! Started logfile: J1135-3056_S_2014_08_09_pus_uvs.log on Tue Nov 29 23:03:41 2016 obs J1135-3056_S_2014_08_09_pus_uva.fits ! Reading UV FITS file: J1135-3056_S_2014_08_09_pus_uva.fits ! AN table 1: 122 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.875046 visibilities/baseline/integration-bin. ! Found source: J1135-3056 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 342 lines of history. ! ! Reading 19216 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1135-3056_S_2014_08_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 80 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 80 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 80 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 80 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.973991Jy sigma=0.007559 ! Fit after self-cal, rms=0.930527Jy sigma=0.007248 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.514 mas, bmaj=6.382 mas, bpa=-7.753 degrees ! Estimated noise=1220.27 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0572323 Jy ! Component: 100 - total flux cleaned = 0.0702806 Jy ! Total flux subtracted in 100 components = 0.0702806 Jy ! Clean residual min=-0.003625 max=0.004801 Jy/beam ! Clean residual mean=0.000003 rms=0.001092 Jy/beam ! Combined flux in latest and established models = 0.0702806 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.0702806 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109432Jy sigma=0.000777 ! Fit after self-cal, rms=0.109190Jy sigma=0.000776 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.167 mas, bmaj=8.024 mas, bpa=-6.673 degrees ! Estimated noise=667.789 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00721633 Jy ! Component: 100 - total flux cleaned = 0.0103639 Jy ! Component: 150 - total flux cleaned = 0.011991 Jy ! Component: 200 - total flux cleaned = 0.0128369 Jy ! Total flux subtracted in 200 components = 0.0128369 Jy ! Clean residual min=-0.002317 max=0.001987 Jy/beam ! Clean residual mean=-0.000003 rms=0.000578 Jy/beam ! Combined flux in latest and established models = 0.0831174 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 30 components and 0.0831174 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108738Jy sigma=0.000772 ! Fit after self-cal, rms=0.108784Jy sigma=0.000772 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.88 HN 1.03 KP 1.05 ! LA 1.07 MK 1.03 NL 1.06 OV 0.97 ! PT 1.00 SC 0.96 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.06 HN 1.00 KP 1.04 ! LA 1.03 MK 1.05 NL 1.10 OV 1.02 ! PT 1.00 SC 1.02 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.19 HN 1.07 KP 0.91 ! LA 0.76 MK 1.06 NL 1.05 OV 0.92 ! PT 1.00 SC 1.03 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.04 HN 1.13 KP 0.87 ! LA 0.82 MK 0.93 NL 1.07 OV 0.99 ! PT 1.02 SC 1.02 ! ! ! Fit before self-cal, rms=0.108784Jy sigma=0.000772 ! Fit after self-cal, rms=0.109191Jy sigma=0.000769 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.187 mas, bmaj=8.062 mas, bpa=-6.473 degrees ! Estimated noise=670.067 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000225545 Jy ! Component: 100 - total flux cleaned = 0.000242353 Jy ! Component: 150 - total flux cleaned = 0.000230184 Jy ! Component: 200 - total flux cleaned = 0.000218109 Jy ! Total flux subtracted in 200 components = 0.000218109 Jy ! Clean residual min=-0.001895 max=0.001879 Jy/beam ! Clean residual mean=-0.000002 rms=0.000478 Jy/beam ! Combined flux in latest and established models = 0.0833355 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 34 components and 0.0833355 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109187Jy sigma=0.000769 ! Fit after self-cal, rms=0.109244Jy sigma=0.000769 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109244Jy sigma=0.000769 ! Fit after self-cal, rms=0.110370Jy sigma=0.000768 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.185 mas, bmaj=8.087 mas, bpa=-6.396 degrees ! Estimated noise=671.89 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000370909 Jy ! Component: 100 - total flux cleaned = 0.00037097 Jy ! Component: 150 - total flux cleaned = 0.000371129 Jy ! Component: 200 - total flux cleaned = 0.000381056 Jy ! Total flux subtracted in 200 components = 0.000381056 Jy ! Clean residual min=-0.001794 max=0.001776 Jy/beam ! Clean residual mean=-0.000006 rms=0.000454 Jy/beam ! Combined flux in latest and established models = 0.0837166 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 37 components and 0.0837166 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110367Jy sigma=0.000768 ! Fit after self-cal, rms=0.110411Jy sigma=0.000768 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.68322e-05 Jy ! Component: 100 - total flux cleaned = 3.59469e-05 Jy ! Component: 150 - total flux cleaned = 3.6713e-05 Jy ! Component: 200 - total flux cleaned = 3.64362e-05 Jy ! Total flux subtracted in 200 components = 3.64362e-05 Jy ! Clean residual min=-0.001814 max=0.001794 Jy/beam ! Clean residual mean=-0.000006 rms=0.000455 Jy/beam ! Combined flux in latest and established models = 0.083753 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 38 components and 0.083753 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110409Jy sigma=0.000768 ! Fit after self-cal, rms=0.110411Jy sigma=0.000768 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110411Jy sigma=0.000768 ! Fit after self-cal, rms=0.111204Jy sigma=0.000768 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.184 mas, bmaj=8.11 mas, bpa=-6.301 degrees ! Estimated noise=672.079 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000115585 Jy ! Component: 100 - total flux cleaned = 0.000151441 Jy ! Component: 150 - total flux cleaned = 0.000161895 Jy ! Component: 200 - total flux cleaned = 0.00017159 Jy ! Total flux subtracted in 200 components = 0.00017159 Jy ! Clean residual min=-0.001729 max=0.001728 Jy/beam ! Clean residual mean=-0.000007 rms=0.000448 Jy/beam ! Combined flux in latest and established models = 0.0839246 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 42 components and 0.0839246 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111201Jy sigma=0.000768 ! Fit after self-cal, rms=0.111232Jy sigma=0.000768 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.92712e-05 Jy ! Component: 100 - total flux cleaned = 3.90542e-05 Jy ! Component: 150 - total flux cleaned = 2.86237e-05 Jy ! Component: 200 - total flux cleaned = 3.74431e-05 Jy ! Total flux subtracted in 200 components = 3.74431e-05 Jy ! Clean residual min=-0.001751 max=0.001751 Jy/beam ! Clean residual mean=-0.000007 rms=0.000448 Jy/beam ! Combined flux in latest and established models = 0.0839621 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 42 components and 0.0839621 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111229Jy sigma=0.000768 ! Fit after self-cal, rms=0.111230Jy sigma=0.000768 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111230Jy sigma=0.000768 ! Fit after self-cal, rms=0.111474Jy sigma=0.000768 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.448 mas, bmaj=21.41 mas, bpa=-3.837 degrees ! Estimated noise=823.404 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000228363 Jy ! Component: 100 - total flux cleaned = 0.000237541 Jy ! Component: 150 - total flux cleaned = 0.000245415 Jy ! Component: 200 - total flux cleaned = 0.000249146 Jy ! Total flux subtracted in 200 components = 0.000249146 Jy ! Clean residual min=-0.001811 max=0.001780 Jy/beam ! Clean residual mean=-0.000013 rms=0.000518 Jy/beam ! Combined flux in latest and established models = 0.0842112 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 48 components and 0.0842112 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111475Jy sigma=0.000768 ! Fit after self-cal, rms=0.111479Jy sigma=0.000768 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.47527e-06 Jy ! Component: 100 - total flux cleaned = 6.9373e-06 Jy ! Component: 150 - total flux cleaned = 1.05204e-05 Jy ! Component: 200 - total flux cleaned = 1.39679e-05 Jy ! Total flux subtracted in 200 components = 1.39679e-05 Jy ! Clean residual min=-0.001804 max=0.001778 Jy/beam ! Clean residual mean=-0.000013 rms=0.000517 Jy/beam ! Combined flux in latest and established models = 0.0842252 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 49 components and 0.0842252 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111480Jy sigma=0.000768 ! Fit after self-cal, rms=0.111480Jy sigma=0.000768 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.183 mas, bmaj=8.12 mas, bpa=-6.251 degrees ! Estimated noise=672.405 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.183 x 8.12 at -6.251 degrees (North through East) ! Clean map min=-0.0016346 max=0.073226 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.52 mas, bmaj=6.414 mas, bpa=-7.209 degrees ! Estimated noise=1248.32 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0576115 Jy ! Component: 100 - total flux cleaned = 0.0709663 Jy ! Component: 150 - total flux cleaned = 0.0765119 Jy ! Component: 200 - total flux cleaned = 0.0797168 Jy ! Total flux subtracted in 200 components = 0.0797168 Jy ! Clean residual min=-0.003863 max=0.004128 Jy/beam ! Clean residual mean=-0.000001 rms=0.000999 Jy/beam ! Combined flux in latest and established models = 0.0797168 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.0797168 Jy ! Inverting map and beam ! Estimated beam: bmin=3.183 mas, bmaj=8.12 mas, bpa=-6.251 degrees ! Estimated noise=672.405 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00249817 Jy ! Component: 100 - total flux cleaned = 0.00353524 Jy ! Component: 150 - total flux cleaned = 0.00401792 Jy ! Component: 200 - total flux cleaned = 0.00409095 Jy ! Total flux subtracted in 200 components = 0.00409095 Jy ! Clean residual min=-0.001751 max=0.001697 Jy/beam ! Clean residual mean=-0.000007 rms=0.000451 Jy/beam ! Combined flux in latest and established models = 0.0838077 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 28 components and 0.0838077 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.448 mas, bmaj=21.41 mas, bpa=-3.837 degrees ! Estimated noise=823.404 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000279732 Jy ! Component: 100 - total flux cleaned = 0.000306337 Jy ! Component: 150 - total flux cleaned = 0.000315174 Jy ! Component: 200 - total flux cleaned = 0.000323044 Jy ! Total flux subtracted in 200 components = 0.000323044 Jy ! Clean residual min=-0.001799 max=0.001777 Jy/beam ! Clean residual mean=-0.000013 rms=0.000518 Jy/beam ! Combined flux in latest and established models = 0.0841308 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.76446e-06 Jy ! Component: 100 - total flux cleaned = 1.11551e-05 Jy ! Component: 150 - total flux cleaned = 1.47267e-05 Jy ! Component: 200 - total flux cleaned = 2.16961e-05 Jy ! Total flux subtracted in 200 components = 2.16961e-05 Jy ! Clean residual min=-0.001799 max=0.001778 Jy/beam ! Clean residual mean=-0.000013 rms=0.000517 Jy/beam ! Combined flux in latest and established models = 0.0841525 Jy ! Adding 9 model components to the UV plane model. ! The established model now contains 34 components and 0.0841525 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.183 mas, bmaj=8.12 mas, bpa=-6.251 degrees ! Estimated noise=672.405 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000212591 Jy ! Component: 100 - total flux cleaned = -0.000224512 Jy ! Component: 150 - total flux cleaned = -0.000223902 Jy ! Component: 200 - total flux cleaned = -0.000223899 Jy ! Total flux subtracted in 200 components = -0.000223899 Jy ! Clean residual min=-0.001745 max=0.001702 Jy/beam ! Clean residual mean=-0.000007 rms=0.000450 Jy/beam ! Combined flux in latest and established models = 0.0839286 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 38 components and 0.0839286 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111494Jy sigma=0.000768 ! Fit after self-cal, rms=0.111463Jy sigma=0.000768 wmodel J1135-3056_S_2014_08_09_pus_map.mod ! Writing 38 model components to file: J1135-3056_S_2014_08_09_pus_map.mod wobs J1135-3056_S_2014_08_09_pus_uvs.fits ! Writing UV FITS file: J1135-3056_S_2014_08_09_pus_uvs.fits wwins J1135-3056_S_2014_08_09_pus_map.win ! wwins: Wrote 1 windows to J1135-3056_S_2014_08_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -6.65082e-05 Jy ! Component: 100 - total flux cleaned = -6.51165e-06 Jy ! Component: 150 - total flux cleaned = -0.000121017 Jy ! Component: 200 - total flux cleaned = -0.000286097 Jy ! Component: 250 - total flux cleaned = -0.000445844 Jy ! Component: 300 - total flux cleaned = -0.000523616 Jy ! Component: 350 - total flux cleaned = -0.000624601 Jy ! Component: 400 - total flux cleaned = -0.000648892 Jy ! Component: 450 - total flux cleaned = -0.000648971 Jy ! Component: 500 - total flux cleaned = -0.000720369 Jy ! Component: 550 - total flux cleaned = -0.000790226 Jy ! Component: 600 - total flux cleaned = -0.000950405 Jy ! Component: 650 - total flux cleaned = -0.000927694 Jy ! Component: 700 - total flux cleaned = -0.00101742 Jy ! Component: 750 - total flux cleaned = -0.00117119 Jy ! Component: 800 - total flux cleaned = -0.00125777 Jy ! Component: 850 - total flux cleaned = -0.00136424 Jy ! Component: 900 - total flux cleaned = -0.0014478 Jy ! Component: 950 - total flux cleaned = -0.00144763 Jy ! Component: 1000 - total flux cleaned = -0.00146822 Jy ! Component: 1050 - total flux cleaned = -0.00158947 Jy ! Component: 1100 - total flux cleaned = -0.00164866 Jy ! Component: 1150 - total flux cleaned = -0.0016878 Jy ! Component: 1200 - total flux cleaned = -0.001727 Jy ! Component: 1250 - total flux cleaned = -0.00184183 Jy ! Component: 1300 - total flux cleaned = -0.00191737 Jy ! Component: 1350 - total flux cleaned = -0.00193603 Jy ! Component: 1400 - total flux cleaned = -0.00206528 Jy ! Component: 1450 - total flux cleaned = -0.00212011 Jy ! Component: 1500 - total flux cleaned = -0.00221007 Jy ! Component: 1550 - total flux cleaned = -0.00228144 Jy ! Component: 1600 - total flux cleaned = -0.00245757 Jy ! Component: 1650 - total flux cleaned = -0.00238771 Jy ! Component: 1700 - total flux cleaned = -0.0024911 Jy ! Component: 1750 - total flux cleaned = -0.0024739 Jy ! Component: 1800 - total flux cleaned = -0.00259248 Jy ! Component: 1850 - total flux cleaned = -0.00269293 Jy ! Component: 1900 - total flux cleaned = -0.00269264 Jy ! Component: 1950 - total flux cleaned = -0.002742 Jy ! Component: 2000 - total flux cleaned = -0.00279064 Jy ! Component: 2050 - total flux cleaned = -0.00279047 Jy ! Component: 2100 - total flux cleaned = -0.00285447 Jy ! Component: 2150 - total flux cleaned = -0.00285434 Jy ! Component: 2200 - total flux cleaned = -0.00294843 Jy ! Component: 2250 - total flux cleaned = -0.00301055 Jy ! Component: 2300 - total flux cleaned = -0.00304147 Jy ! Component: 2350 - total flux cleaned = -0.00308741 Jy ! Component: 2400 - total flux cleaned = -0.00308758 Jy ! Component: 2450 - total flux cleaned = -0.00313269 Jy ! Component: 2500 - total flux cleaned = -0.00320715 Jy ! Component: 2550 - total flux cleaned = -0.00320709 Jy ! Component: 2600 - total flux cleaned = -0.00326568 Jy ! Component: 2650 - total flux cleaned = -0.00329488 Jy ! Component: 2700 - total flux cleaned = -0.0033383 Jy ! Component: 2750 - total flux cleaned = -0.00340984 Jy ! Component: 2800 - total flux cleaned = -0.00345234 Jy ! Component: 2850 - total flux cleaned = -0.00352253 Jy ! Component: 2900 - total flux cleaned = -0.0035226 Jy ! Component: 2950 - total flux cleaned = -0.00359166 Jy ! Component: 3000 - total flux cleaned = -0.00360535 Jy ! Component: 3050 - total flux cleaned = -0.00364614 Jy ! Component: 3100 - total flux cleaned = -0.00363265 Jy ! Component: 3150 - total flux cleaned = -0.00367302 Jy ! Component: 3200 - total flux cleaned = -0.0036597 Jy ! Component: 3250 - total flux cleaned = -0.0036863 Jy ! Component: 3300 - total flux cleaned = -0.00369943 Jy ! Component: 3350 - total flux cleaned = -0.00375155 Jy ! Component: 3400 - total flux cleaned = -0.00373855 Jy ! Component: 3450 - total flux cleaned = -0.00377701 Jy ! Component: 3500 - total flux cleaned = -0.0038281 Jy ! Component: 3550 - total flux cleaned = -0.00389127 Jy ! Component: 3600 - total flux cleaned = -0.00394161 Jy ! Component: 3650 - total flux cleaned = -0.00399148 Jy ! Component: 3700 - total flux cleaned = -0.0040536 Jy ! Component: 3750 - total flux cleaned = -0.00410293 Jy ! Component: 3800 - total flux cleaned = -0.00416416 Jy ! Component: 3850 - total flux cleaned = -0.00422499 Jy ! Component: 3900 - total flux cleaned = -0.00427352 Jy ! Component: 3950 - total flux cleaned = -0.00430951 Jy ! Component: 4000 - total flux cleaned = -0.0043692 Jy ! Component: 4050 - total flux cleaned = -0.00446378 Jy ! Total flux subtracted in 4096 components = -0.00447563 Jy ! Clean residual min=-0.000632 max=0.000749 Jy/beam ! Clean residual mean=-0.000002 rms=0.000210 Jy/beam ! Combined flux in latest and established models = 0.079453 Jy keep ! Adding 259 model components to the UV plane model. ! The established model now contains 297 components and 0.079453 Jy ![Exited script file: muppet] wmap "J1135-3056_S_2014_08_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.183 x 8.12 at -6.251 degrees (North through East) ! Clean map min=-0.0013493 max=0.073481 Jy/beam ! Writing clean map to FITS file: J1135-3056_S_2014_08_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0734807 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000209125 device "J1135-3056_S_2014_08_09_pus\_map.eps/VPS" ! Attempting to open device: 'J1135-3056_S_2014_08_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.853796 0.853796 1.70759 3.41518 6.83036 13.6607 27.3215 54.6429 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.073 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.183 x 8.12 at -6.251 degrees (North through East) ! Clean map min=-0.0013493 max=0.073481 Jy/beam quit ! Quitting program ! Log file J1135-3056_S_2014_08_09_pus_uvs.log closed on Tue Nov 29 23:03:46 2016