! Started logfile: J1150+0630_S_2015_01_22_pus_uvs.log on Tue Jan 3 22:52:16 2017 obs J1150+0630_S_2015_01_22_pus_uva.fits ! Reading UV FITS file: J1150+0630_S_2015_01_22_pus_uva.fits ! AN table 1: 43 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.622222 visibilities/baseline/integration-bin. ! Found source: J1150+0630 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 281 lines of history. ! ! Reading 4816 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1150+0630_S_2015_01_22_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 86 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 86 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 86 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 86 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.839071Jy sigma=0.009728 ! Fit after self-cal, rms=0.823912Jy sigma=0.009551 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.141 mas, bmaj=11.76 mas, bpa=-28.39 degrees ! Estimated noise=1477.69 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.139746 Jy ! Component: 100 - total flux cleaned = 0.170535 Jy ! Total flux subtracted in 100 components = 0.170535 Jy ! Clean residual min=-0.009522 max=0.015084 Jy/beam ! Clean residual mean=0.000009 rms=0.002989 Jy/beam ! Combined flux in latest and established models = 0.170535 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.170535 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082484Jy sigma=0.000851 ! Fit after self-cal, rms=0.082486Jy sigma=0.000851 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.901 mas, bmaj=11.65 mas, bpa=-27.57 degrees ! Estimated noise=903.534 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0118854 Jy ! Component: 100 - total flux cleaned = 0.0130532 Jy ! Component: 150 - total flux cleaned = 0.0126998 Jy ! Component: 200 - total flux cleaned = 0.0121331 Jy ! Total flux subtracted in 200 components = 0.0121331 Jy ! Clean residual min=-0.008021 max=0.009877 Jy/beam ! Clean residual mean=0.000058 rms=0.002417 Jy/beam ! Combined flux in latest and established models = 0.182668 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 21 components and 0.182668 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080829Jy sigma=0.000825 ! Fit after self-cal, rms=0.080839Jy sigma=0.000825 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.00* HN 0.94 KP 1.02 ! LA 1.21 MK 1.02 NL 1.07 OV 0.91 ! PT 1.00 SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00* HN 1.01 KP 0.99 ! LA 1.20 MK 1.01 NL 1.29 OV 0.95 ! PT 0.99 SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 1.00* HN 0.99 KP 0.84 ! LA 0.96 MK 1.03 NL 1.26 OV 0.89 ! PT 0.97 SC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.00* HN 1.00 KP 0.76 ! LA 1.05 MK 1.00 NL 0.89 OV 0.96 ! PT 1.00 SC 1.00* ! ! ! Fit before self-cal, rms=0.080839Jy sigma=0.000825 ! Fit after self-cal, rms=0.076416Jy sigma=0.000766 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.94 mas, bmaj=11.5 mas, bpa=-27.46 degrees ! Estimated noise=895.479 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00261602 Jy ! Component: 100 - total flux cleaned = -0.00359652 Jy ! Component: 150 - total flux cleaned = -0.0036303 Jy ! Component: 200 - total flux cleaned = -0.00371046 Jy ! Total flux subtracted in 200 components = -0.00371046 Jy ! Clean residual min=-0.002695 max=0.002849 Jy/beam ! Clean residual mean=-0.000015 rms=0.000781 Jy/beam ! Combined flux in latest and established models = 0.178958 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 30 components and 0.178958 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076325Jy sigma=0.000765 ! Fit after self-cal, rms=0.076403Jy sigma=0.000765 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076403Jy sigma=0.000765 ! Fit after self-cal, rms=0.076641Jy sigma=0.000764 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.952 mas, bmaj=11.48 mas, bpa=-27.42 degrees ! Estimated noise=895.171 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00168626 Jy ! Component: 100 - total flux cleaned = -0.00202281 Jy ! Component: 150 - total flux cleaned = -0.00205029 Jy ! Component: 200 - total flux cleaned = -0.00207137 Jy ! Total flux subtracted in 200 components = -0.00207137 Jy ! Clean residual min=-0.002506 max=0.002617 Jy/beam ! Clean residual mean=-0.000013 rms=0.000690 Jy/beam ! Combined flux in latest and established models = 0.176886 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 33 components and 0.176886 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076599Jy sigma=0.000764 ! Fit after self-cal, rms=0.076606Jy sigma=0.000764 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00016924 Jy ! Component: 100 - total flux cleaned = -0.000207234 Jy ! Component: 150 - total flux cleaned = -0.000221765 Jy ! Component: 200 - total flux cleaned = -0.000235003 Jy ! Total flux subtracted in 200 components = -0.000235003 Jy ! Clean residual min=-0.002482 max=0.002514 Jy/beam ! Clean residual mean=-0.000014 rms=0.000683 Jy/beam ! Combined flux in latest and established models = 0.176651 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 42 components and 0.176651 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076598Jy sigma=0.000764 ! Fit after self-cal, rms=0.076597Jy sigma=0.000764 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076597Jy sigma=0.000764 ! Fit after self-cal, rms=0.076811Jy sigma=0.000763 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.96 mas, bmaj=11.47 mas, bpa=-27.39 degrees ! Estimated noise=894.951 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00115921 Jy ! Component: 100 - total flux cleaned = -0.00142545 Jy ! Component: 150 - total flux cleaned = -0.00144288 Jy ! Component: 200 - total flux cleaned = -0.00147556 Jy ! Total flux subtracted in 200 components = -0.00147556 Jy ! Clean residual min=-0.002314 max=0.002334 Jy/beam ! Clean residual mean=-0.000012 rms=0.000624 Jy/beam ! Combined flux in latest and established models = 0.175176 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 49 components and 0.175176 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076791Jy sigma=0.000763 ! Fit after self-cal, rms=0.076798Jy sigma=0.000763 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.44246e-05 Jy ! Component: 100 - total flux cleaned = -8.23209e-05 Jy ! Component: 150 - total flux cleaned = -0.000120086 Jy ! Component: 200 - total flux cleaned = -0.000142771 Jy ! Total flux subtracted in 200 components = -0.000142771 Jy ! Clean residual min=-0.002323 max=0.002295 Jy/beam ! Clean residual mean=-0.000013 rms=0.000620 Jy/beam ! Combined flux in latest and established models = 0.175033 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 53 components and 0.175033 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076794Jy sigma=0.000763 ! Fit after self-cal, rms=0.076793Jy sigma=0.000763 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076793Jy sigma=0.000763 ! Fit after self-cal, rms=0.076940Jy sigma=0.000763 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.893 mas, bmaj=11.96 mas, bpa=-14.45 degrees ! Estimated noise=1064.01 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00074842 Jy ! Component: 100 - total flux cleaned = -0.00100324 Jy ! Component: 150 - total flux cleaned = -0.00104399 Jy ! Component: 200 - total flux cleaned = -0.00108015 Jy ! Total flux subtracted in 200 components = -0.00108015 Jy ! Clean residual min=-0.003062 max=0.002437 Jy/beam ! Clean residual mean=-0.000022 rms=0.000794 Jy/beam ! Combined flux in latest and established models = 0.173953 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 69 components and 0.173953 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076931Jy sigma=0.000763 ! Fit after self-cal, rms=0.076937Jy sigma=0.000763 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.9677e-05 Jy ! Component: 100 - total flux cleaned = -7.35462e-05 Jy ! Component: 150 - total flux cleaned = -9.49019e-05 Jy ! Component: 200 - total flux cleaned = -0.000114409 Jy ! Total flux subtracted in 200 components = -0.000114409 Jy ! Clean residual min=-0.003039 max=0.002397 Jy/beam ! Clean residual mean=-0.000023 rms=0.000794 Jy/beam ! Combined flux in latest and established models = 0.173838 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 87 components and 0.173838 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076936Jy sigma=0.000763 ! Fit after self-cal, rms=0.076936Jy sigma=0.000763 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.966 mas, bmaj=11.46 mas, bpa=-27.36 degrees ! Estimated noise=894.372 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.966 x 11.46 at -27.36 degrees (North through East) ! Clean map min=-0.002578 max=0.17674 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.18 mas, bmaj=11.57 mas, bpa=-28.21 degrees ! Estimated noise=1465.11 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.138498 Jy ! Component: 100 - total flux cleaned = 0.1687 Jy ! Component: 150 - total flux cleaned = 0.176068 Jy ! Component: 200 - total flux cleaned = 0.176388 Jy ! Total flux subtracted in 200 components = 0.176388 Jy ! Clean residual min=-0.004307 max=0.003047 Jy/beam ! Clean residual mean=0.000001 rms=0.000928 Jy/beam ! Combined flux in latest and established models = 0.176388 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.176388 Jy ! Inverting map and beam ! Estimated beam: bmin=3.966 mas, bmaj=11.46 mas, bpa=-27.36 degrees ! Estimated noise=894.372 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000163641 Jy ! Component: 100 - total flux cleaned = -0.000389531 Jy ! Component: 150 - total flux cleaned = -0.000829144 Jy ! Component: 200 - total flux cleaned = -0.00117834 Jy ! Total flux subtracted in 200 components = -0.00117834 Jy ! Clean residual min=-0.002472 max=0.002393 Jy/beam ! Clean residual mean=-0.000006 rms=0.000665 Jy/beam ! Combined flux in latest and established models = 0.17521 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 28 components and 0.17521 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.893 mas, bmaj=11.96 mas, bpa=-14.45 degrees ! Estimated noise=1064.01 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000222131 Jy ! Component: 100 - total flux cleaned = -0.000408956 Jy ! Component: 150 - total flux cleaned = -0.000536141 Jy ! Component: 200 - total flux cleaned = -0.000642413 Jy ! Total flux subtracted in 200 components = -0.000642413 Jy ! Clean residual min=-0.002819 max=0.002408 Jy/beam ! Clean residual mean=-0.000017 rms=0.000813 Jy/beam ! Combined flux in latest and established models = 0.174568 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.19017e-05 Jy ! Component: 100 - total flux cleaned = -0.000149487 Jy ! Component: 150 - total flux cleaned = -0.000203704 Jy ! Component: 200 - total flux cleaned = -0.000252679 Jy ! Total flux subtracted in 200 components = -0.000252679 Jy ! Clean residual min=-0.002856 max=0.002431 Jy/beam ! Clean residual mean=-0.000019 rms=0.000804 Jy/beam ! Combined flux in latest and established models = 0.174315 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 49 components and 0.174315 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.966 mas, bmaj=11.46 mas, bpa=-27.36 degrees ! Estimated noise=894.372 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000175086 Jy ! Component: 100 - total flux cleaned = -0.00020322 Jy ! Component: 150 - total flux cleaned = -0.00022751 Jy ! Component: 200 - total flux cleaned = -0.000247996 Jy ! Total flux subtracted in 200 components = -0.000247996 Jy ! Clean residual min=-0.002441 max=0.002255 Jy/beam ! Clean residual mean=-0.000012 rms=0.000607 Jy/beam ! Combined flux in latest and established models = 0.174067 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 62 components and 0.174067 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076955Jy sigma=0.000763 ! Fit after self-cal, rms=0.076949Jy sigma=0.000763 wmodel J1150+0630_S_2015_01_22_pus_map.mod ! Writing 62 model components to file: J1150+0630_S_2015_01_22_pus_map.mod wobs J1150+0630_S_2015_01_22_pus_uvs.fits ! Writing UV FITS file: J1150+0630_S_2015_01_22_pus_uvs.fits wwins J1150+0630_S_2015_01_22_pus_map.win ! wwins: Wrote 1 windows to J1150+0630_S_2015_01_22_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00022583 Jy ! Component: 100 - total flux cleaned = -0.000259638 Jy ! Component: 150 - total flux cleaned = -0.000357816 Jy ! Component: 200 - total flux cleaned = -0.000631636 Jy ! Component: 250 - total flux cleaned = -0.000832644 Jy ! Component: 300 - total flux cleaned = -0.000995804 Jy ! Component: 350 - total flux cleaned = -0.00109876 Jy ! Component: 400 - total flux cleaned = -0.00114865 Jy ! Component: 450 - total flux cleaned = -0.00121951 Jy ! Component: 500 - total flux cleaned = -0.00126482 Jy ! Component: 550 - total flux cleaned = -0.00141902 Jy ! Component: 600 - total flux cleaned = -0.00163146 Jy ! Component: 650 - total flux cleaned = -0.0016721 Jy ! Component: 700 - total flux cleaned = -0.00173233 Jy ! Component: 750 - total flux cleaned = -0.00188806 Jy ! Component: 800 - total flux cleaned = -0.00201973 Jy ! Component: 850 - total flux cleaned = -0.00214815 Jy ! Component: 900 - total flux cleaned = -0.00229098 Jy ! Component: 950 - total flux cleaned = -0.00246501 Jy ! Component: 1000 - total flux cleaned = -0.00261793 Jy ! Component: 1050 - total flux cleaned = -0.00276789 Jy ! Component: 1100 - total flux cleaned = -0.0029476 Jy ! Component: 1150 - total flux cleaned = -0.00313921 Jy ! Component: 1200 - total flux cleaned = -0.00327986 Jy ! Component: 1250 - total flux cleaned = -0.00343358 Jy ! Component: 1300 - total flux cleaned = -0.00356951 Jy ! Component: 1350 - total flux cleaned = -0.00367317 Jy ! Component: 1400 - total flux cleaned = -0.00378993 Jy ! Component: 1450 - total flux cleaned = -0.00390513 Jy ! Component: 1500 - total flux cleaned = -0.00401821 Jy ! Component: 1550 - total flux cleaned = -0.0041435 Jy ! Component: 1600 - total flux cleaned = -0.00425301 Jy ! Component: 1650 - total flux cleaned = -0.00436095 Jy ! Component: 1700 - total flux cleaned = -0.00449413 Jy ! Component: 1750 - total flux cleaned = -0.00457289 Jy ! Component: 1800 - total flux cleaned = -0.00467678 Jy ! Component: 1850 - total flux cleaned = -0.00477901 Jy ! Component: 1900 - total flux cleaned = -0.00487997 Jy ! Component: 1950 - total flux cleaned = -0.00495467 Jy ! Component: 2000 - total flux cleaned = -0.00505315 Jy ! Component: 2050 - total flux cleaned = -0.00513836 Jy ! Component: 2100 - total flux cleaned = -0.00524679 Jy ! Component: 2150 - total flux cleaned = -0.00534203 Jy ! Component: 2200 - total flux cleaned = -0.00545979 Jy ! Component: 2250 - total flux cleaned = -0.00552976 Jy ! Component: 2300 - total flux cleaned = -0.00559911 Jy ! Component: 2350 - total flux cleaned = -0.00567903 Jy ! Component: 2400 - total flux cleaned = -0.00573573 Jy ! Component: 2450 - total flux cleaned = -0.00582556 Jy ! Component: 2500 - total flux cleaned = -0.00590333 Jy ! Component: 2550 - total flux cleaned = -0.00596937 Jy ! Component: 2600 - total flux cleaned = -0.00603503 Jy ! Component: 2650 - total flux cleaned = -0.00613274 Jy ! Component: 2700 - total flux cleaned = -0.00624054 Jy ! Component: 2750 - total flux cleaned = -0.00631554 Jy ! Component: 2800 - total flux cleaned = -0.00639006 Jy ! Component: 2850 - total flux cleaned = -0.00644308 Jy ! Component: 2900 - total flux cleaned = -0.00649575 Jy ! Component: 2950 - total flux cleaned = -0.0065377 Jy ! Component: 3000 - total flux cleaned = -0.00658997 Jy ! Component: 3050 - total flux cleaned = -0.006642 Jy ! Component: 3100 - total flux cleaned = -0.00667317 Jy ! Component: 3150 - total flux cleaned = -0.00673521 Jy ! Component: 3200 - total flux cleaned = -0.00677638 Jy ! Component: 3250 - total flux cleaned = -0.0068379 Jy ! Component: 3300 - total flux cleaned = -0.00687879 Jy ! Component: 3350 - total flux cleaned = -0.00689913 Jy ! Component: 3400 - total flux cleaned = -0.00696009 Jy ! Component: 3450 - total flux cleaned = -0.00700059 Jy ! Component: 3500 - total flux cleaned = -0.00704086 Jy ! Component: 3550 - total flux cleaned = -0.00709113 Jy ! Component: 3600 - total flux cleaned = -0.00713118 Jy ! Component: 3650 - total flux cleaned = -0.00718123 Jy ! Component: 3700 - total flux cleaned = -0.0072012 Jy ! Component: 3750 - total flux cleaned = -0.00725114 Jy ! Component: 3800 - total flux cleaned = -0.00727108 Jy ! Component: 3850 - total flux cleaned = -0.00731099 Jy ! Component: 3900 - total flux cleaned = -0.00735097 Jy ! Component: 3950 - total flux cleaned = -0.0073809 Jy ! Component: 4000 - total flux cleaned = -0.00743061 Jy ! Component: 4050 - total flux cleaned = -0.00747043 Jy ! Total flux subtracted in 4096 components = -0.00750016 Jy ! Clean residual min=-0.000562 max=0.000577 Jy/beam ! Clean residual mean=-0.000006 rms=0.000175 Jy/beam ! Combined flux in latest and established models = 0.166567 Jy keep ! Adding 251 model components to the UV plane model. ! The established model now contains 313 components and 0.166567 Jy ![Exited script file: muppet] wmap "J1150+0630_S_2015_01_22_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.966 x 11.46 at -27.36 degrees (North through East) ! Clean map min=-0.0017509 max=0.17674 Jy/beam ! Writing clean map to FITS file: J1150+0630_S_2015_01_22_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.176738 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000165418 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.280787 0.280787 0.561573 1.12315 2.24629 4.49259 8.98517 17.9703 35.9407 71.8814 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.176 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.966 x 11.46 at -27.36 degrees (North through East) ! Clean map min=-0.0017509 max=0.17674 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1150+0630_S_2015_01_22_pus_uvs.log closed on Tue Jan 3 22:52:23 2017