! Started logfile: J1129-3707_S_2014_08_09_pus_uvs.log on Tue Nov 29 23:03:36 2016 obs J1129-3707_S_2014_08_09_pus_uva.fits ! Reading UV FITS file: J1129-3707_S_2014_08_09_pus_uva.fits ! AN table 1: 114 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.695712 visibilities/baseline/integration-bin. ! Found source: J1129-3707 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 342 lines of history. ! ! Reading 14276 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1129-3707_S_2014_08_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 187 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 187 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 187 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 187 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.865894Jy sigma=0.006236 ! Fit after self-cal, rms=0.778876Jy sigma=0.005604 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.64 mas, bmaj=8.074 mas, bpa=-1.105 degrees ! Estimated noise=1643.28 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.175452 Jy ! Component: 100 - total flux cleaned = 0.218864 Jy ! Total flux subtracted in 100 components = 0.218864 Jy ! Clean residual min=-0.010754 max=0.022855 Jy/beam ! Clean residual mean=-0.000042 rms=0.003163 Jy/beam ! Combined flux in latest and established models = 0.218864 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.218864 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126427Jy sigma=0.000842 ! Fit after self-cal, rms=0.126430Jy sigma=0.000842 ! Inverting map ! Added new window around map position (6, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0234375 Jy ! Component: 100 - total flux cleaned = 0.0363342 Jy ! Total flux subtracted in 100 components = 0.0363342 Jy ! Clean residual min=-0.008060 max=0.016335 Jy/beam ! Clean residual mean=-0.000011 rms=0.002323 Jy/beam ! Combined flux in latest and established models = 0.255198 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 15 components and 0.255198 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121903Jy sigma=0.000806 ! Fit after self-cal, rms=0.121514Jy sigma=0.000803 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.275 mas, bmaj=9.891 mas, bpa=-0.1801 degrees ! Estimated noise=830.758 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4.5, 5.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0124867 Jy ! Component: 100 - total flux cleaned = 0.0194371 Jy ! Component: 150 - total flux cleaned = 0.0236721 Jy ! Component: 200 - total flux cleaned = 0.0258669 Jy ! Total flux subtracted in 200 components = 0.0258669 Jy ! Clean residual min=-0.008494 max=0.006111 Jy/beam ! Clean residual mean=0.000002 rms=0.001533 Jy/beam ! Combined flux in latest and established models = 0.281065 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 57 components and 0.281065 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119977Jy sigma=0.000795 ! Fit after self-cal, rms=0.120011Jy sigma=0.000794 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.86 HN 1.13 KP 1.06 ! LA 1.10 MK 1.00 NL 1.08 OV 0.95 ! PT 1.05 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.03 HN 1.13 KP 1.01 ! LA 1.05 MK 1.00 NL 1.09 OV 0.98 ! PT 1.01 SC 1.07 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.16 HN 1.15 KP 0.92 ! LA 0.84 MK 1.03 NL 1.09 OV 0.91 ! PT 0.99 SC 1.04 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 1.04 HN 1.17 KP 0.87 ! LA 0.82 MK 1.01 NL 1.14 OV 0.96 ! PT 1.05 SC 0.99 ! ! ! Fit before self-cal, rms=0.120011Jy sigma=0.000794 ! Fit after self-cal, rms=0.120270Jy sigma=0.000769 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.29 mas, bmaj=9.923 mas, bpa=-0.09839 degrees ! Estimated noise=842.447 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00349712 Jy ! Component: 100 - total flux cleaned = -0.00447375 Jy ! Component: 150 - total flux cleaned = -0.00503198 Jy ! Component: 200 - total flux cleaned = -0.00524261 Jy ! Total flux subtracted in 200 components = -0.00524261 Jy ! Clean residual min=-0.004743 max=0.003313 Jy/beam ! Clean residual mean=0.000025 rms=0.000916 Jy/beam ! Combined flux in latest and established models = 0.275822 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 86 components and 0.275822 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120132Jy sigma=0.000768 ! Fit after self-cal, rms=0.120180Jy sigma=0.000768 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120180Jy sigma=0.000768 ! Fit after self-cal, rms=0.121260Jy sigma=0.000767 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.296 mas, bmaj=9.931 mas, bpa=-0.1069 degrees ! Estimated noise=841.695 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00256841 Jy ! Component: 100 - total flux cleaned = -0.00314182 Jy ! Component: 150 - total flux cleaned = -0.00349515 Jy ! Component: 200 - total flux cleaned = -0.00370316 Jy ! Total flux subtracted in 200 components = -0.00370316 Jy ! Clean residual min=-0.003926 max=0.002846 Jy/beam ! Clean residual mean=0.000023 rms=0.000772 Jy/beam ! Combined flux in latest and established models = 0.272119 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 102 components and 0.272119 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121186Jy sigma=0.000766 ! Fit after self-cal, rms=0.121197Jy sigma=0.000766 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000111745 Jy ! Component: 100 - total flux cleaned = -0.00019981 Jy ! Component: 150 - total flux cleaned = -0.000282054 Jy ! Component: 200 - total flux cleaned = -0.000358208 Jy ! Total flux subtracted in 200 components = -0.000358208 Jy ! Clean residual min=-0.003911 max=0.002812 Jy/beam ! Clean residual mean=0.000023 rms=0.000759 Jy/beam ! Combined flux in latest and established models = 0.271761 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 107 components and 0.271761 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121170Jy sigma=0.000766 ! Fit after self-cal, rms=0.121167Jy sigma=0.000766 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121167Jy sigma=0.000766 ! Fit after self-cal, rms=0.122322Jy sigma=0.000765 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.299 mas, bmaj=9.935 mas, bpa=-0.09031 degrees ! Estimated noise=841.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00176322 Jy ! Component: 100 - total flux cleaned = -0.00233949 Jy ! Component: 150 - total flux cleaned = -0.00253482 Jy ! Component: 200 - total flux cleaned = -0.0026731 Jy ! Total flux subtracted in 200 components = -0.0026731 Jy ! Clean residual min=-0.003280 max=0.002873 Jy/beam ! Clean residual mean=0.000021 rms=0.000701 Jy/beam ! Combined flux in latest and established models = 0.269088 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 119 components and 0.269088 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122289Jy sigma=0.000765 ! Fit after self-cal, rms=0.122304Jy sigma=0.000765 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00014669 Jy ! Component: 100 - total flux cleaned = -0.000177454 Jy ! Component: 150 - total flux cleaned = -0.000234833 Jy ! Component: 200 - total flux cleaned = -0.000288001 Jy ! Total flux subtracted in 200 components = -0.000288001 Jy ! Clean residual min=-0.003240 max=0.002882 Jy/beam ! Clean residual mean=0.000021 rms=0.000694 Jy/beam ! Combined flux in latest and established models = 0.2688 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 127 components and 0.2688 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122292Jy sigma=0.000765 ! Fit after self-cal, rms=0.122289Jy sigma=0.000765 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122289Jy sigma=0.000765 ! Fit after self-cal, rms=0.123026Jy sigma=0.000765 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.612 mas, bmaj=27.27 mas, bpa=-2.22 degrees ! Estimated noise=1006.41 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00150472 Jy ! Component: 100 - total flux cleaned = -0.00229523 Jy ! Component: 150 - total flux cleaned = -0.00257668 Jy ! Component: 200 - total flux cleaned = -0.00267232 Jy ! Total flux subtracted in 200 components = -0.00267232 Jy ! Clean residual min=-0.003800 max=0.002589 Jy/beam ! Clean residual mean=0.000030 rms=0.000809 Jy/beam ! Combined flux in latest and established models = 0.266127 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 139 components and 0.266127 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123023Jy sigma=0.000765 ! Fit after self-cal, rms=0.123032Jy sigma=0.000765 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000101493 Jy ! Component: 100 - total flux cleaned = -0.000145232 Jy ! Component: 150 - total flux cleaned = -0.000171272 Jy ! Component: 200 - total flux cleaned = -0.000195355 Jy ! Total flux subtracted in 200 components = -0.000195355 Jy ! Clean residual min=-0.003782 max=0.002575 Jy/beam ! Clean residual mean=0.000030 rms=0.000806 Jy/beam ! Combined flux in latest and established models = 0.265932 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 145 components and 0.265932 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123030Jy sigma=0.000765 ! Fit after self-cal, rms=0.123030Jy sigma=0.000765 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.302 mas, bmaj=9.943 mas, bpa=-0.07127 degrees ! Estimated noise=840.91 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.302 x 9.943 at -0.07127 degrees (North through East) ! Clean map min=-0.0029158 max=0.21288 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.646 mas, bmaj=8.052 mas, bpa=-0.8465 degrees ! Estimated noise=1675.64 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.178469 Jy ! Component: 100 - total flux cleaned = 0.222163 Jy ! Component: 150 - total flux cleaned = 0.241756 Jy ! Component: 200 - total flux cleaned = 0.252631 Jy ! Total flux subtracted in 200 components = 0.252631 Jy ! Clean residual min=-0.004713 max=0.007937 Jy/beam ! Clean residual mean=-0.000007 rms=0.001309 Jy/beam ! Combined flux in latest and established models = 0.252631 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.252631 Jy ! Inverting map and beam ! Estimated beam: bmin=3.302 mas, bmaj=9.943 mas, bpa=-0.07127 degrees ! Estimated noise=840.91 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1, -14.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00769617 Jy ! Component: 100 - total flux cleaned = 0.0113064 Jy ! Component: 150 - total flux cleaned = 0.0130875 Jy ! Component: 200 - total flux cleaned = 0.0132619 Jy ! Total flux subtracted in 200 components = 0.0132619 Jy ! Clean residual min=-0.003164 max=0.002648 Jy/beam ! Clean residual mean=0.000018 rms=0.000699 Jy/beam ! Combined flux in latest and established models = 0.265893 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 49 components and 0.265893 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.612 mas, bmaj=27.27 mas, bpa=-2.22 degrees ! Estimated noise=1006.41 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000530699 Jy ! Component: 100 - total flux cleaned = 0.000413209 Jy ! Component: 150 - total flux cleaned = 0.000307416 Jy ! Component: 200 - total flux cleaned = 0.000184436 Jy ! Total flux subtracted in 200 components = 0.000184436 Jy ! Clean residual min=-0.003966 max=0.002706 Jy/beam ! Clean residual mean=0.000032 rms=0.000826 Jy/beam ! Combined flux in latest and established models = 0.266078 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.57414e-05 Jy ! Component: 100 - total flux cleaned = -0.000133486 Jy ! Component: 150 - total flux cleaned = -0.000180176 Jy ! Component: 200 - total flux cleaned = -0.000222566 Jy ! Total flux subtracted in 200 components = -0.000222566 Jy ! Clean residual min=-0.003942 max=0.002646 Jy/beam ! Clean residual mean=0.000031 rms=0.000817 Jy/beam ! Combined flux in latest and established models = 0.265855 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 68 components and 0.265855 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.302 mas, bmaj=9.943 mas, bpa=-0.07127 degrees ! Estimated noise=840.91 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00011746 Jy ! Component: 100 - total flux cleaned = 0.00012007 Jy ! Component: 150 - total flux cleaned = 0.000120021 Jy ! Component: 200 - total flux cleaned = 8.42741e-05 Jy ! Total flux subtracted in 200 components = 8.42741e-05 Jy ! Clean residual min=-0.003112 max=0.002438 Jy/beam ! Clean residual mean=0.000019 rms=0.000667 Jy/beam ! Combined flux in latest and established models = 0.265939 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 82 components and 0.265939 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123022Jy sigma=0.000765 ! Fit after self-cal, rms=0.123011Jy sigma=0.000765 wmodel J1129-3707_S_2014_08_09_pus_map.mod ! Writing 82 model components to file: J1129-3707_S_2014_08_09_pus_map.mod wobs J1129-3707_S_2014_08_09_pus_uvs.fits ! Writing UV FITS file: J1129-3707_S_2014_08_09_pus_uvs.fits wwins J1129-3707_S_2014_08_09_pus_map.win ! wwins: Wrote 4 windows to J1129-3707_S_2014_08_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000917822 Jy ! Component: 100 - total flux cleaned = -0.000782741 Jy ! Component: 150 - total flux cleaned = -0.000783048 Jy ! Component: 200 - total flux cleaned = -0.000592569 Jy ! Component: 250 - total flux cleaned = -0.000739172 Jy ! Component: 300 - total flux cleaned = -0.000809091 Jy ! Component: 350 - total flux cleaned = -0.000843511 Jy ! Component: 400 - total flux cleaned = -0.00104466 Jy ! Component: 450 - total flux cleaned = -0.00104333 Jy ! Component: 500 - total flux cleaned = -0.00107494 Jy ! Component: 550 - total flux cleaned = -0.00107384 Jy ! Component: 600 - total flux cleaned = -0.000981527 Jy ! Component: 650 - total flux cleaned = -0.000921651 Jy ! Component: 700 - total flux cleaned = -0.000892257 Jy ! Component: 750 - total flux cleaned = -0.000834369 Jy ! Component: 800 - total flux cleaned = -0.000806064 Jy ! Component: 850 - total flux cleaned = -0.000750156 Jy ! Component: 900 - total flux cleaned = -0.000614007 Jy ! Component: 950 - total flux cleaned = -0.000560684 Jy ! Component: 1000 - total flux cleaned = -0.000639313 Jy ! Component: 1050 - total flux cleaned = -0.000560865 Jy ! Component: 1100 - total flux cleaned = -0.000535117 Jy ! Component: 1150 - total flux cleaned = -0.000559457 Jy ! Component: 1200 - total flux cleaned = -0.000460592 Jy ! Component: 1250 - total flux cleaned = -0.000484894 Jy ! Component: 1300 - total flux cleaned = -0.000484381 Jy ! Component: 1350 - total flux cleaned = -0.000390126 Jy ! Component: 1400 - total flux cleaned = -0.000390754 Jy ! Component: 1450 - total flux cleaned = -0.000436656 Jy ! Component: 1500 - total flux cleaned = -0.000391566 Jy ! Component: 1550 - total flux cleaned = -0.000391672 Jy ! Component: 1600 - total flux cleaned = -0.000369694 Jy ! Component: 1650 - total flux cleaned = -0.000282637 Jy ! Component: 1700 - total flux cleaned = -0.000282603 Jy ! Component: 1750 - total flux cleaned = -0.000176536 Jy ! Component: 1800 - total flux cleaned = -9.28299e-05 Jy ! Component: 1850 - total flux cleaned = 1.01842e-05 Jy ! Component: 1900 - total flux cleaned = 3.03373e-05 Jy ! Component: 1950 - total flux cleaned = 5.04494e-05 Jy ! Component: 2000 - total flux cleaned = 0.000130519 Jy ! Component: 2050 - total flux cleaned = 0.00024899 Jy ! Component: 2100 - total flux cleaned = 0.000327288 Jy ! Component: 2150 - total flux cleaned = 0.000404889 Jy ! Component: 2200 - total flux cleaned = 0.000481602 Jy ! Component: 2250 - total flux cleaned = 0.000576384 Jy ! Component: 2300 - total flux cleaned = 0.000632804 Jy ! Component: 2350 - total flux cleaned = 0.000725507 Jy ! Component: 2400 - total flux cleaned = 0.000835671 Jy ! Component: 2450 - total flux cleaned = 0.000908522 Jy ! Component: 2500 - total flux cleaned = 0.000962682 Jy ! Component: 2550 - total flux cleaned = 0.00106972 Jy ! Component: 2600 - total flux cleaned = 0.0011405 Jy ! Component: 2650 - total flux cleaned = 0.0011928 Jy ! Component: 2700 - total flux cleaned = 0.00124475 Jy ! Component: 2750 - total flux cleaned = 0.00131333 Jy ! Component: 2800 - total flux cleaned = 0.0013134 Jy ! Component: 2850 - total flux cleaned = 0.00133035 Jy ! Component: 2900 - total flux cleaned = 0.0013805 Jy ! Component: 2950 - total flux cleaned = 0.00138067 Jy ! Component: 3000 - total flux cleaned = 0.00146269 Jy ! Component: 3050 - total flux cleaned = 0.00149513 Jy ! Component: 3100 - total flux cleaned = 0.0015111 Jy ! Component: 3150 - total flux cleaned = 0.00152716 Jy ! Component: 3200 - total flux cleaned = 0.00147969 Jy ! Component: 3250 - total flux cleaned = 0.00157403 Jy ! Component: 3300 - total flux cleaned = 0.00158938 Jy ! Component: 3350 - total flux cleaned = 0.00155831 Jy ! Component: 3400 - total flux cleaned = 0.00157379 Jy ! Component: 3450 - total flux cleaned = 0.00157387 Jy ! Component: 3500 - total flux cleaned = 0.00163429 Jy ! Component: 3550 - total flux cleaned = 0.00160449 Jy ! Component: 3600 - total flux cleaned = 0.00158956 Jy ! Component: 3650 - total flux cleaned = 0.00164851 Jy ! Component: 3700 - total flux cleaned = 0.00161908 Jy ! Component: 3750 - total flux cleaned = 0.00157549 Jy ! Component: 3800 - total flux cleaned = 0.00160436 Jy ! Component: 3850 - total flux cleaned = 0.00160434 Jy ! Component: 3900 - total flux cleaned = 0.00157599 Jy ! Component: 3950 - total flux cleaned = 0.00157616 Jy ! Component: 4000 - total flux cleaned = 0.00157613 Jy ! Component: 4050 - total flux cleaned = 0.00161797 Jy ! Total flux subtracted in 4096 components = 0.0015904 Jy ! Clean residual min=-0.001177 max=0.000813 Jy/beam ! Clean residual mean=0.000004 rms=0.000267 Jy/beam ! Combined flux in latest and established models = 0.26753 Jy keep ! Adding 318 model components to the UV plane model. ! The established model now contains 400 components and 0.26753 Jy ![Exited script file: muppet] wmap "J1129-3707_S_2014_08_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.302 x 9.943 at -0.07127 degrees (North through East) ! Clean map min=-0.0026287 max=0.21857 Jy/beam ! Writing clean map to FITS file: J1129-3707_S_2014_08_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.218567 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000265698 device "J1129-3707_S_2014_08_09_pus\_map.eps/VPS" ! Attempting to open device: 'J1129-3707_S_2014_08_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.364691 0.364691 0.729383 1.45877 2.91753 5.83506 11.6701 23.3403 46.6805 93.361 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.218 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.302 x 9.943 at -0.07127 degrees (North through East) ! Clean map min=-0.0026287 max=0.21857 Jy/beam quit ! Quitting program ! Log file J1129-3707_S_2014_08_09_pus_uvs.log closed on Tue Nov 29 23:03:41 2016