! Started logfile: J1130+3815_S_2015_01_23_pus_uvs.log on Mon Jan 2 19:23:11 2017 obs J1130+3815_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J1130+3815_S_2015_01_23_pus_uva.fits ! AN table 1: 15 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.86963 visibilities/baseline/integration-bin. ! Found source: J1130+3815 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 2348 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1130+3815_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.687366Jy sigma=0.003734 ! Fit after self-cal, rms=0.663095Jy sigma=0.003154 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.748 mas, bmaj=9.052 mas, bpa=-35.21 degrees ! Estimated noise=1901.97 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.861563 Jy ! Component: 100 - total flux cleaned = 1.06027 Jy ! Total flux subtracted in 100 components = 1.06027 Jy ! Clean residual min=-0.071152 max=0.086091 Jy/beam ! Clean residual mean=0.000305 rms=0.018936 Jy/beam ! Combined flux in latest and established models = 1.06027 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 1.06027 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.643207Jy sigma=0.002896 ! Fit after self-cal, rms=0.643238Jy sigma=0.002896 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.198 mas, bmaj=9.267 mas, bpa=-34.71 degrees ! Estimated noise=1426.34 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.116611 Jy ! Component: 100 - total flux cleaned = 0.18663 Jy ! Component: 150 - total flux cleaned = 0.2353 Jy ! Component: 200 - total flux cleaned = 0.272502 Jy ! Total flux subtracted in 200 components = 0.272502 Jy ! Clean residual min=-0.053395 max=0.061930 Jy/beam ! Clean residual mean=0.000213 rms=0.014357 Jy/beam ! Combined flux in latest and established models = 1.33277 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 48 components and 1.33277 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.590515Jy sigma=0.002250 ! Fit after self-cal, rms=0.590632Jy sigma=0.002249 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.51 HN 0.97 KP 1.10 ! LA 0.96 MK 1.03 NL 1.05 OV 0.98 ! PT 1.01 SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.58 HN 1.04 KP 1.02 ! LA 0.92 MK 1.03 NL 1.25 OV 1.00 ! PT 1.01 SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 0.70 HN 1.06 KP 0.88 ! LA 0.75 MK 1.05 NL 1.52 OV 0.93 ! PT 1.00 SC 1.03 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.69 HN 1.06 KP 0.82 ! LA 0.80 MK 1.02 NL 0.88 OV 0.93 ! PT 1.03 SC 1.01 ! ! ! Fit before self-cal, rms=0.590632Jy sigma=0.002249 ! Fit after self-cal, rms=0.272956Jy sigma=0.001005 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.261 mas, bmaj=9.312 mas, bpa=-34.42 degrees ! Estimated noise=1416.22 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0239549 Jy ! Component: 100 - total flux cleaned = -0.0266397 Jy ! Component: 150 - total flux cleaned = -0.0274177 Jy ! Component: 200 - total flux cleaned = -0.0280552 Jy ! Total flux subtracted in 200 components = -0.0280552 Jy ! Clean residual min=-0.018773 max=0.015120 Jy/beam ! Clean residual mean=0.000012 rms=0.004126 Jy/beam ! Combined flux in latest and established models = 1.30472 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 64 components and 1.30472 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.270325Jy sigma=0.000940 ! Fit after self-cal, rms=0.270269Jy sigma=0.000939 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.270269Jy sigma=0.000939 ! Fit after self-cal, rms=0.267193Jy sigma=0.000911 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.267 mas, bmaj=9.309 mas, bpa=-34.37 degrees ! Estimated noise=1413.96 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0158387 Jy ! Component: 100 - total flux cleaned = -0.0206044 Jy ! Component: 150 - total flux cleaned = -0.022175 Jy ! Component: 200 - total flux cleaned = -0.0228367 Jy ! Total flux subtracted in 200 components = -0.0228367 Jy ! Clean residual min=-0.013919 max=0.010861 Jy/beam ! Clean residual mean=0.000007 rms=0.003114 Jy/beam ! Combined flux in latest and established models = 1.28188 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 72 components and 1.28188 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.266002Jy sigma=0.000879 ! Fit after self-cal, rms=0.266008Jy sigma=0.000879 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000571552 Jy ! Component: 100 - total flux cleaned = -0.00108101 Jy ! Component: 150 - total flux cleaned = -0.00166528 Jy ! Component: 200 - total flux cleaned = -0.00179341 Jy ! Total flux subtracted in 200 components = -0.00179341 Jy ! Clean residual min=-0.013121 max=0.011181 Jy/beam ! Clean residual mean=0.000009 rms=0.003054 Jy/beam ! Combined flux in latest and established models = 1.28009 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 76 components and 1.28009 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.265825Jy sigma=0.000874 ! Fit after self-cal, rms=0.265833Jy sigma=0.000874 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.265833Jy sigma=0.000874 ! Fit after self-cal, rms=0.263829Jy sigma=0.000855 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.275 mas, bmaj=9.312 mas, bpa=-34.31 degrees ! Estimated noise=1413.51 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0105011 Jy ! Component: 100 - total flux cleaned = -0.0150675 Jy ! Component: 150 - total flux cleaned = -0.0167676 Jy ! Component: 200 - total flux cleaned = -0.0171922 Jy ! Total flux subtracted in 200 components = -0.0171922 Jy ! Clean residual min=-0.010011 max=0.007996 Jy/beam ! Clean residual mean=0.000003 rms=0.002328 Jy/beam ! Combined flux in latest and established models = 1.2629 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 82 components and 1.2629 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.263283Jy sigma=0.000841 ! Fit after self-cal, rms=0.263291Jy sigma=0.000841 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000355599 Jy ! Component: 100 - total flux cleaned = -0.000575723 Jy ! Component: 150 - total flux cleaned = -0.000766837 Jy ! Component: 200 - total flux cleaned = -0.000766414 Jy ! Total flux subtracted in 200 components = -0.000766414 Jy ! Clean residual min=-0.009485 max=0.008273 Jy/beam ! Clean residual mean=0.000004 rms=0.002294 Jy/beam ! Combined flux in latest and established models = 1.26213 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 86 components and 1.26213 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.263215Jy sigma=0.000839 ! Fit after self-cal, rms=0.263216Jy sigma=0.000839 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.263216Jy sigma=0.000839 ! Fit after self-cal, rms=0.262257Jy sigma=0.000830 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.602 mas, bmaj=10.04 mas, bpa=-31.59 degrees ! Estimated noise=1735.6 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00627594 Jy ! Component: 100 - total flux cleaned = -0.00885401 Jy ! Component: 150 - total flux cleaned = -0.0091978 Jy ! Component: 200 - total flux cleaned = -0.00936621 Jy ! Total flux subtracted in 200 components = -0.00936621 Jy ! Clean residual min=-0.010044 max=0.007048 Jy/beam ! Clean residual mean=-0.000008 rms=0.002467 Jy/beam ! Combined flux in latest and established models = 1.25276 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 97 components and 1.25276 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.262134Jy sigma=0.000827 ! Fit after self-cal, rms=0.262142Jy sigma=0.000827 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000210313 Jy ! Component: 100 - total flux cleaned = -0.000210082 Jy ! Component: 150 - total flux cleaned = -0.00020966 Jy ! Component: 200 - total flux cleaned = -0.000210777 Jy ! Total flux subtracted in 200 components = -0.000210777 Jy ! Clean residual min=-0.010088 max=0.006955 Jy/beam ! Clean residual mean=-0.000007 rms=0.002460 Jy/beam ! Combined flux in latest and established models = 1.25255 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 103 components and 1.25255 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.262149Jy sigma=0.000828 ! Fit after self-cal, rms=0.262158Jy sigma=0.000828 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.279 mas, bmaj=9.317 mas, bpa=-34.27 degrees ! Estimated noise=1412.99 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.279 x 9.317 at -34.27 degrees (North through East) ! Clean map min=-0.0087972 max=1.1088 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.262158Jy sigma=0.000828 ! Fit after self-cal, rms=0.249668Jy sigma=0.000748 ! Inverting map and beam ! Estimated beam: bmin=3.278 mas, bmaj=9.327 mas, bpa=-34.27 degrees ! Estimated noise=1411.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00636183 Jy ! Component: 100 - total flux cleaned = -0.00996526 Jy ! Component: 150 - total flux cleaned = -0.0108909 Jy ! Component: 200 - total flux cleaned = -0.011082 Jy ! Total flux subtracted in 200 components = -0.011082 Jy ! Clean residual min=-0.007614 max=0.005782 Jy/beam ! Clean residual mean=0.000001 rms=0.001696 Jy/beam ! Combined flux in latest and established models = 1.24147 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 106 components and 1.24147 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.249314Jy sigma=0.000742 ! Fit after self-cal, rms=0.249300Jy sigma=0.000742 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000180597 Jy ! Component: 100 - total flux cleaned = -0.000182381 Jy ! Component: 150 - total flux cleaned = -0.000185228 Jy ! Component: 200 - total flux cleaned = -0.000184603 Jy ! Total flux subtracted in 200 components = -0.000184603 Jy ! Clean residual min=-0.007198 max=0.005942 Jy/beam ! Clean residual mean=0.000001 rms=0.001672 Jy/beam ! Combined flux in latest and established models = 1.24129 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 113 components and 1.24129 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.249234Jy sigma=0.000740 ! Fit after self-cal, rms=0.249233Jy sigma=0.000740 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.249233Jy sigma=0.000740 ! Fit after self-cal, rms=0.249022Jy sigma=0.000737 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.804 mas, bmaj=9.073 mas, bpa=-34.79 degrees ! Estimated noise=1902.18 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.86156 Jy ! Component: 100 - total flux cleaned = 1.05119 Jy ! Component: 150 - total flux cleaned = 1.11256 Jy ! Component: 200 - total flux cleaned = 1.14232 Jy ! Total flux subtracted in 200 components = 1.14232 Jy ! Clean residual min=-0.014340 max=0.016476 Jy/beam ! Clean residual mean=0.000080 rms=0.003993 Jy/beam ! Combined flux in latest and established models = 1.14232 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 1.14232 Jy ! Inverting map and beam ! Estimated beam: bmin=3.28 mas, bmaj=9.332 mas, bpa=-34.24 degrees ! Estimated noise=1410.56 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0234483 Jy ! Component: 100 - total flux cleaned = 0.0392201 Jy ! Component: 150 - total flux cleaned = 0.0506038 Jy ! Component: 200 - total flux cleaned = 0.0591787 Jy ! Total flux subtracted in 200 components = 0.0591787 Jy ! Clean residual min=-0.008096 max=0.008709 Jy/beam ! Clean residual mean=0.000045 rms=0.002283 Jy/beam ! Combined flux in latest and established models = 1.2015 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 61 components and 1.2015 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.626 mas, bmaj=10.05 mas, bpa=-31.31 degrees ! Estimated noise=1729.9 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0118114 Jy ! Component: 100 - total flux cleaned = 0.0194338 Jy ! Component: 150 - total flux cleaned = 0.0244387 Jy ! Component: 200 - total flux cleaned = 0.0277388 Jy ! Total flux subtracted in 200 components = 0.0277388 Jy ! Clean residual min=-0.008167 max=0.006714 Jy/beam ! Clean residual mean=0.000011 rms=0.002035 Jy/beam ! Combined flux in latest and established models = 1.22924 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0018143 Jy ! Component: 100 - total flux cleaned = 0.00245736 Jy ! Component: 150 - total flux cleaned = 0.00271906 Jy ! Component: 200 - total flux cleaned = 0.00307974 Jy ! Total flux subtracted in 200 components = 0.00307974 Jy ! Clean residual min=-0.007871 max=0.006334 Jy/beam ! Clean residual mean=0.000002 rms=0.001943 Jy/beam ! Combined flux in latest and established models = 1.23232 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 76 components and 1.23232 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.28 mas, bmaj=9.332 mas, bpa=-34.24 degrees ! Estimated noise=1410.56 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00258071 Jy ! Component: 100 - total flux cleaned = -0.00268398 Jy ! Component: 150 - total flux cleaned = -0.00240542 Jy ! Component: 200 - total flux cleaned = -0.00214576 Jy ! Total flux subtracted in 200 components = -0.00214576 Jy ! Clean residual min=-0.005970 max=0.005289 Jy/beam ! Clean residual mean=0.000005 rms=0.001514 Jy/beam ! Combined flux in latest and established models = 1.23017 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 89 components and 1.23017 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.248891Jy sigma=0.000736 ! Fit after self-cal, rms=0.248864Jy sigma=0.000736 wmodel J1130+3815_S_2015_01_23_pus_map.mod ! Writing 89 model components to file: J1130+3815_S_2015_01_23_pus_map.mod wobs J1130+3815_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J1130+3815_S_2015_01_23_pus_uvs.fits wwins J1130+3815_S_2015_01_23_pus_map.win ! wwins: Wrote 1 windows to J1130+3815_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0023203 Jy ! Component: 100 - total flux cleaned = -0.00262421 Jy ! Component: 150 - total flux cleaned = -0.00262431 Jy ! Component: 200 - total flux cleaned = -0.00288084 Jy ! Component: 250 - total flux cleaned = -0.00304401 Jy ! Component: 300 - total flux cleaned = -0.00351912 Jy ! Component: 350 - total flux cleaned = -0.00351954 Jy ! Component: 400 - total flux cleaned = -0.00351992 Jy ! Component: 450 - total flux cleaned = -0.00352055 Jy ! Component: 500 - total flux cleaned = -0.00373106 Jy ! Component: 550 - total flux cleaned = -0.00366188 Jy ! Component: 600 - total flux cleaned = -0.00386348 Jy ! Component: 650 - total flux cleaned = -0.00392866 Jy ! Component: 700 - total flux cleaned = -0.00399272 Jy ! Component: 750 - total flux cleaned = -0.00411909 Jy ! Component: 800 - total flux cleaned = -0.00430602 Jy ! Component: 850 - total flux cleaned = -0.00448838 Jy ! Component: 900 - total flux cleaned = -0.00466661 Jy ! Component: 950 - total flux cleaned = -0.00478265 Jy ! Component: 1000 - total flux cleaned = -0.00478223 Jy ! Component: 1050 - total flux cleaned = -0.00472577 Jy ! Component: 1100 - total flux cleaned = -0.00456005 Jy ! Component: 1150 - total flux cleaned = -0.00450499 Jy ! Component: 1200 - total flux cleaned = -0.0043447 Jy ! Component: 1250 - total flux cleaned = -0.00418693 Jy ! Component: 1300 - total flux cleaned = -0.00423784 Jy ! Component: 1350 - total flux cleaned = -0.0040844 Jy ! Component: 1400 - total flux cleaned = -0.00383389 Jy ! Component: 1450 - total flux cleaned = -0.00373604 Jy ! Component: 1500 - total flux cleaned = -0.00368855 Jy ! Component: 1550 - total flux cleaned = -0.00368815 Jy ! Component: 1600 - total flux cleaned = -0.003405 Jy ! Component: 1650 - total flux cleaned = -0.00312599 Jy ! Component: 1700 - total flux cleaned = -0.00275939 Jy ! Component: 1750 - total flux cleaned = -0.00244284 Jy ! Component: 1800 - total flux cleaned = -0.00226382 Jy ! Component: 1850 - total flux cleaned = -0.00195439 Jy ! Component: 1900 - total flux cleaned = -0.0016924 Jy ! Component: 1950 - total flux cleaned = -0.00147667 Jy ! Component: 2000 - total flux cleaned = -0.00122052 Jy ! Component: 2050 - total flux cleaned = -0.000967487 Jy ! Component: 2100 - total flux cleaned = -0.000758498 Jy ! Component: 2150 - total flux cleaned = -0.000428974 Jy ! Component: 2200 - total flux cleaned = -0.000183704 Jy ! Component: 2250 - total flux cleaned = 5.87191e-05 Jy ! Component: 2300 - total flux cleaned = 0.000378642 Jy ! Component: 2350 - total flux cleaned = 0.00065522 Jy ! Component: 2400 - total flux cleaned = 0.000850737 Jy ! Component: 2450 - total flux cleaned = 0.00112223 Jy ! Component: 2500 - total flux cleaned = 0.00139126 Jy ! Component: 2550 - total flux cleaned = 0.00158225 Jy ! Component: 2600 - total flux cleaned = 0.00192244 Jy ! Component: 2650 - total flux cleaned = 0.00214736 Jy ! Component: 2700 - total flux cleaned = 0.00244433 Jy ! Component: 2750 - total flux cleaned = 0.00262849 Jy ! Component: 2800 - total flux cleaned = 0.00284777 Jy ! Component: 2850 - total flux cleaned = 0.00295653 Jy ! Component: 2900 - total flux cleaned = 0.00313666 Jy ! Component: 2950 - total flux cleaned = 0.00335127 Jy ! Component: 3000 - total flux cleaned = 0.00345793 Jy ! Component: 3050 - total flux cleaned = 0.00374033 Jy ! Component: 3100 - total flux cleaned = 0.00384565 Jy ! Component: 3150 - total flux cleaned = 0.00401984 Jy ! Component: 3200 - total flux cleaned = 0.00426242 Jy ! Component: 3250 - total flux cleaned = 0.00439994 Jy ! Component: 3300 - total flux cleaned = 0.00460526 Jy ! Component: 3350 - total flux cleaned = 0.00480936 Jy ! Component: 3400 - total flux cleaned = 0.00491108 Jy ! Component: 3450 - total flux cleaned = 0.00504647 Jy ! Component: 3500 - total flux cleaned = 0.00511386 Jy ! Component: 3550 - total flux cleaned = 0.00521488 Jy ! Component: 3600 - total flux cleaned = 0.0053157 Jy ! Component: 3650 - total flux cleaned = 0.00528186 Jy ! Component: 3700 - total flux cleaned = 0.0053489 Jy ! Component: 3750 - total flux cleaned = 0.00541574 Jy ! Component: 3800 - total flux cleaned = 0.0054157 Jy ! Component: 3850 - total flux cleaned = 0.00554933 Jy ! Component: 3900 - total flux cleaned = 0.00561595 Jy ! Component: 3950 - total flux cleaned = 0.00561597 Jy ! Component: 4000 - total flux cleaned = 0.00564941 Jy ! Component: 4050 - total flux cleaned = 0.00561616 Jy ! Total flux subtracted in 4096 components = 0.00571598 Jy ! Clean residual min=-0.001825 max=0.001924 Jy/beam ! Clean residual mean=-0.000000 rms=0.000574 Jy/beam ! Combined flux in latest and established models = 1.23589 Jy keep ! Adding 233 model components to the UV plane model. ! The established model now contains 322 components and 1.23589 Jy ![Exited script file: muppet] wmap "J1130+3815_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.28 x 9.332 at -34.24 degrees (North through East) ! Clean map min=-0.0063362 max=1.1106 Jy/beam ! Writing clean map to FITS file: J1130+3815_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.11061 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000550005 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.148568 0.148568 0.297136 0.594273 1.18855 2.37709 4.75418 9.50836 19.0167 38.0334 76.0669 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0016 print "peak=",int(1000*peak_flux)/1000 ! peak= 1.11 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.28 x 9.332 at -34.24 degrees (North through East) ! Clean map min=-0.0063362 max=1.1106 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1130+3815_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 19:23:16 2017