! Started logfile: J1129-4435_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:25:33 2017 obs J1129-4435_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J1129-4435_S_2014_01_04_pus_uva.fits ! AN table 1: 124 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.5 visibilities/baseline/integration-bin. ! Found source: J1129-4435 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 8928 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1129-4435_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 310 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 310 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 310 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 310 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.935193Jy sigma=0.006276 ! Fit after self-cal, rms=0.875464Jy sigma=0.005889 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.147 mas, bmaj=5.832 mas, bpa=-3.041 degrees ! Estimated noise=2076.29 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0991607 Jy ! Component: 100 - total flux cleaned = 0.12559 Jy ! Total flux subtracted in 100 components = 0.12559 Jy ! Clean residual min=-0.008539 max=0.012487 Jy/beam ! Clean residual mean=-0.000166 rms=0.002598 Jy/beam ! Combined flux in latest and established models = 0.12559 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.12559 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135118Jy sigma=0.000783 ! Fit after self-cal, rms=0.135052Jy sigma=0.000782 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.766 mas, bmaj=7.117 mas, bpa=-3.255 degrees ! Estimated noise=1134.88 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0199673 Jy ! Component: 100 - total flux cleaned = 0.0290918 Jy ! Component: 150 - total flux cleaned = 0.0334956 Jy ! Component: 200 - total flux cleaned = 0.0356556 Jy ! Total flux subtracted in 200 components = 0.0356556 Jy ! Clean residual min=-0.005971 max=0.007867 Jy/beam ! Clean residual mean=-0.000069 rms=0.001847 Jy/beam ! Combined flux in latest and established models = 0.161245 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 33 components and 0.161245 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132795Jy sigma=0.000759 ! Fit after self-cal, rms=0.132924Jy sigma=0.000758 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.88 KP 1.00* LA 1.00 ! MK 1.00 NL 1.43 OV 0.94 PT 1.00 ! SC 1.04 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 KP 1.00* LA 0.96 ! MK 1.00 NL 1.40 OV 0.98 PT 0.98 ! SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.16 KP 1.00* LA 0.82 ! MK 0.98 NL 1.30 OV 0.93 PT 1.00 ! SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 KP 1.00* LA 0.87 ! MK 1.04 NL 1.42 OV 0.97 PT 0.98 ! SC 0.93 ! ! ! Fit before self-cal, rms=0.132924Jy sigma=0.000758 ! Fit after self-cal, rms=0.137362Jy sigma=0.000748 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.778 mas, bmaj=7.122 mas, bpa=-2.765 degrees ! Estimated noise=1129.63 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000337345 Jy ! Component: 100 - total flux cleaned = 0.000420881 Jy ! Component: 150 - total flux cleaned = 0.000457447 Jy ! Component: 200 - total flux cleaned = 0.000490907 Jy ! Total flux subtracted in 200 components = 0.000490907 Jy ! Clean residual min=-0.003270 max=0.003355 Jy/beam ! Clean residual mean=0.000008 rms=0.000851 Jy/beam ! Combined flux in latest and established models = 0.161736 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 38 components and 0.161736 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137334Jy sigma=0.000747 ! Fit after self-cal, rms=0.137585Jy sigma=0.000747 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137585Jy sigma=0.000747 ! Fit after self-cal, rms=0.140320Jy sigma=0.000746 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.777 mas, bmaj=7.174 mas, bpa=-2.949 degrees ! Estimated noise=1133.74 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000209133 Jy ! Component: 100 - total flux cleaned = 0.000264009 Jy ! Component: 150 - total flux cleaned = 0.0003366 Jy ! Component: 200 - total flux cleaned = 0.000379668 Jy ! Total flux subtracted in 200 components = 0.000379668 Jy ! Clean residual min=-0.003160 max=0.003175 Jy/beam ! Clean residual mean=0.000008 rms=0.000769 Jy/beam ! Combined flux in latest and established models = 0.162116 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 43 components and 0.162116 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140310Jy sigma=0.000746 ! Fit after self-cal, rms=0.140352Jy sigma=0.000746 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.50793e-05 Jy ! Component: 100 - total flux cleaned = 9.50497e-05 Jy ! Component: 150 - total flux cleaned = 0.000113647 Jy ! Component: 200 - total flux cleaned = 0.000130613 Jy ! Total flux subtracted in 200 components = 0.000130613 Jy ! Clean residual min=-0.003118 max=0.003147 Jy/beam ! Clean residual mean=0.000009 rms=0.000771 Jy/beam ! Combined flux in latest and established models = 0.162246 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 45 components and 0.162246 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140344Jy sigma=0.000746 ! Fit after self-cal, rms=0.140347Jy sigma=0.000746 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140347Jy sigma=0.000746 ! Fit after self-cal, rms=0.141128Jy sigma=0.000746 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.774 mas, bmaj=7.196 mas, bpa=-2.965 degrees ! Estimated noise=1135.08 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000235017 Jy ! Component: 100 - total flux cleaned = 0.000280384 Jy ! Component: 150 - total flux cleaned = 0.000340283 Jy ! Component: 200 - total flux cleaned = 0.000375487 Jy ! Total flux subtracted in 200 components = 0.000375487 Jy ! Clean residual min=-0.003105 max=0.003114 Jy/beam ! Clean residual mean=0.000007 rms=0.000763 Jy/beam ! Combined flux in latest and established models = 0.162622 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 45 components and 0.162622 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141120Jy sigma=0.000746 ! Fit after self-cal, rms=0.141129Jy sigma=0.000746 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.2208e-05 Jy ! Component: 100 - total flux cleaned = 0.000114554 Jy ! Component: 150 - total flux cleaned = 0.000129534 Jy ! Component: 200 - total flux cleaned = 0.000143575 Jy ! Total flux subtracted in 200 components = 0.000143575 Jy ! Clean residual min=-0.003097 max=0.003106 Jy/beam ! Clean residual mean=0.000009 rms=0.000764 Jy/beam ! Combined flux in latest and established models = 0.162766 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 45 components and 0.162766 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141123Jy sigma=0.000746 ! Fit after self-cal, rms=0.141127Jy sigma=0.000746 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141127Jy sigma=0.000746 ! Fit after self-cal, rms=0.141469Jy sigma=0.000746 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.382 mas, bmaj=24.95 mas, bpa=1.736 degrees ! Estimated noise=1480.02 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.2097e-05 Jy ! Component: 100 - total flux cleaned = 5.19625e-05 Jy ! Component: 150 - total flux cleaned = 5.16693e-05 Jy ! Component: 200 - total flux cleaned = 4.57168e-05 Jy ! Total flux subtracted in 200 components = 4.57168e-05 Jy ! Clean residual min=-0.002660 max=0.002565 Jy/beam ! Clean residual mean=0.000011 rms=0.000881 Jy/beam ! Combined flux in latest and established models = 0.162811 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 46 components and 0.162811 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141468Jy sigma=0.000746 ! Fit after self-cal, rms=0.141474Jy sigma=0.000746 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.07534e-05 Jy ! Component: 100 - total flux cleaned = -3.10822e-05 Jy ! Component: 150 - total flux cleaned = -3.72771e-05 Jy ! Component: 200 - total flux cleaned = -3.77466e-05 Jy ! Total flux subtracted in 200 components = -3.77466e-05 Jy ! Clean residual min=-0.002662 max=0.002561 Jy/beam ! Clean residual mean=0.000010 rms=0.000882 Jy/beam ! Combined flux in latest and established models = 0.162773 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 46 components and 0.162773 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141474Jy sigma=0.000746 ! Fit after self-cal, rms=0.141473Jy sigma=0.000746 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.77 mas, bmaj=7.207 mas, bpa=-2.951 degrees ! Estimated noise=1135.7 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.77 x 7.207 at -2.951 degrees (North through East) ! Clean map min=-0.0029284 max=0.13463 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.152 mas, bmaj=5.92 mas, bpa=-2.755 degrees ! Estimated noise=2075.38 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0981297 Jy ! Component: 100 - total flux cleaned = 0.12495 Jy ! Component: 150 - total flux cleaned = 0.139253 Jy ! Component: 200 - total flux cleaned = 0.148327 Jy ! Total flux subtracted in 200 components = 0.148327 Jy ! Clean residual min=-0.005547 max=0.005673 Jy/beam ! Clean residual mean=-0.000052 rms=0.001484 Jy/beam ! Combined flux in latest and established models = 0.148327 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.148327 Jy ! Inverting map and beam ! Estimated beam: bmin=2.77 mas, bmaj=7.207 mas, bpa=-2.951 degrees ! Estimated noise=1135.7 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00855235 Jy ! Component: 100 - total flux cleaned = 0.0122811 Jy ! Component: 150 - total flux cleaned = 0.0140587 Jy ! Component: 200 - total flux cleaned = 0.0145473 Jy ! Total flux subtracted in 200 components = 0.0145473 Jy ! Clean residual min=-0.003501 max=0.003120 Jy/beam ! Clean residual mean=0.000005 rms=0.000779 Jy/beam ! Combined flux in latest and established models = 0.162874 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 36 components and 0.162874 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.382 mas, bmaj=24.95 mas, bpa=1.736 degrees ! Estimated noise=1480.02 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.15689e-05 Jy ! Component: 100 - total flux cleaned = -1.14946e-05 Jy ! Component: 150 - total flux cleaned = -1.16536e-05 Jy ! Component: 200 - total flux cleaned = -1.18527e-05 Jy ! Total flux subtracted in 200 components = -1.18527e-05 Jy ! Clean residual min=-0.002645 max=0.002554 Jy/beam ! Clean residual mean=0.000012 rms=0.000887 Jy/beam ! Combined flux in latest and established models = 0.162862 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.39168e-07 Jy ! Component: 100 - total flux cleaned = -7.90771e-06 Jy ! Component: 150 - total flux cleaned = -1.45379e-05 Jy ! Component: 200 - total flux cleaned = -1.51896e-05 Jy ! Total flux subtracted in 200 components = -1.51896e-05 Jy ! Clean residual min=-0.002649 max=0.002577 Jy/beam ! Clean residual mean=0.000012 rms=0.000886 Jy/beam ! Combined flux in latest and established models = 0.162847 Jy ! Adding 6 model components to the UV plane model. ! The established model now contains 39 components and 0.162847 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.77 mas, bmaj=7.207 mas, bpa=-2.951 degrees ! Estimated noise=1135.7 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000213964 Jy ! Component: 100 - total flux cleaned = 0.000261936 Jy ! Component: 150 - total flux cleaned = 0.000305839 Jy ! Component: 200 - total flux cleaned = 0.000346034 Jy ! Total flux subtracted in 200 components = 0.000346034 Jy ! Clean residual min=-0.003336 max=0.003126 Jy/beam ! Clean residual mean=0.000008 rms=0.000775 Jy/beam ! Combined flux in latest and established models = 0.163193 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 44 components and 0.163193 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141491Jy sigma=0.000746 ! Fit after self-cal, rms=0.141474Jy sigma=0.000746 wmodel J1129-4435_S_2014_01_04_pus_map.mod ! Writing 44 model components to file: J1129-4435_S_2014_01_04_pus_map.mod wobs J1129-4435_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J1129-4435_S_2014_01_04_pus_uvs.fits wwins J1129-4435_S_2014_01_04_pus_map.win ! wwins: Wrote 1 windows to J1129-4435_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 5.75041e-05 Jy ! Component: 100 - total flux cleaned = -4.91254e-05 Jy ! Component: 150 - total flux cleaned = 9.81935e-05 Jy ! Component: 200 - total flux cleaned = 0.000287502 Jy ! Component: 250 - total flux cleaned = 0.000648533 Jy ! Component: 300 - total flux cleaned = 0.000908888 Jy ! Component: 350 - total flux cleaned = 0.00115997 Jy ! Component: 400 - total flux cleaned = 0.00136205 Jy ! Component: 450 - total flux cleaned = 0.00151843 Jy ! Component: 500 - total flux cleaned = 0.00170951 Jy ! Component: 550 - total flux cleaned = 0.00193076 Jy ! Component: 600 - total flux cleaned = 0.00196656 Jy ! Component: 650 - total flux cleaned = 0.00210459 Jy ! Component: 700 - total flux cleaned = 0.00220571 Jy ! Component: 750 - total flux cleaned = 0.00243677 Jy ! Component: 800 - total flux cleaned = 0.0024687 Jy ! Component: 850 - total flux cleaned = 0.00259618 Jy ! Component: 900 - total flux cleaned = 0.00265891 Jy ! Component: 950 - total flux cleaned = 0.00284328 Jy ! Component: 1000 - total flux cleaned = 0.00293345 Jy ! Component: 1050 - total flux cleaned = 0.00305246 Jy ! Component: 1100 - total flux cleaned = 0.00331439 Jy ! Component: 1150 - total flux cleaned = 0.00345745 Jy ! Component: 1200 - total flux cleaned = 0.00351415 Jy ! Component: 1250 - total flux cleaned = 0.00370885 Jy ! Component: 1300 - total flux cleaned = 0.00379146 Jy ! Component: 1350 - total flux cleaned = 0.00390045 Jy ! Component: 1400 - total flux cleaned = 0.00406109 Jy ! Component: 1450 - total flux cleaned = 0.00414048 Jy ! Component: 1500 - total flux cleaned = 0.00427107 Jy ! Component: 1550 - total flux cleaned = 0.00434854 Jy ! Component: 1600 - total flux cleaned = 0.00450174 Jy ! Component: 1650 - total flux cleaned = 0.00450187 Jy ! Component: 1700 - total flux cleaned = 0.00460193 Jy ! Component: 1750 - total flux cleaned = 0.00470048 Jy ! Component: 1800 - total flux cleaned = 0.00470046 Jy ! Component: 1850 - total flux cleaned = 0.00477297 Jy ! Component: 1900 - total flux cleaned = 0.00477276 Jy ! Component: 1950 - total flux cleaned = 0.00482012 Jy ! Component: 2000 - total flux cleaned = 0.00491404 Jy ! Component: 2050 - total flux cleaned = 0.00491412 Jy ! Component: 2100 - total flux cleaned = 0.00500612 Jy ! Component: 2150 - total flux cleaned = 0.00502868 Jy ! Component: 2200 - total flux cleaned = 0.00502866 Jy ! Component: 2250 - total flux cleaned = 0.00511787 Jy ! Component: 2300 - total flux cleaned = 0.00511786 Jy ! Component: 2350 - total flux cleaned = 0.00509577 Jy ! Component: 2400 - total flux cleaned = 0.00509577 Jy ! Component: 2450 - total flux cleaned = 0.00513872 Jy ! Component: 2500 - total flux cleaned = 0.00507448 Jy ! Component: 2550 - total flux cleaned = 0.00505317 Jy ! Component: 2600 - total flux cleaned = 0.00505316 Jy ! Component: 2650 - total flux cleaned = 0.00507389 Jy ! Component: 2700 - total flux cleaned = 0.00503222 Jy ! Component: 2750 - total flux cleaned = 0.00505311 Jy ! Component: 2800 - total flux cleaned = 0.00509423 Jy ! Component: 2850 - total flux cleaned = 0.00513516 Jy ! Component: 2900 - total flux cleaned = 0.00509478 Jy ! Component: 2950 - total flux cleaned = 0.00505457 Jy ! Component: 3000 - total flux cleaned = 0.00505467 Jy ! Component: 3050 - total flux cleaned = 0.00505465 Jy ! Component: 3100 - total flux cleaned = 0.00501485 Jy ! Component: 3150 - total flux cleaned = 0.00503437 Jy ! Component: 3200 - total flux cleaned = 0.00507336 Jy ! Component: 3250 - total flux cleaned = 0.00517098 Jy ! Component: 3300 - total flux cleaned = 0.00519044 Jy ! Component: 3350 - total flux cleaned = 0.00528708 Jy ! Component: 3400 - total flux cleaned = 0.00530623 Jy ! Component: 3450 - total flux cleaned = 0.00536372 Jy ! Component: 3500 - total flux cleaned = 0.00530649 Jy ! Component: 3550 - total flux cleaned = 0.0053636 Jy ! Component: 3600 - total flux cleaned = 0.00543943 Jy ! Component: 3650 - total flux cleaned = 0.0054583 Jy ! Component: 3700 - total flux cleaned = 0.00545827 Jy ! Component: 3750 - total flux cleaned = 0.00551471 Jy ! Component: 3800 - total flux cleaned = 0.00557094 Jy ! Component: 3850 - total flux cleaned = 0.00562702 Jy ! Component: 3900 - total flux cleaned = 0.00562711 Jy ! Component: 3950 - total flux cleaned = 0.00568297 Jy ! Component: 4000 - total flux cleaned = 0.00566437 Jy ! Component: 4050 - total flux cleaned = 0.00573866 Jy ! Total flux subtracted in 4096 components = 0.00572009 Jy ! Clean residual min=-0.001088 max=0.001413 Jy/beam ! Clean residual mean=-0.000008 rms=0.000314 Jy/beam ! Combined flux in latest and established models = 0.168913 Jy keep ! Adding 210 model components to the UV plane model. ! The established model now contains 254 components and 0.168913 Jy ![Exited script file: muppet] wmap "J1129-4435_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.77 x 7.207 at -2.951 degrees (North through East) ! Clean map min=-0.0022091 max=0.13355 Jy/beam ! Writing clean map to FITS file: J1129-4435_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.133549 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000307184 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.690048 0.690048 1.3801 2.76019 5.52038 11.0408 22.0815 44.1631 88.3261 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.133 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.77 x 7.207 at -2.951 degrees (North through East) ! Clean map min=-0.0022091 max=0.13355 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1129-4435_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:25:38 2017