! Started logfile: J1149+3559_S_2015_01_23_pus_uvs.log on Mon Jan 2 19:23:54 2017 obs J1149+3559_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J1149+3559_S_2015_01_23_pus_uva.fits ! AN table 1: 93 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.783035 visibilities/baseline/integration-bin. ! Found source: J1149+3559 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 13108 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1149+3559_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 103 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 103 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 103 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 103 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.907930Jy sigma=0.011296 ! Fit after self-cal, rms=0.895676Jy sigma=0.011169 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.949 mas, bmaj=4.609 mas, bpa=-4.982 degrees ! Estimated noise=912.404 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.081235 Jy ! Component: 100 - total flux cleaned = 0.0996501 Jy ! Total flux subtracted in 100 components = 0.0996501 Jy ! Clean residual min=-0.004802 max=0.006580 Jy/beam ! Clean residual mean=0.000005 rms=0.001195 Jy/beam ! Combined flux in latest and established models = 0.09965 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.09965 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069967Jy sigma=0.000794 ! Fit after self-cal, rms=0.069962Jy sigma=0.000794 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.581 mas, bmaj=5.525 mas, bpa=-3.429 degrees ! Estimated noise=505.725 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00729443 Jy ! Component: 100 - total flux cleaned = 0.0107214 Jy ! Component: 150 - total flux cleaned = 0.0127034 Jy ! Component: 200 - total flux cleaned = 0.0139855 Jy ! Total flux subtracted in 200 components = 0.0139855 Jy ! Clean residual min=-0.003253 max=0.003633 Jy/beam ! Clean residual mean=0.000004 rms=0.000783 Jy/beam ! Combined flux in latest and established models = 0.113636 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 28 components and 0.113636 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069088Jy sigma=0.000786 ! Fit after self-cal, rms=0.069092Jy sigma=0.000786 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00* HN 0.98 KP 1.10 ! LA 0.97 MK 1.02 NL 1.04 OV 0.98 ! PT 1.06 SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00* HN 1.04 KP 1.00 ! LA 0.96 MK 1.03 NL 1.03 OV 1.03 ! PT 1.02 SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.00* HN 1.02 KP 0.88 ! LA 0.78 MK 1.04 NL 1.31 OV 0.93 ! PT 1.00 SC 1.05 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.00* HN 0.99 KP 0.82 ! LA 0.82 MK 1.02 NL 1.04 OV 0.99 ! PT 1.02 SC 0.99 ! ! ! Fit before self-cal, rms=0.069092Jy sigma=0.000786 ! Fit after self-cal, rms=0.066530Jy sigma=0.000770 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.618 mas, bmaj=5.582 mas, bpa=-3.175 degrees ! Estimated noise=504.968 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000669419 Jy ! Component: 100 - total flux cleaned = -0.000914149 Jy ! Component: 150 - total flux cleaned = -0.00098128 Jy ! Component: 200 - total flux cleaned = -0.0010179 Jy ! Total flux subtracted in 200 components = -0.0010179 Jy ! Clean residual min=-0.002015 max=0.001807 Jy/beam ! Clean residual mean=0.000005 rms=0.000442 Jy/beam ! Combined flux in latest and established models = 0.112618 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 41 components and 0.112618 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066521Jy sigma=0.000770 ! Fit after self-cal, rms=0.066514Jy sigma=0.000770 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066514Jy sigma=0.000770 ! Fit after self-cal, rms=0.066801Jy sigma=0.000767 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.624 mas, bmaj=5.589 mas, bpa=-3.275 degrees ! Estimated noise=504.434 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000473499 Jy ! Component: 100 - total flux cleaned = -0.000578317 Jy ! Component: 150 - total flux cleaned = -0.000645377 Jy ! Component: 200 - total flux cleaned = -0.000701889 Jy ! Total flux subtracted in 200 components = -0.000701889 Jy ! Clean residual min=-0.001276 max=0.001392 Jy/beam ! Clean residual mean=-0.000000 rms=0.000338 Jy/beam ! Combined flux in latest and established models = 0.111916 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 46 components and 0.111916 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066797Jy sigma=0.000767 ! Fit after self-cal, rms=0.066825Jy sigma=0.000767 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00011173 Jy ! Component: 100 - total flux cleaned = -0.00013682 Jy ! Component: 150 - total flux cleaned = -0.000169989 Jy ! Component: 200 - total flux cleaned = -0.000195071 Jy ! Total flux subtracted in 200 components = -0.000195071 Jy ! Clean residual min=-0.001271 max=0.001376 Jy/beam ! Clean residual mean=-0.000000 rms=0.000337 Jy/beam ! Combined flux in latest and established models = 0.111721 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 52 components and 0.111721 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066824Jy sigma=0.000767 ! Fit after self-cal, rms=0.066824Jy sigma=0.000767 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066824Jy sigma=0.000767 ! Fit after self-cal, rms=0.066895Jy sigma=0.000767 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.63 mas, bmaj=5.599 mas, bpa=-3.365 degrees ! Estimated noise=504.34 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000308079 Jy ! Component: 100 - total flux cleaned = -0.000396787 Jy ! Component: 150 - total flux cleaned = -0.000442712 Jy ! Component: 200 - total flux cleaned = -0.000483463 Jy ! Total flux subtracted in 200 components = -0.000483463 Jy ! Clean residual min=-0.001251 max=0.001358 Jy/beam ! Clean residual mean=-0.000000 rms=0.000334 Jy/beam ! Combined flux in latest and established models = 0.111237 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 56 components and 0.111237 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066893Jy sigma=0.000767 ! Fit after self-cal, rms=0.066896Jy sigma=0.000767 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.21419e-05 Jy ! Component: 100 - total flux cleaned = -7.55527e-05 Jy ! Component: 150 - total flux cleaned = -0.000100924 Jy ! Component: 200 - total flux cleaned = -0.000124237 Jy ! Total flux subtracted in 200 components = -0.000124237 Jy ! Clean residual min=-0.001256 max=0.001348 Jy/beam ! Clean residual mean=-0.000000 rms=0.000334 Jy/beam ! Combined flux in latest and established models = 0.111113 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 60 components and 0.111113 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066895Jy sigma=0.000767 ! Fit after self-cal, rms=0.066895Jy sigma=0.000767 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066895Jy sigma=0.000767 ! Fit after self-cal, rms=0.066933Jy sigma=0.000767 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.199 mas, bmaj=9.44 mas, bpa=0.2984 degrees ! Estimated noise=612.827 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000241549 Jy ! Component: 100 - total flux cleaned = -0.000262437 Jy ! Component: 150 - total flux cleaned = -0.000267263 Jy ! Component: 200 - total flux cleaned = -0.00027515 Jy ! Total flux subtracted in 200 components = -0.00027515 Jy ! Clean residual min=-0.001668 max=0.001850 Jy/beam ! Clean residual mean=-0.000001 rms=0.000418 Jy/beam ! Combined flux in latest and established models = 0.110838 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 62 components and 0.110838 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066933Jy sigma=0.000767 ! Fit after self-cal, rms=0.066934Jy sigma=0.000767 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-68.5, 127.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00147314 Jy ! Component: 100 - total flux cleaned = 0.0016309 Jy ! Component: 150 - total flux cleaned = 0.00170317 Jy ! Component: 200 - total flux cleaned = 0.00179903 Jy ! Total flux subtracted in 200 components = 0.00179903 Jy ! Clean residual min=-0.001586 max=0.001195 Jy/beam ! Clean residual mean=0.000001 rms=0.000357 Jy/beam ! Combined flux in latest and established models = 0.112637 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 85 components and 0.112637 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066912Jy sigma=0.000766 ! Fit after self-cal, rms=0.066907Jy sigma=0.000766 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.635 mas, bmaj=5.608 mas, bpa=-3.441 degrees ! Estimated noise=504.249 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.635 x 5.608 at -3.441 degrees (North through East) ! Clean map min=-0.0011007 max=0.10499 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.992 mas, bmaj=4.674 mas, bpa=-4.852 degrees ! Estimated noise=910.092 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0809698 Jy ! Component: 100 - total flux cleaned = 0.098931 Jy ! Component: 150 - total flux cleaned = 0.104964 Jy ! Component: 200 - total flux cleaned = 0.107059 Jy ! Total flux subtracted in 200 components = 0.107059 Jy ! Clean residual min=-0.003219 max=0.003612 Jy/beam ! Clean residual mean=0.000000 rms=0.000832 Jy/beam ! Combined flux in latest and established models = 0.107059 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.107059 Jy ! Inverting map and beam ! Estimated beam: bmin=3.635 mas, bmaj=5.608 mas, bpa=-3.441 degrees ! Estimated noise=504.249 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00235759 Jy ! Component: 100 - total flux cleaned = 0.00347193 Jy ! Component: 150 - total flux cleaned = 0.0041609 Jy ! Component: 200 - total flux cleaned = 0.00459011 Jy ! Total flux subtracted in 200 components = 0.00459011 Jy ! Clean residual min=-0.001232 max=0.001188 Jy/beam ! Clean residual mean=0.000001 rms=0.000318 Jy/beam ! Combined flux in latest and established models = 0.111649 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 44 components and 0.111649 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.199 mas, bmaj=9.44 mas, bpa=0.2984 degrees ! Estimated noise=612.827 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000962782 Jy ! Component: 100 - total flux cleaned = 0.00111494 Jy ! Component: 150 - total flux cleaned = 0.0012365 Jy ! Component: 200 - total flux cleaned = 0.00128833 Jy ! Total flux subtracted in 200 components = 0.00128833 Jy ! Clean residual min=-0.001537 max=0.001175 Jy/beam ! Clean residual mean=0.000000 rms=0.000354 Jy/beam ! Combined flux in latest and established models = 0.112938 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.986e-05 Jy ! Component: 100 - total flux cleaned = 5.57399e-05 Jy ! Component: 150 - total flux cleaned = 7.9186e-05 Jy ! Component: 200 - total flux cleaned = 0.0001111 Jy ! Total flux subtracted in 200 components = 0.0001111 Jy ! Clean residual min=-0.001504 max=0.001223 Jy/beam ! Clean residual mean=0.000000 rms=0.000348 Jy/beam ! Combined flux in latest and established models = 0.113049 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 82 components and 0.113049 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.635 mas, bmaj=5.608 mas, bpa=-3.441 degrees ! Estimated noise=504.249 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.85232e-05 Jy ! Component: 100 - total flux cleaned = 9.60223e-06 Jy ! Component: 150 - total flux cleaned = 2.69195e-05 Jy ! Component: 200 - total flux cleaned = 2.74311e-05 Jy ! Total flux subtracted in 200 components = 2.74311e-05 Jy ! Clean residual min=-0.001123 max=0.001221 Jy/beam ! Clean residual mean=-0.000000 rms=0.000296 Jy/beam ! Combined flux in latest and established models = 0.113076 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 101 components and 0.113076 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066892Jy sigma=0.000766 ! Fit after self-cal, rms=0.066887Jy sigma=0.000766 wmodel J1149+3559_S_2015_01_23_pus_map.mod ! Writing 101 model components to file: J1149+3559_S_2015_01_23_pus_map.mod wobs J1149+3559_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J1149+3559_S_2015_01_23_pus_uvs.fits wwins J1149+3559_S_2015_01_23_pus_map.win ! wwins: Wrote 2 windows to J1149+3559_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 9.49229e-06 Jy ! Component: 100 - total flux cleaned = -9.17519e-05 Jy ! Component: 150 - total flux cleaned = -0.000169304 Jy ! Component: 200 - total flux cleaned = -0.000225321 Jy ! Component: 250 - total flux cleaned = -0.00031565 Jy ! Component: 300 - total flux cleaned = -0.000438155 Jy ! Component: 350 - total flux cleaned = -0.000574115 Jy ! Component: 400 - total flux cleaned = -0.000706623 Jy ! Component: 450 - total flux cleaned = -0.000771139 Jy ! Component: 500 - total flux cleaned = -0.000787059 Jy ! Component: 550 - total flux cleaned = -0.000849195 Jy ! Component: 600 - total flux cleaned = -0.000864323 Jy ! Component: 650 - total flux cleaned = -0.000908757 Jy ! Component: 700 - total flux cleaned = -0.000923534 Jy ! Component: 750 - total flux cleaned = -0.000952365 Jy ! Component: 800 - total flux cleaned = -0.00102304 Jy ! Component: 850 - total flux cleaned = -0.00107845 Jy ! Component: 900 - total flux cleaned = -0.00109228 Jy ! Component: 950 - total flux cleaned = -0.00120019 Jy ! Component: 1000 - total flux cleaned = -0.00127967 Jy ! Component: 1050 - total flux cleaned = -0.00134493 Jy ! Component: 1100 - total flux cleaned = -0.00140963 Jy ! Component: 1150 - total flux cleaned = -0.00151206 Jy ! Component: 1200 - total flux cleaned = -0.00162563 Jy ! Component: 1250 - total flux cleaned = -0.00168781 Jy ! Component: 1300 - total flux cleaned = -0.00176162 Jy ! Component: 1350 - total flux cleaned = -0.0018345 Jy ! Component: 1400 - total flux cleaned = -0.00187062 Jy ! Component: 1450 - total flux cleaned = -0.00197765 Jy ! Component: 1500 - total flux cleaned = -0.00200126 Jy ! Component: 1550 - total flux cleaned = -0.00208289 Jy ! Component: 1600 - total flux cleaned = -0.00212913 Jy ! Component: 1650 - total flux cleaned = -0.00217477 Jy ! Component: 1700 - total flux cleaned = -0.00220865 Jy ! Component: 1750 - total flux cleaned = -0.00225344 Jy ! Component: 1800 - total flux cleaned = -0.002331 Jy ! Component: 1850 - total flux cleaned = -0.00238591 Jy ! Component: 1900 - total flux cleaned = -0.00244025 Jy ! Component: 1950 - total flux cleaned = -0.00248337 Jy ! Component: 2000 - total flux cleaned = -0.00252596 Jy ! Component: 2050 - total flux cleaned = -0.00257886 Jy ! Component: 2100 - total flux cleaned = -0.00258949 Jy ! Component: 2150 - total flux cleaned = -0.00269336 Jy ! Component: 2200 - total flux cleaned = -0.00272423 Jy ! Component: 2250 - total flux cleaned = -0.00279556 Jy ! Component: 2300 - total flux cleaned = -0.00279552 Jy ! Component: 2350 - total flux cleaned = -0.00286563 Jy ! Component: 2400 - total flux cleaned = -0.00291522 Jy ! Component: 2450 - total flux cleaned = -0.00294475 Jy ! Component: 2500 - total flux cleaned = -0.00295452 Jy ! Component: 2550 - total flux cleaned = -0.00302241 Jy ! Component: 2600 - total flux cleaned = -0.00306086 Jy ! Component: 2650 - total flux cleaned = -0.00309889 Jy ! Component: 2700 - total flux cleaned = -0.00312725 Jy ! Component: 2750 - total flux cleaned = -0.00319272 Jy ! Component: 2800 - total flux cleaned = -0.00318345 Jy ! Component: 2850 - total flux cleaned = -0.00323891 Jy ! Component: 2900 - total flux cleaned = -0.00326612 Jy ! Component: 2950 - total flux cleaned = -0.00330245 Jy ! Component: 3000 - total flux cleaned = -0.00332939 Jy ! Component: 3050 - total flux cleaned = -0.00335628 Jy ! Component: 3100 - total flux cleaned = -0.00336514 Jy ! Component: 3150 - total flux cleaned = -0.00338275 Jy ! Component: 3200 - total flux cleaned = -0.00339151 Jy ! Component: 3250 - total flux cleaned = -0.00340896 Jy ! Component: 3300 - total flux cleaned = -0.00340896 Jy ! Component: 3350 - total flux cleaned = -0.00338311 Jy ! Component: 3400 - total flux cleaned = -0.00340027 Jy ! Component: 3450 - total flux cleaned = -0.00345132 Jy ! Component: 3500 - total flux cleaned = -0.00344279 Jy ! Component: 3550 - total flux cleaned = -0.00340088 Jy ! Component: 3600 - total flux cleaned = -0.00340094 Jy ! Component: 3650 - total flux cleaned = -0.00342576 Jy ! Component: 3700 - total flux cleaned = -0.00340929 Jy ! Component: 3750 - total flux cleaned = -0.0033929 Jy ! Component: 3800 - total flux cleaned = -0.00336051 Jy ! Component: 3850 - total flux cleaned = -0.00338473 Jy ! Component: 3900 - total flux cleaned = -0.00337665 Jy ! Component: 3950 - total flux cleaned = -0.00336075 Jy ! Component: 4000 - total flux cleaned = -0.00337663 Jy ! Component: 4050 - total flux cleaned = -0.00336083 Jy ! Total flux subtracted in 4096 components = -0.00336079 Jy ! Clean residual min=-0.000423 max=0.000496 Jy/beam ! Clean residual mean=-0.000001 rms=0.000141 Jy/beam ! Combined flux in latest and established models = 0.109715 Jy keep ! Adding 283 model components to the UV plane model. ! The established model now contains 384 components and 0.109715 Jy ![Exited script file: muppet] wmap "J1149+3559_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.635 x 5.608 at -3.441 degrees (North through East) ! Clean map min=-0.00088215 max=0.1047 Jy/beam ! Writing clean map to FITS file: J1149+3559_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.104695 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000139868 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.400785 0.400785 0.80157 1.60314 3.20628 6.41256 12.8251 25.6502 51.3005 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.104 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.635 x 5.608 at -3.441 degrees (North through East) ! Clean map min=-0.00088215 max=0.1047 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1149+3559_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 19:23:59 2017