! Started logfile: J1142+1547_S_2015_01_22_pus_uvs.log on Tue Jan 3 22:51:48 2017 obs J1142+1547_S_2015_01_22_pus_uva.fits ! Reading UV FITS file: J1142+1547_S_2015_01_22_pus_uva.fits ! AN table 1: 53 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.8 visibilities/baseline/integration-bin. ! Found source: J1142+1547 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 281 lines of history. ! ! Reading 7632 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1142+1547_S_2015_01_22_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 53 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 53 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 53 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 53 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.914970Jy sigma=0.011627 ! Fit after self-cal, rms=0.909077Jy sigma=0.011555 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.563 mas, bmaj=6.568 mas, bpa=-10.36 degrees ! Estimated noise=833.719 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0693335 Jy ! Component: 100 - total flux cleaned = 0.0866504 Jy ! Total flux subtracted in 100 components = 0.0866504 Jy ! Clean residual min=-0.005525 max=0.008680 Jy/beam ! Clean residual mean=0.000014 rms=0.001667 Jy/beam ! Combined flux in latest and established models = 0.0866504 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.0866504 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072497Jy sigma=0.000831 ! Fit after self-cal, rms=0.072505Jy sigma=0.000831 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.986 mas, bmaj=7.524 mas, bpa=-12.04 degrees ! Estimated noise=650.558 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0113031 Jy ! Component: 100 - total flux cleaned = 0.0176844 Jy ! Component: 150 - total flux cleaned = 0.021877 Jy ! Component: 200 - total flux cleaned = 0.0247313 Jy ! Total flux subtracted in 200 components = 0.0247313 Jy ! Clean residual min=-0.004713 max=0.007385 Jy/beam ! Clean residual mean=0.000023 rms=0.001703 Jy/beam ! Combined flux in latest and established models = 0.111382 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 36 components and 0.111382 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070403Jy sigma=0.000808 ! Fit after self-cal, rms=0.070378Jy sigma=0.000807 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.00* HN 0.96 KP 1.05 ! LA 0.98 MK 0.99 NL 1.02 OV 1.01 ! PT 0.97 SC 0.92 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 1.00* HN 0.98 KP 0.94 ! LA 1.00 MK 1.04 NL 1.17 OV 1.03 ! PT 0.95 SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.00* HN 0.98 KP 0.86 ! LA 0.78 MK 1.01 NL 1.22 OV 0.96 ! PT 0.97 SC 0.96 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.25 FD 1.00* HN 0.99 KP 0.77 ! LA 0.85 MK 1.04 NL 1.02 OV 1.00 ! PT 0.96 SC 0.90 ! ! ! Fit before self-cal, rms=0.070378Jy sigma=0.000807 ! Fit after self-cal, rms=0.066049Jy sigma=0.000793 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.995 mas, bmaj=7.598 mas, bpa=-11.6 degrees ! Estimated noise=642.258 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (12, -25.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00718546 Jy ! Component: 100 - total flux cleaned = 0.0106168 Jy ! Component: 150 - total flux cleaned = 0.0123901 Jy ! Component: 200 - total flux cleaned = 0.0135187 Jy ! Total flux subtracted in 200 components = 0.0135187 Jy ! Clean residual min=-0.002564 max=0.003367 Jy/beam ! Clean residual mean=0.000003 rms=0.000741 Jy/beam ! Combined flux in latest and established models = 0.1249 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 76 components and 0.1249 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065281Jy sigma=0.000782 ! Fit after self-cal, rms=0.065252Jy sigma=0.000781 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065252Jy sigma=0.000781 ! Fit after self-cal, rms=0.065141Jy sigma=0.000781 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.006 mas, bmaj=7.625 mas, bpa=-11.49 degrees ! Estimated noise=640.941 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00122976 Jy ! Component: 100 - total flux cleaned = 0.00146673 Jy ! Component: 150 - total flux cleaned = 0.0017523 Jy ! Component: 200 - total flux cleaned = 0.00192806 Jy ! Total flux subtracted in 200 components = 0.00192806 Jy ! Clean residual min=-0.002162 max=0.002743 Jy/beam ! Clean residual mean=-0.000001 rms=0.000629 Jy/beam ! Combined flux in latest and established models = 0.126828 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 93 components and 0.126828 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065071Jy sigma=0.000780 ! Fit after self-cal, rms=0.065078Jy sigma=0.000780 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-18, 10). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00247391 Jy ! Component: 100 - total flux cleaned = 0.00290806 Jy ! Component: 150 - total flux cleaned = 0.00311294 Jy ! Component: 200 - total flux cleaned = 0.00317968 Jy ! Total flux subtracted in 200 components = 0.00317968 Jy ! Clean residual min=-0.001921 max=0.001775 Jy/beam ! Clean residual mean=-0.000004 rms=0.000513 Jy/beam ! Combined flux in latest and established models = 0.130008 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 112 components and 0.130008 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064971Jy sigma=0.000778 ! Fit after self-cal, rms=0.064967Jy sigma=0.000778 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064967Jy sigma=0.000778 ! Fit after self-cal, rms=0.064894Jy sigma=0.000778 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.001 mas, bmaj=7.62 mas, bpa=-11.47 degrees ! Estimated noise=640.241 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000574407 Jy ! Component: 100 - total flux cleaned = 0.000800112 Jy ! Component: 150 - total flux cleaned = 0.00100332 Jy ! Component: 200 - total flux cleaned = 0.00111959 Jy ! Total flux subtracted in 200 components = 0.00111959 Jy ! Clean residual min=-0.001739 max=0.001724 Jy/beam ! Clean residual mean=-0.000004 rms=0.000485 Jy/beam ! Combined flux in latest and established models = 0.131128 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 124 components and 0.131128 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064873Jy sigma=0.000778 ! Fit after self-cal, rms=0.064873Jy sigma=0.000778 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000167541 Jy ! Component: 100 - total flux cleaned = 0.000253361 Jy ! Component: 150 - total flux cleaned = 0.000292751 Jy ! Component: 200 - total flux cleaned = 0.000312259 Jy ! Total flux subtracted in 200 components = 0.000312259 Jy ! Clean residual min=-0.001683 max=0.001694 Jy/beam ! Clean residual mean=-0.000004 rms=0.000472 Jy/beam ! Combined flux in latest and established models = 0.13144 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 136 components and 0.13144 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064861Jy sigma=0.000778 ! Fit after self-cal, rms=0.064861Jy sigma=0.000778 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064861Jy sigma=0.000778 ! Fit after self-cal, rms=0.064809Jy sigma=0.000778 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.982 mas, bmaj=10.52 mas, bpa=-8.326 degrees ! Estimated noise=819.14 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000248606 Jy ! Component: 100 - total flux cleaned = 0.000249459 Jy ! Component: 150 - total flux cleaned = 0.000247905 Jy ! Component: 200 - total flux cleaned = 0.000183976 Jy ! Total flux subtracted in 200 components = 0.000183976 Jy ! Clean residual min=-0.002324 max=0.001712 Jy/beam ! Clean residual mean=-0.000008 rms=0.000582 Jy/beam ! Combined flux in latest and established models = 0.131624 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 154 components and 0.131624 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064801Jy sigma=0.000778 ! Fit after self-cal, rms=0.064801Jy sigma=0.000778 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.767e-05 Jy ! Component: 100 - total flux cleaned = 6.76159e-05 Jy ! Component: 150 - total flux cleaned = 3.15615e-05 Jy ! Component: 200 - total flux cleaned = 1.43951e-05 Jy ! Total flux subtracted in 200 components = 1.43951e-05 Jy ! Clean residual min=-0.002247 max=0.001634 Jy/beam ! Clean residual mean=-0.000008 rms=0.000561 Jy/beam ! Combined flux in latest and established models = 0.131638 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 159 components and 0.131638 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064798Jy sigma=0.000778 ! Fit after self-cal, rms=0.064797Jy sigma=0.000778 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.998 mas, bmaj=7.619 mas, bpa=-11.5 degrees ! Estimated noise=639.577 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.998 x 7.619 at -11.5 degrees (North through East) ! Clean map min=-0.0020132 max=0.08889 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.571 mas, bmaj=6.684 mas, bpa=-9.946 degrees ! Estimated noise=814.448 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0675305 Jy ! Component: 100 - total flux cleaned = 0.084872 Jy ! Component: 150 - total flux cleaned = 0.0931684 Jy ! Component: 200 - total flux cleaned = 0.0989456 Jy ! Total flux subtracted in 200 components = 0.0989456 Jy ! Clean residual min=-0.003504 max=0.004254 Jy/beam ! Clean residual mean=0.000007 rms=0.000977 Jy/beam ! Combined flux in latest and established models = 0.0989455 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.0989455 Jy ! Inverting map and beam ! Estimated beam: bmin=2.998 mas, bmaj=7.619 mas, bpa=-11.5 degrees ! Estimated noise=639.577 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00705937 Jy ! Component: 100 - total flux cleaned = 0.0120857 Jy ! Component: 150 - total flux cleaned = 0.0160691 Jy ! Component: 200 - total flux cleaned = 0.019287 Jy ! Total flux subtracted in 200 components = 0.019287 Jy ! Clean residual min=-0.002676 max=0.002872 Jy/beam ! Clean residual mean=0.000005 rms=0.000807 Jy/beam ! Combined flux in latest and established models = 0.118233 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 62 components and 0.118233 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.982 mas, bmaj=10.52 mas, bpa=-8.326 degrees ! Estimated noise=819.14 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00493186 Jy ! Component: 100 - total flux cleaned = 0.00815429 Jy ! Component: 150 - total flux cleaned = 0.0104128 Jy ! Component: 200 - total flux cleaned = 0.0118185 Jy ! Total flux subtracted in 200 components = 0.0118185 Jy ! Clean residual min=-0.003025 max=0.002118 Jy/beam ! Clean residual mean=-0.000006 rms=0.000726 Jy/beam ! Combined flux in latest and established models = 0.130051 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000377111 Jy ! Component: 100 - total flux cleaned = 0.000565195 Jy ! Component: 150 - total flux cleaned = 0.00077268 Jy ! Component: 200 - total flux cleaned = 0.000955459 Jy ! Total flux subtracted in 200 components = 0.000955459 Jy ! Clean residual min=-0.002722 max=0.001889 Jy/beam ! Clean residual mean=-0.000007 rms=0.000616 Jy/beam ! Combined flux in latest and established models = 0.131007 Jy ! Adding 58 model components to the UV plane model. ! The established model now contains 114 components and 0.131007 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.998 mas, bmaj=7.619 mas, bpa=-11.5 degrees ! Estimated noise=639.577 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000526288 Jy ! Component: 100 - total flux cleaned = -0.00027739 Jy ! Component: 150 - total flux cleaned = -0.000137409 Jy ! Component: 200 - total flux cleaned = -4.54259e-05 Jy ! Total flux subtracted in 200 components = -4.54259e-05 Jy ! Clean residual min=-0.001908 max=0.001800 Jy/beam ! Clean residual mean=-0.000003 rms=0.000478 Jy/beam ! Combined flux in latest and established models = 0.130961 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 140 components and 0.130961 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064839Jy sigma=0.000778 ! Fit after self-cal, rms=0.064818Jy sigma=0.000778 wmodel J1142+1547_S_2015_01_22_pus_map.mod ! Writing 140 model components to file: J1142+1547_S_2015_01_22_pus_map.mod wobs J1142+1547_S_2015_01_22_pus_uvs.fits ! Writing UV FITS file: J1142+1547_S_2015_01_22_pus_uvs.fits wwins J1142+1547_S_2015_01_22_pus_map.win ! wwins: Wrote 3 windows to J1142+1547_S_2015_01_22_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000133209 Jy ! Component: 100 - total flux cleaned = 4.60504e-05 Jy ! Component: 150 - total flux cleaned = -6.84143e-05 Jy ! Component: 200 - total flux cleaned = -0.000122618 Jy ! Component: 250 - total flux cleaned = -4.51781e-05 Jy ! Component: 300 - total flux cleaned = -2.00931e-05 Jy ! Component: 350 - total flux cleaned = 3.89256e-06 Jy ! Component: 400 - total flux cleaned = 4.91282e-05 Jy ! Component: 450 - total flux cleaned = 2.72428e-05 Jy ! Component: 500 - total flux cleaned = -1.42136e-05 Jy ! Component: 550 - total flux cleaned = -1.39106e-05 Jy ! Component: 600 - total flux cleaned = -1.35188e-05 Jy ! Component: 650 - total flux cleaned = -3.30246e-05 Jy ! Component: 700 - total flux cleaned = -5.23628e-05 Jy ! Component: 750 - total flux cleaned = -5.23094e-05 Jy ! Component: 800 - total flux cleaned = -1.61812e-05 Jy ! Component: 850 - total flux cleaned = -1.62146e-05 Jy ! Component: 900 - total flux cleaned = -1.57772e-05 Jy ! Component: 950 - total flux cleaned = 1.48075e-06 Jy ! Component: 1000 - total flux cleaned = 4.99808e-05 Jy ! Component: 1050 - total flux cleaned = 1.79997e-05 Jy ! Component: 1100 - total flux cleaned = -1.31453e-05 Jy ! Component: 1150 - total flux cleaned = -1.28547e-05 Jy ! Component: 1200 - total flux cleaned = 1.70051e-05 Jy ! Component: 1250 - total flux cleaned = -1.24861e-05 Jy ! Component: 1300 - total flux cleaned = -1.24799e-05 Jy ! Component: 1350 - total flux cleaned = -2.65542e-05 Jy ! Component: 1400 - total flux cleaned = -5.42068e-05 Jy ! Component: 1450 - total flux cleaned = -6.77176e-05 Jy ! Component: 1500 - total flux cleaned = -5.39882e-05 Jy ! Component: 1550 - total flux cleaned = -1.55363e-06 Jy ! Component: 1600 - total flux cleaned = -4.07935e-05 Jy ! Component: 1650 - total flux cleaned = -2.78477e-05 Jy ! Component: 1700 - total flux cleaned = -2.53061e-06 Jy ! Component: 1750 - total flux cleaned = 2.24273e-05 Jy ! Component: 1800 - total flux cleaned = 3.49869e-05 Jy ! Component: 1850 - total flux cleaned = 9.51341e-05 Jy ! Component: 1900 - total flux cleaned = 0.000142596 Jy ! Component: 1950 - total flux cleaned = 0.000166025 Jy ! Component: 2000 - total flux cleaned = 0.000223641 Jy ! Component: 2050 - total flux cleaned = 0.000257688 Jy ! Component: 2100 - total flux cleaned = 0.000324932 Jy ! Component: 2150 - total flux cleaned = 0.000380217 Jy ! Component: 2200 - total flux cleaned = 0.000478601 Jy ! Component: 2250 - total flux cleaned = 0.000521605 Jy ! Component: 2300 - total flux cleaned = 0.000585866 Jy ! Component: 2350 - total flux cleaned = 0.00062802 Jy ! Component: 2400 - total flux cleaned = 0.000680097 Jy ! Component: 2450 - total flux cleaned = 0.000721261 Jy ! Component: 2500 - total flux cleaned = 0.000812933 Jy ! Component: 2550 - total flux cleaned = 0.000843016 Jy ! Component: 2600 - total flux cleaned = 0.000902778 Jy ! Component: 2650 - total flux cleaned = 0.000952046 Jy ! Component: 2700 - total flux cleaned = 0.000991105 Jy ! Component: 2750 - total flux cleaned = 0.00104923 Jy ! Component: 2800 - total flux cleaned = 0.00109712 Jy ! Component: 2850 - total flux cleaned = 0.00112557 Jy ! Component: 2900 - total flux cleaned = 0.00118195 Jy ! Component: 2950 - total flux cleaned = 0.00120056 Jy ! Component: 3000 - total flux cleaned = 0.00122812 Jy ! Component: 3050 - total flux cleaned = 0.00125551 Jy ! Component: 3100 - total flux cleaned = 0.00128269 Jy ! Component: 3150 - total flux cleaned = 0.00130057 Jy ! Component: 3200 - total flux cleaned = 0.00134506 Jy ! Component: 3250 - total flux cleaned = 0.00139781 Jy ! Component: 3300 - total flux cleaned = 0.00139781 Jy ! Component: 3350 - total flux cleaned = 0.00143242 Jy ! Component: 3400 - total flux cleaned = 0.00148392 Jy ! Component: 3450 - total flux cleaned = 0.00150936 Jy ! Component: 3500 - total flux cleaned = 0.00151787 Jy ! Component: 3550 - total flux cleaned = 0.00155974 Jy ! Component: 3600 - total flux cleaned = 0.00160123 Jy ! Component: 3650 - total flux cleaned = 0.00163422 Jy ! Component: 3700 - total flux cleaned = 0.00165067 Jy ! Component: 3750 - total flux cleaned = 0.00170755 Jy ! Component: 3800 - total flux cleaned = 0.00173168 Jy ! Component: 3850 - total flux cleaned = 0.00173974 Jy ! Component: 3900 - total flux cleaned = 0.00178758 Jy ! Component: 3950 - total flux cleaned = 0.00180336 Jy ! Component: 4000 - total flux cleaned = 0.00179549 Jy ! Component: 4050 - total flux cleaned = 0.00183467 Jy ! Total flux subtracted in 4096 components = 0.00185023 Jy ! Clean residual min=-0.000433 max=0.000495 Jy/beam ! Clean residual mean=-0.000002 rms=0.000134 Jy/beam ! Combined flux in latest and established models = 0.132811 Jy keep ! Adding 235 model components to the UV plane model. ! The established model now contains 375 components and 0.132811 Jy ![Exited script file: muppet] wmap "J1142+1547_S_2015_01_22_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.998 x 7.619 at -11.5 degrees (North through East) ! Clean map min=-0.0013208 max=0.089353 Jy/beam ! Writing clean map to FITS file: J1142+1547_S_2015_01_22_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0893534 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000132362 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.444399 0.444399 0.888798 1.7776 3.55519 7.11038 14.2208 28.4415 56.8831 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.089 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.998 x 7.619 at -11.5 degrees (North through East) ! Clean map min=-0.0013208 max=0.089353 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1142+1547_S_2015_01_22_pus_uvs.log closed on Tue Jan 3 22:51:54 2017