! Started logfile: J1144+0054_S_2015_01_22_pus_uvs.log on Tue Jan 3 22:51:54 2017 obs J1144+0054_S_2015_01_22_pus_uva.fits ! Reading UV FITS file: J1144+0054_S_2015_01_22_pus_uva.fits ! AN table 1: 54 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.622222 visibilities/baseline/integration-bin. ! Found source: J1144+0054 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 281 lines of history. ! ! Reading 6048 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1144+0054_S_2015_01_22_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 108 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 108 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 108 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 108 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.801368Jy sigma=0.008547 ! Fit after self-cal, rms=0.772906Jy sigma=0.008343 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.458 mas, bmaj=11.83 mas, bpa=-24.96 degrees ! Estimated noise=1098.47 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.182378 Jy ! Component: 100 - total flux cleaned = 0.229711 Jy ! Total flux subtracted in 100 components = 0.229711 Jy ! Clean residual min=-0.016932 max=0.029387 Jy/beam ! Clean residual mean=-0.000121 rms=0.005866 Jy/beam ! Combined flux in latest and established models = 0.229711 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.229711 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106201Jy sigma=0.000971 ! Fit after self-cal, rms=0.106161Jy sigma=0.000971 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.052 mas, bmaj=11.91 mas, bpa=-23.29 degrees ! Estimated noise=867.847 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0272851 Jy ! Component: 100 - total flux cleaned = 0.0430586 Jy ! Component: 150 - total flux cleaned = 0.0528353 Jy ! Component: 200 - total flux cleaned = 0.0592607 Jy ! Total flux subtracted in 200 components = 0.0592607 Jy ! Clean residual min=-0.013128 max=0.014980 Jy/beam ! Clean residual mean=-0.000128 rms=0.003847 Jy/beam ! Combined flux in latest and established models = 0.288972 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 35 components and 0.288972 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098870Jy sigma=0.000874 ! Fit after self-cal, rms=0.098714Jy sigma=0.000873 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00* HN 1.24 KP 1.05 ! LA 1.04 MK 1.05 NL 1.01 OV 0.95 ! PT 0.99 SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.00* HN 1.40 KP 0.96 ! LA 1.01 MK 1.01 NL 1.17 OV 0.96 ! PT 1.01 SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.00* HN 1.37 KP 0.83 ! LA 0.80 MK 1.03 NL 1.17 OV 0.91 ! PT 0.97 SC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.00* HN 1.33 KP 0.79 ! LA 0.89 MK 1.01 NL 0.79 OV 0.99 ! PT 1.03 SC 1.00* ! ! ! Fit before self-cal, rms=0.098714Jy sigma=0.000873 ! Fit after self-cal, rms=0.099657Jy sigma=0.000782 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.119 mas, bmaj=11.89 mas, bpa=-23.07 degrees ! Estimated noise=875.262 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0059729 Jy ! Component: 100 - total flux cleaned = -0.00671045 Jy ! Component: 150 - total flux cleaned = -0.00732677 Jy ! Component: 200 - total flux cleaned = -0.00786359 Jy ! Total flux subtracted in 200 components = -0.00786359 Jy ! Clean residual min=-0.007317 max=0.006249 Jy/beam ! Clean residual mean=-0.000069 rms=0.001824 Jy/beam ! Combined flux in latest and established models = 0.281108 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 50 components and 0.281108 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098993Jy sigma=0.000776 ! Fit after self-cal, rms=0.099105Jy sigma=0.000775 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099105Jy sigma=0.000775 ! Fit after self-cal, rms=0.099973Jy sigma=0.000774 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.13 mas, bmaj=11.87 mas, bpa=-23.02 degrees ! Estimated noise=874.247 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00382014 Jy ! Component: 100 - total flux cleaned = -0.00491999 Jy ! Component: 150 - total flux cleaned = -0.00550402 Jy ! Component: 200 - total flux cleaned = -0.00594779 Jy ! Total flux subtracted in 200 components = -0.00594779 Jy ! Clean residual min=-0.006332 max=0.005450 Jy/beam ! Clean residual mean=-0.000060 rms=0.001572 Jy/beam ! Combined flux in latest and established models = 0.275161 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 57 components and 0.275161 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099598Jy sigma=0.000771 ! Fit after self-cal, rms=0.099608Jy sigma=0.000771 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000511903 Jy ! Component: 100 - total flux cleaned = -0.000895807 Jy ! Component: 150 - total flux cleaned = -0.00124912 Jy ! Component: 200 - total flux cleaned = -0.00151081 Jy ! Total flux subtracted in 200 components = -0.00151081 Jy ! Clean residual min=-0.005947 max=0.005172 Jy/beam ! Clean residual mean=-0.000067 rms=0.001510 Jy/beam ! Combined flux in latest and established models = 0.27365 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 64 components and 0.27365 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099479Jy sigma=0.000770 ! Fit after self-cal, rms=0.099479Jy sigma=0.000770 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099479Jy sigma=0.000770 ! Fit after self-cal, rms=0.100614Jy sigma=0.000769 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.143 mas, bmaj=11.85 mas, bpa=-22.97 degrees ! Estimated noise=873.875 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00255286 Jy ! Component: 100 - total flux cleaned = -0.00320239 Jy ! Component: 150 - total flux cleaned = -0.00378696 Jy ! Component: 200 - total flux cleaned = -0.00431527 Jy ! Total flux subtracted in 200 components = -0.00431527 Jy ! Clean residual min=-0.005197 max=0.004589 Jy/beam ! Clean residual mean=-0.000053 rms=0.001324 Jy/beam ! Combined flux in latest and established models = 0.269335 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 66 components and 0.269335 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100397Jy sigma=0.000768 ! Fit after self-cal, rms=0.100414Jy sigma=0.000768 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0003757 Jy ! Component: 100 - total flux cleaned = -0.000833628 Jy ! Component: 150 - total flux cleaned = -0.001094 Jy ! Component: 200 - total flux cleaned = -0.00133505 Jy ! Total flux subtracted in 200 components = -0.00133505 Jy ! Clean residual min=-0.004928 max=0.004484 Jy/beam ! Clean residual mean=-0.000059 rms=0.001292 Jy/beam ! Combined flux in latest and established models = 0.268 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 69 components and 0.268 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100332Jy sigma=0.000767 ! Fit after self-cal, rms=0.100335Jy sigma=0.000767 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100335Jy sigma=0.000767 ! Fit after self-cal, rms=0.101431Jy sigma=0.000766 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.158 mas, bmaj=13.11 mas, bpa=-2.533 degrees ! Estimated noise=1026.95 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00204126 Jy ! Component: 100 - total flux cleaned = -0.00245091 Jy ! Component: 150 - total flux cleaned = -0.00265611 Jy ! Component: 200 - total flux cleaned = -0.00289024 Jy ! Total flux subtracted in 200 components = -0.00289024 Jy ! Clean residual min=-0.006120 max=0.005178 Jy/beam ! Clean residual mean=-0.000079 rms=0.001619 Jy/beam ! Combined flux in latest and established models = 0.265109 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 73 components and 0.265109 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101325Jy sigma=0.000766 ! Fit after self-cal, rms=0.101326Jy sigma=0.000766 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000313573 Jy ! Component: 100 - total flux cleaned = -0.000360466 Jy ! Component: 150 - total flux cleaned = -0.000435778 Jy ! Component: 200 - total flux cleaned = -0.000539588 Jy ! Total flux subtracted in 200 components = -0.000539588 Jy ! Clean residual min=-0.005804 max=0.005047 Jy/beam ! Clean residual mean=-0.000083 rms=0.001597 Jy/beam ! Combined flux in latest and established models = 0.26457 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 79 components and 0.26457 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101288Jy sigma=0.000765 ! Fit after self-cal, rms=0.101279Jy sigma=0.000765 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.152 mas, bmaj=11.84 mas, bpa=-22.92 degrees ! Estimated noise=873.222 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.152 x 11.84 at -22.92 degrees (North through East) ! Clean map min=-0.0044085 max=0.22434 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.521 mas, bmaj=11.87 mas, bpa=-24.56 degrees ! Estimated noise=1115.63 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.185099 Jy ! Component: 100 - total flux cleaned = 0.227385 Jy ! Component: 150 - total flux cleaned = 0.245659 Jy ! Component: 200 - total flux cleaned = 0.255956 Jy ! Total flux subtracted in 200 components = 0.255956 Jy ! Clean residual min=-0.008175 max=0.007949 Jy/beam ! Clean residual mean=-0.000036 rms=0.002023 Jy/beam ! Combined flux in latest and established models = 0.255957 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.255957 Jy ! Inverting map and beam ! Estimated beam: bmin=4.152 mas, bmaj=11.84 mas, bpa=-22.92 degrees ! Estimated noise=873.222 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00316874 Jy ! Component: 100 - total flux cleaned = 0.00513427 Jy ! Component: 150 - total flux cleaned = 0.00641236 Jy ! Component: 200 - total flux cleaned = 0.00675581 Jy ! Total flux subtracted in 200 components = 0.00675581 Jy ! Clean residual min=-0.004800 max=0.005203 Jy/beam ! Clean residual mean=-0.000058 rms=0.001296 Jy/beam ! Combined flux in latest and established models = 0.262712 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 27 components and 0.262712 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.158 mas, bmaj=13.11 mas, bpa=-2.533 degrees ! Estimated noise=1026.95 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000184013 Jy ! Component: 100 - total flux cleaned = 5.42963e-06 Jy ! Component: 150 - total flux cleaned = 0.000196983 Jy ! Component: 200 - total flux cleaned = 0.000320551 Jy ! Total flux subtracted in 200 components = 0.000320551 Jy ! Clean residual min=-0.005559 max=0.005425 Jy/beam ! Clean residual mean=-0.000095 rms=0.001658 Jy/beam ! Combined flux in latest and established models = 0.263033 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000113747 Jy ! Component: 100 - total flux cleaned = 0.000222377 Jy ! Component: 150 - total flux cleaned = 0.000290379 Jy ! Component: 200 - total flux cleaned = 0.00038929 Jy ! Total flux subtracted in 200 components = 0.00038929 Jy ! Clean residual min=-0.005460 max=0.005243 Jy/beam ! Clean residual mean=-0.000092 rms=0.001637 Jy/beam ! Combined flux in latest and established models = 0.263422 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 48 components and 0.263422 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.152 mas, bmaj=11.84 mas, bpa=-22.92 degrees ! Estimated noise=873.222 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000147448 Jy ! Component: 100 - total flux cleaned = 0.000280888 Jy ! Component: 150 - total flux cleaned = 0.000338389 Jy ! Component: 200 - total flux cleaned = 0.00033843 Jy ! Total flux subtracted in 200 components = 0.00033843 Jy ! Clean residual min=-0.004156 max=0.003930 Jy/beam ! Clean residual mean=-0.000053 rms=0.001151 Jy/beam ! Combined flux in latest and established models = 0.263761 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 60 components and 0.263761 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101269Jy sigma=0.000766 ! Fit after self-cal, rms=0.101263Jy sigma=0.000766 wmodel J1144+0054_S_2015_01_22_pus_map.mod ! Writing 60 model components to file: J1144+0054_S_2015_01_22_pus_map.mod wobs J1144+0054_S_2015_01_22_pus_uvs.fits ! Writing UV FITS file: J1144+0054_S_2015_01_22_pus_uvs.fits wwins J1144+0054_S_2015_01_22_pus_map.win ! wwins: Wrote 1 windows to J1144+0054_S_2015_01_22_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00146463 Jy ! Component: 100 - total flux cleaned = -0.00233523 Jy ! Component: 150 - total flux cleaned = -0.00275686 Jy ! Component: 200 - total flux cleaned = -0.00319793 Jy ! Component: 250 - total flux cleaned = -0.00334791 Jy ! Component: 300 - total flux cleaned = -0.00335026 Jy ! Component: 350 - total flux cleaned = -0.00348296 Jy ! Component: 400 - total flux cleaned = -0.00348387 Jy ! Component: 450 - total flux cleaned = -0.00356288 Jy ! Component: 500 - total flux cleaned = -0.00356169 Jy ! Component: 550 - total flux cleaned = -0.00356025 Jy ! Component: 600 - total flux cleaned = -0.00349002 Jy ! Component: 650 - total flux cleaned = -0.00348986 Jy ! Component: 700 - total flux cleaned = -0.0034239 Jy ! Component: 750 - total flux cleaned = -0.00348632 Jy ! Component: 800 - total flux cleaned = -0.00363869 Jy ! Component: 850 - total flux cleaned = -0.00372701 Jy ! Component: 900 - total flux cleaned = -0.00381278 Jy ! Component: 950 - total flux cleaned = -0.00392399 Jy ! Component: 1000 - total flux cleaned = -0.0040317 Jy ! Component: 1050 - total flux cleaned = -0.00416298 Jy ! Component: 1100 - total flux cleaned = -0.00429118 Jy ! Component: 1150 - total flux cleaned = -0.0043914 Jy ! Component: 1200 - total flux cleaned = -0.00451369 Jy ! Component: 1250 - total flux cleaned = -0.0045373 Jy ! Component: 1300 - total flux cleaned = -0.00460754 Jy ! Component: 1350 - total flux cleaned = -0.0046531 Jy ! Component: 1400 - total flux cleaned = -0.00469728 Jy ! Component: 1450 - total flux cleaned = -0.00467534 Jy ! Component: 1500 - total flux cleaned = -0.00469679 Jy ! Component: 1550 - total flux cleaned = -0.00469666 Jy ! Component: 1600 - total flux cleaned = -0.00469671 Jy ! Component: 1650 - total flux cleaned = -0.00477777 Jy ! Component: 1700 - total flux cleaned = -0.00481763 Jy ! Component: 1750 - total flux cleaned = -0.00493481 Jy ! Component: 1800 - total flux cleaned = -0.00499225 Jy ! Component: 1850 - total flux cleaned = -0.00506773 Jy ! Component: 1900 - total flux cleaned = -0.00514174 Jy ! Component: 1950 - total flux cleaned = -0.00519651 Jy ! Component: 2000 - total flux cleaned = -0.00528661 Jy ! Component: 2050 - total flux cleaned = -0.00539309 Jy ! Component: 2100 - total flux cleaned = -0.00551554 Jy ! Component: 2150 - total flux cleaned = -0.00560194 Jy ! Component: 2200 - total flux cleaned = -0.00572155 Jy ! Component: 2250 - total flux cleaned = -0.0058061 Jy ! Component: 2300 - total flux cleaned = -0.00592317 Jy ! Component: 2350 - total flux cleaned = -0.00602223 Jy ! Component: 2400 - total flux cleaned = -0.0061042 Jy ! Component: 2450 - total flux cleaned = -0.00618528 Jy ! Component: 2500 - total flux cleaned = -0.00626578 Jy ! Component: 2550 - total flux cleaned = -0.0063613 Jy ! Component: 2600 - total flux cleaned = -0.00647195 Jy ! Component: 2650 - total flux cleaned = -0.0065819 Jy ! Component: 2700 - total flux cleaned = -0.00669102 Jy ! Component: 2750 - total flux cleaned = -0.00679961 Jy ! Component: 2800 - total flux cleaned = -0.00684598 Jy ! Component: 2850 - total flux cleaned = -0.0069534 Jy ! Component: 2900 - total flux cleaned = -0.00704496 Jy ! Component: 2950 - total flux cleaned = -0.007136 Jy ! Component: 3000 - total flux cleaned = -0.00721159 Jy ! Component: 3050 - total flux cleaned = -0.00731692 Jy ! Component: 3100 - total flux cleaned = -0.00739199 Jy ! Component: 3150 - total flux cleaned = -0.00748164 Jy ! Component: 3200 - total flux cleaned = -0.00755608 Jy ! Component: 3250 - total flux cleaned = -0.00764503 Jy ! Component: 3300 - total flux cleaned = -0.00771879 Jy ! Component: 3350 - total flux cleaned = -0.00779227 Jy ! Component: 3400 - total flux cleaned = -0.00788021 Jy ! Component: 3450 - total flux cleaned = -0.0079533 Jy ! Component: 3500 - total flux cleaned = -0.00801174 Jy ! Component: 3550 - total flux cleaned = -0.00809915 Jy ! Component: 3600 - total flux cleaned = -0.00814278 Jy ! Component: 3650 - total flux cleaned = -0.0082299 Jy ! Component: 3700 - total flux cleaned = -0.00831698 Jy ! Component: 3750 - total flux cleaned = -0.00840389 Jy ! Component: 3800 - total flux cleaned = -0.00847628 Jy ! Component: 3850 - total flux cleaned = -0.00856316 Jy ! Component: 3900 - total flux cleaned = -0.008621 Jy ! Component: 3950 - total flux cleaned = -0.00869333 Jy ! Component: 4000 - total flux cleaned = -0.00878018 Jy ! Component: 4050 - total flux cleaned = -0.0088526 Jy ! Total flux subtracted in 4096 components = -0.00895412 Jy ! Clean residual min=-0.000847 max=0.000802 Jy/beam ! Clean residual mean=-0.000015 rms=0.000272 Jy/beam ! Combined flux in latest and established models = 0.254806 Jy keep ! Adding 340 model components to the UV plane model. ! The established model now contains 400 components and 0.254806 Jy ![Exited script file: muppet] wmap "J1144+0054_S_2015_01_22_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.152 x 11.84 at -22.92 degrees (North through East) ! Clean map min=-0.00268 max=0.23106 Jy/beam ! Writing clean map to FITS file: J1144+0054_S_2015_01_22_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.231061 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00026321 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.34174 0.34174 0.68348 1.36696 2.73392 5.46784 10.9357 21.8714 43.7427 87.4855 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.231 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.152 x 11.84 at -22.92 degrees (North through East) ! Clean map min=-0.00268 max=0.23106 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1144+0054_S_2015_01_22_pus_uvs.log closed on Tue Jan 3 22:52:01 2017