! Started logfile: J1133+0040_S_2015_03_17_pus_uvs.log on Fri Dec 30 22:57:48 2016 obs J1133+0040_S_2015_03_17_pus_uva.fits ! Reading UV FITS file: J1133+0040_S_2015_03_17_pus_uva.fits ! AN table 1: 15 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.90963 visibilities/baseline/integration-bin. ! Found source: J1133+0040 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 330 lines of history. ! ! Reading 2456 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1133+0040_S_2015_03_17_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.647258Jy sigma=0.007363 ! Fit after self-cal, rms=0.643338Jy sigma=0.007323 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.559 mas, bmaj=6.696 mas, bpa=-3.126 degrees ! Estimated noise=1546.41 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.268012 Jy ! Component: 100 - total flux cleaned = 0.334464 Jy ! Total flux subtracted in 100 components = 0.334464 Jy ! Clean residual min=-0.017946 max=0.028013 Jy/beam ! Clean residual mean=-0.000014 rms=0.004755 Jy/beam ! Combined flux in latest and established models = 0.334464 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.334464 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107171Jy sigma=0.001096 ! Fit after self-cal, rms=0.107157Jy sigma=0.001096 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.967 mas, bmaj=7.505 mas, bpa=-3.36 degrees ! Estimated noise=1289.13 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0403964 Jy ! Component: 100 - total flux cleaned = 0.0617691 Jy ! Component: 150 - total flux cleaned = 0.0745834 Jy ! Component: 200 - total flux cleaned = 0.082621 Jy ! Total flux subtracted in 200 components = 0.082621 Jy ! Clean residual min=-0.013215 max=0.016783 Jy/beam ! Clean residual mean=0.000006 rms=0.003583 Jy/beam ! Combined flux in latest and established models = 0.417085 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 44 components and 0.417085 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088133Jy sigma=0.000930 ! Fit after self-cal, rms=0.088066Jy sigma=0.000930 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.88 HN 0.96 KP 1.07 ! LA 0.93 MK 1.00 NL 0.94 OV 1.04 ! PT 1.07 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.88 HN 1.00 KP 1.06 ! LA 0.95 MK 1.04 NL 1.01 OV 1.07 ! PT 1.07 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.92 HN 0.99 KP 0.95 ! LA 0.78 MK 1.09 NL 1.11 OV 0.97 ! PT 1.06 SC 1.06 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 0.96 HN 1.00 KP 0.90 ! LA 0.84 MK 1.10 NL 1.00 OV 1.02 ! PT 1.11 SC 0.99 ! ! ! Fit before self-cal, rms=0.088066Jy sigma=0.000930 ! Fit after self-cal, rms=0.075078Jy sigma=0.000822 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.013 mas, bmaj=7.603 mas, bpa=-3.139 degrees ! Estimated noise=1289.16 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (7, -8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0132964 Jy ! Component: 100 - total flux cleaned = 0.0170171 Jy ! Component: 150 - total flux cleaned = 0.0173643 Jy ! Component: 200 - total flux cleaned = 0.0176267 Jy ! Total flux subtracted in 200 components = 0.0176267 Jy ! Clean residual min=-0.006606 max=0.004735 Jy/beam ! Clean residual mean=0.000007 rms=0.001398 Jy/beam ! Combined flux in latest and established models = 0.434712 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 69 components and 0.434712 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072785Jy sigma=0.000796 ! Fit after self-cal, rms=0.072710Jy sigma=0.000795 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072710Jy sigma=0.000795 ! Fit after self-cal, rms=0.072268Jy sigma=0.000794 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.013 mas, bmaj=7.604 mas, bpa=-3.223 degrees ! Estimated noise=1282.15 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00153363 Jy ! Component: 100 - total flux cleaned = 0.00188343 Jy ! Component: 150 - total flux cleaned = 0.00188815 Jy ! Component: 200 - total flux cleaned = 0.0019747 Jy ! Total flux subtracted in 200 components = 0.0019747 Jy ! Clean residual min=-0.005599 max=0.004357 Jy/beam ! Clean residual mean=0.000006 rms=0.001224 Jy/beam ! Combined flux in latest and established models = 0.436686 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 85 components and 0.436686 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071964Jy sigma=0.000791 ! Fit after self-cal, rms=0.071950Jy sigma=0.000790 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000556132 Jy ! Component: 100 - total flux cleaned = 0.000620921 Jy ! Component: 150 - total flux cleaned = 0.000619134 Jy ! Component: 200 - total flux cleaned = 0.000734073 Jy ! Total flux subtracted in 200 components = 0.000734073 Jy ! Clean residual min=-0.005321 max=0.004182 Jy/beam ! Clean residual mean=0.000006 rms=0.001166 Jy/beam ! Combined flux in latest and established models = 0.43742 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 97 components and 0.43742 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071841Jy sigma=0.000789 ! Fit after self-cal, rms=0.071833Jy sigma=0.000789 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071833Jy sigma=0.000789 ! Fit after self-cal, rms=0.071722Jy sigma=0.000789 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.019 mas, bmaj=7.608 mas, bpa=-3.183 degrees ! Estimated noise=1280.54 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000486975 Jy ! Component: 100 - total flux cleaned = -0.000356579 Jy ! Component: 150 - total flux cleaned = -0.000240279 Jy ! Component: 200 - total flux cleaned = -9.41952e-05 Jy ! Total flux subtracted in 200 components = -9.41952e-05 Jy ! Clean residual min=-0.004900 max=0.003968 Jy/beam ! Clean residual mean=0.000005 rms=0.001103 Jy/beam ! Combined flux in latest and established models = 0.437326 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 117 components and 0.437326 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071632Jy sigma=0.000787 ! Fit after self-cal, rms=0.071626Jy sigma=0.000787 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000291687 Jy ! Component: 100 - total flux cleaned = 0.000333766 Jy ! Component: 150 - total flux cleaned = 0.000255491 Jy ! Component: 200 - total flux cleaned = 0.000256957 Jy ! Total flux subtracted in 200 components = 0.000256957 Jy ! Clean residual min=-0.004834 max=0.003984 Jy/beam ! Clean residual mean=0.000005 rms=0.001083 Jy/beam ! Combined flux in latest and established models = 0.437583 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 122 components and 0.437583 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071588Jy sigma=0.000787 ! Fit after self-cal, rms=0.071584Jy sigma=0.000787 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071584Jy sigma=0.000787 ! Fit after self-cal, rms=0.071539Jy sigma=0.000787 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.17 mas, bmaj=12.07 mas, bpa=-6.018 degrees ! Estimated noise=1711.07 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00244692 Jy ! Component: 100 - total flux cleaned = -0.003003 Jy ! Component: 150 - total flux cleaned = -0.0034368 Jy ! Component: 200 - total flux cleaned = -0.00377694 Jy ! Total flux subtracted in 200 components = -0.00377694 Jy ! Clean residual min=-0.004842 max=0.003906 Jy/beam ! Clean residual mean=0.000010 rms=0.001146 Jy/beam ! Combined flux in latest and established models = 0.433806 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 127 components and 0.433806 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071536Jy sigma=0.000786 ! Fit after self-cal, rms=0.071534Jy sigma=0.000786 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.26384e-05 Jy ! Component: 100 - total flux cleaned = -0.000208119 Jy ! Component: 150 - total flux cleaned = -0.000265544 Jy ! Component: 200 - total flux cleaned = -0.000318481 Jy ! Total flux subtracted in 200 components = -0.000318481 Jy ! Clean residual min=-0.004702 max=0.003796 Jy/beam ! Clean residual mean=0.000010 rms=0.001109 Jy/beam ! Combined flux in latest and established models = 0.433488 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 133 components and 0.433488 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071551Jy sigma=0.000787 ! Fit after self-cal, rms=0.071551Jy sigma=0.000787 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.026 mas, bmaj=7.614 mas, bpa=-3.132 degrees ! Estimated noise=1279.88 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.026 x 7.614 at -3.132 degrees (North through East) ! Clean map min=-0.0043329 max=0.35101 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.604 mas, bmaj=6.767 mas, bpa=-2.807 degrees ! Estimated noise=1548.42 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.268283 Jy ! Component: 100 - total flux cleaned = 0.331284 Jy ! Component: 150 - total flux cleaned = 0.359519 Jy ! Component: 200 - total flux cleaned = 0.377045 Jy ! Total flux subtracted in 200 components = 0.377045 Jy ! Clean residual min=-0.007845 max=0.010152 Jy/beam ! Clean residual mean=-0.000001 rms=0.002272 Jy/beam ! Combined flux in latest and established models = 0.377045 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.377045 Jy ! Inverting map and beam ! Estimated beam: bmin=3.026 mas, bmaj=7.614 mas, bpa=-3.132 degrees ! Estimated noise=1279.88 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0169443 Jy ! Component: 100 - total flux cleaned = 0.0282879 Jy ! Component: 150 - total flux cleaned = 0.0362914 Jy ! Component: 200 - total flux cleaned = 0.0421095 Jy ! Total flux subtracted in 200 components = 0.0421095 Jy ! Clean residual min=-0.004621 max=0.005102 Jy/beam ! Clean residual mean=0.000007 rms=0.001295 Jy/beam ! Combined flux in latest and established models = 0.419155 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 64 components and 0.419155 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.17 mas, bmaj=12.07 mas, bpa=-6.018 degrees ! Estimated noise=1711.07 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00692319 Jy ! Component: 100 - total flux cleaned = 0.0107953 Jy ! Component: 150 - total flux cleaned = 0.0123111 Jy ! Component: 200 - total flux cleaned = 0.0130326 Jy ! Total flux subtracted in 200 components = 0.0130326 Jy ! Clean residual min=-0.005278 max=0.003759 Jy/beam ! Clean residual mean=0.000011 rms=0.001173 Jy/beam ! Combined flux in latest and established models = 0.432187 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000501379 Jy ! Component: 100 - total flux cleaned = 0.00064044 Jy ! Component: 150 - total flux cleaned = 0.000801846 Jy ! Component: 200 - total flux cleaned = 0.000941595 Jy ! Total flux subtracted in 200 components = 0.000941595 Jy ! Clean residual min=-0.004939 max=0.003706 Jy/beam ! Clean residual mean=0.000010 rms=0.001114 Jy/beam ! Combined flux in latest and established models = 0.433129 Jy ! Adding 59 model components to the UV plane model. ! The established model now contains 122 components and 0.433129 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.026 mas, bmaj=7.614 mas, bpa=-3.132 degrees ! Estimated noise=1279.88 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000405166 Jy ! Component: 100 - total flux cleaned = 0.000682799 Jy ! Component: 150 - total flux cleaned = 0.000752058 Jy ! Component: 200 - total flux cleaned = 0.000950929 Jy ! Total flux subtracted in 200 components = 0.000950929 Jy ! Clean residual min=-0.004095 max=0.003984 Jy/beam ! Clean residual mean=0.000005 rms=0.001052 Jy/beam ! Combined flux in latest and established models = 0.43408 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 140 components and 0.43408 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071553Jy sigma=0.000786 ! Fit after self-cal, rms=0.071522Jy sigma=0.000786 wmodel J1133+0040_S_2015_03_17_pus_map.mod ! Writing 140 model components to file: J1133+0040_S_2015_03_17_pus_map.mod wobs J1133+0040_S_2015_03_17_pus_uvs.fits ! Writing UV FITS file: J1133+0040_S_2015_03_17_pus_uvs.fits wwins J1133+0040_S_2015_03_17_pus_map.win ! wwins: Wrote 2 windows to J1133+0040_S_2015_03_17_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000939453 Jy ! Component: 100 - total flux cleaned = -0.000875285 Jy ! Component: 150 - total flux cleaned = -0.000678911 Jy ! Component: 200 - total flux cleaned = -0.000491921 Jy ! Component: 250 - total flux cleaned = -0.000373882 Jy ! Component: 300 - total flux cleaned = -0.000258544 Jy ! Component: 350 - total flux cleaned = -3.59949e-05 Jy ! Component: 400 - total flux cleaned = 0.00012723 Jy ! Component: 450 - total flux cleaned = 0.000391228 Jy ! Component: 500 - total flux cleaned = 0.000745907 Jy ! Component: 550 - total flux cleaned = 0.000843966 Jy ! Component: 600 - total flux cleaned = 0.0012275 Jy ! Component: 650 - total flux cleaned = 0.00146042 Jy ! Component: 700 - total flux cleaned = 0.00177994 Jy ! Component: 750 - total flux cleaned = 0.00200251 Jy ! Component: 800 - total flux cleaned = 0.00235224 Jy ! Component: 850 - total flux cleaned = 0.00265182 Jy ! Component: 900 - total flux cleaned = 0.00286112 Jy ! Component: 950 - total flux cleaned = 0.00298386 Jy ! Component: 1000 - total flux cleaned = 0.00314514 Jy ! Component: 1050 - total flux cleaned = 0.0035404 Jy ! Component: 1100 - total flux cleaned = 0.00365663 Jy ! Component: 1150 - total flux cleaned = 0.00399927 Jy ! Component: 1200 - total flux cleaned = 0.00414874 Jy ! Component: 1250 - total flux cleaned = 0.00436986 Jy ! Component: 1300 - total flux cleaned = 0.00458755 Jy ! Component: 1350 - total flux cleaned = 0.00476643 Jy ! Component: 1400 - total flux cleaned = 0.00497726 Jy ! Component: 1450 - total flux cleaned = 0.00518479 Jy ! Component: 1500 - total flux cleaned = 0.00532037 Jy ! Component: 1550 - total flux cleaned = 0.00555511 Jy ! Component: 1600 - total flux cleaned = 0.00571929 Jy ! Component: 1650 - total flux cleaned = 0.00575171 Jy ! Component: 1700 - total flux cleaned = 0.00594408 Jy ! Component: 1750 - total flux cleaned = 0.00600736 Jy ! Component: 1800 - total flux cleaned = 0.00613238 Jy ! Component: 1850 - total flux cleaned = 0.00622423 Jy ! Component: 1900 - total flux cleaned = 0.00616318 Jy ! Component: 1950 - total flux cleaned = 0.00628291 Jy ! Component: 2000 - total flux cleaned = 0.00631223 Jy ! Component: 2050 - total flux cleaned = 0.00634141 Jy ! Component: 2100 - total flux cleaned = 0.00631307 Jy ! Component: 2150 - total flux cleaned = 0.00642613 Jy ! Component: 2200 - total flux cleaned = 0.0064818 Jy ! Component: 2250 - total flux cleaned = 0.00645394 Jy ! Component: 2300 - total flux cleaned = 0.00642689 Jy ! Component: 2350 - total flux cleaned = 0.00653471 Jy ! Component: 2400 - total flux cleaned = 0.00648187 Jy ! Component: 2450 - total flux cleaned = 0.00650839 Jy ! Component: 2500 - total flux cleaned = 0.00653416 Jy ! Component: 2550 - total flux cleaned = 0.0064835 Jy ! Component: 2600 - total flux cleaned = 0.00655921 Jy ! Component: 2650 - total flux cleaned = 0.00655898 Jy ! Component: 2700 - total flux cleaned = 0.00655863 Jy ! Component: 2750 - total flux cleaned = 0.00663176 Jy ! Component: 2800 - total flux cleaned = 0.00663187 Jy ! Component: 2850 - total flux cleaned = 0.00672687 Jy ! Component: 2900 - total flux cleaned = 0.00672664 Jy ! Component: 2950 - total flux cleaned = 0.00677345 Jy ! Component: 3000 - total flux cleaned = 0.00679617 Jy ! Component: 3050 - total flux cleaned = 0.00679641 Jy ! Component: 3100 - total flux cleaned = 0.00675085 Jy ! Component: 3150 - total flux cleaned = 0.00679555 Jy ! Component: 3200 - total flux cleaned = 0.00681762 Jy ! Component: 3250 - total flux cleaned = 0.00679572 Jy ! Component: 3300 - total flux cleaned = 0.0068181 Jy ! Component: 3350 - total flux cleaned = 0.006818 Jy ! Component: 3400 - total flux cleaned = 0.00679677 Jy ! Component: 3450 - total flux cleaned = 0.00683865 Jy ! Component: 3500 - total flux cleaned = 0.00681793 Jy ! Component: 3550 - total flux cleaned = 0.00679715 Jy ! Component: 3600 - total flux cleaned = 0.00671555 Jy ! Component: 3650 - total flux cleaned = 0.00671608 Jy ! Component: 3700 - total flux cleaned = 0.0068164 Jy ! Component: 3750 - total flux cleaned = 0.0067767 Jy ! Component: 3800 - total flux cleaned = 0.00685557 Jy ! Component: 3850 - total flux cleaned = 0.00685581 Jy ! Component: 3900 - total flux cleaned = 0.00689455 Jy ! Component: 3950 - total flux cleaned = 0.00697145 Jy ! Component: 4000 - total flux cleaned = 0.00699044 Jy ! Component: 4050 - total flux cleaned = 0.00700944 Jy ! Total flux subtracted in 4096 components = 0.00702832 Jy ! Clean residual min=-0.001072 max=0.001035 Jy/beam ! Clean residual mean=0.000001 rms=0.000339 Jy/beam ! Combined flux in latest and established models = 0.441108 Jy keep ! Adding 281 model components to the UV plane model. ! The established model now contains 421 components and 0.441108 Jy ![Exited script file: muppet] wmap "J1133+0040_S_2015_03_17_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.026 x 7.614 at -3.132 degrees (North through East) ! Clean map min=-0.0026578 max=0.35242 Jy/beam ! Writing clean map to FITS file: J1133+0040_S_2015_03_17_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.352417 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000335193 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.285338 0.285338 0.570675 1.14135 2.2827 4.5654 9.13081 18.2616 36.5232 73.0464 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.352 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.026 x 7.614 at -3.132 degrees (North through East) ! Clean map min=-0.0026578 max=0.35242 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1133+0040_S_2015_03_17_pus_uvs.log closed on Fri Dec 30 22:57:52 2016