flux cleaned = 0.0112265 Jy ! Component: 200 - total flux cleaned = 0.013296 Jy ! Total flux subtracted in 200 components = 0.013296 Jy ! Clean residual min=-0.008421 max=0.007297 Jy/beam ! Clean residual mean=0.000081 rms=0.002296 Jy/beam ! Combined flux in latest and established models = 0.405758 Jy ! Adding 91 model components to the UV plane model. ! The established model now contains 160 components and 0.405758 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.228 mas, bmaj=10.15 mas, bpa=-52.21 degrees ! Estimated noise=603.434 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000945027 Jy ! Component: 100 - total flux cleaned = 0.00256323 Jy ! Component: 150 - total flux cleaned = 0.00411461 Jy ! Component: 200 - total flux cleaned = 0.00527088 Jy ! Total flux subtracted in 200 components = 0.00527088 Jy ! Clean residual min=-0.005784 max=0.005482 Jy/beam ! Clean residual mean=0.000030 rms=0.001347 Jy/beam ! Combined flux in latest and established models = 0.411029 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 188 components and 0.411029 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073797Jy sigma=0.000806 ! Fit after self-cal, rms=0.073575Jy sigma=0.000803 wmodel J1155+4555_S_2015_01_22_pus_map.mod ! Writing 188 model components to file: J1155+4555_S_2015_01_22_pus_map.mod wobs J1155+4555_S_2015_01_22_pus_uvs.fits ! Writing UV FITS file: J1155+4555_S_2015_01_22_pus_uvs.fits wwins J1155+4555_S_2015_01_22_pus_map.win ! wwins: Wrote 3 windows to J1155+4555_S_2015_01_22_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00102304 Jy ! Component: 100 - total flux cleaned = -0.000643758 Jy ! Component: 150 - total flux cleaned = 5.76969e-07 Jy ! Component: 200 - total flux cleaned = 0.000798415 Jy ! Component: 250 - total flux cleaned = 0.00142316 Jy ! Component: 300 - total flux cleaned = 0.00189483 Jy ! Component: 350 - total flux cleaned = 0.00233883 Jy ! Component: 400 - total flux cleaned = 0.00281332 Jy ! Component: 450 - total flux cleaned = 0.00331614 Jy ! Component: 500 - total flux cleaned = 0.00379587 Jy ! Component: 550 - total flux cleaned = 0.00420858 Jy ! Component: 600 - total flux cleaned = 0.00442966 Jy ! Component: 650 - total flux cleaned = 0.00459943 Jy ! Component: 700 - total flux cleaned = 0.00476398 Jy ! Component: 750 - total flux cleaned = 0.00492246 Jy ! Component: 800 - total flux cleaned = 0.00503751 Jy ! Component: 850 - total flux cleaned = 0.00514888 Jy ! Component: 900 - total flux cleaned = 0.00529316 Jy ! Component: 950 - total flux cleaned = 0.0054681 Jy ! Component: 1000 - total flux cleaned = 0.00563786 Jy ! Component: 1050 - total flux cleaned = 0.00573688 Jy ! Component: 1100 - total flux cleaned = 0.00589853 Jy ! Component: 1150 - total flux cleaned = 0.00599333 Jy ! Component: 1200 - total flux cleaned = 0.00608559 Jy ! Component: 1250 - total flux cleaned = 0.00608646 Jy ! Component: 1300 - total flux cleaned = 0.00623296 Jy ! Component: 1350 - total flux cleaned = 0.00628996 Jy ! Component: 1400 - total flux cleaned = 0.0064286 Jy ! Component: 1450 - total flux cleaned = 0.00645518 Jy ! Component: 1500 - total flux cleaned = 0.00656068 Jy ! Component: 1550 - total flux cleaned = 0.00658592 Jy ! Component: 1600 - total flux cleaned = 0.00663588 Jy ! Component: 1650 - total flux cleaned = 0.00658634 Jy ! Component: 1700 - total flux cleaned = 0.00668315 Jy ! Component: 1750 - total flux cleaned = 0.00668338 Jy ! Component: 1800 - total flux cleaned = 0.00682391 Jy ! Component: 1850 - total flux cleaned = 0.00693833 Jy ! Component: 1900 - total flux cleaned = 0.00705124 Jy ! Component: 1950 - total flux cleaned = 0.00713961 Jy ! Component: 2000 - total flux cleaned = 0.00735675 Jy ! Component: 2050 - total flux cleaned = 0.00744224 Jy ! Component: 2100 - total flux cleaned = 0.00763137 Jy ! Component: 2150 - total flux cleaned = 0.00781725 Jy ! Component: 2200 - total flux cleaned = 0.00795901 Jy ! Component: 2250 - total flux cleaned = 0.00811888 Jy ! Component: 2300 - total flux cleaned = 0.00819746 Jy ! Component: 2350 - total flux cleaned = 0.00837155 Jy ! Component: 2400 - total flux cleaned = 0.00852397 Jy ! Component: 2450 - total flux cleaned = 0.00865541 Jy ! Component: 2500 - total flux cleaned = 0.00878488 Jy ! Component: 2550 - total flux cleaned = 0.008931 Jy ! Component: 2600 - total flux cleaned = 0.00911096 Jy ! Component: 2650 - total flux cleaned = 0.00928831 Jy ! Component: 2700 - total flux cleaned = 0.00944599 Jy ! Component: 2750 - total flux cleaned = 0.00961856 Jy ! Component: 2800 - total flux cleaned = 0.00980596 Jy ! Component: 2850 - total flux cleaned = 0.00992405 Jy ! Component: 2900 - total flux cleaned = 0.0100574 Jy ! Component: 2950 - total flux cleaned = 0.010222 Jy ! Component: 3000 - total flux cleaned = 0.0103033 Jy ! Component: 3050 - total flux cleaned = 0.0104004 Jy ! Component: 3100 - total flux cleaned = 0.0105442 Jy ! Component: 3150 - total flux cleaned = 0.0106707 Jy ! Component: 3200 - total flux cleaned = 0.0107646 Jy ! Component: 3250 - total flux cleaned = 0.0108422 Jy ! Component: 3300 - total flux cleaned = 0.0108883 Jy ! Component: 3350 - total flux cleaned = 0.0109339 Jy ! Component: 3400 - total flux cleaned = 0.0109642 Jy ! Component: 3450 - total flux cleaned = 0.0110243 Jy ! Component: 3500 - total flux cleaned = 0.0110688 Jy ! Component: 3550 - total flux cleaned = 0.0110835 Jy ! Component: 3600 - total flux cleaned = 0.0111423 Jy ! Component: 3650 - total flux cleaned = 0.0111713 Jy ! Component: 3700 - total flux cleaned = 0.0112436 Jy ! Component: 3750 - total flux cleaned = 0.011344 Jy ! Component: 3800 - total flux cleaned = 0.0113867 Jy ! Component: 3850 - total flux cleaned = 0.0114856 Jy ! Component: 3900 - total flux cleaned = 0.0115698 Jy ! Component: 3950 - total flux cleaned = 0.0116397 Jy ! Component: 4000 - total flux cleaned = 0.0117228 Jy ! Component: 4050 - total flux cleaned = 0.0118605 Jy ! Total flux subtracted in 4096 components = 0.0119152 Jy ! Clean residual min=-0.000762 max=0.000816 Jy/beam ! Clean residual mean=0.000008 rms=0.000255 Jy/beam ! Combined flux in latest and established models = 0.422944 Jy keep ! Adding 324 model components to the UV plane model. ! The established model now contains 512 components and 0.422944 Jy ![Exited script file: muppet] wmap "J1155+4555_S_2015_01_22_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.228 x 10.15 at -52.21 degrees (North through East) ! Clean map min=-0.0026735 max=0.23041 Jy/beam ! Writing clean map to FITS file: J1155+4555_S_2015_01_22_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.230408 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000237886 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.309737 0.309737 0.619474 1.23895 2.4779 4.95579 9.91158 19.8232 39.6463 79.2927 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.23 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.228 x 10.15 at -52.21 degrees (North through East) ! Clean map min=-0.0026735 max=0.23041 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1155+4555_S_2015_01_22_pus_uvs.log closed on Tue Jan 3 22:52:38 2017