! Started logfile: J1149+2824_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:25:52 2017 obs J1149+2824_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J1149+2824_S_2014_01_04_pus_uva.fits ! AN table 1: 60 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.583333 visibilities/baseline/integration-bin. ! Found source: J1149+2824 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 5040 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1149+2824_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 120 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 120 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 120 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 120 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.902893Jy sigma=0.013386 ! Fit after self-cal, rms=0.892685Jy sigma=0.013220 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.186 mas, bmaj=4.864 mas, bpa=2.145 degrees ! Estimated noise=1333.91 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0821987 Jy ! Component: 100 - total flux cleaned = 0.102941 Jy ! Total flux subtracted in 100 components = 0.102941 Jy ! Clean residual min=-0.007271 max=0.007823 Jy/beam ! Clean residual mean=-0.000019 rms=0.001664 Jy/beam ! Combined flux in latest and established models = 0.102941 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.102941 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072777Jy sigma=0.000903 ! Fit after self-cal, rms=0.072778Jy sigma=0.000902 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.878 mas, bmaj=5.507 mas, bpa=2.046 degrees ! Estimated noise=718.864 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00959097 Jy ! Component: 100 - total flux cleaned = 0.0137035 Jy ! Component: 150 - total flux cleaned = 0.0160609 Jy ! Component: 200 - total flux cleaned = 0.0170818 Jy ! Total flux subtracted in 200 components = 0.0170818 Jy ! Clean residual min=-0.004140 max=0.004833 Jy/beam ! Clean residual mean=-0.000015 rms=0.001009 Jy/beam ! Combined flux in latest and established models = 0.120023 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 22 components and 0.120023 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071280Jy sigma=0.000889 ! Fit after self-cal, rms=0.071220Jy sigma=0.000889 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.00* KP 1.00* LA 1.06 ! MK 0.97 NL 0.92 OV 0.98 PT 1.01 ! SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.00* KP 1.00* LA 1.01 ! MK 1.02 NL 1.04 OV 0.99 PT 0.96 ! SC 0.91 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00* KP 1.00* LA 0.80 ! MK 1.01 NL 1.02 OV 0.90 PT 0.94 ! SC 0.94 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.17 FD 1.00* KP 1.00* LA 0.89 ! MK 0.99 NL 1.14 OV 1.01 PT 1.02 ! SC 0.95 ! ! ! Fit before self-cal, rms=0.071220Jy sigma=0.000889 ! Fit after self-cal, rms=0.067339Jy sigma=0.000870 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.836 mas, bmaj=5.527 mas, bpa=2.998 degrees ! Estimated noise=715.987 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2.5, 10). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00267551 Jy ! Component: 100 - total flux cleaned = 0.00324369 Jy ! Component: 150 - total flux cleaned = 0.00316708 Jy ! Component: 200 - total flux cleaned = 0.00306424 Jy ! Total flux subtracted in 200 components = 0.00306424 Jy ! Clean residual min=-0.002145 max=0.001983 Jy/beam ! Clean residual mean=-0.000007 rms=0.000529 Jy/beam ! Combined flux in latest and established models = 0.123087 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 43 components and 0.123087 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067211Jy sigma=0.000868 ! Fit after self-cal, rms=0.066906Jy sigma=0.000868 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066906Jy sigma=0.000868 ! Fit after self-cal, rms=0.066601Jy sigma=0.000865 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.827 mas, bmaj=5.506 mas, bpa=2.14 degrees ! Estimated noise=713.609 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000438149 Jy ! Component: 100 - total flux cleaned = 0.000471442 Jy ! Component: 150 - total flux cleaned = 0.000414002 Jy ! Component: 200 - total flux cleaned = 0.000311322 Jy ! Total flux subtracted in 200 components = 0.000311322 Jy ! Clean residual min=-0.001730 max=0.001678 Jy/beam ! Clean residual mean=-0.000003 rms=0.000418 Jy/beam ! Combined flux in latest and established models = 0.123399 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 54 components and 0.123399 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066565Jy sigma=0.000865 ! Fit after self-cal, rms=0.066583Jy sigma=0.000865 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.80613e-05 Jy ! Component: 100 - total flux cleaned = 6.56729e-05 Jy ! Component: 150 - total flux cleaned = 8.7239e-05 Jy ! Component: 200 - total flux cleaned = 8.74424e-05 Jy ! Total flux subtracted in 200 components = 8.74424e-05 Jy ! Clean residual min=-0.001748 max=0.001630 Jy/beam ! Clean residual mean=-0.000003 rms=0.000410 Jy/beam ! Combined flux in latest and established models = 0.123486 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 57 components and 0.123486 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066565Jy sigma=0.000865 ! Fit after self-cal, rms=0.066572Jy sigma=0.000865 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066572Jy sigma=0.000865 ! Fit after self-cal, rms=0.066490Jy sigma=0.000865 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.825 mas, bmaj=5.499 mas, bpa=1.902 degrees ! Estimated noise=712.333 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.87904e-05 Jy ! Component: 100 - total flux cleaned = 8.82582e-05 Jy ! Component: 150 - total flux cleaned = 8.85512e-05 Jy ! Component: 200 - total flux cleaned = 0.00010598 Jy ! Total flux subtracted in 200 components = 0.00010598 Jy ! Clean residual min=-0.001706 max=0.001593 Jy/beam ! Clean residual mean=-0.000002 rms=0.000400 Jy/beam ! Combined flux in latest and established models = 0.123592 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 62 components and 0.123592 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066477Jy sigma=0.000865 ! Fit after self-cal, rms=0.066483Jy sigma=0.000865 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.62743e-05 Jy ! Component: 100 - total flux cleaned = 7.0315e-05 Jy ! Component: 150 - total flux cleaned = 9.97475e-05 Jy ! Component: 200 - total flux cleaned = 9.94018e-05 Jy ! Total flux subtracted in 200 components = 9.94018e-05 Jy ! Clean residual min=-0.001710 max=0.001582 Jy/beam ! Clean residual mean=-0.000002 rms=0.000397 Jy/beam ! Combined flux in latest and established models = 0.123692 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 67 components and 0.123692 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066475Jy sigma=0.000865 ! Fit after self-cal, rms=0.066477Jy sigma=0.000865 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066477Jy sigma=0.000865 ! Fit after self-cal, rms=0.066379Jy sigma=0.000865 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.311 mas, bmaj=10.09 mas, bpa=7.191 degrees ! Estimated noise=842.697 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000474499 Jy ! Component: 100 - total flux cleaned = 0.000747671 Jy ! Component: 150 - total flux cleaned = 0.000880396 Jy ! Component: 200 - total flux cleaned = 0.000909217 Jy ! Total flux subtracted in 200 components = 0.000909217 Jy ! Clean residual min=-0.001423 max=0.001435 Jy/beam ! Clean residual mean=-0.000003 rms=0.000371 Jy/beam ! Combined flux in latest and established models = 0.124601 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 80 components and 0.124601 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066377Jy sigma=0.000865 ! Fit after self-cal, rms=0.066375Jy sigma=0.000865 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000127651 Jy ! Component: 100 - total flux cleaned = 0.000171338 Jy ! Component: 150 - total flux cleaned = 0.00017135 Jy ! Component: 200 - total flux cleaned = 0.000176516 Jy ! Total flux subtracted in 200 components = 0.000176516 Jy ! Clean residual min=-0.001408 max=0.001435 Jy/beam ! Clean residual mean=-0.000003 rms=0.000369 Jy/beam ! Combined flux in latest and established models = 0.124777 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 88 components and 0.124777 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066374Jy sigma=0.000865 ! Fit after self-cal, rms=0.066374Jy sigma=0.000865 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.823 mas, bmaj=5.494 mas, bpa=1.729 degrees ! Estimated noise=711.347 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.823 x 5.494 at 1.729 degrees (North through East) ! Clean map min=-0.0016009 max=0.10424 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.132 mas, bmaj=4.816 mas, bpa=1.992 degrees ! Estimated noise=1331.51 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0820532 Jy ! Component: 100 - total flux cleaned = 0.10374 Jy ! Component: 150 - total flux cleaned = 0.111754 Jy ! Component: 200 - total flux cleaned = 0.114802 Jy ! Total flux subtracted in 200 components = 0.114802 Jy ! Clean residual min=-0.004443 max=0.004011 Jy/beam ! Clean residual mean=-0.000005 rms=0.001178 Jy/beam ! Combined flux in latest and established models = 0.114802 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.114802 Jy ! Inverting map and beam ! Estimated beam: bmin=3.823 mas, bmaj=5.494 mas, bpa=1.729 degrees ! Estimated noise=711.347 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00351084 Jy ! Component: 100 - total flux cleaned = 0.00503318 Jy ! Component: 150 - total flux cleaned = 0.00578864 Jy ! Component: 200 - total flux cleaned = 0.00616893 Jy ! Total flux subtracted in 200 components = 0.00616893 Jy ! Clean residual min=-0.001840 max=0.001683 Jy/beam ! Clean residual mean=-0.000004 rms=0.000443 Jy/beam ! Combined flux in latest and established models = 0.120971 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 41 components and 0.120971 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.311 mas, bmaj=10.09 mas, bpa=7.191 degrees ! Estimated noise=842.697 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00106537 Jy ! Component: 100 - total flux cleaned = 0.0017594 Jy ! Component: 150 - total flux cleaned = 0.0022333 Jy ! Component: 200 - total flux cleaned = 0.00257951 Jy ! Total flux subtracted in 200 components = 0.00257951 Jy ! Clean residual min=-0.001474 max=0.001431 Jy/beam ! Clean residual mean=-0.000005 rms=0.000399 Jy/beam ! Combined flux in latest and established models = 0.12355 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00010386 Jy ! Component: 100 - total flux cleaned = 0.000198511 Jy ! Component: 150 - total flux cleaned = 0.000276072 Jy ! Component: 200 - total flux cleaned = 0.000321774 Jy ! Total flux subtracted in 200 components = 0.000321774 Jy ! Clean residual min=-0.001444 max=0.001408 Jy/beam ! Clean residual mean=-0.000004 rms=0.000390 Jy/beam ! Combined flux in latest and established models = 0.123872 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 74 components and 0.123872 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.823 mas, bmaj=5.494 mas, bpa=1.729 degrees ! Estimated noise=711.347 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000441627 Jy ! Component: 100 - total flux cleaned = -0.000685421 Jy ! Component: 150 - total flux cleaned = -0.000709365 Jy ! Component: 200 - total flux cleaned = -0.000730669 Jy ! Total flux subtracted in 200 components = -0.000730669 Jy ! Clean residual min=-0.001803 max=0.001656 Jy/beam ! Clean residual mean=-0.000002 rms=0.000409 Jy/beam ! Combined flux in latest and established models = 0.123142 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 85 components and 0.123142 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066387Jy sigma=0.000865 ! Fit after self-cal, rms=0.066393Jy sigma=0.000865 wmodel J1149+2824_S_2014_01_04_pus_map.mod ! Writing 85 model components to file: J1149+2824_S_2014_01_04_pus_map.mod wobs J1149+2824_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J1149+2824_S_2014_01_04_pus_uvs.fits wwins J1149+2824_S_2014_01_04_pus_map.win ! wwins: Wrote 2 windows to J1149+2824_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000392355 Jy ! Component: 100 - total flux cleaned = -0.000673558 Jy ! Component: 150 - total flux cleaned = -0.000829435 Jy ! Component: 200 - total flux cleaned = -0.00107862 Jy ! Component: 250 - total flux cleaned = -0.00127061 Jy ! Component: 300 - total flux cleaned = -0.00145645 Jy ! Component: 350 - total flux cleaned = -0.00166022 Jy ! Component: 400 - total flux cleaned = -0.00192539 Jy ! Component: 450 - total flux cleaned = -0.00216264 Jy ! Component: 500 - total flux cleaned = -0.00239391 Jy ! Component: 550 - total flux cleaned = -0.00262002 Jy ! Component: 600 - total flux cleaned = -0.00282084 Jy ! Component: 650 - total flux cleaned = -0.00303684 Jy ! Component: 700 - total flux cleaned = -0.00322906 Jy ! Component: 750 - total flux cleaned = -0.00337967 Jy ! Component: 800 - total flux cleaned = -0.00350848 Jy ! Component: 850 - total flux cleaned = -0.00365272 Jy ! Component: 900 - total flux cleaned = -0.00372351 Jy ! Component: 950 - total flux cleaned = -0.00382801 Jy ! Component: 1000 - total flux cleaned = -0.0039306 Jy ! Component: 1050 - total flux cleaned = -0.00404811 Jy ! Component: 1100 - total flux cleaned = -0.00406481 Jy ! Component: 1150 - total flux cleaned = -0.00416251 Jy ! Component: 1200 - total flux cleaned = -0.0041944 Jy ! Component: 1250 - total flux cleaned = -0.00421026 Jy ! Component: 1300 - total flux cleaned = -0.00425686 Jy ! Component: 1350 - total flux cleaned = -0.00433359 Jy ! Component: 1400 - total flux cleaned = -0.00433354 Jy ! Component: 1450 - total flux cleaned = -0.00433332 Jy ! Component: 1500 - total flux cleaned = -0.00437745 Jy ! Component: 1550 - total flux cleaned = -0.00433372 Jy ! Component: 1600 - total flux cleaned = -0.00434837 Jy ! Component: 1650 - total flux cleaned = -0.00433407 Jy ! Component: 1700 - total flux cleaned = -0.00431998 Jy ! Component: 1750 - total flux cleaned = -0.00431998 Jy ! Component: 1800 - total flux cleaned = -0.00427864 Jy ! Component: 1850 - total flux cleaned = -0.0042516 Jy ! Component: 1900 - total flux cleaned = -0.00427842 Jy ! Component: 1950 - total flux cleaned = -0.00425153 Jy ! Component: 2000 - total flux cleaned = -0.00422544 Jy ! Component: 2050 - total flux cleaned = -0.00425156 Jy ! Component: 2100 - total flux cleaned = -0.00425154 Jy ! Component: 2150 - total flux cleaned = -0.00425146 Jy ! Component: 2200 - total flux cleaned = -0.00425155 Jy ! Component: 2250 - total flux cleaned = -0.00427653 Jy ! Component: 2300 - total flux cleaned = -0.00428876 Jy ! Component: 2350 - total flux cleaned = -0.00431314 Jy ! Component: 2400 - total flux cleaned = -0.00432522 Jy ! Component: 2450 - total flux cleaned = -0.00431312 Jy ! Component: 2500 - total flux cleaned = -0.00437253 Jy ! Component: 2550 - total flux cleaned = -0.00437243 Jy ! Component: 2600 - total flux cleaned = -0.00436074 Jy ! Component: 2650 - total flux cleaned = -0.00438399 Jy ! Component: 2700 - total flux cleaned = -0.00434954 Jy ! Component: 2750 - total flux cleaned = -0.00438381 Jy ! Component: 2800 - total flux cleaned = -0.00439524 Jy ! Component: 2850 - total flux cleaned = -0.00440638 Jy ! Component: 2900 - total flux cleaned = -0.00439525 Jy ! Component: 2950 - total flux cleaned = -0.00439535 Jy ! Component: 3000 - total flux cleaned = -0.0044393 Jy ! Component: 3050 - total flux cleaned = -0.00441748 Jy ! Component: 3100 - total flux cleaned = -0.00441746 Jy ! Component: 3150 - total flux cleaned = -0.00442828 Jy ! Component: 3200 - total flux cleaned = -0.00443899 Jy ! Component: 3250 - total flux cleaned = -0.004439 Jy ! Component: 3300 - total flux cleaned = -0.00450235 Jy ! Component: 3350 - total flux cleaned = -0.00451277 Jy ! Component: 3400 - total flux cleaned = -0.00452324 Jy ! Component: 3450 - total flux cleaned = -0.00455433 Jy ! Component: 3500 - total flux cleaned = -0.00456462 Jy ! Component: 3550 - total flux cleaned = -0.00459535 Jy ! Component: 3600 - total flux cleaned = -0.00458524 Jy ! Component: 3650 - total flux cleaned = -0.00464602 Jy ! Component: 3700 - total flux cleaned = -0.004646 Jy ! Component: 3750 - total flux cleaned = -0.00467607 Jy ! Component: 3800 - total flux cleaned = -0.00469592 Jy ! Component: 3850 - total flux cleaned = -0.00470581 Jy ! Component: 3900 - total flux cleaned = -0.00471566 Jy ! Component: 3950 - total flux cleaned = -0.00473527 Jy ! Component: 4000 - total flux cleaned = -0.00477438 Jy ! Component: 4050 - total flux cleaned = -0.00478415 Jy ! Total flux subtracted in 4096 components = -0.0048229 Jy ! Clean residual min=-0.000490 max=0.000589 Jy/beam ! Clean residual mean=-0.000000 rms=0.000163 Jy/beam ! Combined flux in latest and established models = 0.118319 Jy keep ! Adding 231 model components to the UV plane model. ! The established model now contains 316 components and 0.118319 Jy ![Exited script file: muppet] wmap "J1149+2824_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.823 x 5.494 at 1.729 degrees (North through East) ! Clean map min=-0.0011898 max=0.10484 Jy/beam ! Writing clean map to FITS file: J1149+2824_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.104841 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000159484 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.456362 0.456362 0.912724 1.82545 3.65089 7.30179 14.6036 29.2072 58.4143 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.104 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.823 x 5.494 at 1.729 degrees (North through East) ! Clean map min=-0.0011898 max=0.10484 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1149+2824_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:25:56 2017