! Started logfile: J1148+5254_S_2014_08_05_pus_uvs.log on Sun Nov 13 17:25:58 2016 obs J1148+5254_S_2014_08_05_pus_uva.fits ! Reading UV FITS file: J1148+5254_S_2014_08_05_pus_uva.fits ! AN table 1: 122 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.618944 visibilities/baseline/integration-bin. ! Found source: J1148+5254 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 360 lines of history. ! ! Reading 13592 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1148+5254_S_2014_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 256 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 256 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 256 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 256 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.818188Jy sigma=0.009272 ! Fit after self-cal, rms=0.776534Jy sigma=0.008853 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.359 mas, bmaj=7.686 mas, bpa=45.73 degrees ! Estimated noise=1158.66 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.172067 Jy ! Component: 100 - total flux cleaned = 0.209613 Jy ! Total flux subtracted in 100 components = 0.209613 Jy ! Clean residual min=-0.006935 max=0.011282 Jy/beam ! Clean residual mean=-0.000030 rms=0.001925 Jy/beam ! Combined flux in latest and established models = 0.209613 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.209613 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083841Jy sigma=0.000861 ! Fit after self-cal, rms=0.083835Jy sigma=0.000861 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.363 mas, bmaj=8.263 mas, bpa=44.87 degrees ! Estimated noise=544.154 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0150015 Jy ! Component: 100 - total flux cleaned = 0.0230701 Jy ! Component: 150 - total flux cleaned = 0.0280325 Jy ! Component: 200 - total flux cleaned = 0.0312958 Jy ! Total flux subtracted in 200 components = 0.0312958 Jy ! Clean residual min=-0.005077 max=0.006454 Jy/beam ! Clean residual mean=-0.000007 rms=0.001282 Jy/beam ! Combined flux in latest and established models = 0.240909 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 32 components and 0.240909 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080315Jy sigma=0.000836 ! Fit after self-cal, rms=0.080291Jy sigma=0.000835 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.85 HN 0.99 KP 1.06 ! LA 1.15 MK 1.00* NL 1.03 OV 1.00 ! PT 1.05 SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.05 HN 1.03 KP 1.03 ! LA 1.11 MK 1.00* NL 1.04 OV 1.02 ! PT 1.01 SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.15 HN 1.01 KP 0.90 ! LA 0.83 MK 1.00* NL 1.02 OV 0.95 ! PT 1.00 SC 1.05 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.98 HN 0.99 KP 0.85 ! LA 0.79 MK 1.00* NL 1.07 OV 0.97 ! PT 1.01 SC 0.97 ! ! ! Fit before self-cal, rms=0.080291Jy sigma=0.000835 ! Fit after self-cal, rms=0.072611Jy sigma=0.000781 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.385 mas, bmaj=8.266 mas, bpa=44.86 degrees ! Estimated noise=540.91 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (8.5, -3.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0034242 Jy ! Component: 100 - total flux cleaned = 0.00402978 Jy ! Component: 150 - total flux cleaned = 0.00409414 Jy ! Component: 200 - total flux cleaned = 0.00428135 Jy ! Total flux subtracted in 200 components = 0.00428135 Jy ! Clean residual min=-0.002040 max=0.002437 Jy/beam ! Clean residual mean=0.000012 rms=0.000609 Jy/beam ! Combined flux in latest and established models = 0.24519 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 47 components and 0.24519 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072333Jy sigma=0.000778 ! Fit after self-cal, rms=0.072311Jy sigma=0.000777 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072311Jy sigma=0.000777 ! Fit after self-cal, rms=0.071538Jy sigma=0.000775 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.375 mas, bmaj=8.293 mas, bpa=44.79 degrees ! Estimated noise=539.922 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.92364e-05 Jy ! Component: 100 - total flux cleaned = -0.000328686 Jy ! Component: 150 - total flux cleaned = -0.000500528 Jy ! Component: 200 - total flux cleaned = -0.000638598 Jy ! Total flux subtracted in 200 components = -0.000638598 Jy ! Clean residual min=-0.001837 max=0.001759 Jy/beam ! Clean residual mean=-0.000001 rms=0.000401 Jy/beam ! Combined flux in latest and established models = 0.244551 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 73 components and 0.244551 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071506Jy sigma=0.000775 ! Fit after self-cal, rms=0.071493Jy sigma=0.000774 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000203683 Jy ! Component: 100 - total flux cleaned = -0.000258187 Jy ! Component: 150 - total flux cleaned = -0.000241726 Jy ! Component: 200 - total flux cleaned = -0.000241663 Jy ! Total flux subtracted in 200 components = -0.000241663 Jy ! Clean residual min=-0.001843 max=0.001643 Jy/beam ! Clean residual mean=-0.000002 rms=0.000393 Jy/beam ! Combined flux in latest and established models = 0.24431 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 85 components and 0.24431 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071485Jy sigma=0.000774 ! Fit after self-cal, rms=0.071484Jy sigma=0.000774 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071484Jy sigma=0.000774 ! Fit after self-cal, rms=0.071410Jy sigma=0.000774 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.376 mas, bmaj=8.303 mas, bpa=44.77 degrees ! Estimated noise=539.474 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00029938 Jy ! Component: 100 - total flux cleaned = -0.000506968 Jy ! Component: 150 - total flux cleaned = -0.000580997 Jy ! Component: 200 - total flux cleaned = -0.000621007 Jy ! Total flux subtracted in 200 components = -0.000621007 Jy ! Clean residual min=-0.001779 max=0.001501 Jy/beam ! Clean residual mean=-0.000003 rms=0.000377 Jy/beam ! Combined flux in latest and established models = 0.243689 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 100 components and 0.243689 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071402Jy sigma=0.000774 ! Fit after self-cal, rms=0.071400Jy sigma=0.000774 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.68719e-05 Jy ! Component: 100 - total flux cleaned = -1.04142e-05 Jy ! Component: 150 - total flux cleaned = -1.09651e-05 Jy ! Component: 200 - total flux cleaned = -1.71459e-07 Jy ! Total flux subtracted in 200 components = -1.71459e-07 Jy ! Clean residual min=-0.001771 max=0.001500 Jy/beam ! Clean residual mean=-0.000003 rms=0.000373 Jy/beam ! Combined flux in latest and established models = 0.243689 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 111 components and 0.243689 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071397Jy sigma=0.000774 ! Fit after self-cal, rms=0.071396Jy sigma=0.000774 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071396Jy sigma=0.000774 ! Fit after self-cal, rms=0.071368Jy sigma=0.000774 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.099 mas, bmaj=10.19 mas, bpa=55.61 degrees ! Estimated noise=625.498 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000284734 Jy ! Component: 100 - total flux cleaned = -0.000283024 Jy ! Component: 150 - total flux cleaned = -0.000293432 Jy ! Component: 200 - total flux cleaned = -0.000311589 Jy ! Total flux subtracted in 200 components = -0.000311589 Jy ! Clean residual min=-0.001672 max=0.001471 Jy/beam ! Clean residual mean=-0.000005 rms=0.000391 Jy/beam ! Combined flux in latest and established models = 0.243377 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 122 components and 0.243377 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071366Jy sigma=0.000774 ! Fit after self-cal, rms=0.071364Jy sigma=0.000774 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.92974e-05 Jy ! Component: 100 - total flux cleaned = 3.93127e-05 Jy ! Component: 150 - total flux cleaned = 5.50635e-05 Jy ! Component: 200 - total flux cleaned = 6.23415e-05 Jy ! Total flux subtracted in 200 components = 6.23415e-05 Jy ! Clean residual min=-0.001642 max=0.001463 Jy/beam ! Clean residual mean=-0.000005 rms=0.000389 Jy/beam ! Combined flux in latest and established models = 0.243439 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 131 components and 0.243439 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071364Jy sigma=0.000774 ! Fit after self-cal, rms=0.071363Jy sigma=0.000774 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.379 mas, bmaj=8.309 mas, bpa=44.76 degrees ! Estimated noise=539.228 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.379 x 8.309 at 44.76 degrees (North through East) ! Clean map min=-0.0016506 max=0.22077 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.35 mas, bmaj=7.706 mas, bpa=45.57 degrees ! Estimated noise=1144.21 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.169914 Jy ! Component: 100 - total flux cleaned = 0.207119 Jy ! Component: 150 - total flux cleaned = 0.219915 Jy ! Component: 200 - total flux cleaned = 0.227158 Jy ! Total flux subtracted in 200 components = 0.227158 Jy ! Clean residual min=-0.004521 max=0.003996 Jy/beam ! Clean residual mean=-0.000017 rms=0.001116 Jy/beam ! Combined flux in latest and established models = 0.227158 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.227158 Jy ! Inverting map and beam ! Estimated beam: bmin=4.379 mas, bmaj=8.309 mas, bpa=44.76 degrees ! Estimated noise=539.228 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00620406 Jy ! Component: 100 - total flux cleaned = 0.00946126 Jy ! Component: 150 - total flux cleaned = 0.0115767 Jy ! Component: 200 - total flux cleaned = 0.0131033 Jy ! Total flux subtracted in 200 components = 0.0131033 Jy ! Clean residual min=-0.001813 max=0.001500 Jy/beam ! Clean residual mean=-0.000010 rms=0.000417 Jy/beam ! Combined flux in latest and established models = 0.240261 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 54 components and 0.240261 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.099 mas, bmaj=10.19 mas, bpa=55.61 degrees ! Estimated noise=625.498 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00139926 Jy ! Component: 100 - total flux cleaned = 0.00222523 Jy ! Component: 150 - total flux cleaned = 0.00240482 Jy ! Component: 200 - total flux cleaned = 0.00253272 Jy ! Total flux subtracted in 200 components = 0.00253272 Jy ! Clean residual min=-0.001706 max=0.001420 Jy/beam ! Clean residual mean=-0.000007 rms=0.000392 Jy/beam ! Combined flux in latest and established models = 0.242794 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.31657e-05 Jy ! Component: 100 - total flux cleaned = 0.000104331 Jy ! Component: 150 - total flux cleaned = 0.000132734 Jy ! Component: 200 - total flux cleaned = 0.000181679 Jy ! Total flux subtracted in 200 components = 0.000181679 Jy ! Clean residual min=-0.001679 max=0.001383 Jy/beam ! Clean residual mean=-0.000006 rms=0.000389 Jy/beam ! Combined flux in latest and established models = 0.242976 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 96 components and 0.242976 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.379 mas, bmaj=8.309 mas, bpa=44.76 degrees ! Estimated noise=539.228 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000101441 Jy ! Component: 100 - total flux cleaned = 5.82404e-05 Jy ! Component: 150 - total flux cleaned = 3.87563e-05 Jy ! Component: 200 - total flux cleaned = 7.22885e-05 Jy ! Total flux subtracted in 200 components = 7.22885e-05 Jy ! Clean residual min=-0.001712 max=0.001538 Jy/beam ! Clean residual mean=-0.000003 rms=0.000377 Jy/beam ! Combined flux in latest and established models = 0.243048 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 117 components and 0.243048 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071378Jy sigma=0.000774 ! Fit after self-cal, rms=0.071376Jy sigma=0.000774 wmodel J1148+5254_S_2014_08_05_pus_map.mod ! Writing 117 model components to file: J1148+5254_S_2014_08_05_pus_map.mod wobs J1148+5254_S_2014_08_05_pus_uvs.fits ! Writing UV FITS file: J1148+5254_S_2014_08_05_pus_uvs.fits wwins J1148+5254_S_2014_08_05_pus_map.win ! wwins: Wrote 2 windows to J1148+5254_S_2014_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 4.17377e-06 Jy ! Component: 100 - total flux cleaned = 0.000182133 Jy ! Component: 150 - total flux cleaned = 0.000348907 Jy ! Component: 200 - total flux cleaned = 0.000530764 Jy ! Component: 250 - total flux cleaned = 0.000704834 Jy ! Component: 300 - total flux cleaned = 0.000892608 Jy ! Component: 350 - total flux cleaned = 0.00105335 Jy ! Component: 400 - total flux cleaned = 0.00118932 Jy ! Component: 450 - total flux cleaned = 0.00124548 Jy ! Component: 500 - total flux cleaned = 0.00130072 Jy ! Component: 550 - total flux cleaned = 0.00131891 Jy ! Component: 600 - total flux cleaned = 0.00133653 Jy ! Component: 650 - total flux cleaned = 0.00131966 Jy ! Component: 700 - total flux cleaned = 0.00133642 Jy ! Component: 750 - total flux cleaned = 0.00136912 Jy ! Component: 800 - total flux cleaned = 0.00138507 Jy ! Component: 850 - total flux cleaned = 0.00140073 Jy ! Component: 900 - total flux cleaned = 0.00141612 Jy ! Component: 950 - total flux cleaned = 0.00144606 Jy ! Component: 1000 - total flux cleaned = 0.00144624 Jy ! Component: 1050 - total flux cleaned = 0.0014903 Jy ! Component: 1100 - total flux cleaned = 0.00151866 Jy ! Component: 1150 - total flux cleaned = 0.00154667 Jy ! Component: 1200 - total flux cleaned = 0.00154671 Jy ! Component: 1250 - total flux cleaned = 0.00157364 Jy ! Component: 1300 - total flux cleaned = 0.0015602 Jy ! Component: 1350 - total flux cleaned = 0.00156011 Jy ! Component: 1400 - total flux cleaned = 0.00150812 Jy ! Component: 1450 - total flux cleaned = 0.00149562 Jy ! Component: 1500 - total flux cleaned = 0.00149565 Jy ! Component: 1550 - total flux cleaned = 0.00152065 Jy ! Component: 1600 - total flux cleaned = 0.00150832 Jy ! Component: 1650 - total flux cleaned = 0.00150825 Jy ! Component: 1700 - total flux cleaned = 0.00150838 Jy ! Component: 1750 - total flux cleaned = 0.0015085 Jy ! Component: 1800 - total flux cleaned = 0.00148527 Jy ! Component: 1850 - total flux cleaned = 0.00146251 Jy ! Component: 1900 - total flux cleaned = 0.00150802 Jy ! Component: 1950 - total flux cleaned = 0.00149671 Jy ! Component: 2000 - total flux cleaned = 0.00147445 Jy ! Component: 2050 - total flux cleaned = 0.00147429 Jy ! Component: 2100 - total flux cleaned = 0.00146345 Jy ! Component: 2150 - total flux cleaned = 0.00143123 Jy ! Component: 2200 - total flux cleaned = 0.00144182 Jy ! Component: 2250 - total flux cleaned = 0.00141014 Jy ! Component: 2300 - total flux cleaned = 0.0014101 Jy ! Component: 2350 - total flux cleaned = 0.00139976 Jy ! Component: 2400 - total flux cleaned = 0.00136925 Jy ! Component: 2450 - total flux cleaned = 0.00135927 Jy ! Component: 2500 - total flux cleaned = 0.00137943 Jy ! Component: 2550 - total flux cleaned = 0.00134983 Jy ! Component: 2600 - total flux cleaned = 0.00132051 Jy ! Component: 2650 - total flux cleaned = 0.00134 Jy ! Component: 2700 - total flux cleaned = 0.00128224 Jy ! Component: 2750 - total flux cleaned = 0.0012918 Jy ! Component: 2800 - total flux cleaned = 0.00125406 Jy ! Component: 2850 - total flux cleaned = 0.00123545 Jy ! Component: 2900 - total flux cleaned = 0.00120767 Jy ! Component: 2950 - total flux cleaned = 0.00119863 Jy ! Component: 3000 - total flux cleaned = 0.00120763 Jy ! Component: 3050 - total flux cleaned = 0.00117159 Jy ! Component: 3100 - total flux cleaned = 0.001145 Jy ! Component: 3150 - total flux cleaned = 0.00116281 Jy ! Component: 3200 - total flux cleaned = 0.00113659 Jy ! Component: 3250 - total flux cleaned = 0.00114533 Jy ! Component: 3300 - total flux cleaned = 0.00113675 Jy ! Component: 3350 - total flux cleaned = 0.00111973 Jy ! Component: 3400 - total flux cleaned = 0.0011283 Jy ! Component: 3450 - total flux cleaned = 0.00115362 Jy ! Component: 3500 - total flux cleaned = 0.00112025 Jy ! Component: 3550 - total flux cleaned = 0.00110372 Jy ! Component: 3600 - total flux cleaned = 0.0010873 Jy ! Component: 3650 - total flux cleaned = 0.00112808 Jy ! Component: 3700 - total flux cleaned = 0.00109565 Jy ! Component: 3750 - total flux cleaned = 0.00110366 Jy ! Component: 3800 - total flux cleaned = 0.00108773 Jy ! Component: 3850 - total flux cleaned = 0.00107984 Jy ! Component: 3900 - total flux cleaned = 0.00104854 Jy ! Component: 3950 - total flux cleaned = 0.00107964 Jy ! Component: 4000 - total flux cleaned = 0.00107182 Jy ! Component: 4050 - total flux cleaned = 0.0010795 Jy ! Total flux subtracted in 4096 components = 0.00103374 Jy ! Clean residual min=-0.000438 max=0.000504 Jy/beam ! Clean residual mean=0.000000 rms=0.000138 Jy/beam ! Combined flux in latest and established models = 0.244082 Jy keep ! Adding 272 model components to the UV plane model. ! The established model now contains 389 components and 0.244082 Jy ![Exited script file: muppet] wmap "J1148+5254_S_2014_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.379 x 8.309 at 44.76 degrees (North through East) ! Clean map min=-0.0010879 max=0.2207 Jy/beam ! Writing clean map to FITS file: J1148+5254_S_2014_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.220696 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000136396 device "J1148+5254_S_2014_08_05_pus\_map.eps/VPS" ! Attempting to open device: 'J1148+5254_S_2014_08_05_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.185409 0.185409 0.370817 0.741635 1.48327 2.96654 5.93308 11.8662 23.7323 47.4646 94.9292 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.22 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.379 x 8.309 at 44.76 degrees (North through East) ! Clean map min=-0.0010879 max=0.2207 Jy/beam quit ! Quitting program ! Log file J1148+5254_S_2014_08_05_pus_uvs.log closed on Sun Nov 13 17:26:04 2016