! Started logfile: J1136+3407_S_2015_01_23_pus_uvs.log on Mon Jan 2 19:23:21 2017 obs J1136+3407_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J1136+3407_S_2015_01_23_pus_uva.fits ! AN table 1: 58 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.836015 visibilities/baseline/integration-bin. ! Found source: J1136+3407 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 8728 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1136+3407_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 52 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 52 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 52 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 52 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.890395Jy sigma=0.010424 ! Fit after self-cal, rms=0.874712Jy sigma=0.010351 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.047 mas, bmaj=4.906 mas, bpa=-2.844 degrees ! Estimated noise=975.622 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.105696 Jy ! Component: 100 - total flux cleaned = 0.129142 Jy ! Total flux subtracted in 100 components = 0.129142 Jy ! Clean residual min=-0.005455 max=0.007860 Jy/beam ! Clean residual mean=0.000012 rms=0.001423 Jy/beam ! Combined flux in latest and established models = 0.129142 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.129142 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.165551Jy sigma=0.000834 ! Fit after self-cal, rms=0.165599Jy sigma=0.000834 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.597 mas, bmaj=5.627 mas, bpa=-4.116 degrees ! Estimated noise=674.296 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0095712 Jy ! Component: 100 - total flux cleaned = 0.0141203 Jy ! Component: 150 - total flux cleaned = 0.0169729 Jy ! Component: 200 - total flux cleaned = 0.0188692 Jy ! Total flux subtracted in 200 components = 0.0188692 Jy ! Clean residual min=-0.004980 max=0.005213 Jy/beam ! Clean residual mean=0.000011 rms=0.001196 Jy/beam ! Combined flux in latest and established models = 0.148011 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 27 components and 0.148011 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.164872Jy sigma=0.000823 ! Fit after self-cal, rms=0.164925Jy sigma=0.000823 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.87 HN 0.94 KP 1.08 ! LA 0.99 MK 1.01 NL 1.04 OV 0.98 ! PT 1.02 SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.97 HN 0.99 KP 1.02 ! LA 0.95 MK 1.01 NL 1.15 OV 0.99 ! PT 0.99 SC 1.13 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 0.79 HN 1.01 KP 0.87 ! LA 0.79 MK 1.02 NL 1.53 OV 0.94 ! PT 0.99 SC 1.08 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.92 HN 0.97 KP 0.82 ! LA 0.80 MK 1.02 NL 1.06 OV 0.96 ! PT 0.99 SC 1.03 ! ! ! Fit before self-cal, rms=0.164925Jy sigma=0.000823 ! Fit after self-cal, rms=0.146698Jy sigma=0.000787 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.639 mas, bmaj=5.708 mas, bpa=-4.39 degrees ! Estimated noise=673.491 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00121908 Jy ! Component: 100 - total flux cleaned = -0.00138072 Jy ! Component: 150 - total flux cleaned = -0.00142644 Jy ! Component: 200 - total flux cleaned = -0.00144746 Jy ! Total flux subtracted in 200 components = -0.00144746 Jy ! Clean residual min=-0.002251 max=0.002557 Jy/beam ! Clean residual mean=0.000002 rms=0.000634 Jy/beam ! Combined flux in latest and established models = 0.146564 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 34 components and 0.146564 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146679Jy sigma=0.000786 ! Fit after self-cal, rms=0.146696Jy sigma=0.000786 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146696Jy sigma=0.000786 ! Fit after self-cal, rms=0.148382Jy sigma=0.000783 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.64 mas, bmaj=5.698 mas, bpa=-3.889 degrees ! Estimated noise=673.78 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000193434 Jy ! Component: 100 - total flux cleaned = -0.000252504 Jy ! Component: 150 - total flux cleaned = -0.00030965 Jy ! Component: 200 - total flux cleaned = -0.000368478 Jy ! Total flux subtracted in 200 components = -0.000368478 Jy ! Clean residual min=-0.002028 max=0.002148 Jy/beam ! Clean residual mean=0.000002 rms=0.000487 Jy/beam ! Combined flux in latest and established models = 0.146195 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 40 components and 0.146195 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148378Jy sigma=0.000783 ! Fit after self-cal, rms=0.148464Jy sigma=0.000783 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-9, 95.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00107874 Jy ! Component: 100 - total flux cleaned = 0.00104081 Jy ! Component: 150 - total flux cleaned = 0.00101201 Jy ! Component: 200 - total flux cleaned = 0.000985486 Jy ! Total flux subtracted in 200 components = 0.000985486 Jy ! Clean residual min=-0.001975 max=0.001774 Jy/beam ! Clean residual mean=0.000002 rms=0.000465 Jy/beam ! Combined flux in latest and established models = 0.147181 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 53 components and 0.147181 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148428Jy sigma=0.000782 ! Fit after self-cal, rms=0.148441Jy sigma=0.000782 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148441Jy sigma=0.000782 ! Fit after self-cal, rms=0.148693Jy sigma=0.000782 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.646 mas, bmaj=5.704 mas, bpa=-3.78 degrees ! Estimated noise=674.232 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000112037 Jy ! Component: 100 - total flux cleaned = 6.59645e-05 Jy ! Component: 150 - total flux cleaned = 0.000104937 Jy ! Component: 200 - total flux cleaned = 0.000123154 Jy ! Total flux subtracted in 200 components = 0.000123154 Jy ! Clean residual min=-0.001923 max=0.001746 Jy/beam ! Clean residual mean=0.000001 rms=0.000458 Jy/beam ! Combined flux in latest and established models = 0.147304 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 64 components and 0.147304 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148682Jy sigma=0.000782 ! Fit after self-cal, rms=0.148691Jy sigma=0.000782 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.40467e-06 Jy ! Component: 100 - total flux cleaned = 1.4308e-05 Jy ! Component: 150 - total flux cleaned = 1.44927e-05 Jy ! Component: 200 - total flux cleaned = 2.99558e-05 Jy ! Total flux subtracted in 200 components = 2.99558e-05 Jy ! Clean residual min=-0.001921 max=0.001741 Jy/beam ! Clean residual mean=0.000001 rms=0.000458 Jy/beam ! Combined flux in latest and established models = 0.147334 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 74 components and 0.147334 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148684Jy sigma=0.000782 ! Fit after self-cal, rms=0.148686Jy sigma=0.000782 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148686Jy sigma=0.000782 ! Fit after self-cal, rms=0.148741Jy sigma=0.000782 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.312 mas, bmaj=9.561 mas, bpa=-1.495 degrees ! Estimated noise=838.921 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000150868 Jy ! Component: 100 - total flux cleaned = 9.82744e-05 Jy ! Component: 150 - total flux cleaned = 5.3803e-05 Jy ! Component: 200 - total flux cleaned = 3.52351e-05 Jy ! Total flux subtracted in 200 components = 3.52351e-05 Jy ! Clean residual min=-0.002389 max=0.001927 Jy/beam ! Clean residual mean=0.000001 rms=0.000589 Jy/beam ! Combined flux in latest and established models = 0.147369 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 82 components and 0.147369 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148733Jy sigma=0.000782 ! Fit after self-cal, rms=0.148732Jy sigma=0.000782 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.03326e-05 Jy ! Component: 100 - total flux cleaned = 1.811e-06 Jy ! Component: 150 - total flux cleaned = -1.43135e-05 Jy ! Component: 200 - total flux cleaned = -1.42853e-05 Jy ! Total flux subtracted in 200 components = -1.42853e-05 Jy ! Clean residual min=-0.002404 max=0.001929 Jy/beam ! Clean residual mean=0.000001 rms=0.000589 Jy/beam ! Combined flux in latest and established models = 0.147355 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 87 components and 0.147355 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148726Jy sigma=0.000782 ! Fit after self-cal, rms=0.148727Jy sigma=0.000782 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.647 mas, bmaj=5.705 mas, bpa=-3.727 degrees ! Estimated noise=674.578 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.647 x 5.705 at -3.727 degrees (North through East) ! Clean map min=-0.0018115 max=0.13615 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.082 mas, bmaj=4.963 mas, bpa=-2.366 degrees ! Estimated noise=981.326 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.106211 Jy ! Component: 100 - total flux cleaned = 0.129488 Jy ! Component: 150 - total flux cleaned = 0.136751 Jy ! Component: 200 - total flux cleaned = 0.140118 Jy ! Total flux subtracted in 200 components = 0.140118 Jy ! Clean residual min=-0.003301 max=0.002940 Jy/beam ! Clean residual mean=0.000003 rms=0.000785 Jy/beam ! Combined flux in latest and established models = 0.140117 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.140117 Jy ! Inverting map and beam ! Estimated beam: bmin=3.647 mas, bmaj=5.705 mas, bpa=-3.727 degrees ! Estimated noise=674.578 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00325827 Jy ! Component: 100 - total flux cleaned = 0.00393474 Jy ! Component: 150 - total flux cleaned = 0.00436524 Jy ! Component: 200 - total flux cleaned = 0.00467577 Jy ! Total flux subtracted in 200 components = 0.00467577 Jy ! Clean residual min=-0.001904 max=0.001822 Jy/beam ! Clean residual mean=0.000001 rms=0.000474 Jy/beam ! Combined flux in latest and established models = 0.144793 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 47 components and 0.144793 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.312 mas, bmaj=9.561 mas, bpa=-1.495 degrees ! Estimated noise=838.921 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00110631 Jy ! Component: 100 - total flux cleaned = 0.00153413 Jy ! Component: 150 - total flux cleaned = 0.00165431 Jy ! Component: 200 - total flux cleaned = 0.00171391 Jy ! Total flux subtracted in 200 components = 0.00171391 Jy ! Clean residual min=-0.002376 max=0.001989 Jy/beam ! Clean residual mean=0.000001 rms=0.000591 Jy/beam ! Combined flux in latest and established models = 0.146507 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.01824e-05 Jy ! Component: 100 - total flux cleaned = 8.92014e-05 Jy ! Component: 150 - total flux cleaned = 0.000122938 Jy ! Component: 200 - total flux cleaned = 0.00014441 Jy ! Total flux subtracted in 200 components = 0.00014441 Jy ! Clean residual min=-0.002377 max=0.001989 Jy/beam ! Clean residual mean=0.000001 rms=0.000590 Jy/beam ! Combined flux in latest and established models = 0.146652 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 72 components and 0.146652 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.647 mas, bmaj=5.705 mas, bpa=-3.727 degrees ! Estimated noise=674.578 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000167781 Jy ! Component: 100 - total flux cleaned = 5.07281e-05 Jy ! Component: 150 - total flux cleaned = 5.16132e-05 Jy ! Component: 200 - total flux cleaned = 5.17609e-05 Jy ! Total flux subtracted in 200 components = 5.17609e-05 Jy ! Clean residual min=-0.001915 max=0.001880 Jy/beam ! Clean residual mean=0.000001 rms=0.000461 Jy/beam ! Combined flux in latest and established models = 0.146703 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 86 components and 0.146703 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148737Jy sigma=0.000782 ! Fit after self-cal, rms=0.148721Jy sigma=0.000782 wmodel J1136+3407_S_2015_01_23_pus_map.mod ! Writing 86 model components to file: J1136+3407_S_2015_01_23_pus_map.mod wobs J1136+3407_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J1136+3407_S_2015_01_23_pus_uvs.fits wwins J1136+3407_S_2015_01_23_pus_map.win ! wwins: Wrote 2 windows to J1136+3407_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 2.80698e-05 Jy ! Component: 100 - total flux cleaned = 0.000409503 Jy ! Component: 150 - total flux cleaned = 0.000650903 Jy ! Component: 200 - total flux cleaned = 0.000796855 Jy ! Component: 250 - total flux cleaned = 0.000882322 Jy ! Component: 300 - total flux cleaned = 0.000936904 Jy ! Component: 350 - total flux cleaned = 0.000909713 Jy ! Component: 400 - total flux cleaned = 0.000857258 Jy ! Component: 450 - total flux cleaned = 0.000856911 Jy ! Component: 500 - total flux cleaned = 0.000856327 Jy ! Component: 550 - total flux cleaned = 0.000806984 Jy ! Component: 600 - total flux cleaned = 0.000807167 Jy ! Component: 650 - total flux cleaned = 0.000807031 Jy ! Component: 700 - total flux cleaned = 0.000761185 Jy ! Component: 750 - total flux cleaned = 0.000761479 Jy ! Component: 800 - total flux cleaned = 0.000761097 Jy ! Component: 850 - total flux cleaned = 0.000695311 Jy ! Component: 900 - total flux cleaned = 0.000652439 Jy ! Component: 950 - total flux cleaned = 0.000609951 Jy ! Component: 1000 - total flux cleaned = 0.000609835 Jy ! Component: 1050 - total flux cleaned = 0.000589074 Jy ! Component: 1100 - total flux cleaned = 0.000507376 Jy ! Component: 1150 - total flux cleaned = 0.000446658 Jy ! Component: 1200 - total flux cleaned = 0.000386975 Jy ! Component: 1250 - total flux cleaned = 0.000406753 Jy ! Component: 1300 - total flux cleaned = 0.000270556 Jy ! Component: 1350 - total flux cleaned = 0.00027077 Jy ! Component: 1400 - total flux cleaned = 0.000213862 Jy ! Component: 1450 - total flux cleaned = 0.000195366 Jy ! Component: 1500 - total flux cleaned = 0.000251285 Jy ! Component: 1550 - total flux cleaned = 0.000269798 Jy ! Component: 1600 - total flux cleaned = 0.00021535 Jy ! Component: 1650 - total flux cleaned = 0.000179348 Jy ! Component: 1700 - total flux cleaned = 7.24252e-05 Jy ! Component: 1750 - total flux cleaned = 3.72239e-05 Jy ! Component: 1800 - total flux cleaned = -5.03003e-05 Jy ! Component: 1850 - total flux cleaned = -0.000102322 Jy ! Component: 1900 - total flux cleaned = -0.000102401 Jy ! Component: 1950 - total flux cleaned = -0.000170778 Jy ! Component: 2000 - total flux cleaned = -0.000187453 Jy ! Component: 2050 - total flux cleaned = -0.000187711 Jy ! Component: 2100 - total flux cleaned = -0.000204161 Jy ! Component: 2150 - total flux cleaned = -0.000237296 Jy ! Component: 2200 - total flux cleaned = -0.000286619 Jy ! Component: 2250 - total flux cleaned = -0.000335466 Jy ! Component: 2300 - total flux cleaned = -0.000303148 Jy ! Component: 2350 - total flux cleaned = -0.000367193 Jy ! Component: 2400 - total flux cleaned = -0.000415063 Jy ! Component: 2450 - total flux cleaned = -0.000446729 Jy ! Component: 2500 - total flux cleaned = -0.000509683 Jy ! Component: 2550 - total flux cleaned = -0.00057165 Jy ! Component: 2600 - total flux cleaned = -0.000617963 Jy ! Component: 2650 - total flux cleaned = -0.000633237 Jy ! Component: 2700 - total flux cleaned = -0.000694165 Jy ! Component: 2750 - total flux cleaned = -0.000739665 Jy ! Component: 2800 - total flux cleaned = -0.000799673 Jy ! Component: 2850 - total flux cleaned = -0.000829438 Jy ! Component: 2900 - total flux cleaned = -0.000873858 Jy ! Component: 2950 - total flux cleaned = -0.00084446 Jy ! Component: 3000 - total flux cleaned = -0.000961534 Jy ! Component: 3050 - total flux cleaned = -0.00100501 Jy ! Component: 3100 - total flux cleaned = -0.00106263 Jy ! Component: 3150 - total flux cleaned = -0.00114871 Jy ! Component: 3200 - total flux cleaned = -0.00123413 Jy ! Component: 3250 - total flux cleaned = -0.00123417 Jy ! Component: 3300 - total flux cleaned = -0.00130441 Jy ! Component: 3350 - total flux cleaned = -0.00137428 Jy ! Component: 3400 - total flux cleaned = -0.00140188 Jy ! Component: 3450 - total flux cleaned = -0.00142941 Jy ! Component: 3500 - total flux cleaned = -0.00144318 Jy ! Component: 3550 - total flux cleaned = -0.00151144 Jy ! Component: 3600 - total flux cleaned = -0.00159268 Jy ! Component: 3650 - total flux cleaned = -0.00160629 Jy ! Component: 3700 - total flux cleaned = -0.00165982 Jy ! Component: 3750 - total flux cleaned = -0.00165991 Jy ! Component: 3800 - total flux cleaned = -0.00175273 Jy ! Component: 3850 - total flux cleaned = -0.00183175 Jy ! Component: 3900 - total flux cleaned = -0.00184492 Jy ! Component: 3950 - total flux cleaned = -0.00185802 Jy ! Component: 4000 - total flux cleaned = -0.00190975 Jy ! Component: 4050 - total flux cleaned = -0.00193544 Jy ! Total flux subtracted in 4096 components = -0.00189704 Jy ! Clean residual min=-0.000810 max=0.000711 Jy/beam ! Clean residual mean=0.000000 rms=0.000237 Jy/beam ! Combined flux in latest and established models = 0.144806 Jy keep ! Adding 296 model components to the UV plane model. ! The established model now contains 382 components and 0.144806 Jy ![Exited script file: muppet] wmap "J1136+3407_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.647 x 5.705 at -3.727 degrees (North through East) ! Clean map min=-0.0013667 max=0.13624 Jy/beam ! Writing clean map to FITS file: J1136+3407_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.136242 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000235089 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.51766 0.51766 1.03532 2.07064 4.14128 8.28256 16.5651 33.1302 66.2605 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.136 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.647 x 5.705 at -3.727 degrees (North through East) ! Clean map min=-0.0013667 max=0.13624 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1136+3407_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 19:23:26 2017