! Started logfile: J1130+0846_S_2015_01_22_pus_uvs.log on Tue Jan 3 22:51:28 2017 obs J1130+0846_S_2015_01_22_pus_uva.fits ! Reading UV FITS file: J1130+0846_S_2015_01_22_pus_uva.fits ! AN table 1: 30 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.622222 visibilities/baseline/integration-bin. ! Found source: J1130+0846 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 281 lines of history. ! ! Reading 3360 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1130+0846_S_2015_01_22_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 60 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 60 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 60 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 60 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.820103Jy sigma=0.009662 ! Fit after self-cal, rms=0.810604Jy sigma=0.009550 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.339 mas, bmaj=11 mas, bpa=-31.53 degrees ! Estimated noise=1249.93 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.147588 Jy ! Component: 100 - total flux cleaned = 0.18217 Jy ! Total flux subtracted in 100 components = 0.18217 Jy ! Clean residual min=-0.011083 max=0.015239 Jy/beam ! Clean residual mean=-0.000143 rms=0.003413 Jy/beam ! Combined flux in latest and established models = 0.18217 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.18217 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086014Jy sigma=0.000887 ! Fit after self-cal, rms=0.086014Jy sigma=0.000887 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.98 mas, bmaj=11.36 mas, bpa=-30.91 degrees ! Estimated noise=1076.56 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0169543 Jy ! Component: 100 - total flux cleaned = 0.0258689 Jy ! Component: 150 - total flux cleaned = 0.0306853 Jy ! Component: 200 - total flux cleaned = 0.0325605 Jy ! Total flux subtracted in 200 components = 0.0325605 Jy ! Clean residual min=-0.008855 max=0.009590 Jy/beam ! Clean residual mean=-0.000044 rms=0.002420 Jy/beam ! Combined flux in latest and established models = 0.214731 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 28 components and 0.214731 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082542Jy sigma=0.000847 ! Fit after self-cal, rms=0.082529Jy sigma=0.000847 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00* HN 0.99 KP 1.05 ! LA 1.09 MK 1.01 NL 0.90 OV 0.94 ! PT 1.02 SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00* HN 1.01 KP 1.00 ! LA 1.01 MK 1.01 NL 1.13 OV 0.95 ! PT 1.01 SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.00* HN 1.01 KP 0.84 ! LA 0.89 MK 1.03 NL 1.64 OV 0.87 ! PT 1.00 SC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.00* HN 0.99 KP 0.81 ! LA 0.94 MK 1.00 NL 0.92 OV 1.00 ! PT 1.04 SC 1.00* ! ! ! Fit before self-cal, rms=0.082529Jy sigma=0.000847 ! Fit after self-cal, rms=0.075870Jy sigma=0.000771 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.022 mas, bmaj=11.28 mas, bpa=-30.77 degrees ! Estimated noise=1075.18 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00344607 Jy ! Component: 100 - total flux cleaned = -0.00423507 Jy ! Component: 150 - total flux cleaned = -0.00434396 Jy ! Component: 200 - total flux cleaned = -0.00442574 Jy ! Total flux subtracted in 200 components = -0.00442574 Jy ! Clean residual min=-0.004164 max=0.004222 Jy/beam ! Clean residual mean=-0.000056 rms=0.001144 Jy/beam ! Combined flux in latest and established models = 0.210305 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 43 components and 0.210305 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075704Jy sigma=0.000769 ! Fit after self-cal, rms=0.075694Jy sigma=0.000768 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075694Jy sigma=0.000768 ! Fit after self-cal, rms=0.076001Jy sigma=0.000768 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.032 mas, bmaj=11.25 mas, bpa=-30.72 degrees ! Estimated noise=1074.1 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00237168 Jy ! Component: 100 - total flux cleaned = -0.00275739 Jy ! Component: 150 - total flux cleaned = -0.00279561 Jy ! Component: 200 - total flux cleaned = -0.00282667 Jy ! Total flux subtracted in 200 components = -0.00282667 Jy ! Clean residual min=-0.003683 max=0.003721 Jy/beam ! Clean residual mean=-0.000052 rms=0.001014 Jy/beam ! Combined flux in latest and established models = 0.207478 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 47 components and 0.207478 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075919Jy sigma=0.000767 ! Fit after self-cal, rms=0.075929Jy sigma=0.000767 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000160494 Jy ! Component: 100 - total flux cleaned = -0.00018454 Jy ! Component: 150 - total flux cleaned = -0.000229504 Jy ! Component: 200 - total flux cleaned = -0.000288469 Jy ! Total flux subtracted in 200 components = -0.000288469 Jy ! Clean residual min=-0.003633 max=0.003559 Jy/beam ! Clean residual mean=-0.000053 rms=0.001007 Jy/beam ! Combined flux in latest and established models = 0.20719 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 55 components and 0.20719 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075915Jy sigma=0.000766 ! Fit after self-cal, rms=0.075913Jy sigma=0.000766 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075913Jy sigma=0.000766 ! Fit after self-cal, rms=0.076300Jy sigma=0.000766 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.041 mas, bmaj=11.23 mas, bpa=-30.67 degrees ! Estimated noise=1074.35 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0016421 Jy ! Component: 100 - total flux cleaned = -0.0018239 Jy ! Component: 150 - total flux cleaned = -0.00184726 Jy ! Component: 200 - total flux cleaned = -0.00186612 Jy ! Total flux subtracted in 200 components = -0.00186612 Jy ! Clean residual min=-0.003264 max=0.003235 Jy/beam ! Clean residual mean=-0.000048 rms=0.000920 Jy/beam ! Combined flux in latest and established models = 0.205324 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 62 components and 0.205324 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076262Jy sigma=0.000766 ! Fit after self-cal, rms=0.076272Jy sigma=0.000766 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.76811e-05 Jy ! Component: 100 - total flux cleaned = -9.1408e-05 Jy ! Component: 150 - total flux cleaned = -0.000150753 Jy ! Component: 200 - total flux cleaned = -0.000177016 Jy ! Total flux subtracted in 200 components = -0.000177016 Jy ! Clean residual min=-0.003281 max=0.003144 Jy/beam ! Clean residual mean=-0.000049 rms=0.000918 Jy/beam ! Combined flux in latest and established models = 0.205147 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 72 components and 0.205147 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076265Jy sigma=0.000765 ! Fit after self-cal, rms=0.076264Jy sigma=0.000765 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076264Jy sigma=0.000765 ! Fit after self-cal, rms=0.076590Jy sigma=0.000765 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.175 mas, bmaj=11.54 mas, bpa=-20.14 degrees ! Estimated noise=1273.38 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000727676 Jy ! Component: 100 - total flux cleaned = -0.000858791 Jy ! Component: 150 - total flux cleaned = -0.000945635 Jy ! Component: 200 - total flux cleaned = -0.00102216 Jy ! Total flux subtracted in 200 components = -0.00102216 Jy ! Clean residual min=-0.003901 max=0.003539 Jy/beam ! Clean residual mean=-0.000077 rms=0.001097 Jy/beam ! Combined flux in latest and established models = 0.204125 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 83 components and 0.204125 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076575Jy sigma=0.000765 ! Fit after self-cal, rms=0.076582Jy sigma=0.000765 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.77739e-05 Jy ! Component: 100 - total flux cleaned = -8.09116e-05 Jy ! Component: 150 - total flux cleaned = -0.000118236 Jy ! Component: 200 - total flux cleaned = -0.000141233 Jy ! Total flux subtracted in 200 components = -0.000141233 Jy ! Clean residual min=-0.003909 max=0.003500 Jy/beam ! Clean residual mean=-0.000078 rms=0.001097 Jy/beam ! Combined flux in latest and established models = 0.203983 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 95 components and 0.203983 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076579Jy sigma=0.000765 ! Fit after self-cal, rms=0.076578Jy sigma=0.000765 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.049 mas, bmaj=11.2 mas, bpa=-30.64 degrees ! Estimated noise=1074.48 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.049 x 11.2 at -30.64 degrees (North through East) ! Clean map min=-0.0031437 max=0.18658 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.382 mas, bmaj=10.81 mas, bpa=-31.26 degrees ! Estimated noise=1237.7 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.146104 Jy ! Component: 100 - total flux cleaned = 0.17893 Jy ! Component: 150 - total flux cleaned = 0.191139 Jy ! Component: 200 - total flux cleaned = 0.197507 Jy ! Total flux subtracted in 200 components = 0.197507 Jy ! Clean residual min=-0.005310 max=0.003971 Jy/beam ! Clean residual mean=-0.000064 rms=0.001191 Jy/beam ! Combined flux in latest and established models = 0.197507 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.197507 Jy ! Inverting map and beam ! Estimated beam: bmin=4.049 mas, bmaj=11.2 mas, bpa=-30.64 degrees ! Estimated noise=1074.48 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00339396 Jy ! Component: 100 - total flux cleaned = 0.00450893 Jy ! Component: 150 - total flux cleaned = 0.00523345 Jy ! Component: 200 - total flux cleaned = 0.00558825 Jy ! Total flux subtracted in 200 components = 0.00558825 Jy ! Clean residual min=-0.003232 max=0.003144 Jy/beam ! Clean residual mean=-0.000051 rms=0.000910 Jy/beam ! Combined flux in latest and established models = 0.203095 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 33 components and 0.203095 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.175 mas, bmaj=11.54 mas, bpa=-20.14 degrees ! Estimated noise=1273.38 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000345429 Jy ! Component: 100 - total flux cleaned = 0.000609549 Jy ! Component: 150 - total flux cleaned = 0.000755911 Jy ! Component: 200 - total flux cleaned = 0.00085503 Jy ! Total flux subtracted in 200 components = 0.00085503 Jy ! Clean residual min=-0.003996 max=0.003469 Jy/beam ! Clean residual mean=-0.000079 rms=0.001112 Jy/beam ! Combined flux in latest and established models = 0.20395 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.78738e-05 Jy ! Component: 100 - total flux cleaned = 0.000112405 Jy ! Component: 150 - total flux cleaned = 0.000164503 Jy ! Component: 200 - total flux cleaned = 0.000199475 Jy ! Total flux subtracted in 200 components = 0.000199475 Jy ! Clean residual min=-0.003961 max=0.003544 Jy/beam ! Clean residual mean=-0.000077 rms=0.001108 Jy/beam ! Combined flux in latest and established models = 0.20415 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 64 components and 0.20415 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.049 mas, bmaj=11.2 mas, bpa=-30.64 degrees ! Estimated noise=1074.48 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.02589e-05 Jy ! Component: 100 - total flux cleaned = -0.000198979 Jy ! Component: 150 - total flux cleaned = -0.000222613 Jy ! Component: 200 - total flux cleaned = -0.000241856 Jy ! Total flux subtracted in 200 components = -0.000241856 Jy ! Clean residual min=-0.003104 max=0.002894 Jy/beam ! Clean residual mean=-0.000046 rms=0.000879 Jy/beam ! Combined flux in latest and established models = 0.203908 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 75 components and 0.203908 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076586Jy sigma=0.000765 ! Fit after self-cal, rms=0.076587Jy sigma=0.000765 wmodel J1130+0846_S_2015_01_22_pus_map.mod ! Writing 75 model components to file: J1130+0846_S_2015_01_22_pus_map.mod wobs J1130+0846_S_2015_01_22_pus_uvs.fits ! Writing UV FITS file: J1130+0846_S_2015_01_22_pus_uvs.fits wwins J1130+0846_S_2015_01_22_pus_map.win ! wwins: Wrote 1 windows to J1130+0846_S_2015_01_22_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00110438 Jy ! Component: 100 - total flux cleaned = -0.00184084 Jy ! Component: 150 - total flux cleaned = -0.00257024 Jy ! Component: 200 - total flux cleaned = -0.00302156 Jy ! Component: 250 - total flux cleaned = -0.00340317 Jy ! Component: 300 - total flux cleaned = -0.00384315 Jy ! Component: 350 - total flux cleaned = -0.00426055 Jy ! Component: 400 - total flux cleaned = -0.00462235 Jy ! Component: 450 - total flux cleaned = -0.00493179 Jy ! Component: 500 - total flux cleaned = -0.00519407 Jy ! Component: 550 - total flux cleaned = -0.00541522 Jy ! Component: 600 - total flux cleaned = -0.00550653 Jy ! Component: 650 - total flux cleaned = -0.00556445 Jy ! Component: 700 - total flux cleaned = -0.00550818 Jy ! Component: 750 - total flux cleaned = -0.00539922 Jy ! Component: 800 - total flux cleaned = -0.00542558 Jy ! Component: 850 - total flux cleaned = -0.00539995 Jy ! Component: 900 - total flux cleaned = -0.00542473 Jy ! Component: 950 - total flux cleaned = -0.00532773 Jy ! Component: 1000 - total flux cleaned = -0.00525771 Jy ! Component: 1050 - total flux cleaned = -0.00516631 Jy ! Component: 1100 - total flux cleaned = -0.00514437 Jy ! Component: 1150 - total flux cleaned = -0.00512247 Jy ! Component: 1200 - total flux cleaned = -0.00514333 Jy ! Component: 1250 - total flux cleaned = -0.00518469 Jy ! Component: 1300 - total flux cleaned = -0.00524513 Jy ! Component: 1350 - total flux cleaned = -0.00524463 Jy ! Component: 1400 - total flux cleaned = -0.00524487 Jy ! Component: 1450 - total flux cleaned = -0.00526408 Jy ! Component: 1500 - total flux cleaned = -0.0053213 Jy ! Component: 1550 - total flux cleaned = -0.00532143 Jy ! Component: 1600 - total flux cleaned = -0.00535853 Jy ! Component: 1650 - total flux cleaned = -0.00543083 Jy ! Component: 1700 - total flux cleaned = -0.005413 Jy ! Component: 1750 - total flux cleaned = -0.00543082 Jy ! Component: 1800 - total flux cleaned = -0.00550016 Jy ! Component: 1850 - total flux cleaned = -0.00546614 Jy ! Component: 1900 - total flux cleaned = -0.00548315 Jy ! Component: 1950 - total flux cleaned = -0.00548296 Jy ! Component: 2000 - total flux cleaned = -0.00546632 Jy ! Component: 2050 - total flux cleaned = -0.00546628 Jy ! Component: 2100 - total flux cleaned = -0.00544995 Jy ! Component: 2150 - total flux cleaned = -0.00538509 Jy ! Component: 2200 - total flux cleaned = -0.005353 Jy ! Component: 2250 - total flux cleaned = -0.00533712 Jy ! Component: 2300 - total flux cleaned = -0.00528953 Jy ! Component: 2350 - total flux cleaned = -0.00528954 Jy ! Component: 2400 - total flux cleaned = -0.00530508 Jy ! Component: 2450 - total flux cleaned = -0.00527393 Jy ! Component: 2500 - total flux cleaned = -0.00525847 Jy ! Component: 2550 - total flux cleaned = -0.00524305 Jy ! Component: 2600 - total flux cleaned = -0.00522765 Jy ! Component: 2650 - total flux cleaned = -0.00521241 Jy ! Component: 2700 - total flux cleaned = -0.00519724 Jy ! Component: 2750 - total flux cleaned = -0.00521241 Jy ! Component: 2800 - total flux cleaned = -0.00518222 Jy ! Component: 2850 - total flux cleaned = -0.00516722 Jy ! Component: 2900 - total flux cleaned = -0.00515238 Jy ! Component: 2950 - total flux cleaned = -0.00513758 Jy ! Component: 3000 - total flux cleaned = -0.00513765 Jy ! Component: 3050 - total flux cleaned = -0.00513771 Jy ! Component: 3100 - total flux cleaned = -0.0051083 Jy ! Component: 3150 - total flux cleaned = -0.00506418 Jy ! Component: 3200 - total flux cleaned = -0.0050496 Jy ! Component: 3250 - total flux cleaned = -0.00503494 Jy ! Component: 3300 - total flux cleaned = -0.00502036 Jy ! Component: 3350 - total flux cleaned = -0.00500584 Jy ! Component: 3400 - total flux cleaned = -0.00500593 Jy ! Component: 3450 - total flux cleaned = -0.00496269 Jy ! Component: 3500 - total flux cleaned = -0.00496269 Jy ! Component: 3550 - total flux cleaned = -0.00491959 Jy ! Component: 3600 - total flux cleaned = -0.00487658 Jy ! Component: 3650 - total flux cleaned = -0.00489099 Jy ! Component: 3700 - total flux cleaned = -0.00489097 Jy ! Component: 3750 - total flux cleaned = -0.00481972 Jy ! Component: 3800 - total flux cleaned = -0.00480556 Jy ! Component: 3850 - total flux cleaned = -0.00480556 Jy ! Component: 3900 - total flux cleaned = -0.00477708 Jy ! Component: 3950 - total flux cleaned = -0.00479127 Jy ! Component: 4000 - total flux cleaned = -0.00481968 Jy ! Component: 4050 - total flux cleaned = -0.00484809 Jy ! Total flux subtracted in 4096 components = -0.0048481 Jy ! Clean residual min=-0.000835 max=0.000772 Jy/beam ! Clean residual mean=-0.000004 rms=0.000255 Jy/beam ! Combined flux in latest and established models = 0.19906 Jy keep ! Adding 282 model components to the UV plane model. ! The established model now contains 357 components and 0.19906 Jy ![Exited script file: muppet] wmap "J1130+0846_S_2015_01_22_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.049 x 11.2 at -30.64 degrees (North through East) ! Clean map min=-0.002558 max=0.18739 Jy/beam ! Writing clean map to FITS file: J1130+0846_S_2015_01_22_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.187387 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000254622 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.407641 0.407641 0.815282 1.63056 3.26113 6.52226 13.0445 26.089 52.1781 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.187 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.049 x 11.2 at -30.64 degrees (North through East) ! Clean map min=-0.002558 max=0.18739 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1130+0846_S_2015_01_22_pus_uvs.log closed on Tue Jan 3 22:51:34 2017