! Started logfile: J1146+0458_S_2015_01_22_pus_uvs.log on Tue Jan 3 22:52:01 2017 obs J1146+0458_S_2015_01_22_pus_uva.fits ! Reading UV FITS file: J1146+0458_S_2015_01_22_pus_uva.fits ! AN table 1: 63 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.622222 visibilities/baseline/integration-bin. ! Found source: J1146+0458 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 281 lines of history. ! ! Reading 7056 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1146+0458_S_2015_01_22_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 126 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 126 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 126 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 126 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.942274Jy sigma=0.010856 ! Fit after self-cal, rms=0.917102Jy sigma=0.010629 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.156 mas, bmaj=12.14 mas, bpa=-28.02 degrees ! Estimated noise=1186.02 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0633759 Jy ! Component: 100 - total flux cleaned = 0.0785895 Jy ! Total flux subtracted in 100 components = 0.0785895 Jy ! Clean residual min=-0.007506 max=0.008837 Jy/beam ! Clean residual mean=-0.000084 rms=0.002135 Jy/beam ! Combined flux in latest and established models = 0.0785895 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.0785895 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082263Jy sigma=0.000811 ! Fit after self-cal, rms=0.082243Jy sigma=0.000811 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.967 mas, bmaj=11.74 mas, bpa=-26.6 degrees ! Estimated noise=753.209 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0107852 Jy ! Component: 100 - total flux cleaned = 0.0168642 Jy ! Component: 150 - total flux cleaned = 0.0208275 Jy ! Component: 200 - total flux cleaned = 0.0235105 Jy ! Total flux subtracted in 200 components = 0.0235105 Jy ! Clean residual min=-0.005053 max=0.006817 Jy/beam ! Clean residual mean=-0.000102 rms=0.001608 Jy/beam ! Combined flux in latest and established models = 0.1021 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 41 components and 0.1021 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080627Jy sigma=0.000793 ! Fit after self-cal, rms=0.080587Jy sigma=0.000792 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.00* HN 1.00 KP 0.99 ! LA 1.04 MK 1.02 NL 1.18 OV 0.95 ! PT 1.02 SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00* HN 1.09 KP 0.96 ! LA 1.04 MK 1.05 NL 1.34 OV 0.98 ! PT 1.01 SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.00* HN 1.05 KP 0.85 ! LA 0.76 MK 1.06 NL 1.38 OV 0.93 ! PT 0.94 SC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.00* HN 0.98 KP 0.78 ! LA 0.85 MK 0.97 NL 0.87 OV 0.96 ! PT 1.02 SC 1.00* ! ! ! Fit before self-cal, rms=0.080587Jy sigma=0.000792 ! Fit after self-cal, rms=0.077162Jy sigma=0.000775 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.028 mas, bmaj=11.62 mas, bpa=-26.33 degrees ! Estimated noise=750.587 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000472948 Jy ! Component: 100 - total flux cleaned = -0.000740248 Jy ! Component: 150 - total flux cleaned = -0.000991365 Jy ! Component: 200 - total flux cleaned = -0.00116675 Jy ! Total flux subtracted in 200 components = -0.00116675 Jy ! Clean residual min=-0.003346 max=0.004477 Jy/beam ! Clean residual mean=-0.000070 rms=0.000954 Jy/beam ! Combined flux in latest and established models = 0.100933 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 53 components and 0.100933 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077084Jy sigma=0.000774 ! Fit after self-cal, rms=0.077089Jy sigma=0.000773 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077089Jy sigma=0.000773 ! Fit after self-cal, rms=0.077972Jy sigma=0.000773 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.035 mas, bmaj=11.56 mas, bpa=-26.29 degrees ! Estimated noise=752.076 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000755202 Jy ! Component: 100 - total flux cleaned = -0.00083452 Jy ! Component: 150 - total flux cleaned = -0.000994773 Jy ! Component: 200 - total flux cleaned = -0.0011374 Jy ! Total flux subtracted in 200 components = -0.0011374 Jy ! Clean residual min=-0.003169 max=0.004197 Jy/beam ! Clean residual mean=-0.000069 rms=0.000919 Jy/beam ! Combined flux in latest and established models = 0.0997959 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 62 components and 0.0997959 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077923Jy sigma=0.000772 ! Fit after self-cal, rms=0.077948Jy sigma=0.000772 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-15.5, -6.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00391518 Jy ! Component: 100 - total flux cleaned = 0.00620672 Jy ! Component: 150 - total flux cleaned = 0.00720388 Jy ! Component: 200 - total flux cleaned = 0.00772592 Jy ! Total flux subtracted in 200 components = 0.00772592 Jy ! Clean residual min=-0.002403 max=0.001978 Jy/beam ! Clean residual mean=-0.000032 rms=0.000629 Jy/beam ! Combined flux in latest and established models = 0.107522 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 101 components and 0.107522 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077712Jy sigma=0.000770 ! Fit after self-cal, rms=0.077699Jy sigma=0.000769 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077699Jy sigma=0.000769 ! Fit after self-cal, rms=0.077861Jy sigma=0.000769 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.045 mas, bmaj=11.52 mas, bpa=-26.25 degrees ! Estimated noise=746.592 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000646106 Jy ! Component: 100 - total flux cleaned = 0.000739522 Jy ! Component: 150 - total flux cleaned = 0.000817069 Jy ! Component: 200 - total flux cleaned = 0.0009191 Jy ! Total flux subtracted in 200 components = 0.0009191 Jy ! Clean residual min=-0.002128 max=0.001882 Jy/beam ! Clean residual mean=-0.000021 rms=0.000545 Jy/beam ! Combined flux in latest and established models = 0.108441 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 121 components and 0.108441 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077806Jy sigma=0.000769 ! Fit after self-cal, rms=0.077826Jy sigma=0.000769 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000305977 Jy ! Component: 100 - total flux cleaned = 0.00045054 Jy ! Component: 150 - total flux cleaned = 0.000552764 Jy ! Component: 200 - total flux cleaned = 0.000646564 Jy ! Total flux subtracted in 200 components = 0.000646564 Jy ! Clean residual min=-0.002062 max=0.001904 Jy/beam ! Clean residual mean=-0.000020 rms=0.000532 Jy/beam ! Combined flux in latest and established models = 0.109087 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 128 components and 0.109087 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077803Jy sigma=0.000769 ! Fit after self-cal, rms=0.077807Jy sigma=0.000769 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077807Jy sigma=0.000769 ! Fit after self-cal, rms=0.077793Jy sigma=0.000768 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.076 mas, bmaj=12.26 mas, bpa=-10.02 degrees ! Estimated noise=877.364 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000563231 Jy ! Component: 100 - total flux cleaned = -0.000538386 Jy ! Component: 150 - total flux cleaned = -0.000537999 Jy ! Component: 200 - total flux cleaned = -0.000518564 Jy ! Total flux subtracted in 200 components = -0.000518564 Jy ! Clean residual min=-0.002205 max=0.002302 Jy/beam ! Clean residual mean=-0.000025 rms=0.000667 Jy/beam ! Combined flux in latest and established models = 0.108569 Jy selfcal ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 155 components and 0.108569 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077774Jy sigma=0.000768 ! Fit after self-cal, rms=0.077780Jy sigma=0.000768 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.89455e-05 Jy ! Component: 100 - total flux cleaned = 0.000162254 Jy ! Component: 150 - total flux cleaned = 0.000194469 Jy ! Component: 200 - total flux cleaned = 0.000225111 Jy ! Total flux subtracted in 200 components = 0.000225111 Jy ! Clean residual min=-0.002180 max=0.002280 Jy/beam ! Clean residual mean=-0.000025 rms=0.000664 Jy/beam ! Combined flux in latest and established models = 0.108794 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 181 components and 0.108794 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077772Jy sigma=0.000768 ! Fit after self-cal, rms=0.077775Jy sigma=0.000768 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.049 mas, bmaj=11.52 mas, bpa=-26.23 degrees ! Estimated noise=743.725 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.049 x 11.52 at -26.23 degrees (North through East) ! Clean map min=-0.0019812 max=0.07981 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.198 mas, bmaj=11.89 mas, bpa=-27.74 degrees ! Estimated noise=1176.57 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0626912 Jy ! Component: 100 - total flux cleaned = 0.0777219 Jy ! Component: 150 - total flux cleaned = 0.0849991 Jy ! Component: 200 - total flux cleaned = 0.0896773 Jy ! Total flux subtracted in 200 components = 0.0896773 Jy ! Clean residual min=-0.004251 max=0.004033 Jy/beam ! Clean residual mean=-0.000044 rms=0.001218 Jy/beam ! Combined flux in latest and established models = 0.0896773 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.0896773 Jy ! Inverting map and beam ! Estimated beam: bmin=4.049 mas, bmaj=11.52 mas, bpa=-26.23 degrees ! Estimated noise=743.725 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0049288 Jy ! Component: 100 - total flux cleaned = 0.00800282 Jy ! Component: 150 - total flux cleaned = 0.0102895 Jy ! Component: 200 - total flux cleaned = 0.012069 Jy ! Total flux subtracted in 200 components = 0.012069 Jy ! Clean residual min=-0.002624 max=0.002137 Jy/beam ! Clean residual mean=-0.000047 rms=0.000644 Jy/beam ! Combined flux in latest and established models = 0.101746 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 53 components and 0.101746 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.076 mas, bmaj=12.26 mas, bpa=-10.02 degrees ! Estimated noise=877.364 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00192137 Jy ! Component: 100 - total flux cleaned = 0.0033972 Jy ! Component: 150 - total flux cleaned = 0.00457731 Jy ! Component: 200 - total flux cleaned = 0.00545817 Jy ! Total flux subtracted in 200 components = 0.00545817 Jy ! Clean residual min=-0.002621 max=0.002338 Jy/beam ! Clean residual mean=-0.000036 rms=0.000740 Jy/beam ! Combined flux in latest and established models = 0.107204 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000200183 Jy ! Component: 100 - total flux cleaned = 0.000354052 Jy ! Component: 150 - total flux cleaned = 0.000497389 Jy ! Component: 200 - total flux cleaned = 0.000578454 Jy ! Total flux subtracted in 200 components = 0.000578454 Jy ! Clean residual min=-0.002457 max=0.002362 Jy/beam ! Clean residual mean=-0.000032 rms=0.000705 Jy/beam ! Combined flux in latest and established models = 0.107783 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 102 components and 0.107783 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.049 mas, bmaj=11.52 mas, bpa=-26.23 degrees ! Estimated noise=743.725 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000273103 Jy ! Component: 100 - total flux cleaned = 0.000355271 Jy ! Component: 150 - total flux cleaned = 0.00042883 Jy ! Component: 200 - total flux cleaned = 0.000496111 Jy ! Total flux subtracted in 200 components = 0.000496111 Jy ! Clean residual min=-0.002130 max=0.001899 Jy/beam ! Clean residual mean=-0.000017 rms=0.000510 Jy/beam ! Combined flux in latest and established models = 0.108279 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 123 components and 0.108279 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077782Jy sigma=0.000768 ! Fit after self-cal, rms=0.077772Jy sigma=0.000768 wmodel J1146+0458_S_2015_01_22_pus_map.mod ! Writing 123 model components to file: J1146+0458_S_2015_01_22_pus_map.mod wobs J1146+0458_S_2015_01_22_pus_uvs.fits ! Writing UV FITS file: J1146+0458_S_2015_01_22_pus_uvs.fits wwins J1146+0458_S_2015_01_22_pus_map.win ! wwins: Wrote 2 windows to J1146+0458_S_2015_01_22_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000491374 Jy ! Component: 100 - total flux cleaned = -0.000733277 Jy ! Component: 150 - total flux cleaned = -0.00101033 Jy ! Component: 200 - total flux cleaned = -0.00111359 Jy ! Component: 250 - total flux cleaned = -0.00123443 Jy ! Component: 300 - total flux cleaned = -0.00134856 Jy ! Component: 350 - total flux cleaned = -0.00141377 Jy ! Component: 400 - total flux cleaned = -0.00147553 Jy ! Component: 450 - total flux cleaned = -0.001535 Jy ! Component: 500 - total flux cleaned = -0.0016667 Jy ! Component: 550 - total flux cleaned = -0.00173886 Jy ! Component: 600 - total flux cleaned = -0.00184281 Jy ! Component: 650 - total flux cleaned = -0.00187664 Jy ! Component: 700 - total flux cleaned = -0.00197436 Jy ! Component: 750 - total flux cleaned = -0.00199007 Jy ! Component: 800 - total flux cleaned = -0.00200574 Jy ! Component: 850 - total flux cleaned = -0.00202107 Jy ! Component: 900 - total flux cleaned = -0.00205032 Jy ! Component: 950 - total flux cleaned = -0.00209285 Jy ! Component: 1000 - total flux cleaned = -0.00207883 Jy ! Component: 1050 - total flux cleaned = -0.00215974 Jy ! Component: 1100 - total flux cleaned = -0.00217269 Jy ! Component: 1150 - total flux cleaned = -0.0022498 Jy ! Component: 1200 - total flux cleaned = -0.00228716 Jy ! Component: 1250 - total flux cleaned = -0.00233631 Jy ! Component: 1300 - total flux cleaned = -0.00237264 Jy ! Component: 1350 - total flux cleaned = -0.00242008 Jy ! Component: 1400 - total flux cleaned = -0.00246628 Jy ! Component: 1450 - total flux cleaned = -0.00247763 Jy ! Component: 1500 - total flux cleaned = -0.002511 Jy ! Component: 1550 - total flux cleaned = -0.00250022 Jy ! Component: 1600 - total flux cleaned = -0.00251091 Jy ! Component: 1650 - total flux cleaned = -0.00253183 Jy ! Component: 1700 - total flux cleaned = -0.00253176 Jy ! Component: 1750 - total flux cleaned = -0.00254178 Jy ! Component: 1800 - total flux cleaned = -0.00254179 Jy ! Component: 1850 - total flux cleaned = -0.0025515 Jy ! Component: 1900 - total flux cleaned = -0.00255163 Jy ! Component: 1950 - total flux cleaned = -0.00257991 Jy ! Component: 2000 - total flux cleaned = -0.00254226 Jy ! Component: 2050 - total flux cleaned = -0.00252387 Jy ! Component: 2100 - total flux cleaned = -0.00253301 Jy ! Component: 2150 - total flux cleaned = -0.00253298 Jy ! Component: 2200 - total flux cleaned = -0.0024974 Jy ! Component: 2250 - total flux cleaned = -0.0024887 Jy ! Component: 2300 - total flux cleaned = -0.00248004 Jy ! Component: 2350 - total flux cleaned = -0.00242852 Jy ! Component: 2400 - total flux cleaned = -0.00242852 Jy ! Component: 2450 - total flux cleaned = -0.00242016 Jy ! Component: 2500 - total flux cleaned = -0.00237873 Jy ! Component: 2550 - total flux cleaned = -0.0023542 Jy ! Component: 2600 - total flux cleaned = -0.0023055 Jy ! Component: 2650 - total flux cleaned = -0.0022734 Jy ! Component: 2700 - total flux cleaned = -0.00222587 Jy ! Component: 2750 - total flux cleaned = -0.00219452 Jy ! Component: 2800 - total flux cleaned = -0.00216353 Jy ! Component: 2850 - total flux cleaned = -0.00211745 Jy ! Component: 2900 - total flux cleaned = -0.00207958 Jy ! Component: 2950 - total flux cleaned = -0.00205705 Jy ! Component: 3000 - total flux cleaned = -0.00203479 Jy ! Component: 3050 - total flux cleaned = -0.00201272 Jy ! Component: 3100 - total flux cleaned = -0.00196899 Jy ! Component: 3150 - total flux cleaned = -0.00192579 Jy ! Component: 3200 - total flux cleaned = -0.0018972 Jy ! Component: 3250 - total flux cleaned = -0.00184052 Jy ! Component: 3300 - total flux cleaned = -0.00181941 Jy ! Component: 3350 - total flux cleaned = -0.0017496 Jy ! Component: 3400 - total flux cleaned = -0.00172882 Jy ! Component: 3450 - total flux cleaned = -0.00168063 Jy ! Component: 3500 - total flux cleaned = -0.00162599 Jy ! Component: 3550 - total flux cleaned = -0.00158533 Jy ! Component: 3600 - total flux cleaned = -0.00154494 Jy ! Component: 3650 - total flux cleaned = -0.00150488 Jy ! Component: 3700 - total flux cleaned = -0.00147832 Jy ! Component: 3750 - total flux cleaned = -0.00142558 Jy ! Component: 3800 - total flux cleaned = -0.00137329 Jy ! Component: 3850 - total flux cleaned = -0.00134736 Jy ! Component: 3900 - total flux cleaned = -0.00130215 Jy ! Component: 3950 - total flux cleaned = -0.00127008 Jy ! Component: 4000 - total flux cleaned = -0.00123819 Jy ! Component: 4050 - total flux cleaned = -0.00120649 Jy ! Total flux subtracted in 4096 components = -0.00116861 Jy ! Clean residual min=-0.000395 max=0.000379 Jy/beam ! Clean residual mean=-0.000001 rms=0.000118 Jy/beam ! Combined flux in latest and established models = 0.10711 Jy keep ! Adding 289 model components to the UV plane model. ! The established model now contains 412 components and 0.10711 Jy ![Exited script file: muppet] wmap "J1146+0458_S_2015_01_22_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.049 x 11.52 at -26.23 degrees (North through East) ! Clean map min=-0.0013853 max=0.082916 Jy/beam ! Writing clean map to FITS file: J1146+0458_S_2015_01_22_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.082916 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000118631 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.429222 0.429222 0.858444 1.71689 3.43377 6.86755 13.7351 27.4702 54.9404 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.082 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.049 x 11.52 at -26.23 degrees (North through East) ! Clean map min=-0.0013853 max=0.082916 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1146+0458_S_2015_01_22_pus_uvs.log closed on Tue Jan 3 22:52:08 2017