! Started logfile: J1133+0015_S_2015_01_22_pus_uvs.log on Tue Jan 3 22:51:34 2017 obs J1133+0015_S_2015_01_22_pus_uva.fits ! Reading UV FITS file: J1133+0015_S_2015_01_22_pus_uva.fits ! AN table 1: 30 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.622222 visibilities/baseline/integration-bin. ! Found source: J1133+0015 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 281 lines of history. ! ! Reading 3360 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1133+0015_S_2015_01_22_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 60 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 60 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 60 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 60 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.778202Jy sigma=0.008526 ! Fit after self-cal, rms=0.766003Jy sigma=0.008396 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.417 mas, bmaj=11.94 mas, bpa=-24.74 degrees ! Estimated noise=1646.92 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.198088 Jy ! Component: 100 - total flux cleaned = 0.256952 Jy ! Total flux subtracted in 100 components = 0.256952 Jy ! Clean residual min=-0.024725 max=0.035583 Jy/beam ! Clean residual mean=-0.000193 rms=0.008370 Jy/beam ! Combined flux in latest and established models = 0.256952 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.256952 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128989Jy sigma=0.001139 ! Fit after self-cal, rms=0.128931Jy sigma=0.001138 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.196 mas, bmaj=11.91 mas, bpa=-23.55 degrees ! Estimated noise=1154.02 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0341219 Jy ! Component: 100 - total flux cleaned = 0.0533262 Jy ! Component: 150 - total flux cleaned = 0.0656313 Jy ! Component: 200 - total flux cleaned = 0.0738175 Jy ! Total flux subtracted in 200 components = 0.0738175 Jy ! Clean residual min=-0.022133 max=0.020596 Jy/beam ! Clean residual mean=-0.000150 rms=0.006002 Jy/beam ! Combined flux in latest and established models = 0.330769 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 36 components and 0.330769 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119494Jy sigma=0.001008 ! Fit after self-cal, rms=0.119382Jy sigma=0.001006 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00* HN 1.73 KP 1.05 ! LA 1.01 MK 1.07 NL 1.14 OV 0.89 ! PT 1.00 SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.00* HN 1.70 KP 0.98 ! LA 1.01 MK 1.05 NL 1.28 OV 0.92 ! PT 0.99 SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.00* HN 1.87 KP 0.84 ! LA 0.78 MK 1.08 NL 1.29 OV 0.85 ! PT 0.97 SC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.00* HN 2.17 KP 0.78 ! LA 0.90 MK 1.04 NL 0.68 OV 0.93 ! PT 0.99 SC 1.00* ! ! ! Fit before self-cal, rms=0.119382Jy sigma=0.001006 ! Fit after self-cal, rms=0.148132Jy sigma=0.000816 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.32 mas, bmaj=11.78 mas, bpa=-23.13 degrees ! Estimated noise=1197.97 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00719482 Jy ! Component: 100 - total flux cleaned = -0.00722346 Jy ! Component: 150 - total flux cleaned = -0.0076345 Jy ! Component: 200 - total flux cleaned = -0.00812078 Jy ! Total flux subtracted in 200 components = -0.00812078 Jy ! Clean residual min=-0.009747 max=0.009589 Jy/beam ! Clean residual mean=-0.000070 rms=0.002422 Jy/beam ! Combined flux in latest and established models = 0.322649 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 43 components and 0.322649 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146633Jy sigma=0.000802 ! Fit after self-cal, rms=0.146770Jy sigma=0.000801 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146770Jy sigma=0.000801 ! Fit after self-cal, rms=0.146465Jy sigma=0.000797 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.333 mas, bmaj=11.73 mas, bpa=-23.05 degrees ! Estimated noise=1198.11 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00518207 Jy ! Component: 100 - total flux cleaned = -0.00550583 Jy ! Component: 150 - total flux cleaned = -0.00606658 Jy ! Component: 200 - total flux cleaned = -0.00643215 Jy ! Total flux subtracted in 200 components = -0.00643215 Jy ! Clean residual min=-0.008492 max=0.007945 Jy/beam ! Clean residual mean=-0.000060 rms=0.002056 Jy/beam ! Combined flux in latest and established models = 0.316216 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 47 components and 0.316216 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.145731Jy sigma=0.000792 ! Fit after self-cal, rms=0.145692Jy sigma=0.000792 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00060152 Jy ! Component: 100 - total flux cleaned = -0.000993353 Jy ! Component: 150 - total flux cleaned = -0.00125612 Jy ! Component: 200 - total flux cleaned = -0.00133159 Jy ! Total flux subtracted in 200 components = -0.00133159 Jy ! Clean residual min=-0.008110 max=0.007462 Jy/beam ! Clean residual mean=-0.000066 rms=0.002026 Jy/beam ! Combined flux in latest and established models = 0.314885 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 50 components and 0.314885 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.145446Jy sigma=0.000791 ! Fit after self-cal, rms=0.145443Jy sigma=0.000791 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.145443Jy sigma=0.000791 ! Fit after self-cal, rms=0.146738Jy sigma=0.000788 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.35 mas, bmaj=11.69 mas, bpa=-22.97 degrees ! Estimated noise=1199.36 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00330601 Jy ! Component: 100 - total flux cleaned = -0.00375467 Jy ! Component: 150 - total flux cleaned = -0.00441755 Jy ! Component: 200 - total flux cleaned = -0.0047584 Jy ! Total flux subtracted in 200 components = -0.0047584 Jy ! Clean residual min=-0.007288 max=0.006635 Jy/beam ! Clean residual mean=-0.000053 rms=0.001776 Jy/beam ! Combined flux in latest and established models = 0.310126 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 54 components and 0.310126 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146334Jy sigma=0.000787 ! Fit after self-cal, rms=0.146340Jy sigma=0.000787 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000404616 Jy ! Component: 100 - total flux cleaned = -0.000623018 Jy ! Component: 150 - total flux cleaned = -0.000830262 Jy ! Component: 200 - total flux cleaned = -0.000960806 Jy ! Total flux subtracted in 200 components = -0.000960806 Jy ! Clean residual min=-0.006972 max=0.006393 Jy/beam ! Clean residual mean=-0.000057 rms=0.001758 Jy/beam ! Combined flux in latest and established models = 0.309166 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 64 components and 0.309166 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146191Jy sigma=0.000786 ! Fit after self-cal, rms=0.146199Jy sigma=0.000786 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146199Jy sigma=0.000786 ! Fit after self-cal, rms=0.147913Jy sigma=0.000785 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.343 mas, bmaj=13.16 mas, bpa=0.8114 degrees ! Estimated noise=1398.58 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00293991 Jy ! Component: 100 - total flux cleaned = -0.00320457 Jy ! Component: 150 - total flux cleaned = -0.00351776 Jy ! Component: 200 - total flux cleaned = -0.0038683 Jy ! Total flux subtracted in 200 components = -0.0038683 Jy ! Clean residual min=-0.007848 max=0.007739 Jy/beam ! Clean residual mean=-0.000081 rms=0.002273 Jy/beam ! Combined flux in latest and established models = 0.305297 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 73 components and 0.305297 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147650Jy sigma=0.000784 ! Fit after self-cal, rms=0.147676Jy sigma=0.000784 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000331181 Jy ! Component: 100 - total flux cleaned = -0.000637677 Jy ! Component: 150 - total flux cleaned = -0.000808571 Jy ! Component: 200 - total flux cleaned = -0.000970398 Jy ! Total flux subtracted in 200 components = -0.000970398 Jy ! Clean residual min=-0.007786 max=0.007960 Jy/beam ! Clean residual mean=-0.000089 rms=0.002280 Jy/beam ! Combined flux in latest and established models = 0.304327 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 78 components and 0.304327 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147569Jy sigma=0.000784 ! Fit after self-cal, rms=0.147576Jy sigma=0.000784 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.356 mas, bmaj=11.66 mas, bpa=-22.93 degrees ! Estimated noise=1198.64 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.356 x 11.66 at -22.93 degrees (North through East) ! Clean map min=-0.0058926 max=0.2291 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.545 mas, bmaj=11.86 mas, bpa=-24.35 degrees ! Estimated noise=1677.52 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.201341 Jy ! Component: 100 - total flux cleaned = 0.249495 Jy ! Component: 150 - total flux cleaned = 0.272585 Jy ! Component: 200 - total flux cleaned = 0.286155 Jy ! Total flux subtracted in 200 components = 0.286155 Jy ! Clean residual min=-0.007755 max=0.009021 Jy/beam ! Clean residual mean=-0.000066 rms=0.002242 Jy/beam ! Combined flux in latest and established models = 0.286155 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.286155 Jy ! Inverting map and beam ! Estimated beam: bmin=4.356 mas, bmaj=11.66 mas, bpa=-22.93 degrees ! Estimated noise=1198.64 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (36.5, -4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0118993 Jy ! Component: 100 - total flux cleaned = 0.0187179 Jy ! Component: 150 - total flux cleaned = 0.0233812 Jy ! Component: 200 - total flux cleaned = 0.0261243 Jy ! Total flux subtracted in 200 components = 0.0261243 Jy ! Clean residual min=-0.005238 max=0.004882 Jy/beam ! Clean residual mean=-0.000015 rms=0.001328 Jy/beam ! Combined flux in latest and established models = 0.312279 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 50 components and 0.312279 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.343 mas, bmaj=13.16 mas, bpa=0.8114 degrees ! Estimated noise=1398.58 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00268924 Jy ! Component: 100 - total flux cleaned = 0.00319538 Jy ! Component: 150 - total flux cleaned = 0.00355739 Jy ! Component: 200 - total flux cleaned = 0.00380947 Jy ! Total flux subtracted in 200 components = 0.00380947 Jy ! Clean residual min=-0.005532 max=0.005388 Jy/beam ! Clean residual mean=0.000007 rms=0.001614 Jy/beam ! Combined flux in latest and established models = 0.316089 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000158213 Jy ! Component: 100 - total flux cleaned = 0.00038127 Jy ! Component: 150 - total flux cleaned = 0.000592844 Jy ! Component: 200 - total flux cleaned = 0.000789127 Jy ! Total flux subtracted in 200 components = 0.000789127 Jy ! Clean residual min=-0.005074 max=0.005188 Jy/beam ! Clean residual mean=0.000013 rms=0.001543 Jy/beam ! Combined flux in latest and established models = 0.316878 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 79 components and 0.316878 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.356 mas, bmaj=11.66 mas, bpa=-22.93 degrees ! Estimated noise=1198.64 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000756214 Jy ! Component: 100 - total flux cleaned = 0.00101797 Jy ! Component: 150 - total flux cleaned = 0.00113785 Jy ! Component: 200 - total flux cleaned = 0.00125069 Jy ! Total flux subtracted in 200 components = 0.00125069 Jy ! Clean residual min=-0.004279 max=0.003896 Jy/beam ! Clean residual mean=0.000014 rms=0.001149 Jy/beam ! Combined flux in latest and established models = 0.318129 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 103 components and 0.318129 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.145975Jy sigma=0.000779 ! Fit after self-cal, rms=0.145901Jy sigma=0.000778 wmodel J1133+0015_S_2015_01_22_pus_map.mod ! Writing 103 model components to file: J1133+0015_S_2015_01_22_pus_map.mod wobs J1133+0015_S_2015_01_22_pus_uvs.fits ! Writing UV FITS file: J1133+0015_S_2015_01_22_pus_uvs.fits wwins J1133+0015_S_2015_01_22_pus_map.win ! wwins: Wrote 2 windows to J1133+0015_S_2015_01_22_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000828184 Jy ! Component: 100 - total flux cleaned = -0.00113991 Jy ! Component: 150 - total flux cleaned = -0.00130767 Jy ! Component: 200 - total flux cleaned = -0.00115119 Jy ! Component: 250 - total flux cleaned = -0.00095578 Jy ! Component: 300 - total flux cleaned = -0.00072436 Jy ! Component: 350 - total flux cleaned = -0.000634924 Jy ! Component: 400 - total flux cleaned = -0.000505937 Jy ! Component: 450 - total flux cleaned = -0.000506375 Jy ! Component: 500 - total flux cleaned = -0.000546412 Jy ! Component: 550 - total flux cleaned = -0.000659985 Jy ! Component: 600 - total flux cleaned = -0.000585578 Jy ! Component: 650 - total flux cleaned = -0.000586035 Jy ! Component: 700 - total flux cleaned = -0.000761836 Jy ! Component: 750 - total flux cleaned = -0.000795952 Jy ! Component: 800 - total flux cleaned = -0.000829749 Jy ! Component: 850 - total flux cleaned = -0.000863272 Jy ! Component: 900 - total flux cleaned = -0.000798697 Jy ! Component: 950 - total flux cleaned = -0.00073565 Jy ! Component: 1000 - total flux cleaned = -0.000612094 Jy ! Component: 1050 - total flux cleaned = -0.000581712 Jy ! Component: 1100 - total flux cleaned = -0.000461887 Jy ! Component: 1150 - total flux cleaned = -0.000343823 Jy ! Component: 1200 - total flux cleaned = -0.000284912 Jy ! Component: 1250 - total flux cleaned = -2.62335e-05 Jy ! Component: 1300 - total flux cleaned = 3.02339e-05 Jy ! Component: 1350 - total flux cleaned = 0.000198445 Jy ! Component: 1400 - total flux cleaned = 0.000364395 Jy ! Component: 1450 - total flux cleaned = 0.000446224 Jy ! Component: 1500 - total flux cleaned = 0.000527547 Jy ! Component: 1550 - total flux cleaned = 0.000688106 Jy ! Component: 1600 - total flux cleaned = 0.000846741 Jy ! Component: 1650 - total flux cleaned = 0.00100355 Jy ! Component: 1700 - total flux cleaned = 0.00118447 Jy ! Component: 1750 - total flux cleaned = 0.00131248 Jy ! Component: 1800 - total flux cleaned = 0.00146465 Jy ! Component: 1850 - total flux cleaned = 0.00159033 Jy ! Component: 1900 - total flux cleaned = 0.00173943 Jy ! Component: 1950 - total flux cleaned = 0.00186251 Jy ! Component: 2000 - total flux cleaned = 0.00198439 Jy ! Component: 2050 - total flux cleaned = 0.00210562 Jy ! Component: 2100 - total flux cleaned = 0.00224947 Jy ! Component: 2150 - total flux cleaned = 0.00239191 Jy ! Component: 2200 - total flux cleaned = 0.00258035 Jy ! Component: 2250 - total flux cleaned = 0.00267349 Jy ! Component: 2300 - total flux cleaned = 0.00278921 Jy ! Component: 2350 - total flux cleaned = 0.00292698 Jy ! Component: 2400 - total flux cleaned = 0.00304121 Jy ! Component: 2450 - total flux cleaned = 0.00317695 Jy ! Component: 2500 - total flux cleaned = 0.00328928 Jy ! Component: 2550 - total flux cleaned = 0.00340086 Jy ! Component: 2600 - total flux cleaned = 0.00353358 Jy ! Component: 2650 - total flux cleaned = 0.00366525 Jy ! Component: 2700 - total flux cleaned = 0.00377423 Jy ! Component: 2750 - total flux cleaned = 0.00388249 Jy ! Component: 2800 - total flux cleaned = 0.00401149 Jy ! Component: 2850 - total flux cleaned = 0.00411833 Jy ! Component: 2900 - total flux cleaned = 0.00426688 Jy ! Component: 2950 - total flux cleaned = 0.00439334 Jy ! Component: 3000 - total flux cleaned = 0.00447721 Jy ! Component: 3050 - total flux cleaned = 0.00460236 Jy ! Component: 3100 - total flux cleaned = 0.00470596 Jy ! Component: 3150 - total flux cleaned = 0.00485035 Jy ! Component: 3200 - total flux cleaned = 0.00499404 Jy ! Component: 3250 - total flux cleaned = 0.00505519 Jy ! Component: 3300 - total flux cleaned = 0.00521791 Jy ! Component: 3350 - total flux cleaned = 0.00531931 Jy ! Component: 3400 - total flux cleaned = 0.00546086 Jy ! Component: 3450 - total flux cleaned = 0.00554169 Jy ! Component: 3500 - total flux cleaned = 0.00564256 Jy ! Component: 3550 - total flux cleaned = 0.0057635 Jy ! Component: 3600 - total flux cleaned = 0.00584409 Jy ! Component: 3650 - total flux cleaned = 0.00598492 Jy ! Component: 3700 - total flux cleaned = 0.0060855 Jy ! Component: 3750 - total flux cleaned = 0.00616614 Jy ! Component: 3800 - total flux cleaned = 0.00622659 Jy ! Component: 3850 - total flux cleaned = 0.00636762 Jy ! Component: 3900 - total flux cleaned = 0.00644836 Jy ! Component: 3950 - total flux cleaned = 0.00656947 Jy ! Component: 4000 - total flux cleaned = 0.00665034 Jy ! Component: 4050 - total flux cleaned = 0.00677166 Jy ! Total flux subtracted in 4096 components = 0.0068529 Jy ! Clean residual min=-0.001040 max=0.001206 Jy/beam ! Clean residual mean=-0.000000 rms=0.000382 Jy/beam ! Combined flux in latest and established models = 0.324981 Jy keep ! Adding 311 model components to the UV plane model. ! The established model now contains 414 components and 0.324981 Jy ![Exited script file: muppet] wmap "J1133+0015_S_2015_01_22_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.356 x 11.66 at -22.93 degrees (North through East) ! Clean map min=-0.0037999 max=0.23685 Jy/beam ! Writing clean map to FITS file: J1133+0015_S_2015_01_22_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.236846 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000378729 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.479716 0.479716 0.959432 1.91886 3.83773 7.67546 15.3509 30.7018 61.4037 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.236 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.356 x 11.66 at -22.93 degrees (North through East) ! Clean map min=-0.0037999 max=0.23685 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1133+0015_S_2015_01_22_pus_uvs.log closed on Tue Jan 3 22:51:40 2017